Counting matching models…
Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
I printed as follows: printer - Prusa MK4s filament - Generic PLA setting - 0,15mm SPEED fill - 50% I added a round base to the original model as a subfloor for the above mentioned camera. The metal washer supplied by the camera…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
Remix from original model to fit the plate for Bambu Lab X1C. File uploaded is meant to be opened in Bambu Slicer. [Update] Added stl file for other slicers. Realise that some will want to print this in anticipation for the arrival of…
Hi Everyone, I had trouble having a decent print finish with the official bambu lab and generic preset. After dozen of trials and errors, I finally managed to get great results with TPU. I included the 3MF file for bambu studio with all…
Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…
Print this guiding template for easy placement: 0.20mm Standard @BBL X1C Place diagonally PLA Follow this picture for sticker placement: QR code for all Bambu Lab build plates: Textured plate High-Temperature plate Engineering plate Cool…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
This is the full kit to raise the Creality K1C lid to minimise/ eliminate the issue of cable chain bumping onto the lid when printing at the left edge (when viewing the Creality K1C from the front). It also eliminates the issue of…
Why might you need this? Following my design of a top-mounted spool holder to allow my Creality K1 Max to print TPU more reliably I received several requests for a similar model to work with the K1 and here it is! This will allow the…
Max flow test for bambulab slicer WARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to…
EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…
Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C tools that came with the printer (except glue and grease). external height…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…
Some feet for the Bambu Lab Plate Holder by Alvin Pan https://www.printables.com/model/270579-bambu-lab-x1c-plate-holder to help keep it from tipping over. Currently 60mm wide and friction fit but can be widened and glued if needed. STEP,…
The camera on my k1c was not perfectly centered so I redesigned the bracket with an angle of 10 degrees. It replaces the original one, just unmount the whole camera (1 screw) disassembly and replace the original bracket with printed one…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
This is a remix of the poop bucket from @EnricoPulvirenti I basically added 3 holes to be able to add 3 magnets to avoid the bucket to move behind my printer. The magnets I used are these ones, 5x3mm :…
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C tools that came with the printer (except glue and grease), plus room for the…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…
This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…
Recommended slicer settings: Layer height: 0.1 Initial Layer height: 0.1 Infill: 100% Print material: Preferably ABS+ or ASA, although I've printed it using PLA and it's holding up well. Tutorial: A good tutorial on how to use the shims…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
This model does require 2 10mm magnets to standup properly. I used 2mm thick magnets and they do sit flush now. If you opt to go no magnets then I'd recommend using tree supports with 0 interface layers. This is a quick and easy way to…
Update: Since some new printers from BambuLab have a modified cable chain, the originally designed clip did not fit anymore. There are two variants, please check which one you need, otherwise the clip will not fit. The difference is in…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
22.02.24 - Added corner K1C logo 28.11.23 - Added ventilation grille (2 versions) for the 22mm version is printed without support in one model, nothing needs to be assembled (Disassembled model for if you want to assemble from 2 different…
I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…
Sam Schmidt from the Voron Facebook group designed an adapter for the Bambu Lab hotend for use in the Voron Design Stealthburner. This is remixed from the STEP files he provided to the Facebook group. In the original design, Sam used a V6…
Welcome to The Skeletor Collection —discover the evolution of the Skeletor project, explore each iteration’s unique enhancements, and find out how you can get involved. 📖 Want the full story? All MK7 details and project updates can be…
The dimensions are relatively precise (tol of +/- 0.2mm) but the function dimension and maximum dimension, those, are spot on. If you find any error, please let me know. This design is free for the benefit of the community, but if you…
This is a Remix of kjbturok s Bambu Lab X1C Plate and Gluestick Holder to fit both the big 3DLAC Spray Can and the smaller Spray Bottle. Additionally it can hold the Bambu Lab Glue Stick, another Spray Bottle with ~33mm diameter (I have…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
A stand to hold up to 3 Bambu Lab plates or plate stickers. This remix adds small feet to make it a bit more stable. Mine is printed in PETG but PLA should be fine, no supports or brims required and 15% infill.
He Catch every Poo from your Bambu. You must never more grabe behind your printer.
I've used the Spool Roller by thrutheframe for quite a while until in noticed, that some of the spools on the market won't fit - most popular the Prusament spools, which you need to force on the roller until the front tab breaks off -…
PLA or PETG 0.2 mm 15% Infill Thanks for downloading in advance and please don't forget to like this modell!
UPDATES: April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 April 7th : Added “w ireless test jig” to help with assembled…
EDIT: Added second version with bigger spacer, to release the tension on bowden tube. Requires 2x M3x8mm cone bolts, but tbh any M3x8-10mm bolt will do :) Bowden tube is stock, filament sensor bolts are stock! Designed for K1, but should…
Creality K1C Filament Holder
I needed storage for my X1C. I also didn't like having the poop bucket behind it. This build directs the poop into a large drawer. There are also 2 other drawers with a tray and dedicated space for your hot ends. The recommended way to…
here is a screen cover for the K1 and K1 Max and K1C and K2 plus supports maybe required all depends on how well your printer is calibrated i put a slight chamfer on it so that the door does not catch If you like the model please leave a…
Für die Montage werden die beiden Schrauben vom Hotend verwendet + 1x M3x14mm und 1x M3 Mutter . Die Messurhalterung gibt es in zwei Ausführungen. Einmal mit Standard 8mm Schaftklemme sowie einmal für 3/8inch und ist somit für alle…
Bambu Feed Splitter UPDATE Purpose Many versions of these are available on the site. They attempt to solve a basic problem when dealing with the AMS. There are filaments that will not a few the AMS for a few reasons. This means that you…
Add flexibility to your nozzle cleaner,
Another first layer test print. This print makes use of as much of the bed area as possible, without having to disable the filament cutter standoff. X1C users should print without the flow calibration pattern enabled. Useage 1: A simple…
Anycubic Kobra S1 / S1C - Tool head cover maintenance Essential design for maintenance your S1 and S1C. The model is designed to hold the front cover of toolhead for nozzle changes, hotend maintenance... without having to connect and…
Updated on 11/26/23: Added more support where the bottom of the roller tray meets the coupling. I also modified the nipple on the roller and the Square Key Peg to be a little more snug. I recently got a K1 to replace my E3P. I wanted to…
Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…
UPDATE 10 Dec 2023 Be care ! Three heatsink dimensions seems to be used by Bambu since the first release… An heatsink 35x18mm for the X1C model. (my case) An heatsink 39x22mm for the P1P model. (validate by one P1P owner, thanks to Oniiz)…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
I had to dismantle the doors because they were not compatible with the feet. I mixed the parts again and added additional parts. I turned the bottom hinge upside down and changed the screw holes and the problem was solved. no more…
Changelog: Added Polymaker Polymax PC (4/23/23). Note that default elephant foot compensation may be insufficient for this filament and you may need to increase it in your slicer profile. Alternatively, you can change the Z-offset for…
Side Filemant Guide for the P1P if you use a Side Mounted Spool Arm / Holder It is designed to screw directly into the left upper frame of the printer, for extra stability and in the back of the frame, where it replaces the original PTFE…
Parts needed: Bolt M4x45 Bolt M3x6 (x2) Bolt M3x10 (x2) Nut M3 (x2)
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
I had a few extra tools I wanted to store, and loved the tool tray that rotates out, so I modelled this. Makes a great pairing with the original. It does not block any fans underneath.
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace. Thanks to its magnetic attachment, the…
Side mounted filament runout sensor. Requires two m3 x 8mm or m3 x 10mm bolts for printer. Make sure the thread is no longer than 10mm as it will protrude too far into the machine.
These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…
A great and space saver solution for storing your complete hotends by Bambu Lab. No support needed.
Designed with a flange on the right hand edge to rest on the door jamb, and a large flange for the door sit against along the top and the left hand side. Print it flat with the door flange side on the bed - support is needed for the door…
Updated 04.13.2023 I've added a .stl file for the X1C that avoids the extra purge line in the rear left corner of the machine. You'll need to run the print without the automated flow calibration. Use a known calibrated filament profile…
Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)
this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…
The Mount This mount replaces the stock housing for the BTTEddy probe, bringing it in like with the Y axis of the nozzle. This makes it so we no longer have to worry about Axis Twist Compensation . The mount can be easily installed using…
UPDATE 2024-0214: I added a version for the K1 MAX with the help of @mmeidl78 doing test fits on his K1 MAX; thanks. Stylish side mount spool holder for the K1/K1C/K1 MAX styled after the K1C prerelease photos. Hardware needed: 2x M3 x…
I have many more versions and styles of these boxes over at MakerWorld. Please check them out! There’s an updated version of this box as well as some with customizable dividers and even an empty box that you can put whatever you want in…
