Search results: x4

Sort order

4,032 models

P
PrintablesHector

Nasa chainmail (4x4, 8x8, 12x16 and 32x34)

Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
67,229
Likes
13,125
Rating
4.86
P
PrintablesGabriel

OLD VERSION! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…

Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant

Downloads
8,112
Likes
1,144
Rating
4.94
P
PrintablesKYZ Design

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
3,583
Likes
526
Rating
4.85
P
Printables3D Sets

Model 1: Rancher 4x4

Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
1,815
Likes
657
Rating
5
P
PrintablesGreymanx

AXP90-x47 Cooler Duct for FormD T1 3-Slot Mode (Noctua Swap)

I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
983
Likes
88
Rating
5
P
PrintablesIllia Shekera

Gridfinity Pen/Sharpie Stackable Tray 4x2x4

Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design

Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant

Downloads
839
Likes
104
Rating
4.89
P
PrintablesSchepperTs

Eurobox - 60x40x32

About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
494
Likes
18
Rating
5
P
PrintablesAKIINT

Maze 54x44 square cells, center start

I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…

Print approx. €6.63–€8.11 excl. taxPreliminary estimate for one variant

Downloads
401
Likes
127
Rating
5
P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
61
Rating
5
P
PrintablesSebastian88pla

Anschlag Block Kappsäge Alu Profil 45x45 4545 Säge Bosch

Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
50
Rating
0
P
PrintablesHeikit

Hook Haken 30x30 and 40x40 Bosch Aluminium Profile

It would be nice if you post your make. Thank you

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
275
Likes
34
Rating
0
P
PrintablesMario

Face shield v3.2 1h23m/shield 2x4-stacks modified settings

I had a lot of issues with the prusa original files&settings on my MK3s printers - perimeters did not stick, so lots of stringing on the inside for example. I modified my settings according to tips from Stefan of CNCKitchen and now print…

Print approx. €15.25–€18.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
257
Likes
0
Rating
1
P
PrintablesLukáš Foukal

Snowplow for 3dsets Landy 4x4 with height adjust

This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
240
Likes
47
Rating
5
P
PrintablesSknown

Snap on Hanging Hook for 40x40mm T-slot(10mm) Aluminum extrusion box frame

Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
31
Rating
5
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
53
Rating
0
P
PrintablesDusBus

Gridfinity - 5x4 - Holder for 18 pens

Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.

Print approx. €13.63–€16.65 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
30
Rating
0
P
Printablesgurnarok

45x45 aluminium profile table leg bracket

I designed this part, to fit some of my university's projects, where we made work tables out of 45x45 profiles from Minitec. The floor side is meant to spread the area of contact, creating a little bit of a stable base. These can also be…

Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant

Downloads
191
Likes
62
Rating
0
P
PrintablesNS

Lexus RX400h, RX400, RX330 Key adaptive holder (Fob, case) with logo

Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
6
Rating
0
P
Printablesgskollnau

Bonsai pot 12 oval flat 200x150x40mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
25
Rating
5

GK420d & GX420d Right Bearing (Roller clip)

Right bearing roller clip for GK420d & GX420d thermal printers. The original was too tight for me so I widened the hole a bit. Original can be found here: https://www.thingiverse.com/thing:3689058 If you're looking for the left clip, you…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
4
Rating
5

BakFlip Mx4 Corner Replacement

This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
152
Likes
12
Rating
0
P
PrintablesKeldor

Gridfinity 1x2x4.5 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
32
Rating
4

GK420d & GX420d Left Bearing (Roller clip)

Left bearing roller clip for GK420d & GX420d thermal printers. Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left. While the original listed here;…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
3
Rating
0
P
PrintablesJohan

Cup holder insert for Volvo (XC/EX40 C40/EC40)

Became tired of to be able to fit a normal 33cl sleek can or a 50cl PET bottle in the OEM holder without them flying away if I brake or do anything with the car, wanted to learn a bit of CAD and made these for a tighter fit then original…

Print approx. €5.24–€6.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
118
Likes
10
Rating
0
P
Printablesgskollnau

Bonsai pot 10 hexagonal rounded (mame)_120x120x46mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
21
Rating
5
P
PrintablesMuurph

IKEA Method Holepattern Orgenizer 70x45x35

It´s a little box to make unused space accessible. espacially for Pinhole Patterns of Ikea-Method kitchen funiture. Note: I increased the Vertical shell Perimeters to 5, to avoid infill in the Walls. To make everything look smooth, I…

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
39
Rating
4.75
P
Printablesmado30

Stand for Kyosho Mini-Z 4x4

This is a stand for Kyosho Mini-Z 4x4. Ein einfacher Ständer für Kyosho Mini-Z 4x4.

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
9
Rating
0
P
PrintablesAinon3Dtisk

Large playing cube 40x40x40

Hello, Today I have a large 40x40x40 game cube for you. Suitable for children to play board games. Quite big but it's really easy to play with, and it's perfectly shaped. I used PLA/PETG as the material. No need to use supports!!! If you…

Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
16
Rating
0
P
Printablesromankozak

Dukedoks Cramer Truggy RC 4x4 front top cover

I saw that the screw holes on the TPU Chasis Front Bridge on my Cramer Truggy were getting a beating, so I thought I'd make a cover that would protect the screws holes and look good at the same time, similar to the rear spoiler. PS: I…

Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
21
Rating
0
P
Printables3DP-MAMSIH

Wheel Base Rancher 4x4 Beadlock

Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets

Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
24
Rating
0
P
PrintablesAlvomane

Lego compatible 5x4 prison door | Lego kompatible 5x4 Gefängnistür

These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
21
Rating
5
P
PrintablesL7899

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
10
Rating
0
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
4
Rating
5
P
PrintablesDean Rumpel

Gridfinity 33mm Thread Spool Holder 3x4

Holds 12 spools of thread that are 33mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 33.5mm to easily hold…

Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
21
Rating
0
P
PrintablesSzachu

Gridfinity base for 40x40 aluminum extrusion horizontal

Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
35
Rating
0
P
PrintablesAlvomane

Lego compatible 5x4 grid cage door | Lego kompatible 5x4 Gitter-Käfigtür

These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
10
Rating
0
P
PrintablesMiscPrinter

Fired 5.56x45NATO Educational Model

Saw a reddit post about wanting a model with striations for their teacher. Grabbed a model from gradCAD, quick sketch, sweep and you have some striations. The punched primer is also tapered and at an angle but due to it's size, it is not…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
4
Rating
0
P
PrintablesBodo

3x4 units, full height, 2x1 grid Stackable Insertbox

This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…

Print approx. €6.37–€7.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
6
Rating
0
P
Printablest5montecarlo

Cord Wrap Brackets That Fit On 2x4 Lumber

I revised the cord wrap design to be smaller so the brackets would mount to a piece of 2×4 lumber. The holes are designed for #6×1.5-inch wood screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
10
Rating
0
P
PrintablesDrebinWorks

Storage box with lid - 90x90x45

Small and quite useful storage box for your household and workshop

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
9
Rating
0
P
Printablesgskollnau

Bonsai pot 07 rectangular (mame) 120x85x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Print approx. €6.41–€7.84 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
12
Rating
0
P
Printablesgskollnau

Bonsai pot 08 oval (mame) 120x85x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
12
Rating
0
P
PrintablesAlvomane

Toilet Doors/Gate 5x4 Lego compatible | WC-Türen/Tor 5x4 Lego kompatibel

These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
3
Rating
0
P
Printablesbjamdesign

Hydroponic - 3x4" downspout railing mount

Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…

Print approx. €8.35–€10.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
26
Rating
0
P
PrintablesKeldor

Gridfinity 2x4x6mm BarBin

Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…

Print approx. €4.20–€5.14 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
10
Rating
0
P
Printablesgskollnau

Bonsai pot 15 round curved flat (mame) 131x131x41mm

Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
5
Rating
0
P
PrintablesAlvomane

Doors/Gate 5x4 Lego compatible | Türen/Tor 5x4 Lego kompatibel

These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
9
Rating
0
P
PrintablesBerto3d

Keyboard Holder Profile 45x45

Two pieces. Without screw. Compatible with all keyboards

Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
5
Rating
0
P
PrintablesAlvomane

Lego compatible 5x4 door with hexagon grid | Lego kompatible 5x4 Tür mit Hexagongitter

These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
5
Rating
0
P
PrintablesDarth_Hawk

Gridfinity 5x4 ER32 collet holder - 28 pieces

I needed to save some space in my drawer and all of the holders here were 5x4 grid for 20 pieces, which takes even more space than my wooden ones that came with the collets. So I made this mess… holds 28 pieces in 5x4 grid. Put 2 next to…

Print approx. €7.93–€9.69 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
2
Rating
0
P
Printablesmacsddau

BOSCH PEX400AE to FESTOOL CT17 connector

Connect BOSCH PEX400AE to FESTOOL CT17 44mm vacuum hose. Self locking on sander.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
3
Rating
0
P
PrintablesFireffox

Yamaha DTX400K Drum Kit square screw hand wrench

Original tool was missing and hard to reach with my hardware. Hole i s 5.9mm wide to allow clearance with screw head. Model includes small through-hole for a nylon line to be used as hanger and a small loop on the top for thicker cords.…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
3
Rating
0
P
PrintablesThe Pro

M10x40 nut

very usefull

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
4
Rating
5
P
Printablesnukmau

CVLIFE 3-9x40AO Throw Lever

CVLIFE 3-9x40AO Throw Lever “Scope throw levers are an important component for shooters who need to quickly adjust the magnification of their optic.” - TRACT Optics This model is a throw lever I designed for the CVLIFE 3-9x40AO rifle…

Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
1
Rating
0
P
Printablessdk45

IKEA KOPPLA 6 ways EU socket support for 80x40 aluminium extrusion

I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
9
Rating
0
P
Printablesavolkov

Bosch 1617EVS 2x4 jig

This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm. The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d…

Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
8
Rating
0
P
PrintablesTobiVermeulen

edding pen holder for snap-on mounting on 40x40 ITEM profiles

To ensure that the Edding pen is always within reach, I have created a pen holder that holds Edding brand pens. The three versions of the holder differ only in their external labeling: edding 3300 edding 750 (without labeling) Of course,…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
PrintablesTi

Opticron BGA 8x42 Lens Cap

This is an eyepiece lens cap for an Opticron 8x42 BGA monocular. The rubber cap supplied with this monocular is very easy to knock off or misplace as it sticks out from the body of the monocular and has no retention mechanism; this print…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
1
Rating
0
P
Printableswiseby

40x40 Fan Regulator Mount

The mount-plate works with a variety of switch-regulators (many of the boards share the same pcb size and mount holes, not guaranteed though). The images displays a LM2596 with a Noctua 40x40 fan mounted inside a mainboard cover for a…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
4
Rating
0
P
PrintablesC F

Card Inserts for Closet Storage (50mmx100mm or 2"x4")

Simple organizer insert with dimensions of 50mmx100mm or 2"x4". I downloaded EB Garamond which looks particularly nice in bi-color. I added a layer change about half-way up (see attached GCode) and put some of the common organizer labels…

Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesC3DPR

40x40 Fan filter accessory with cable outlet

Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
0
Rating
0
P
Printablesthomers

Dyson Flat Nozzle 100x4mm (v7 and later)

Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…

Downloads
3,720
Likes
1,003
Rating
4.97
P
PrintablesCrosslink

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Downloads
3,173
Likes
843
Rating
4.67
P
Printableskristianmedk

Makita Router Circle Jig (RT0700CX4)

24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware

Downloads
2,931
Likes
526
Rating
4.94

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

Downloads
2,884
Likes
343
Rating
4.91
P
PrintablesCL Performance

Flow Calibration Cube 40x40x30 mm - Drucker Kalibrierung

English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…

Downloads
2,610
Likes
43
Rating
4.8
P
PrintablesEIGA

Duct Peg for AXP-90 x47 + Noctua NA-FD1

Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…

Downloads
2,588
Likes
84
Rating
5
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Chassis)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…

Downloads
2,514
Likes
512
Rating
3
P
PrintablesClemi

12x usb cable organizer tray - gridfinity 3x4

This is a 3x4 gridfinity usb cable organzier for 12 x cables . The diameter per cable is approx. 12mm. Have fun and don't forget to post your makes :-) Check out my other designs and follow me for more.

Downloads
2,357
Likes
286
Rating
5
P
PrintablesKaminoKGY

Artillery Sidewinder X4 Pro & X4 Plus PrusaSlicer profiles

Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…

Downloads
2,091
Likes
43
Rating
5
P
PrintablesLittleJoeMuc

Gridfinity Ram Storage (Desktop - 1x4, 2x4, 3x4)

Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…

Downloads
1,860
Likes
209
Rating
5
P
PrintablesAkio

Gridfinity 5x4 rugged case

I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. The box holds 6U high bins…

Downloads
1,806
Likes
551
Rating
4.78
P
PrintablesJuliCai

2x4 lego brick

a 2x4 lego brick made from the original 2x6high.

Downloads
1,660
Likes
39
Rating
4
P
PrintablesSkovik

Wall plug - dowel - 10x45 - hmozdinka

EN: Wall plug, dowel, size 10x45 mm. CZ: Hmoždinka - velikost 10x45 mm Print instructions === EN ======= If you want different size, increase or decrease % print size as you want. PETG is appropriate material. See my other designs! === CZ…

Downloads
1,603
Likes
186
Rating
5
P
PrintablesAlex Krush

Raspberry Pi 4 Mount for 80x40 Extrusion (Ender 3 V2)

Designed for Ender3v2 to mount behind the LCD screen. I would imagine this works with other Ender 3s but I cannot confirm You'll want to use supports for the rails If you're looking for a mount to go in middle to replace the drawer, see…

Downloads
1,602
Likes
167
Rating
4.45
P
Printablesis-serp

.223 Remington / 5.56x45mm NATO

The .223 Remington is a rifle cartridge developed in 1957 as a hunting bullet. A military version, the M193, was used by the United States Army in the M16 rifle. The 5.56x45mm NATO was also developed from the .223 Remington. Category:…

Downloads
1,599
Likes
94
Rating
5
P
PrintablesGabriel

NEW Version V2! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. New V2 version included some fixes that stiffens overhang test, makes it easier to read the overhang angle and some more. Calibration Cube All-in-One Included: Letters to identify axis Calibration…

Downloads
1,583
Likes
98
Rating
5

Traxxas TRX4 Chain Drive, Track Drive, All-Terrain Traxx

I have developed a chain drive for Traxxas TRX4 RC cars, which can be almost completely 3D printed. All you need are a few ball bearings and M3 screws. The drive train is fully functional and has already been tested extensively (in snow…

Downloads
1,519
Likes
594
Rating
5
P
PrintablesRedKnight358

'T' Clamp for Drilling 2x4 Wood

This clamp is designed to hold two 2x4 wooden planks together at a 90 degree angle so that holes can be drilled to secure both boards together. Worked well for my purposes. Do note that you will need more walls while printing in order to…

Downloads
1,498
Likes
673
Rating
5
P
PrintablesIdea Prints

Lego Duplo Brick 2x4 #3011

🧱Lego Duplo Brick 2x4 #3011🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…

Downloads
1,481
Likes
113
Rating
4.88
P
PrintablesJoza

Defender 1/18 Recovery boards for Traxxas TRX-4M (TRX4M)

1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…

Downloads
1,476
Likes
135
Rating
4.5
P
PrintablesClessi

20x4 LCD Case | Arduino

Hi everyone, this is a case for a 20x4 lcd. It has an I2C on its back. As you can see the cables for the I2C going out on the left side. It has holes on its back to mount it where ever you want. Bring front and back together with screws.…

Downloads
1,468
Likes
86
Rating
4.67
P
PrintablesBaGooN

Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter

I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…

Downloads
1,390
Likes
92
Rating
5
P
PrintablesGedoens

Gridfinity Pen Holder 2x4 4U

I remixed @dissendat_154107 model of a gridfinity pen holder for 4 pens for a more compatible stackable version for my fountain pens. Original measures 2x4 3U high. I adjustet heigth to 4U Can hold up to 4 pens. Now for bigger fountain…

Downloads
1,348
Likes
153
Rating
4.85
P
PrintablesSmoTech 3D

Artillery Sidewinder X4 Pro Orca Profile

BEFORE IMPORT CONFIGS YOU NEED TO HAVE KLIPER 0.4 PRINTER ON ORCA , IF YOU DONT HAVE THIS AN ERROR WILL POP UP THAT SAY 0 CONFIG IMPORT (SEE PHOTO) I have used this profile for big and small prints so its safe and tested you can see the…

Downloads
1,284
Likes
35
Rating
5
P
PrintablesRuxi

Gridfinity baseplate [2x4] with Skadis Universal Hook mounts for IKEA pegboard

Tired of gloopy overhangs? Need to mount gridfinity organizers on an IKEA skadis pegboard? Welp, here it is! Remixed @glitchprinter's 2x4 baseplate with four ikea skadis universal mounts. --- Parts used in this remix Magnetic Frame - 2x4…

Downloads
1,206
Likes
254
Rating
4.93
P
PrintablesMrStolarsky

Offroad 4x4 Recovery Boards

🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…

Downloads
1,197
Likes
120
Rating
5
P
PrintablesSMACKMAX_

Garbage Bin - 24x24x45(x) cm

Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…

Downloads
1,192
Likes
481
Rating
5
P
Printables8bitmcu

1:16 Truck/Crawler 4x4 RC Chassis

This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…

Downloads
1,183
Likes
358
Rating
5
P
PrintablesMartin

Hyundai Tucson NX4 2021

This model is a remix of: https://www.thingiverse.com/thing:5251321 Scale about 1/10. I did following changes: I fixed the model so it's 3D printable Attempted to turn the model into european version: removed trunk lid handle added dual…

Downloads
1,150
Likes
102
Rating
5
P
PrintablesReset

sliding puzzle 4x4 print in place

Summary sliding puzzle 4x4 print in place there are 3 versions: with 0.15, 0.2 and 0.3mm gap. to make it easier to move the stones, i recommend applying 1 drop of silicone grease to a cotton swab and carefully wetting the sliding points…

Downloads
1,128
Likes
170
Rating
4.8
P
PrintablesSlanjonok

Jet another Vallejo/Citadel-Paint holder, standalone version 4x4

This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…

Downloads
1,098
Likes
151
Rating
5
P
PrintablesINVESTEGATE

Creality SpacePi Space Pi X4 X4L Filament Spool Guide Fix - cliped

A simple but suitable filament spool guide for the Space Pi X4 and X4L filament dryer from Creality. This prevents the spool from jamming when it's almost used up. Because the spool is too light, it can cause the spool to skew. This can…

Downloads
1,086
Likes
174
Rating
5
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Body)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. Join our : Discord The Chassis for this model can be downloaded here:…

Downloads
1,057
Likes
168
Rating
0
P
Printablestheflow.fr

Gridfinity bin 2x4

Here's a basic 2x4 gridfinity bin.

Downloads
1,026
Likes
47
Rating
5
P
PrintablesEx-Pigeons

Jeep Wrangler Body For Trx4m

here is my jeep wrangler body for a trx4m. i print the main body and glue the details on how ever you want. it comes with the bumpers it needs to be put on a trx4m. it wont work on the normal bumpers. be sure to support the main body well…

Downloads
1,025
Likes
135
Rating
0
P
PrintablesEd

TRX4M Modular track part 1

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Downloads
1,018
Likes
117
Rating
4.89
P
Printablesradzaga

Rituals Car parfume Vent Clip - Hyundai Tucson (NX4)

Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.

Downloads
1,001
Likes
54
Rating
5
P
PrintablesEx-Pigeons

TRX4M trailer

Trailer inspired by some on amazon.

Downloads
1,000
Likes
109
Rating
5
P
Printables29flo

4x4 Off Road Car Model

4x4 Off Road Car Model This time, I'm presenting a 4x4 car model. In my opinion, the best way to print it is in a vertical position. But maybe someone has a different idea. Removing the supports takes a bit of effort, but I think it's…

Downloads
988
Likes
138
Rating
0