Counting matching models…
I liked the idea of this design …but I wanted one with wider and more more slots and would not require supports to print. So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have…
This model is compatible with the lego system.
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
Plugs the arbor hole that spews dust everywhere. This is a loose fit meant for easy install and removal: 1. Insert the tab on the left. 2. Line up the tabs on the top and bottom. 3. Mallet time! (on the right) Print in PETG so it'll be…
print thread side up 100% infill 0.2 mm layer height
Wall mount for LEGO Technic 42127 BATMAN batmobile. Wide area for double-sided tape and solid hold for front wheels. I used Pattex Fix 120kg red tape to stick it on. Update: Stronger sides for not bending Need a supports under the logo,…
TL;DR Just a CAD exercise found on reddit and made it with freecad. reddit https://www.reddit.com/r/SolidWorks/comments/10m2ugj/how_can_i_become_faster_drawing_things_like_this/?sort=new exercise Use only the screenshot and try to sketch…
The LZ 127 Graf Zeppelin was a marvel of engineering and a symbol of the golden age of airships. Built in Germany in the 1920s, it was one of the largest airships ever constructed, measuring over 236 meters in length. Named after Count…
An 127 mm shell for a naval gun. Not 100% accurate but close ;)
This is a Bahtinov mask ( Wikipedia ) for Celestron NexStar 127SLT which makes it easier to focus the telescope for the clearest image. This is especially important for astrophotography. The face of this mask was created with this online…
This body allows you to combine an Ektar 127mm f/4.7 lens with Mamiya Press 2x3, 6x7, 6x9, or Multi-format film backs. Required: https://www.prusaprinters.org/prints/53784-copal-compur-prontor-0-to-m58-lens-board-adapter M58-M58 17-31mm…
Simply photo frame / stand 5x7 13x18 127x178 Easy to print, can be used on landscape or prtrait orientation Printed with 0.6 nozzle, 0.4 layer and PLA
A minimalist door hanger for a bathroom , designed in the iconic single-line style known from the 1970s cartoon “La Linea.” The simple, playful silhouette and clear shower symbol make it perfect for homes, hotels, gyms, or wellness areas.…
This is the Fortress set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
ARTE&DISIGN GT127 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
All the pictures of the printed parts are of an older verion. The files have been slightly. Biggest differences to the pictures are in the upper part of the frontgrip (nicer transition from grip to body) and an additional tool compartment…
Modification to anchor the bracket with screws to the wall
Due to the required overhang it is recommended to use PLA or a fiber infused material you prefer. I have used Proto-pasta matte fiber and Kimya ABS Kevlar. I don recommend using carbon infused material due to the amount of touching of the…
Remixed to fit wider slats that are a reference width of 127mm or 5 inches.
Mix of two focusers from calli and jslafas with my edits to make it suitable for nema 14 and basically no disassembly required except removing VisualBack and screwing it back with spacer and base UPDATE I have added baseplate for nema 17…
Used to mount Motec C127 dash onto the car's interior
This is a simple 14mm CCW thread adapter for the Cyma CM.127 AEP. The CM.127 has a glued piece of plastic at the end of the barrel where a 14mm CCW thread “should've” been. As such, I modeled this thread adapter with an extra cover piece…
This model is compatible with the lego system.
The Tri-Bahtinov mask was designed using this excellent tool: https://skeye.rocks/tools/mask/ The mask and dew shield are designed to be a snug pressure fit onto the lens cap flange by adding a couple strips of adhesive velvet as sold for…
Rubber feet for Macbook Pro A1278, may also fit other models. Check dimensions before printing. Designed to be glued to the bottom cover. My settings for Renkforce RF100: 0.1 mm layer height Raft Printed 4 at once to avoid warping and…
Weight plates for blinds sometimes become brittle and break when removed from the connecting chain. Several popular repair solutions ( https://www.printables.com/model/147266-89-mm-lysel-slatted-curtainvertical-blinds-weight ) suggest…
Bring a timeless aesthetic to your desk or wall with this beautifully ornate Victorian-style picture frame , featuring intricate scrollwork and a 127mm x 127mm (5"x5") square footprint with a circular photo window. Designed for…
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
All the versions I found of this had some of the features that I wanted, but none of them had all the features. When wall-mounted, the trays swing 120degrees wall to wall allowing full access to the papers inside. There is a finger hole…
Republishing a part that saved me some $$$ for my dyson repair. This design have been in my dyson since a year now and still working like new to this date. Thanks to Sulya for designing this one. *** Dyson Mini Turbo 967479-01 96747901…
The reel must be un-clicked from both 120 and 135 settings and free floating. The clip will hold the reel spacing at 46mm to accept 1 roll of 127 film which will need to be pushed into the reel by hand. Clip on as per photo.
I made this tray because I did not have space where to store my PCB's before and after assembly. You can store PCB in panel or single PCB and you can stack them if you need. Is easy to print, without supports. Print instructions Printer…
This is an upgraded version of my previous 100mm design, now 127mm in diameter. It still has several features that makes it better than regular PU ones: It has full tire groove for better grip , being 95% air inside helps in amortization…
Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…
The “Cyma_CM127_Magazine_Holder” can be screwed to anything with M3 threads and 10mm spacing. For example to the included “Cyma_CM127_Magazine_Holder_Belt_Clip” or my “ Cyma CM 127 Carbine Conversion/ Rony ”. The magazines will be…
This is my teams own custom Odometry that I designed to fit our robot perfectly, so I included the step file so you can edit it to fit your robot should you wish to do so. I 3d printed these but if y'all want to laser cut it that's also…
Einfaches Modell, aufrecht ohne Stützen zu drucken. Links Halter für Eurostecker, rechts Halterung für Ladestecker, vorne für Kabel. PLA ist normalerweise ausreichend. Simple model to print upright without supports. Left holder for Euro…
Printed with a 1mm nozzle in Polymaker PolyTerra. Inside diameter is 167mm, feel free to resize to fit your needs
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Designed and tested to fit the common Type K…
CZ: Náhradní díl nahrazující špatně dostupný díl Lego Jeřábový hák levý (3127) Model je optimalizovaný pro 3D tisk: Hook V1 - více podobný originálu Hook V2 - jednodušeji tisknutelný EN: Spare part replacing the hard-to-find Lego part…
This is my solution to motorize R.A. axis on stock telescope EQ mount. No irrevisible modifications of the mount needed. Just print and snap it on. Accurate enough for visual, nothing more, nothing less. It includes: NEMA17 90 degree…
ABS/ASA/PETG/PLA Infill 15-100% Brim No Support Yes
A film holder for scanning 127 format roll-film (46mm wide) on an Epson V800-V850-V700-V750 scanner. It holds the film flat at 3mm above the glass. Tight fitting clips hold the film flat for accurate scanning. It's sized to just fit on…
The original model had to be cut into pieces and arranged, this remix fixes that
The Outside cover is available in 2 Versions. Solid Model if your printer is big enough, or split in two pieces. Also added the .step for you to customize . To connect this to your tent you need some velcro band, i used this one:…
compatible parts for metal screw kit merkur M3.5 screws
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C. photo is of 80/63 translation gear as I don't think this 127/100 would fit my present set up…
I made this after I got mad after my flashcards went every where this design is for flashcards 127mmX76mm it holds 200
The Modular Hydroponics Tower by Thingiverse (5712775) is a great model, but I was bothered by the fact that I couldn't properly clean the filter, which is unfortunately permanently integrated into the model. That's why I designed this…
The mounting holes are for 4 mm countersunk screws. The distance between the holes is 127.5 mm and the clearance for your hand is 23 mm (which fits my large hands good).
Customized version of http://www.thingiverse.com/thing:160391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=160391 Instructions Using the following options: gap = 6 aperture = 203 outerDiameter = 215…
Pinsir Pokemon #0127 with arms tucked to print successfuly
This a supplemental to my mini P-10 model. This is exactly the same as my mini P-10 except the intake, rotor and chopper. See the P-10 project for more info and files. One important change is motor voltage. For this project and the 8 port…
This model is compatible with the lego system.
This is a replacement table insert for a Grizzly G0817 Bandsaw. Oftentimes something will catch and break these things. It's a pretty simple and quick part to print and replace. My personal suggestion is to print with about 50% infill and…
This is simple little adapter for the back of the Mak to turn it from unusual M44.5 to more standard M48. Made it to be able to put my Astro Physics CCDT67 as close as possible to the hole. I printed it without supports, did get a bit of…
The system is based on a double helical focuser like this: High Precision 1.25" Double Helical Focuser with Brass Compression Ring M42 T2 SCT Thread 2" Adapter for Astronomical Telescope…
Doppel-Zahnrad mit 100-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind auch die Steigungen 4, 5,…
Created for the Mitutoyo 129-127 depth micrometer. 3x5 gridfinity grid. Small storage compartment with lid for micrometer wrenches and small hex key that accompanies the depth micrometer.
The funnel fits on the IKEA muscovado lid and 5-gallon lid of the Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. Printing: Material: PETG (certainly also printable with PLA but…
Сам печатал пластиком ABS 0,4 соплом с разглаживанием на всех верхних поверхностях, чуть подгонял по посадочному месту. Делал под оптоволокно 1.5мм, запаситесь сверлом по металлу на 1.5мм и тогда зайдет на ура. Я доп. посадил на космофен…
This is a much more robust finder scope holder than that one that comes with the telescope. Can adjust rear and front and it doesn't shake like the original. Openings for knurled screws are 2mm. you might need to adjust. There is a…
This is a film holder for 127 film for use in the Plustek OpticFilm 120 series of film scanners. It is pre-split so it can be printed on a reasonable size printer. The two halves snap together and should be glued or taped together. I…
Rear dual-hose adapter for the air conditioner, for an additional hose to draw intake air from outside. It is best to attach it with double-sided foam tape, but you can also use regular double-sided tape or nano tape. Print SAMPLE PIECE…
This model was based on the “fan base for Amd Radeon Instinct MI8 (rage fury X) GPU” by @Hrumque. I made 5 iterations of improvements, and this is my final version. It has been customized to exactly fit a “CF1275-B30H-C002” fan found on…
Tough PLA works best. Regular PLA can be brittle. Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail on all of the parts. The inset adapter goes behind the refill. It may be trimmed or shimmed…
Ersatzhalter für Lamellenhalter 127mm Drucker / Einstellungen: Bambu Lab A1 50% Geschwindigkeit Nozzle 0.4 Sunlu PETG Weiß
I thought the R-Class was a big model, but I decided to go even bigger. The Graf Zeppelin is very unique airship, and in my opinion the best-looking one every built. I could have scaled it down, but I wanted it to be at the same scale as…
127mm vulcano-ER shell naval gun, not 100% accurate but close.
Doppel-Zahnrad / Wechselzahnrad mit 124-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit dem 124-127 Doppelzahnrad anstelle des originalen 120-127 und dem…
I lost a couple of the engine appearance cover caps on my daughter's car. And you don't need them but I designed and 3d printed them and they look pretty decent. Print with no supports and something that can handle the engine temps. PETG…
Doppel-Zahnrad mit 102-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind auch die Steigungen 17 und…
Doppel-Zahnrad / Wechselzahnrad mit 110-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
Ersatz Zahnrad für das originale Doppelzahnrad mit 120-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Dieses Doppelzahnrad wird benötigt um an der Maschine zöllige Gewinde schneiden zu können.…
All the pictures of the printed parts are of an older verion. ---------------------------------------------------------------------------------------------------------------- Parts List: - 1pc M3x8 zylinder head screw - 1pc M3 thread…
Doppel-Zahnrad / Wechselzahnrad mit 105-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
Doppel-Zahnrad / Wechselzahnrad mit 112-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
Questo porta manometri per manometri da 52mm si va ad implementare al posto dell'autoradio per i cruscotti della fiat 127 seconda e terza serie. Inoltre per fissare la flangia non vi è bisogno di alcuna vite o colla ma si fissa ad…
If you have a Fox Transfer dropper post from the years 2018 to 2020 and you want to service it, you need a 500€ tool (803-01-127) to open the post. If you print my tool with a 3D printer and then use a plastic tube, you can also knock it…
After not being able to find the part online, I eventually bit the bullet and tried to recreate it. The clips fit perfectly into the original, this can be mirrored to work on either side. Yes the top of the clip doesnt look great, some…
Doppel-Zahnrad / Wechselzahnrad mit 117-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 und dem 64er…
My lens cap shattered during delivery, here is a new lens cap in case the same happens to you. I do not recommend the telescope!
Doppel-Zahnrad mit 104-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die Steigungen 13 und 26…
Doppel-Zahnrad / Wechselzahnrad mit 108-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
It was inspired by Ugmonk's Analog system and Jonathan Kutscher's Gridfinity Ugmonk Analog Holder . I modeled it from scratch to learn parametric design in Autodesk Fusion. It's designed for 3 * 5″ or 76 * 127mm index cards. It can fit…
Picked up a 5" solar filter and adapted it to my Celestron Nextstar 127 SLT. Here is a link to the filter... https://www.amazon.com/dp/B0BTZZYNQL/ref=twister_B0CWMCMNCC?_encoding=UTF8&th=1 Print Settings Printer Brand: Bambulabs Printer:…
Doppel-Zahnrad / Wechselzahnrad mit 114-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
If you like it ;) https://www.paypal.com/donate/?business=7XGV4A3E8RBRL&no_recurring=1¤cy_code=EUR https://www.buymeacoffee.com/gz7m4kqbw Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: 0.4…
Doppel-Zahnrad / Wechselzahnrad mit 125-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit dem 125-127 Doppelzahnrad anstelle des originalen 120-127 und dem…
Doppel-Zahnrad / Wechselzahnrad mit 115-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die…
Doppel-Zahnrad / Wechselzahnrad mit 116-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 ist die…
Doppel-Zahnrad / Wechselzahnrad mit 126-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit dem 126-127 Doppelzahnrad anstelle des originalen 120-127 und dem…
Story: I was walking home after observation of C/2023 A3 (Tsuchinshan-ATLAS) comet. Our dog (labrador), happy to see me after 2 hours, jumped on me in a way I fell down on the ground. Unfortunately, I was holding the tripod legs, and I…
Doppel-Zahnrad / Wechselzahnrad mit 111-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 ist die…
Doppel-Zahnrad / Wechselzahnrad mit 122-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit diesem Doppelzahnrad anstelle des originalen 120-127 und dem 32er…
Rough External Model for a TEC1-12706 Peltier Plate with dimensions 40 mm x 40 mm x 3.9 mm and a 16 AWG wire. Ceramic Plate Thickness is 1 mm on either side. Groove Dia is 1.9 mm. Built the model to get a better picture on a project I'm…
Replacement Leg Clamp – Celestron PowerSeeker 127EQ Tripod (Common EQ) Tripod repair • Telescope replacement part • 3D printable clamp This is a replacement leg clamp for the "Common Eq" tripod by Celestron for Telescope Power Seeker 127…
127mm Vulcano-A shell naval gun, not 100% accurate but close.
Doppel-Zahnrad / Wechselzahnrad mit 123-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. Mit dem 123-127 Doppelzahnrad anstelle des originalen 120-127 und dem…
Just print all three parts, push the cables through the big hole and then squeeze the two halves of the plug into the opening.
