Search results: x1

Sort order

9,035 models

P
PrintablesMiklos Kiszely

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…

Downloads
118,191
Likes
19,105
Rating
4.68
P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Downloads
73,270
Likes
11,289
Rating
4.85
P
PrintablesHector

Nasa chainmail (4x4, 8x8, 12x16 and 32x34)

Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…

Downloads
67,230
Likes
13,125
Rating
4.86
P
Printablesthrutheframe

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…

Downloads
43,320
Likes
4,636
Rating
4.91
P
Printablescleberlop

Bambu Lab Purge/Flush/Poop💩 bucket for X1 or X1 Carbon

Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…

Downloads
35,730
Likes
2,727
Rating
4.95
P
PrintablesPointNemo

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Downloads
30,301
Likes
12,817
Rating
4.9

Bambu Lab - Filament Poop Bin - X1C P1S and P2S

This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…

Downloads
24,061
Likes
3,084
Rating
4.93
P
PrintablesOurAngryBadger

Bambu X1 PTFE Extruder Bracket AMS Error Fix

Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…

Downloads
24,047
Likes
2,872
Rating
4.75
P
PrintablesGuyH

Bambu Lab X1C P1P P1S Filapoop scoop base insert | Plastic ramp for debris removal | NEW v3 update!

UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…

Downloads
21,165
Likes
2,570
Rating
4.85
P
Printableseds_3d_shop

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Downloads
19,241
Likes
1,519
Rating
4.91
P
PrintablesZzoyozZ

Bowden Y-Splitter for Bambu Lab X1

Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…

Downloads
17,345
Likes
1,709
Rating
4.77
P
PrintablesAlvin Pan

Bambu Lab X1C plate holder

Remix from original model to fit the plate for Bambu Lab X1C. File uploaded is meant to be opened in Bambu Slicer. [Update] Added stl file for other slicers. Realise that some will want to print this in anticipation for the arrival of…

Downloads
16,963
Likes
1,720
Rating
4.93
P
Printablesflorian greco

Bambu Lab X1 X1C - TPU preset

Hi Everyone, I had trouble having a decent print finish with the official bambu lab and generic preset. After dozen of trials and errors, I finally managed to get great results with TPU. I included the 3MF file for bambu studio with all…

Downloads
16,578
Likes
965
Rating
4.9
P
Printableselumspe

Build Plate ArUco (QR alike) code for Bambu Lab X1C

Print this guiding template for easy placement: 0.20mm Standard @BBL X1C Place diagonally PLA Follow this picture for sticker placement: QR code for all Bambu Lab build plates: Textured plate High-Temperature plate Engineering plate Cool…

Downloads
15,613
Likes
1,805
Rating
4.93
P
PrintablesMikyleee

Bambu Lab - Poop Bucket, Filament Waste Bin - X1 and X1 Carbon

UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…

Downloads
15,389
Likes
781
Rating
4.77
P
Printableseds_3d_shop

Wide Version of Bambu Lab Magnetic Purge Poop Slide for X1C / P1S (side collection of poop, perfect for cabinet!)

My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…

Downloads
13,609
Likes
735
Rating
5
P
Printableseds_3d_shop

Refillable Charcoal / Activated Carbon Filter Replacement for Bambulab X1 / P1S / Upgraded P1P

Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…

Downloads
13,226
Likes
767
Rating
5
P
PrintablesBoogie

First layer test 100x100 mm square

First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square

Downloads
13,201
Likes
207
Rating
4.89
P
PrintablesCoffey72

Bambu labs Tool Box X1C P1P (the original)

I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…

Downloads
12,595
Likes
2,444
Rating
4.89
P
PrintablesDiggle

Moai Standing Tissue Box (Fits X1/P1) 247mm Height

*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…

Downloads
11,635
Likes
4,481
Rating
4.96
P
PrintablesButcher9_9

Poop Chute with removable Basket - 3 Sizes for Bambu Lab X1C / P1P / P1S

A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…

Downloads
11,554
Likes
823
Rating
4.92
P
Printableskeenzkustoms

Bambu slicer max flow test tower for X1C

Max flow test for bambulab slicer WARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to…

Downloads
9,830
Likes
717
Rating
4.96
P
Printableskunaa

M3 hex screw and nut (M3x10, M3x15, M3x20, M3x25, M3x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
9,777
Likes
386
Rating
4.45
P
PrintablesAdam L

X1 / P1P PTFE Tube Guide to fix loading issues - best of both worlds

Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…

Downloads
8,239
Likes
1,336
Rating
4.94
P
PrintablesCake3d

Bambu Lab Carbon X1C X1 P1S P1P with AMS Top Tool Storage

EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…

Downloads
7,939
Likes
1,949
Rating
4.9
P
PrintablesBen

2mm wall Bambu Lab - Filament Poop Chute - X1, X1C and P1P, P1S

With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m

Downloads
7,572
Likes
473
Rating
5
P
PrintablesFatTony

V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!

Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…

Downloads
7,372
Likes
1,359
Rating
4.89
P
PrintablesJandrop

Bambu labs Tool Box X1C P1P with Bambu Logo

Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…

Downloads
7,317
Likes
2,220
Rating
4.89
P
PrintablesNivenante

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1 and P1 Series - Fullsize and Slim Version | UPDATE 2023.05.13

My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…

Downloads
7,233
Likes
722
Rating
4.91
P
PrintablesAlexM

BambuLab P1P, P1S, X1, X1C, X1E, A1 & A1 mini Temperature towers

For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…

Downloads
7,051
Likes
225
Rating
5
P
PrintablesOurAngryBadger

Bambu Studio OrcaSlicer / SoftFever Profiles for X1 Carbon

OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…

Downloads
6,979
Likes
673
Rating
4.96
P
PrintablesAdam L

- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…

Downloads
6,683
Likes
406
Rating
5
P
Printablesnilson_fx

Magnetic Poop Chute Bambu Lab P1P P1S P2S X1

13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…

Downloads
6,329
Likes
609
Rating
5
P
PrintablesIMPROV3D!

IMPROV3D! Adapterspule für Bambu Lab X1 AMS

Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…

Downloads
6,156
Likes
399
Rating
4.89
P
Printablesdkarjadi

DK Riser for Bambu Lab X1/P1

When I made / remixed my first Riser, it was out of personal necessity… because the built-in LED in BambuLab was not sufficient… and that low profile design turned out to be quite popular. Since then, a couple of users Qiao112 and Dan…

Downloads
5,863
Likes
1,330
Rating
4.97
P
PrintablesRockChewer

Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus

For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.

Downloads
5,822
Likes
166
Rating
5
P
PrintablesWorldspawn00

Star Wars Jedi: Fallen Order BD-1 Droid Card Kit for 4 color printing on Bambu X1/X1C or P1P with AMS

Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…

Downloads
5,693
Likes
1,909
Rating
5
P
Printablesmowcius

PrusaSlicer profile for Bambu Lab X1 Carbon (0.4mm) BS 01.02.00.09

This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…

Downloads
5,513
Likes
172
Rating
4.8
P
PrintablesAdam L

- PETG - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…

Downloads
5,167
Likes
506
Rating
4.62
P
PrintablesEd Johnson

Y-Splitter for the Bambu Lab X1C AMS

Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…

Downloads
5,037
Likes
600
Rating
4.81
P
PrintablesBryan Haven

Bambu Lab X1C plate holder Feet

Some feet for the Bambu Lab Plate Holder by Alvin Pan https://www.printables.com/model/270579-bambu-lab-x1c-plate-holder to help keep it from tipping over. Currently 60mm wide and friction fit but can be widened and glued if needed. STEP,…

Downloads
4,979
Likes
409
Rating
4.98
P
PrintablesMaxG

Detailed model of the Bambu Lab X1 Combo

A more detailed version of my previous model. I tried to incorporate as many details as possible in this one, which however makes it less suitable for printing sadly. This model includes: Detailed AMS system Exaust Fan Buildplate See…

Downloads
4,940
Likes
138
Rating
4.25
P
PrintablesOurAngryBadger

Bambu X1 Exhaust Muffler / Fan Silencer

Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…

Downloads
4,908
Likes
1,043
Rating
4.71
P
Printablesprint.tech3d

Bambu Lab X1 P1P P1S Anti Vibration Feet TPU Bambulab

V2 available here: https://makerworld.com/de/models/1577703-bambulab-anti-vibration-feet-v2-p1p-x1c-p1s-tpu#profileId-1660067 These are anti-vibration feet for the Bambu Lab X1/P1P, inspired by the original ones that can be bought in the…

Downloads
4,747
Likes
576
Rating
4.79
P
PrintablesDodoIsAlive

Bambu Lab Z axis cover for X1 / X1 Carbon

This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…

Downloads
4,686
Likes
965
Rating
4.87
P
Printablesmowcius

Bambu Lab X1 PTFE Minimum Radius Guide

11/11/22 - this model has been updated to a V2, as the V1 version was found in some instances to be making the problem it was designed to solve worse rather than better. V2 has a greater radius for the filament, less of a downwards angle…

Downloads
4,665
Likes
703
Rating
4.74
P
Printablesz3d

Bambu X1 Carbon Purge Chute Extension

Current Version (v3) Notes: Changed default model orientation on slicer import to reduce confusion and broken snap fits This model was designed to help reduce instances of purge waste being flung back into the print area. The models I…

Downloads
4,641
Likes
736
Rating
5
P
PrintablesK2ij3

Bambu Lab X1-Carbon / P1P / P2S Poop Shoot removable bucket

Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm

Downloads
4,611
Likes
427
Rating
4.93
P
PrintablesDutchWorkX3D

X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand

I designed v3 from scratch based on the v2 version. It now has more strength and more place for honeycomb / hex add-ons. I have added: Honeycomb / Hex Ledstrip holder Honeycomb / Hex Build plate holder Honeycomb / Hex Top glass holder I…

Downloads
4,525
Likes
1,390
Rating
4.86
P
Printableskunaa

M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
4,446
Likes
142
Rating
4.67
P
PrintablesAmaZz0r

DISCONTINUED - Cura for Bambu X1 and P1 Series

It seems as if this does not work flawlessly for everyone anymore. At the moment, I do not own a Bambu Lab Printer - therefore this project is no longer continued/updated and has not been updated for quite some time. For safety measures,…

Downloads
4,414
Likes
97
Rating
5
P
PrintablesMortalWombat

Bambu Lab X1 Vase Mode Filament Poop Bucket

Modeled from scratch in tinkercad based on measurements taken from Bifrost's purge bucket. Prints fast in vase mode with minimal material usage. Three variations provided. Note that I have not received my X1 yet, so I cannot promise it…

Downloads
4,375
Likes
383
Rating
4.76
P
PrintablesAdam L

- TPU/Flexible - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…

Downloads
4,357
Likes
419
Rating
5
P
Printablesmickmalik

Bambu Lab P1P/P1S/X1 poop chute

Garbage container for bambulab, using 6 neodymium magnets 8x2mm. The magnets must be installed using glue. Installation is made easier with positioning tabs.

Downloads
4,327
Likes
233
Rating
5
P
PrintablesLucoot

Bambu Lab X1 AMS Front Desiccant Holder

Should fit V1-V3 of the AMS. Printed in Black ABS. Sensor version needs support. Brim recommended since it is tall and narrow. Update: Version 2 w/increased desiccant volume.

Downloads
4,261
Likes
379
Rating
4.87
P

Activated Carbon Filter for Bambu Lab X1 Carbon 3D Printer

This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…

Downloads
4,204
Likes
686
Rating
4.65
P
PrintablesDesignByLibb

Stackable box 100x160x63

Layer - 0.2-0.3mm Walls - 2 Infill - 15% No support !

Downloads
4,133
Likes
1,184
Rating
5
P
PrintablesBrandon Raineri

Bambu Lab X1 Purge Bucket

12/22/2022 - Added Version 3 with increased backstop height for occasional purge miss. 10/13/2022 - Added Version 2 which has recessed for (2) 6mm x 3mm magnets.

Downloads
4,028
Likes
321
Rating
4.94
P
PrintablesKYZ Design

Honeycomb Storage Wall HSW - Bambu X1C/P1P Max Wall Piece

Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…

Downloads
4,018
Likes
720
Rating
5
P
PrintablesVelvia

Open 6x12, 6x17 and 6x24 Panoramic Camera

Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…

Downloads
3,965
Likes
528
Rating
5
P
Printableskrazyderek

Bambu Lab X1 - top glass lid cover riser holder shim air vent

Mirror both parts for a set of four. Print out of ASA or other material that will resist higher temperatures as needed. Can be easily modified by updating variables in onshape model. leg_length_a 60 (min: 20mm more contact area on glass…

Downloads
3,935
Likes
449
Rating
4.91
P
PrintablesRecticle

Airsoft Suppressor SOCOM 2 Series 14x1 CCW

Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…

Downloads
3,895
Likes
427
Rating
4.86
P
PrintablesV3 Precision

Poop Chute Large Magnetic for Bambu Lab X1 Carbon

See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The…

Downloads
3,874
Likes
298
Rating
4.84
P
PrintablesAdam L

- PLA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…

Downloads
3,853
Likes
418
Rating
5
P
PrintablesSTomHacks

Bambu Lab - Magnetic Filament Poop Bin - X1, X1C, P1P and P1S

This is a remix of the poop bucket from @EnricoPulvirenti I basically added 3 holes to be able to add 3 magnets to avoid the bucket to move behind my printer. The magnets I used are these ones, 5x3mm :…

Downloads
3,800
Likes
328
Rating
4.83
P
PrintablesNairod

Fast Start GCode + Improved Quick Bed Leveling - End Retract Back to AMS for Bambu Lab X1 X1C & P1P

V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…

Downloads
3,705
Likes
236
Rating
4.67
P
PrintablesGabriele

Rectangle 100x50x10

Test rectangle 100x50x10 mm

Downloads
3,687
Likes
39
Rating
5
P
PrintablesDaniel

Bambu Labs Carbon X1 Top Glass Riser for LED's

Minimalist top glass riser. PETG. (Overture PETG Black). Nothing special. Just basically used stock settings on Bambu to print this!! :D No supports necessary. Supports 8 or 10mm LED strips that stick to the inner sides. Has a 4.25mm hole…

Downloads
3,686
Likes
590
Rating
4.84
P
PrintablesDiplomator

Filament Spool Rewinder Upgraded - Bambu Lab P1 / X1 / X1C / X1CC

Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…

Downloads
3,647
Likes
604
Rating
4.84
P
Printablesk2thestank

Bambu P1P and X1 Sliding Vent Glass Top Enclosure /w LED option

A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…

Downloads
3,630
Likes
843
Rating
4.57
P
PrintablesSVEN KRAUSE

Best Nozzle Wiper / Abstreifer Bambu P1/X1

Wichtig! Jegliche kommerzielle Nutzung meines Designs ohne mein Einverständnis ist untersagt!!! Der Abstreifer kann ab sofort bei der Firma Just Printing gekauft werden! Diese Abstreifer werden vakuumentgast und im…

Downloads
3,408
Likes
629
Rating
4.95
P
PrintablesRoiku

Baby Yoda ~ Bambu Lab X1

I colored the original STL on Bambu Studio and then printed it on the X1-Carbon. Printing time : 4h48 Support : ON - Wood filament: https://amzn.eu/d/cQzzvM3 - Green filament: Bambu Lab - Black Filament: https://amzn.eu/d/4SAliAa You can…

Downloads
3,278
Likes
393
Rating
5
P
PrintablesMediaMan3D

Adapter Rings for 250g Filament Spools for Bambu Lab X1-Carbon AMS (140-154mm diameter)

UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…

Downloads
3,275
Likes
475
Rating
4.63
P
PrintablesAdam L

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes

Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…

Downloads
3,267
Likes
733
Rating
4.92
P
Printableskunaa

M5 hex screw and nut (M5x10, M5x15, M5x20, M5x25)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
3,266
Likes
112
Rating
4
P
Printablesthrutheframe

Bento mini for Bambu Lab X1C P1P and Voron V0.2

UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…

Downloads
3,237
Likes
1,052
Rating
4.98
P
PrintablesRincewind76

Voron Stealthburner Printhead for Bambu X1C/X1 Hotend

This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…

Downloads
3,168
Likes
487
Rating
4.93
P
PrintablesBlazko

Poop Chute with removable Container | Bambu Lab P2S/P1S/P1P/X1C

Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…

Downloads
3,019
Likes
136
Rating
4.83
P
PrintablesNoWarrenty

Gridfinity Screw Measure Tool, 1x1 Mini Edition

There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…

Downloads
2,962
Likes
893
Rating
4.96
P
PrintablesAdam L

- PA/Nylon - Tuned X1C Print Profiles for Bambu/Orca-Slicer

What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…

Downloads
2,937
Likes
218
Rating
5
P

Bambulab X1 HotEnd / Nozzle & Extruder Holder

This is a holder for your HotEnds / Nozzle and spare Extruder, as well as some necessary screws/Mounts. The last of the top row holders is for a fully assembled Hotend/Nozzle with fan & silicone sock. Update 12/23/22: Added new version…

Downloads
2,916
Likes
238
Rating
5
P
PrintablesFlo Gamer

Auswurf Behälter für Bambu Lab X1C/P1P/P1S

Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S

Downloads
2,909
Likes
48
Rating
4.5
P
PrintablesHanz2508

9mm Luger, 9x19mm

9mm Luger, 9x19 Nato

Downloads
2,871
Likes
201
Rating
5
P
Printablesppamment

Bambu Lab X1 Carbon fast start + end gcode

Start + End Gcode for the X1 Carbon that significantly reduces the time to start printing without damaging your build plate, and making sure the nozzle is well primed to give a good first layer. The stock Gcode heats and cools the nozzle…

Downloads
2,817
Likes
121
Rating
4.78
P
Printableskjbturok

Bambu Lab X1 Y-Splitter with inlet for pneumatic connector G1/8" (M10).

Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…

Downloads
2,786
Likes
284
Rating
4.74
P
PrintablesJerrod H

LEGO Flower 1x1 (24866) for Giant LEGO Wreath

A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…

Downloads
2,785
Likes
1,225
Rating
5
P
PrintablesPJC 3D Printing

Bambu Labs X1-C eSUN PETG Profile

01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PETG with first layer height and temperatures to suit Wham Bam PEX. Also works just as well with textured plate. After loading the .3mf there is setting changes in all 3…

Downloads
2,770
Likes
185
Rating
5
P

10-inch Keystone Patchpanel x10 ports

A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…

Downloads
2,760
Likes
213
Rating
5
P
PrintablesCoat

Bambu Lab X1 Spacer for spoolholder

When you are using the original spoolholder of the BambuLab X1 and you have also the AMS installed, you are still not able to use wider spools. The SpringBuffer is in the way. With this simple 20mm spacer a wider spool is usable. It is…

Downloads
2,748
Likes
303
Rating
4.64
P
PrintablesJohn Barron II

Bambu Lab X1C Poop Chute

This model does require 2 10mm magnets to standup properly. I used 2mm thick magnets and they do sit flush now. If you opt to go no magnets then I'd recommend using tree supports with 0 interface layers. This is a quick and easy way to…

Downloads
2,707
Likes
180
Rating
4.92
P
PrintablesMatthew

Gridfinity Deep 1x1 Bin

This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…

Downloads
2,696
Likes
432
Rating
5
P
PrintablesSiganberg

Bambu X1 Re-Usable Spool

When I printed the “Bambu Lab Reusable Spool Holder Hex Remix”, I noticed that the printer is kinda bit violent on some sections and upon inspecting I noticed that the STL object doesn't have a proper arc. I also noticed that the print…

Downloads
2,693
Likes
341
Rating
4.27
P
PrintablesAdam L

Print Glass With Your Bambu X1/X1E/P1S/P1P Printer: Orca / Bambu Slicer + Overture Clear PETG formula

Do you want to print as clear as you can on your printer? This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C. I've tried several different parameters and come up with…

Downloads
2,656
Likes
296
Rating
5
P
PrintableseSeL

Bed level test, 135x135, Creality Ender 2 pro

Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…

Downloads
2,650
Likes
152
Rating
5
P
Printablessts210

100x70x100 Container with HSW Adapter

Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…

Downloads
2,599
Likes
525
Rating
4.96
P
PrintablesJack Siegel

BambuLab Cable Chain Clip P1P/X1C PFTE Guide - Updated

Update: Since some new printers from BambuLab have a modified cable chain, the originally designed clip did not fit anymore. There are two variants, please check which one you need, otherwise the clip will not fit. The difference is in…

Downloads
2,558
Likes
285
Rating
4.69
P
PrintablesTwotone74

Bambulabs X1C PTFE-Bracket - Extended Version

I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…

Downloads
2,492
Likes
295
Rating
4.34
P
Printablesmak77

MAK Ammo Box 9x19mm Para - 100pcs

Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…

Downloads
2,455
Likes
409
Rating
4.89
P
PrintablesMiguelitocaf

Cubo de calibración de 15x15x15

Cubo de calibración de 15x15x15mm

Downloads
2,408
Likes
10
Rating
4.67
P
PrintablesLemanito

Bambu Lab X1C chamber base insert

I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…

Downloads
2,315
Likes
509
Rating
4.93