Counting matching models…
This is a print-in-place 608 bearing with 8x 5mm ball-rollers separated with distancers. I made it using ±0.1mm tolerances, as all the other models that I found either were too wobbly due to higher tolerances, or were difficult and…
faucet garden adapter 4 variants M22x1 faucet → quick coupling for hose M22x1 faucet → 1" ¾" & ½" outer thread use 6x3mm or similar gasket for quick coupling Print settings 5 walls 0.1mm layer 30% infill no supports
The fine thread M22x1 is often used for in house water taps. You need in addition a O-ring and a rubber gasket for the connection between adapter and the water tap. Printed with 0.12 layer height and in PETG.
Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…
Tower Guards for the TLR 22x4 I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got "TY24MX Thomas &…
Remix Description: Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL…
This lets you run a Voron Stealthburner + a Bondtech LGX Lite + a KNOMI + and EBB 2209/2240 I have it up and running on my printer so it's tested, sample size 1.
Silika Korb Behälter mit Durchmesser 22mm und einer gesamtlänge von 67mm Silica basket container with a diameter of 22mm and a total length of 67mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0,2mm layer hight; 0,4 nozzle Infill: 15% Filament brand: FilamentPM Filament color: black Filament material: PETG Notes: 1x: body 1x: riser 2x:…
This mount allows you to mount your 22x22x8mm GPS on the front of the Mario5 Frame. It is designed to fit the GEPRC M10 Series but works with other GPSs aswell. Just look out for the dimensions.
A simple one-piece 608 bearing (8mm x 22mm x 7mm) without balls suitable for replacing a real bearing for testing or static modifications. Designed with tight tolerances, rounded corners, and printed in PLA in minutes. Edit: Added a new…
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
GPS Mount made for VOLADOR II. It may be compatible with other drones. Printed on TPU 95A 20% infill
Inspired by the Duplo Baseplate Puzzle I wanted to print the biggest single piece Duplo baseplate fitting the new PrusaXL. I came up with a 22 by 22 nubs baseplate. (352x352mm in 100%, 356x356 in 101% scale factor.) Scale Factor Duplo…
Small Wiring Junction box 22x15mm to fit 2.5A terminal strip with two connections.
The original file didn't fit on my ender 3 V2 but I didn't want to print it in two parts. There are still lots of details where the baseplate fits in the L-boxx so it would still fit snug. I will add a make or add a photo when it has…
The original design did not have spacers for the inner fixed part of the bearing and did not allow for free revolution. This is designed to fit 22x7mm ø8mm (hole) bearings.
These wheels are based off of the factory wheel dimensions. You will get the best results printing with support (required to get the final lip on the top to be 90 degrees for a good seal on the tire). Select the option to print support…
To assembly it correctly, use some hammer, or just use hot air to get your bearing warmer.
Bonsai pot 33 rectangular curved inward 162x122x42mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Kitchen organizer Box 22x22x10cm I use it for car slleping build Print settings 0,2mm layer 5 walls 15% infill no supports
Bicycle crank cap m22x1 Print the model as it is loaded - you need to enable supports in the slicer. I used ironing when printing. I printed from PETG Nozzle 0.4 Layer 0.12 Minimum 5 walls CONCLUSION 💚💚💚If you enjoyed the project please…
Hey fellow makers! Please note: These are just the 608 bearings, the extra fidget spinner that I used to show the spinning potential will be available here >>> […
Printet with PLA+ a connector between faucet and an adjustable Dual Mode Sprayer
Update 10/26/23: It was brought to my attention that the original design did not fit the 81t spur which is included with the slipper and center diff. I redesigned the cover from the ground up using Fusion360 instead of TinkerCAD and…
It's a small, simple and quick print. Normally you need two sleeves for a door.
This was designed to fit two of every sway bar because the front and rear bars are the same. Since tolerances with 3D printing can vary a fair bit you may need to scale parts up or down to get the fitment just right. A little sanding on…
This model is an adapter that connects a garden hose connector of standard size M32 with 2 mm pitch to a standard size M22 sink thread with a pitch of 1 mm. Use a rubber gasket with an outer diameter of 18 mm inside the adapter to make…
Hier ist eine Box mit Deckel und Verschluss, inspiriert am Design einer Blech-US Munitionskiste der Größe 1 - jedoch verkleinert! Die Innenmaße betragen ca.33,6x122,6x85mm. Druckbar ohne Stützmaterial, in drei Teilen. PLA und PETG haben…
Used on a kitchen faucet. Attention! - The part can be printed without supports - placing the external thread closer to the table. But in this case, there are problems with adhesion to the bed. For this, I added an additional cross that…
For my latest FPV mini quad build i wanted to use tubular carbon fiber arms. For this project i created a set of motor mounts for 12mm od tubes. The most popular motor sizes in the 200 - 300mm class are 18XX and 22XX. So there are 2…
Rifle scope cover with front 65 mm and rear 43 mm diameter. This is Nightforce NXS - 5.5 - 22 x 56 mm. Print with no supports, PLA
This fan mount for the Protek RC PTK-2112 fan ( or equivalent ) and TLR 22x4 Elite 4WD buggy makes two key improvements over the stock setup. First, it moves the fan back in the chassis for much improved airflow, as the fan is no longer…
Kitchen cutlery organizer Box 22x22x10cm I use it for car slleping build three areas for organising cutlery and other kitchen tools Print settings 0,2mm layer 5 walls 15% infill no supports
Phillips Hue Switch Cover and adaptor for the V2 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Open cablechain with clip 22x30x15mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories
It works fine, but as the water contains no air it splashes too much back up when it hits the sink I used variable layer height and 0.12 for the threads,the rest is 0.2 Printed in green Clas Ohlson PETG
This shower faucet addon came out pretty good. Its actually what I wanted. The nozzles are directed to a center point 400mm below the faucet outlet so the water beams flows almost perfectly straght down. Print in PETG to ensure it will…
I needed a panel Nut for my potentiometer. I couldn't find any special models that met my requirements, so I made it myself, and maybe I can help someone with it. It's not fully screwed on because it has a recess for the potentiometer…
Da die Originalräder vom FMS-Kingfisher steinhart sind, habe ich ein neues Rad gemacht welches weicher ist. Mit den 4mm Naben sollte das komplette Rad das Originalrad 1:1 ersetzen. Pneudurchmesser 122mm Pneubreite 50mm Dazu gibt es auch…
Radial-Wellendichtring Ø 35 x 22 x 6 (Simmering) !!! NICHT FÜR VERBRENNUNGSMASCHINEN oder Schmierstoff haltige Getriebe geeignet!!! !!!Dies Teil soll einen handelsüblichen "Simmering" ersetzen. ACHTUNG NICHT in Verbrennungsmaschinen,…
Standard 608 bearing size measuring 22x7mm 22mm diameter 7mm height with an 8mm hole Print at .1mm or lower layer height Low friction and spins freely Cylinder bearings for print in place cylinders are kept in place with groove
Tiny lightweight box to organize small objects and tools on a desk.
This is a tuning needle I created based on my old broken piece. These can easily break during maintenance. Keep in mind based on the 3d printing process this tends to have a more muted color compared to the original pieces. I recommend…
Kappe mit Innengewinde M22x2,5 Gedruckt mit PETG von Prusa in Qualität mit 15mm Cap with a theard M22x2,5 Printed with PETG from Prusa in quality with 15mm
Phillips Hue Switch Cover and adaptor for the V1 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Eine Abdeckung für einen 22x10 Kabelkanal
This is a simple yet effective adapter that converts a G3/4 (26.4mm) faucet thread to an M22x1 (22mm) thread. It is ideal for connecting various accessories such as aerators, water filters, or hose adapters to your faucet. The design…
Broke the stock and the price to replace was 2 bumpers for $7. Print in TPU for a virtually indestructible bumper. For best durability, print in TPU or PETG, although PLA+ has lasted a long time as well. Print in an upright orientation…
PE112245 3.7v 1000mah 22x36x12mm LITHIUM CELL ------------------------------------------------------------------- Rechargeable lithium cell common in vape devices such as Breeze Pro.
Print the parts with the standard Voron parameters.
This is a collection of replacement rear sight blades for the Crosman 13XX/22XX series of airguns. They directly replace part OS244. These are designed to fit very snugly into AlanMoulding's Steel Breech Rear Sight. Depending on the…
The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…
A concept that began with a question: What if Federal made a larger version of the 2T-22 based on the STH-10? Thus, the 2T-22XL was born. This design uses Nascarsimracing1's 1:3 scale STH-10 as a base, with an additional 10-port rotor…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Mount for 22XX size motors to 18MM Carbon Fiber Tube. Did not print yet. Probably needs supports. 100% infill for strength ABS or PETG recommended. Category: R/C Vehicles
These TPU pieces are more than just shock tower guards for the TLR 22x4 4WD buggy; they integrate the shock bushings, and the rear ‘fins’ help absorb energy during upside-down impacts in order to help save the rear wing. There are two…
LGX lite EBB22xx cover for CAN cable support.
This motor mount can be used to bolt a 22xx size motor to a plate, so that you can take the motor on and off as needed. Parts required: M3 6mm Cap head 4x M3 6mm Countersunk 4x Category: R/C Vehicles
This simply sits under the camera and on top of the monitor, the slight bend of the camera arm will hold it in place, but it doesn't secure to the camera directly. It will lift the camera up enough to clear a thin bezel monitor while…
Made for the AeroForge Sport Flyer V1, a 3D printable 900 mm RC plane: https://www.printables.com/model/1895562-sport-flyer-v1-3d-printed-rc-plane-900-mm-sport-ae Parametric motor mount for small RC brushless motors (22xx/23xx class like…
Matica pre záhradný postrekovač nemá bežne dostupný vnútorný závit. Originál diel sa mi nepodarilo zohnať, preto som vytvoril tento model aj pre ostatných.
This is an axle thread cover I made to help prevent rust when my vehicle is running winter tyres. This cover is for an M22 x 1.5mm thread. I recommend using PETG for this part. My experience is they tighten up nicely against the inner…
Please note: This model contains non-printable parts. Specifically, you will need four 22x8mm inner radius x 7mm width bearings. These bearings must be firmly seated on the axles using a hammer or press. It's recommended to print the base…
There are two versions of this mount for each car. One if you are using the rear tower guard I designed and one if you are not running a rear tower guard. This part should be solid TPU and everything just mounts with zip ties. You can…
Endcap for M22x1,5 thread. I made this to protect the threads and the internals of my pressure washer attachments. Printed in PETG with 15% infill. Model should have enough clearance to screw on, scale if it's too tight for you.
22x22cm friendly version of the feed hole jig provided in the Ult. Filament Dry Box model.
Adapter M22×1 male to G1/2 BSPP male – 12 mm bore
This was my quick design of a webcam cover for my Logitech C922x webcam. It certainly doesn't have the most beautiful "form" but it certainly is functional, and is easy to put on and remove. Improve your privacy for just a little bit of…
This TPU front bumper for the Team Losi Racing 22x4 gives some improved shock absorption over the stock plastic piece. Although head-on front collisions with the bumper are somewhat rare, the bumper reapeatedly makes contact with hard…
Printed at 0.12mm layer height with a 2mm brim. No support required.
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
Raccord à rotule pour robinet Ø22 x 1 mm avec mini pommeau imprimable Ø50 mm. Inclinaison nominale 0 à 25°. Grille démontable : 61 trous de Ø1,2 mm. COMPATIBILITÉ : vérifier une sortie mâle Ø22 mm, pas de 1 mm et environ 5 mm de filetage.…
Regal für 3 USB Festplatten .
One of the less known works of the Cults of Mars decorating the "posh" residences of the upper class of the imperium. Standard walkway WH40k terrain. These can be used with the support pillars in the OBL collection or those compatible…
This is the spinner part of the Kamski 608 8x22x7mm bearing so you can test out the spin of your brand new bearing! For the bearing please visit here: https://www.printables.com/model/1281108-608-bearing-8x22x7mm-using-6mm-airsoft-bbs I…
Please note: This model contains non-printable parts. Specifically, you will need four 22x8mm inner radius x 7mm width bearings. These bearings must be firmly seated on the axles using a hammer or press. It's recommended to print the base…
M22 × 1.5 thread +0.40 mm built-in tolerance 17 mm standard ball joint 17.6 mm hole size for the ball to pass through 29.0 mm outside diameter
Just a strong box with a size of 22x17x7,5cm I print it with PETG 3 perimeters and 40% infill But u can use any material you want You need a 22,5cm 1,75mm filament string for the hinge
This is a direct replacement for the plastic screw adjusting the Player-Speed. In German its called “Justierschraube” and it has the original Part No. 228 111 Fits Dual 1224, 1225, 1226, 1228, 1229 as well as 1214, 1215, 1216, 1218 and…
——————————————— Deutsch ——————————————— Einschraubbarer Trichter für Ölwechsel Diesen Trichter habe ich selbst konstruiert, um den Ölwechsel an den Achsen meines Kramer 312LE deutlich zu erleichtern. Bisher musste ein normaler Trichter…
A client asked me to design a replacement thread cap for the coolant tank of their Voge motorcycle, and this is the resulting V1.0 design . While it is fully functional, there is still room for future improvements and tweaks. What's…
Spool Holder Attachment for 608zz ball bearing - 8x22x7 size. Its an attachment used to hold different spool sizes less than 74 mm. this will improvise the existing spool holder to hold multiple spools. (<74 mm) however your spool should…
This is a simple replacement battery strap for the non-Elite version of the TLR 22X-4 kit. It is intended to be printed out of TPU. The print settings are very important so that it stretches like the OEM rubber strap. Print settings: 1…
22x1mm to 26x1.75mm (3/4") adapter - sink to garden hose For taps with a 22x1mm male thread. You need a standard 3/4" quick coupling to connect the garden hose.
es ist zu empfehlen aufrecht zu drucken und mit Spiegelklebeban an den Frame zu kleben
Hier ist eine Box mit Deckel und Verschluss, inspiriert am Design einer Blech-US Munitionskiste der Größe 1 - jedoch verkleinert! Die Innenmaße betragen ca.33,6x122,6x85mm. Druckbar ohne Stützmaterial, in drei Teilen. PLA und PETG haben…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
A concept that began with a question: What if Federal made a larger version of the 2T-22 based on the STH-10? Thus, the 2T-22XL was born. This design uses Nascarsimracing1's 1:3 scale STH-10 as a base, with an additional 10-port rotor…
Please note: This model contains non-printable parts. Specifically, you will need four 22x8mm inner radius x 7mm width bearings. These bearings must be firmly seated on the axles using a hammer or press. It's recommended to print the base…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
——————————————— Deutsch ——————————————— Einschraubbarer Trichter für Ölwechsel Diesen Trichter habe ich selbst konstruiert, um den Ölwechsel an den Achsen meines Kramer 312LE deutlich zu erleichtern. Bisher musste ein normaler Trichter…
For my latest FPV mini quad build i wanted to use tubular carbon fiber arms. For this project i created a set of motor mounts for 12mm od tubes. The most popular motor sizes in the 200 - 300mm class are 18XX and 22XX. So there are 2…
This model is an adapter that connects a garden hose connector of standard size M32 with 2 mm pitch to a standard size M22 sink thread with a pitch of 1 mm. Use a rubber gasket with an outer diameter of 18 mm inside the adapter to make…
DIN Holder of switch IRS-201, dimensions 22mm x 30mm. Enclosure width is 35mm (2M) It needs https://www.printables.com/model/939061-din-clip-insert-voron and 2x 3mm screws. It was developed to fit into ez9e112p2s Schneider Electric…
Modified OpenSCAD model and resultant STL file which expanded the original 10x10 Lego Dulpo build plate to 22x22. That is the maximum size that will fit on a Prusa XL printer. Beware! This OpenSCAD model takes a long time to render into…
