Small Whistle: extremely loud
Small whistle for keychain, backpacks and other daily or safety equipment.
- Downloads
- 15,523
- Likes
- 2,803
- Rating
- 4.91
13,456 models
Small whistle for keychain, backpacks and other daily or safety equipment.
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Extruded fractal flake prototype. A predecessor to the fractal flake vase I made some years ago. The basic shape and parametric model is almost the same: A variation of the Koch-curve with hexagons, which changes in rotation and…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Introduction Minimalistic solder fume extractor with 120mm fan and two active coal filters. Easily prints in three separate parts and slides together into a space efficient and sturdy package. The bottom is fastened with two countersunk…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
EXTREMLY LOUD WHISTLE Should you encounter issues with filament strings, this whistle may prove ineffective, as it involves numerous retractions. I suggest verifying your slicer configurations. You might consider reducing the printing…
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…
T-slot covers provide protection from debris buildup and can also be used to manage wires and cables recessed within the T-slot. They can also add a finishing look to your project. So... Since I couldn't really find what I wanted I made…
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…
This is version 2 (V2) of the Delta-P fan duct for BEAR. It has several updates compared to the original: Easier to print Better cooling Refined flow path CFD optimized Even cooling front to back and left to right Improved visibility of…
Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…
Watch the motion of your 3D printer's extruder, Star Wars style. Embed a 6mm X 2mm tall magnet while printing, multi-colored as well with a single extruder (swap mid-print). Print instructions I used .1mm layers, since I wanted this to be…
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
A cover for the grooves in 2020 aluminum extrusion that simply snaps into place. Used to cover wires or simply to give a little color to 2020 aluminum extrusion. To change the length of the of this cover in PrusaSlicer (see PrusaSlicer…
Created for Prusa MINI with mini base to clip X-Axis cable out of the way of the filament tube.
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
This is designed to snap-on a 2040 extrutions, like used in the Bear Upgrade for the Prusa Printers
Author: Prusa Research (Dominik Sauer)
This TNUT is created for anyone that forgot the m3 screws on a 1515 extrusion print at 105% flowrate for nice adhesion in the tnut
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Tired of the smelly solder fumes floating around? This is the answer. A solder fume extractor with a powerful 140 mm fan. This solder fume extractor is designed to carry a big 140x140x25 mm fan. I used the powerful Noctua NF-A14 with 3000…
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…
Do you need a way to easily get perfume out of its original bottle? Than this simple print is for you. It's a simple adaptor for a perfume bottle that uses the vacuum created by a syringe to extract perfume. I have a nice travel bottle…
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
An extra large Snoopy keychain for all who love Snoopy (10cm), But if you want, you can make it smaller with the attached FreeCAD file. Or directly in the Prusa Slicer. In any case, you still have to set the color change manually.
Endcap for 30x60 mm aluminum extrusion.
Simple holder for 1TB SSDs using the Gridfinity system by Zack Freedman . Fits up to 3 SanDisk Extreme SSDs for all your storage needs. Leave any suggestions below. Thanks!
Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…
This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…
Remix of MayrM's knob but scaled down to dia 33 mm. The original seemed too clumsy. The part attaching to a stepper's shaft is scaled to 101%. Fits to stock extruder on Anycubic Kobra Go, should be compatible with Ender 3 and other…
Tile for 3D printed game, Hextraction. Remixed from Zach Freedman's model, which has the unintended consequence of the center star acting like a ramp instead of allowing the model to trap the balls. In my remix, I changed the star from an…
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
noozle temperature(first layer) :220 noozle temperature: 205 bed temperature: 60 supports : none rafts : none
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…
Tiny Back Scratcher Hand – Extra Long Finger Extension Product Description: Introducing the Tiny Back Scratcher Hand, a clever and practical tool designed to help you reach those hard-to-scratch spots with ease. This tiny hand slips onto…
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. Although I'm aware that there are several solutions for this purpose, I have chosen another option that will fit into the…
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
This clamp is made to fit the 30x30 mm extrusion profile of the MINI and the MK3. With this system you can mount an object of 2 mm thickness (other dimensions linked below) to your printer or wherever such an extrusion is used. It is a…
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
Extruder visualizer Prusa mendel i2 style. No glue, No support\ It needs 3 magnets (8x3mm) to work.
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
I just wanted a knob that I had a hand in designing. This is a heavily remix of the original design from on onshape here model by “c”. Printing Layer Height = .20mm Primeters = 3 is pretty good Infill = 15% Orientation = print the top on…
Allegedly, it should sometimes happen that the extruder of the Original Prusa Mini causes problems. It is therefore an advantage if you can observe the movement.
This remix of Zack Freedman’s Hextraction Secret Tiles introduces an alternative lid design. Instead of a flat question mark, this design is inspired by the Question Blocks found in the popular Nintendo Super Mario games. Learn more about…
I've printed finke stand but it appears it was to small for my 15,6" laptop so I designed an extra leg so the laptop is not tilting backwards. The leg is pressed into the triangle hole of the leg. It is a nice tight connection but it is…
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
This is a cable mount for I-type 4040 extrusions (8mm slot width) which requires no fastener. Instead, it is inserted into the slot at a 45° angle and then rotated into either horizontal or vertical orientation, where it stays in place on…
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Size: 70mm x 49mm x 38mm Filaments: PLA Galaxy Black (black) and PLA Vanila White (white) Note: Parts need to be glued.
Remove the insert provided with the Mosaic Palette 3 pro and insert it into your print. V2 of the clip has a filament guide and a slightly bigger hole for the filament to enter the extruder, I also added an inspedtion opening for the…
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Needed a box for my quick change Nextruder Hotend Assemblies. Holds 3 completed assemblies, and 16 assorted print heads. I enlarged the box, but also shortened its height. Be careful the first time you try to close the case or you might…
Tired of your balls rolling everywhere? Here you go! Designed to keep your 3 tiles together, while keeping your balls in place. All that's needed is a Hextraction Set and 10mm balls (which I'd assume you already have), around 25g of…
Box for 2 SandDisk Extreme SSD and accessorise (usb cord and USB 3 adapter). I added a space also for a microSD to SD adapter. My disks are 500GB and 1TB so one part is a little bit smaller. Remix Is permitted to feed any needs. Do you…
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…
Here's a completely 3D-printed welding smoke extractor, complete with computer fan and activated carbon filter. It's important to protect your health when soldering. This DIY welding fume extractor will help you do just that with its…
Laser Bracket for sprite extruder. Made for Creality laser engraver
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…
EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy
A 90 degree connector for an extraction fan to allow me to better vent out nasty resin, airbrush, or solder fumes. you might need to use an elastic band to “seal” the elbow onto the extraction fan. See gcode for an example of the…
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
This is cover for Original Prusa MK3S+, to mimic the design of the Extruder cover for the Original Prusa MK4 and XL.
This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…