Counting matching models…
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Tidewater 232 LXF 2022 Center Console Boat Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
The Modell file contains top and button part of the case. There's a basic modell of the Pollin modul, too. You don't have to print it.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Remixed top half of Moyina FT232 USB to TTL Adapter, USB to Serial Converter Case by @scorf and added 3d text that was inspired by USB to FTDI Adapter Case - with pin labels by @MyStoopidStuff The text is “upside down” but just right for…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
The lid snaps in, just screws for mounting the electronics required.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
For the realization of this small box you will need: USB converter: https://www.gotronic.fr/art-convertisseur-usb-serie-ft232rl-gt1125-26140.htm Wires with their X6 connectors of your choice. Model used in my case:…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
Simple case for FTDI FT232 USB to TTL Serial converter module. For simpler usage, it contains also description of pinout and output level switch. Designed in OpenSCAD. Printed on Alfawise EX8 with Alfawise PLA, which explains not so nice…
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2mm…
This model is compatible with the lego system.
The lid snaps in, just screws for mounting the electronics required
This model is compatible with the lego system.
This model is compatible with the lego system.
The sd.kfz 232, abbreviation of Sonderkraftfahrzeug 232 or special vehicle model 232, was an armored exploration car used by Germany in the 1930s and 1940s. This model is the 8 rad version or 8 wheels, and just like the original it has…
A case for a FTDI Adapter FT232RL. Pretty tight fit. https://cuitbuilts.wordpress.com/2018/03/04/ftdi-adapter-ft232rl-case-3d-print Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.2…
This model is compatible with the lego system.
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
This model is compatible with the lego system.
https://www.pollin.de/p/rs232-ttl-wandler-mit-max3232-810358
Simple enclosure for both ESP32 and AD8232 HR module. ESP Wroom devboard fits in very tightly - there are two holes on the bottom to push it out if needed. AD part comes with screw holes. You need 2 M3x16mm screws to hold the top part in…
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
Housing for the PCB from Waveshare. If printed with transparent filament, LEDs are still visible. Clueing both parts togehter is optional, as the fit quite fine.
Gridfinity Klein Tool Screwdriver 32328 Could work with 323xx I think they all follow the same shape
This instrument is from a measurement done by Die Zinken Und Der Serpent by Beatrix Darmstadter. The book was published by Sammlung alter Musikinstrumente – Kunsthistorisches Museum in Vienna. The initial instrument was created either the…
More info on the PCB can be found here: https://ftdichip.com/products/usb-com232-plus4/ The board is based on an FTDI chip. It is capable of converting 4 RS232 ports to USB. It has 4 DB9 (D-sub) connectors for the serial ports and a mini…
The print on the picture is resized by 200% i recommend you resize it to 200% as well before printing. Please don't forget to post a make and like the design if you enjoyed it :) happy printing!
TTL to RS232 adapter base small base for a cheap ebay adapter Additional parts: 2x 8mm M3 screws Category: Electronics
I've been soldering those darn DSUB connectors for nearly 40 years and finally made a mount to hold them for soldering. Uses 10mmX2mm neo magnets. These magnets hold connectors in place even when wires are connected. Mounts for DB9 M/F…
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
i changes it a littlefit to make it suite to my ft232rl board
Replacement gasket Jerry cans. This is the gasket that goes in the jerrycan lid. Wavian Part number 2325. The gasket for the Jerrycan nozzle/spout is 2325N and can be found here…
A minimalistic case for the USB-TTL module HW-417, which uses FT232RL. This is widely available on AliExpress and co. The modul needs no support and assembly is done without screws or other tools. Printing: Layer height: 0.2mm Infill:…
Case for serial port RS232. Shape sould fit on commont plastic case for this type of serial port, like this:
Inspired by the original design by plasmata this case is redesigned from the ground up to fit the current Moyina FTDI to Serial USB adapter . It exposes the pin markings on the board for easy connection ID and is a bit shorter than the…
Replacement gasket for the high quality Wavian Jerrycan spouts. This is not the same as the gasket that goes in the jerrycan lid. Part number 2325N. The gasket for the Jerrycan lid is 2325 and can be found here…
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul RS232 connector short version
I have this LG fridge and i bought this shelf 3 times already. I did not want to buy it again so i designed it myself. This is my first model so it does have some tolerances to the side that i might update. The print settings are with…
Ikea Rast Drawer Stoppers Part 102323 replacement. I made this for when my ikea drawer stopper broke and it works like a charm.
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
Simple mount for the XH-A232 amp, 4 wago 221's and a stereo jack to power the basshakers on my simrig.
Print with supports for the pegs on the back
A simple case that I made for the FT232BL board with USB-A.
In the times before USB, serial ports were used for lots of computer interconnections. In those days, they were mainly large 25 pin connectors, and adapters for the carious pin cinfigurations were required regularly. For the later 9 pin…
Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.
WIngnut for the back of the pto cover. Print with 100% infill in your choice of filament. The nut is threaded but for proper fitment run a 8mm x 1.25 tap through and then it threads perfectly.
OMPHobby M2 EVO Landing Skid Set OMP-OSHM2322
General The original shims between the frame and the rear body tub are made from aluminium and are only available in a single size. If you want to adjust the door gaps and general fitment of the body, it's nice to have custom thicknesses.…
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
A topography-optimized shelf bracket for larger shelves and heavier weights. The mounting holes are 4mm tapered to 8mm. Sized and designed to just barely fit four brackets inside a Bambu Lab X1 series printer. Recommend using a 3mm brim…
https://learn.adafruit.com/esp32-s3-ble-rs232-controller
Folds around the PCB to prevent shorting on tools. Print at 0.2mm layers. Fold it up while it's still warm but don't clip it in yet and let it cool. You'll need to trim down the thru hole pins. Insert a piece of filament as light pipes…
This is a case for the isolated USB to RS232 converter. It does not require any screws and just press fits in to place. There are two types of top cover, one plain and one with text. Print instructions Printer Brand: Prusa Printer: i3…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
This is just a simple case to protect the PCB of a S2/S3 charger module with the IC IP2326 from China. Offered at AliExpress as “2S 3S Typ-C USB BMS 15W 8,4V 12,6V 1,5A Lithium-Batterie-Lade-Boost-Modul”.
Snap fit case for a common FTDI TTL Serial Module. All the cases I could find were press fit (didn't stay together) or required screws. Plenty of clearance around the USB port and the pins to allow space for connectors. This case snaps…
Je potřeba nastavit ve sliceru a vytisknout i zrcadlový protějšek.
This model is compatible with the lego system.
Printed in PLA at 0.12 layer, 6 walls 25% infill. I use a 2 layer raft for better adhesion, printed upside down, finished, polished with 600 then 1200 paper to ensure smooth radius edges.
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
Some HiCapas do not have a regular Picatinny Rail at the bottom.They lack the slots where the screws would slip in and lock the attached "whatever-there-is-thing". To secure this adapter to the pistol you will need 1pc M3 nut 1pc M3 x…
I printed this with 10 % infill and the print time was about: 9hrs 13 min for the box 2 hrs 21 min for the top Your time will vary depending on the printer and the speeds you are printing at. On my MK2s with slower speeds this is how long…
remixed from https://www.thingiverse.com/thing:3789215
The adaptor was created to connect the 55-mm-hose-connector of our vacuum cleaner to a 35-mm-hose-connector of a wall and ceiling grinder. I added slightly more tolerance as the first two versions didn't fit. This version fits quite well…
A simple case that I remix for the FT232RL board with USB-A.
I use this esp8266/Am2320 combo to keep track of temps in different rooms and some outdoor areas for animals etc. Simple case and wall mount to monitor temps remotely. Uses M3 screws.
Snap fit case - keeps it on securely, but can be pried off to change voltage level from 3.3V to 5V :)
Maytag and other brand fridge part that is no longer made
This is a replacement part for the BMW 5 Series Touring (F11). It is the sliding clip ("leash" or "dog") located in the D-pillar track that automatically raises and lowers the rear cargo blind (luggage cover) when the trunk is opened. OEM…
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover. The used parts contain: - Arduino Pro Micro Type C - FT232RL - Small wires - And the 3d Printed case parts…
This is a remix of https://www.thingiverse.com/thing:4943843 (thank you, DinikS for your design!!) Changed the following: Top Loading (USB and Ethernet Slots open on Top). Therefore case doesn't need to be slight oversize to allow…
Volvo Penta Fitting 23238467 3883597 + key Material: ABS Infill density 100 %
Case for original f.u.n.k.e. ATR833 Sub-D connector (SSATR2) to add BLE serial for Skydemon. It is designed in a way to sit under the original connector at the back of the radio and not physically block anything else (as it's virtually…
This model is for the Graflex Film Pack 2 1/4 x 3 1/4 (6x9) holder. It allows to use a half 4x5 plate for wet collodion. The square part will fit perfectly inside, and is designed to put pressure into the plate. If you want to use a glass…
The Sidecar for Psion is portable PPP modem and linux terminal for RS232 devices powered by a Raspberry Pi Zero. Required: Raspberry Pi Zero Pimoroni Lipo Amigo Pro Pimoroni Lipo Shim for Raspberry Pi Lipo Battery 2200mAh PiRS232 Board…
I needed a dust cover for outdoor appliances with a D-SUB 9 female plug. Could not find any, commercial ones are hard to come by but seem to be flexible silicone rubber base so used TPU flex. Also added a little recess to have something…
A housing to fit a cheap USB-C to UART adapter. This is a remix by modification of the original FreeCAD files of the mini-USB version. Changes: redrawn the USB-C connector opening added recess with generous clearance around connector…
Ich habe hier den Halter des ABS Kabels an der Hinterachse neu Konstruiert. BMW Ersatzteil Nr.: (34 52) 1 154 232 Er ist, für die einfache druckbarkeit etwas vereinfacht. Befestigt wird das Kabel nicht wie beim Original (da wird es…
This is a cover for a CR2326 Light Pod from Cali Raised. I printed it in TPU.
To mount this, you'll need M4 threaded inserts pressed into the 2 holes which hold the datalogger into place. The hole diameter for the wall mount screws is ∅6mm.
Just a small case for PL2303 based usb dongles with either straight or bent header pins. Small hole allows LED visibility. glues together. Category: Electronics
This is a slim enclosure for “Hailege Mini RS232 to TTL MAX3232 to TTL Level Converter Board”. Idea is on TTL side all 4 cables are connected, other side a 2 pin 2.54mm header soldered in place. print instructions print base as you like…
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul RS232 solder holder, for easy soldering of the wiring. no supports
I took the measurement table for the SAM 232 and made the cone accordingly. Cone is easily adaptable with OpenSCAD. The mouthpieces were adapted from the designs provided by Gubbledenut and CrankyLinuxUser Please note: the inner cones of…
Keysight U123xA Mod / Repair range selector
Overview This is a modified version of David Kingsman's split-flap display. I made these changes: Unit: Changed the parts to accept 3mm self-tapping flat-head screws (no threaded inserts needed). Removed the small protrusions at the…
4-pin rs232 serial interface connector for Garmin GPS Category: DIY
This enclosure is for this model of the FT2322H development board . There are many more from other vendors, but make sure it is this exact model if you want to use this case, because there are different designs. The enclosure consists of…
STANAG 2324 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Accessories
Huawei B535-232a 10 inch rack shelf - First attempt
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
Parts were printed with a Creality Ender 3 V2 and a 0.6mm nozzle. Filament used was some noname black PLA @ 190°C with a bed temperature of 60°C. Top part has some tolerances, so it might be better to glue it to the bottom part. Was good…
I printed in PETG, 3 layers wall, 40% infill.
I like vintage computers and I came across a project where you can use a ESP32 as an emulator for an old hayes compatible dial-up modem that can connect to my wifi and to a serial port of my older computers and I can surf the internet…
This arranges 4 RS232 screw terminal breakout boards so you can wire up a sniffer for reverse engineering purpose. You may need to adapt the screw holes and the solder pits to match your breakout
A mount for the AM2320 Digital Temp/Humidity sensor to allow you to mount it and monitor the temperature within your printer enclosure from your Raspberry Pi and Octoprint. The AM2320 just snaps into place and it's a simple one screw…
ORGANIZZATORE GT232 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
LaskaKit PD-IP2326 nabíječka 2-3S 1.5A 3D model vývojové desky LaskaKit PD-IP2326 nabíječka 2-3S 1.5A Stránka produktu: https://www.laskakit.cz/laskakit-pd-ip2326-nabijecka-2-3s-1-5a/ Github:…
