Counting matching models…
This little tool helps you press LM10UU linear bearings into the aluminum housing on your 🥰 Prusa Core One's Y-axis assembly. It makes sure the bearings are fitted centered in the CNC machined housing. As you need to heat up the aluminum…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Nozzles to pack 8 and 10mm linear bearings plus caps
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…
does not fit the DW-5600 and similar as the buttons on the module are much closer together.
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
Please try the original authors version before trying the altered version. I had a little trouble with the original 10mm diameter being a little too big, so I used some of the new features in PrusaSlicer 2.6.0 to change it up a little.…
Blocchi cuscinetti lineari SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU. Le misure dei modelli SCS_UU sono quelle più di uso comune, e si rferiscono alle misure dei modelli riportati in verde nel file SCS_UU_datasheet.pdf Le…
Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…
I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so…
Sony TV remove holder. Grey holder in photos is for the RMF-TX310U. Black holder on the right is for the RMF-TX500U. There are similar versions of these remotes with different numbers that may be compatible with one of these holders.
Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…
Adapter for the lubricate tube, you recive with your prusa for LM10UU insted of the LM8UU
ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…
Als Ersatz für die schlechten Lagergehäuse und der Lager für eine billige CNC2418 damit nichts mehr hakt. Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Grey Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts:…
In the process of upgrading the Y axis of my Anet A8 Plus from 8mm rods and bearings to 10mm rods and bearings, I needed carriers that mounted identically to the LM8 carriers, but would fit LM10 bearings. This is somewhat of a “quick and…
This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill. Instructions from original post: Print Settings Layer height 0.2mm Sturdier settings, e.g. 1.2mm walls and…
LM10UU bearing housing It was designed to be backwards compatible with SCS8UU. Use M4 screw nuts(there should be a tight fit). The bearing can be connected to the housing using an zip-tie. I suggest using 0.08/0.10 layer height, should…
This thing is the HyperCube stock X carriage modified to accept either the LM10UU linear bearings or the Igus RJ4JP-01-10 10mm bearings. These bearings both have a dimension of 19 mm x 29 mm. This modified carriage will accept one bearing…
The design is based on Prusa Bear Y axis bearing mounts. Its use case does not limit to Prusa Bear machine and even Y axis.
Printed from PLA at .15 and worked as expected. There is a sacrificial layer you must pinch with a screwdriver - therefore no supports needed.
I wanted to reuse the original LM10UU bearings from the MK4S on the Core One and designed this bearing mount. The outer dimensions are identical to the mounted bearings that came on the Core One with the exception of the clamping tab. The…
This case is designed to be used with a Jaspers synth stand, as such it is angled at 30º so that it can sit vertically when mounted. There are holes in each 3U row for a Topobrillo Eurobus power supply, and 3 different style of covers for…
2x 1.8mm x 24mm spring bars required The adapter in the photo was printed on a PBF-LB-P printer(Fuse1) If you want to print it on a MEX printer, support structures are required. Add support in hidden areas.
I was looking for a small drawer for my familiy for floss and toothpicks, so they can't get mixed up - eww. Haven't found anything that fit my needs, so I created a print-in-place solution for that. Size, as in the title: 2x2x10u Magnets:…
This is replacement to aluminum bearing block. I used these on heated bed movement, with printed blocks you can reduce 160 grams of moving mass. Bolt grid matches on Reprap Trespa carriage plate sod here:…
There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…
Connects with the original Ultimate Drawer System , not the XL or V2 system. Basically just widened the frame to double width and created some new drawers. Works well to store larger things. The drawers are still held on by the original…
Gridfinity Vase Mode 10U Bin with stronger edges. 79mm Tall
Hello, I needed SC10UU with SC8UU holes dimensions, so I created one. You have 3 versions. My original and then lighter and smaller types. Also I created SC10UU with original dimensions. It is also available in 3 versions.
I remixed the original Z axis carriage to add longer arms and an additional set of holes. I also opened up the bearing location by 0.1 mm. Clamps and Bearing Rod Supports are the same as the original design but presented here for…
Designed this throttle control for my Echo SRM-210 after mine broke. Print Settings Printer: Ender 6 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Sakata PLA 850 Orange How I Designed This =================== Found two…
Remake a long 110uh coil using 0.5mm Enameled copper wire. Original is for using 0.3 mm
Customized version of http://www.thingiverse.com/thing:120441 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=120441 Instructions Using the following options: outer_diameter = 12.3 split_bearing = No…
I needed it to build a Frankenstein bedslinger out of my printer graveyard's parts… well, it works well!
i make this for my 3d printer project. this models require T8 Lead Screw Nut and i use SCS10UU for holding the heatbed. You can use V/T slot for your heatbed. Maybe later i will redesign it and make the better version. Enjoy ( /ω＼ )
A minimalist, low-profile custom bezel designed for the square Casio G-Shock GW-M5610U & GW-5600 series. Designed for those who want a cleaner, slimmed-down look without unnecessary bulk. Tested on: Casio GW-M5610U Casio GW-5600 Expected…
Soft mount with zip ties for a LM10UU brace below a heated bed
I quit riding motorcycle and had a left over Sena 10U for listening to music and intercom system. The design is for connecting to the back of a Ski helmet to have for the ski season. 3D PRINTING SETTINGS 20% infill works just fine
E6 (also E3) 10pf ~ 10uf capacitor labels for Harbor Freight 40 bin organizer (2 values per bin) NOTE: Due to the small font required, cleanup of the print may be required. Try to use dry filament is possible. There seem to be 2 versions…
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed…
This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO
I received an old Asus laptop that broke at the hinges as the piece sheared off but the wiring was still connected. It was a perfectly functioning laptop but the hinge just couldn't move without risk of further damage. I constructed a…
I needed to store some bearings I had lying around, so I designed this to hold exactly 10 units. This container has a snap-fit lid with an additional lip to keep dust or debris out—whether you're storing metal skate bearings or 3D-printed…
This remix is based on GrafXP s excellent Modular Rack System for Gridfinity Drawers (thanks for sharing also the .step files!). If you want to know more about the rack system, please visit the original author's page! The remix will…
This 10u shelf aims to minimize the amount of filament used for a shelf while reducing warping risk and keeping enough strength. Designed to be printed in very cheap Esun ASA+, this model uses a hollow internal geometry with custom infill…
I received an old Asus laptop that broke at the hinges as the piece sheared off but the wiring was still connected. It was a perfectly functioning laptop but the hinge just couldn't move without risk of further damage. I constructed a…
Needed a way to mount a Z-wave remote to a wall, used 3m strips. Category: DIY
I thought that it should be pretty easy to design spiral-mode gravitrax spacer, but yet I couldn't find any - so I designed one. It prints fast and uses as little filament as possible. So if You have 8 grams of filament and 15-20 minutes…
This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO This version has replace all the…
![[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx](https://media.printables.com/media/prints/540338/images/4351600_41e9d409-f21a-4e93-8e71-dd39016b6e93/dsc_0482.jpg)
