Counting matching models…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Bambu Studio Strength Walls Detect thin wall “ON” Bambu Lab Z axis cover for P1P P1S X1 Thank you ;-)
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Print with PLA Support and Brim not necessary (if then use tree support) 15% Infill (for better material stability use gyroid infill) To look better use the Arachne wall generator Thanks for downloading in advance and please don't forget…
Print approx. €5.38–€6.58 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
Mit diesem Adapter lässt sich Marc Neuhaus' Model auch für den Mini nutzen Das Original habe ich nur editorisch angepasst. Beschriftung geändert und Fasen hinzugefügt. Das folgende Bild zeigt den mittels Adapter eingebauten Shelly Mini…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
IMPORTANT Please read the whole project posts before deciding on ARC enclosure. Download the user guide (ARC Manual), Bill of Material (BOM) and ARC Panels DXF in the “other files” section. Read the user guide to better understand how to…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
Bambu Lab P1P Cable Chain Assembly (1/9/2023) Designed a few parts needed to attach a cable chain, similar to the one seen on the X1. The chain helps keep the USB cable and PTFE tube completely inside the P1P, which is needed if you're…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…
Bambu Lab P1P Printable Cable Drag Chain I created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design…
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
V2 available here: https://makerworld.com/de/models/1577703-bambulab-anti-vibration-feet-v2-p1p-x1c-p1s-tpu#profileId-1660067 These are anti-vibration feet for the Bambu Lab X1/P1P, inspired by the original ones that can be bought in the…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
Garbage container for bambulab, using 6 neodymium magnets 8x2mm. The magnets must be installed using glue. Installation is made easier with positioning tabs.
Hardware needed: (5) M3x6 (2) M3x4 Print needed: (1) Outside PTFE Mount (1) Inside PTFE Mount (1) Mounted Link (1) Starting Link (~25) Links (3-5) PTFE Links (~30) Clips (1) Ending Link (1) Extruder Mount (1) PTFE Guide Use baseplate tree…
The original Chamber Temperature Regulator Fan is controlled via GCode - but the fan duct is not present on the P1P (neither is the opening on the back). This duct allows you to use the stock official X1 Fan from the Bambu Lab Store in…
Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…
A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original features of the case accessible with a possible upgrade path to existing models, that…
This is a remix of the poop bucket from @EnricoPulvirenti I basically added 3 holes to be able to add 3 magnets to avoid the bucket to move behind my printer. The magnets I used are these ones, 5x3mm :…
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…
Update 27/12/2022. I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also…
Rygar1432 innovated the printing of transparant PETG and /u/PovertyPainter tweaked it for use on the P1P. Here are their findings as two 3MF files. Added a JSON files as well for easier import. Update 6/3-23: I realized that i put the…
Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…
UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…
This is a 20° bracket that guides the ptfe tube of the P1P to run the same as X1/C. This can be used standalone and as part of the Arc for the P1P. The holes for M3 are meant to be self-threaded so I do not need to use an insert. The hole…
Design your own side panels with these P1P frame model templates, provided in STP format (3DM available on our wiki). Unleash your creativity. We can't wait to see what you'll be able to create !
Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…
Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S
Turn your Bambu Labs P1P 3d printer into a Borg Cube with this MOD. 16/04/2023 - Please note assembly instructions have been amended. Please read thoroughly. This design has been uploaded in two parts due to licenses. The parts under Part…
Minimalist screen frame/faceplate/protector for the Bambu Lab P1P. Remixed from the BU Faceplate by 3D Sourcerer Jan 31, 2023 Update: Added a second version that is compatible with the ARC enclosure. The original version, at least in my…
Do you want to print as clear as you can on your printer? This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C. I've tried several different parameters and come up with…
Attention: I take no responsibility for damage to your printers These profiles were created from base BambuStudio. The use is as good as BambuStudio only faster and better features! There are 2 presets: 1. P1P w Bed Leveling 2. P1P…
Update: Since some new printers from BambuLab have a modified cable chain, the originally designed clip did not fit anymore. There are two variants, please check which one you need, otherwise the clip will not fit. The difference is in…
Spool Arm for side mounting the original spool holder It is designed to screw directly into the left support beam of the printer, for extra stability - other spool holders that float right next to the printer tend to sag quite a bit BOM…
This design has been uploaded in two parts due to licenses. 16/04/2023 - Please note assembly instructions have been amended. Please read tboroughly. The parts under Part 1 are remixed from Bambu Lab's side panel designs. As such these…
Allows PTFE tube to run through printer frame for use of lid
17.12.2023: I advice to not use additional tube clips because they restrict the movement of the PTFE tube too much, what can lead to colission. 14.10.2023 ADDED V2 I modified the support structure to add a bit more clearance to the wire…
The dimensions are relatively precise (tol of +/- 0.2mm) but the function dimension and maximum dimension, those, are spot on. If you find any error, please let me know. This design is free for the benefit of the community, but if you…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
I've used the Spool Roller by thrutheframe for quite a while until in noticed, that some of the spools on the market won't fit - most popular the Prusament spools, which you need to force on the roller until the front tab breaks off -…
PLA or PETG 0.2 mm 15% Infill Thanks for downloading in advance and please don't forget to like this modell!
UPDATES: April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 April 7th : Added “w ireless test jig” to help with assembled…
Für die Montage werden die beiden Schrauben vom Hotend verwendet + 1x M3x14mm und 1x M3 Mutter . Die Messurhalterung gibt es in zwei Ausführungen. Einmal mit Standard 8mm Schaftklemme sowie einmal für 3/8inch und ist somit für alle…
Another first layer test print. This print makes use of as much of the bed area as possible, without having to disable the filament cutter standoff. X1C users should print without the flow calibration pattern enabled. Useage 1: A simple…
This enclosure features acrylic side panels and possibility to showcase your P1P in 2 colors. I chose orange to match my current setup :) It uses around 700-800g of filament in total. Please use brim so it sticks to the bed properly ! I…
These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer. The bezels are optimzed to be printed with the standard 0.16 “optimal” system setting, no support or brim needed. They will be pressed on the screen…
Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…
This is probably the first fully printable case mod for the P1P (maybe). Important Update: 23.01.2023. Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i…
UPDATE 10 Dec 2023 Be care ! Three heatsink dimensions seems to be used by Bambu since the first release… An heatsink 35x18mm for the X1C model. (my case) An heatsink 39x22mm for the P1P model. (validate by one P1P owner, thanks to Oniiz)…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
I wasn't happy with slinging the tool head cover over the top rod - leaving it in a precarious position / stressing out the cable during maintenance. Here is a simple hanger which loosely rests over the top rod and fits into one of the…
Here is a Temp Tower for PLA 200 - 230, it is made for my P1P, I dont now if it also works for a X1C There are 2 files, 1 stl where you can set layer temps yourself, and one 3mf where I have set temps acording to the model.
Side Filemant Guide for the P1P if you use a Side Mounted Spool Arm / Holder It is designed to screw directly into the left upper frame of the printer, for extra stability and in the back of the frame, where it replaces the original PTFE…
Parts needed: Bolt M4x45 Bolt M3x6 (x2) Bolt M3x10 (x2) Nut M3 (x2)
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
Inspired by MihaiDesigns, I wanted to create a quick color purge test that didn't involve generating a lot of programatic G-Code. My testing strips are designed to print the starting color then switch filaments and resume printing with…
This P1P frame includes slots for 16in x 12in x 3/8in acoustic panels to reduce sound and provide an affordable way to enclose the P1P. Designed to be cheap - no expensive fasteners, acrylic, or other extra hardware beyond small magnets…
If you haven’t watched the YouTube video, it may be helpful for assembly at around minute 19. Here’s the link: The faceplate was designed to be printed in two colors – black looks great since the printer is also black but feel free to…
The frame and panels are different for the P1P vs X1. Remixed to fit a square corner. Sorry, I smoothed the original the best I could to reduce file size.
A great and space saver solution for storing your complete hotends by Bambu Lab. No support needed.
Updated 04.13.2023 I've added a .stl file for the X1C that avoids the extra purge line in the rear left corner of the machine. You'll need to run the print without the automated flow calibration. Use a known calibrated filament profile…
Latest Update All other previous updates will be posted at the bottom. Update (4/18/2023) *Updated file - Light_Bar_Design_Final_4A to 5A and Light_Bar_Endcap_2B to 3B Based on the feedback received from @suit , I added detents that will…
UPDATE 19 Feb 2023: A new toolhead cable is required when using the X1 cable chain. It will be available at the Bambu Lab store soon. (will update when it's available) When you install this bracket will only require the cable chain and…
End cap for on top of the Z-Axis of the Bambu Lab P1P and X1(C). Printed in ABS on textured PEI plate in high resolution. The caps are slightly smaller then the hole of the z-axis so they can easily be removed or move/rotate. ABS is used…
Work in progress until the Beta test. The day of receipt of my p1p. Travail en cours jusqu'au test bêta. Le jour de réception de mon p1p
Here's a good looking and reduced filament option for a steel sheet / bed holder for the Bambu Lab printers (X1C, X1, P1P). It has room for up to 4 sheets or 3 sheets and a slot for bed stickers. It also has a spot for the BL scraper and…
A garbage bin for the P1P and X1 printers that funnel the ejected filament to the from of the machine. This way you don't need to reach around to the back of the machine to empty the bin or check if it is full. Model prints in 3 pieces…
file with ready-made supports - bambulab p1p
Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit. Important Update: 23.01.2023. Printing these Files is complicated.…
Just a quick remix (of the 38mm version) to be able to print the duct with no (or pretty much no) supports. Print it vertically and the only places where you can add minimal support are insert slots, I printed mine with no supports at all…
When you print on the X1 (or P1P) at very high temperatures, the magnets in the build plate lose strength. This can cause the bed to shift. Or in some cases the corners of the build plate will lift off of the magnetic surface entirely,…
PLA or PETG Nozzle: 0,4 mm Layer 0.20 mm Infill: 0% Upper surface pattern: concentric Thanks for downloading in advance and please don't forget to like this modell! Other cover see here:…
Aufbewahrungs- und Transportbox für das komplette Hotend (inkl. Lüfter, Silikonsocke, Thermistor und Heizelement) der Bambu-Drucker. Mit Sichtfenster damit man sieht welche Düse verbaut ist. Die Box für einzelne Düsen findet Ihr da →…
Made some major changes in V2 with suggestions from @MediaMan3D. The focus here was to eliminate plastic from the sides, have the front weight load of the AMS rest on the front corners versus relying on a bow joint, and added some wire…
There's a useful USB port behind the P1P's LCD screen, but running a cable to the USB port could interfere with the printer. This print keeps the cables out of the way and hidden from sight. I've made a few mods for the P1P where you can…
This remix has thickened the walls of the PTFE clip as well as the walls of the Cable chain hotend mount. The original parts would easily break.. This remix is also updated to use M3 and M2.5 Threaded Inserts. No nuts or washers required.…
Aufbewahrungs- und Transportbox für die sichere Aufbewahrung aller Düsen der Bambu-Drucker. Mit Sichtfenster damit man sieht welche Düse in der Box liegt. Die Box für das komplette Hotend findet Ihr da →…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
An updated side spool holder that I did for the X1. This one is 10mm shorter and the filament feed hole is 20mm lower, making it feed a little easier. Designed to fit the P1P, with a 90-degree mount for the connecting coupling. I printed…
This is a modified version of @ktothestank slider vent top enclosure (without LED). 2023-05-26: Additional info: I used the file "Slider - Final Remix Design - v3.step" from the folder "Working User Files" of…
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
This is a simple wall box measuring 80mm x 80mm for the Shelly Plus 1PM to be wall mounted. Two M16 or PG9 cable glands can be fitted for cable inlet/outlet. For screwing the lid onto it use 4 x M3 x 8mm counter sunk screws. Included also…
Updated (03-31-23) This is a remix of suit the "Bambu Lab P1P "Minimal" Enclosure + Door" ( https://www.printables.com/fr/model/381777-bambu-lab-p1p-minimalistenclosure ) which is an excellent design, and I own him all the credits for the…
Quick and easy poop basket for Bambu Lab P1P, P1S, X1. Big enough to pick up poop, but small enough to not touch your filament spool. Just place it behind the printer, you don't need any magnets or screws! Dimensions: 80mm x 55mm x 170mm…
