Search results: 30m

Sort order

1,733 models

P
PrintablesAdam

Marble run ball/sphere in two parts (24mm, 30mm, 40mm, and 50mm)

This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
2,621
Likes
168
Rating
4.94
P
Printableskenny93

Winkel 33x33x30mm

Gedruckt aus PLA. PETG, ASA und andere, nicht Flexible Materialien Funktionieren aber auch. Mit mindestens 3 Wandlinen Drucken! Stützen sind nicht nötig. Fusion360-Datei angehängt, somit habt ihr freien Spielraum bei der Anpassung der…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
703
Likes
67
Rating
5
P
PrintablesAlvomane

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
655
Likes
126
Rating
4.25
P
Printablessorrenaveria

30min Coaster

Fast Print Coaster Uses only 1.6m filament (4.3g) I am new to 3D Printing and 3D modeling and I find it hard to model patterns Also custom patterns print very slowww So after some time of thinking I came up with an idea on how to print…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
465
Likes
81
Rating
5
P
PrintablesStabAlloy

Xtool F1 30mm pedant jig

This is a alignment jig of 30 mm standard stainless steel pedant for Xtool F1. Fits 9 pedant at single run! If you found this model helpful, please like and share!

Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant

Downloads
282
Likes
52
Rating
0
P
PrintablesLeo

Tomato Clip 3.0. (30mm)

Larger than the previous version (10mm)-(30mm) Größer als die Vorgängerversion (10mm)-(30mm)

Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
273
Likes
27
Rating
5

Ring Box 30x30mm

Das ist eine kleine wunderschöne Ring Box für Verliebte, Valentinstag, Verlobung oder für Hochzeit mit Herzlogo und verdeckter Innenscharnier. Sehr praktisch auch für Hosentasche oder kleine Handtasche zum mitnehmen. Für Lovers ein…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
20
Rating
0
P
PrintablesJohnny_X

GeeeTech A30M/A30T Extruders Lowering System

After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
15
Rating
5
P
PrintablesStevenTh

Hamster wheel 130mm diameter with spindle without bearings

The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
102
Likes
7
Rating
5
P
PrintablesCrumble

belt can holder 330ml/500ml

belt can holder for 330ml and 500ml cans. 3 types of belt connections(open, semi-open, closed) and different files for ASA/Nylon or PETG print with 0,40mm nozzle 3 walls/25% infill or 0,6mm nozzle 2 walls/25% infill slide in the top part…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
13
Rating
3
P
PrintablesAlvomane

Hooks for 28/30mm pipes | Haken für 28/30mm Rohre

This is a hook that slides onto 28/30mm pipes. Simply scale it to fit other sizes or use the step file for customization Prints the hook in STL orientation with 4 outer layers, 5 top/bottom layers and 25% infill. — I would be very happy…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
8
Rating
0
P
PrintablesKaliban

Containers 30mmx90mm

Zyliner modified in the dimensions 30x90.

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
2
Rating
0
P
PrintablesBooks

30mm Flat-face Button

A 30mm diameter button in metric units. Flat face with thin ridge and a filleted edge.

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
7
Rating
0
P
Printablesjordy lavreys

30mm carrosserie ring

30mm carrosserie ring met een 5mm gat in het midden. ik heb dit gebruikt bij een zeil vast te maken op hout

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
6,962
Likes
1,151
Rating
4.79
P
Printablestakarocks

M6 1.0mm nut and bolt (15-30mm)

I really appreciate you if you can consider a coffee for me if you like the design! June 25, 2023 Update : Added regular tolerance and tight tolerance M6-1.0mm nut I do not have M6 bolts or nuts when needed, decided to create myself. I…

Downloads
5,371
Likes
248
Rating
4.88
P
PrintablesCarl D

Radius Gauge R1-30mm - AMS Ready

Comes with two boxes and a set of convex and concave gauges, suitable for radiuses 1mm - 30mm inclusive. By default, the boxes and tiles are the same colour, with the tiles and boxes having different accent colours for concave and convex.…

Downloads
5,011
Likes
1,337
Rating
4.63
P
Printablesunit

Radius gauges 1-30mm

Little bit remixed model. See remix diferencies section. Thanks very much to Jaha for his great piece of design in original model and to kisscoool18 for his colored remix. Good job! These remixes can be now complemented by Radius Gauges…

Downloads
3,992
Likes
1,592
Rating
4.9
P
PrintablesTater Zoid

Rugged Container 30mm Edition - 6 Sizes

30mm Rugged Containers This set of Rugged Containers features a 30mm interior width with various internal heights. The heights range from 20 to 70mm. This allows a great size range for a variety of personal uses. These, along with my…

Downloads
3,337
Likes
1,351
Rating
5
P
PrintablesZelrick

30mm Test Cube

Another 30mm test cube, This one is designed to test how precise your printer is printing dimensionally, check for ghosting on X and Y, short bridging on Z and top layers on Z. It takes about an hour to print on the MK3 and the Mini,…

Downloads
3,056
Likes
111
Rating
4.96
P
PrintablesCmdrSoyo

A-10CS | Fully 3D Printable Dual 30mm EDF RC Plane

!! At the time of upload i have not yet flown my first prototype, there may be design changes based on test flight results !! The current thrust line is identical to the real world A-10 and will result in a pitch down moment when power is…

Downloads
2,973
Likes
471
Rating
4.67
P
Printablesjogu44

Radius Gauge R1-30mm [Remix]

Do you have a good benchy bottom? Two generated print profiles, 3plates vs. 5plates, use 5 plates if you have quality issues with utilizing the entire print bed. I recommend having wall-infill to outer/inner for the gauges but inner/outer…

Downloads
2,203
Likes
523
Rating
4.83
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink 2.3

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
2,098
Likes
488
Rating
5
P
PrintablesMark_Alpha

M3 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)

Downloads
2,031
Likes
153
Rating
5
P
PrintablesBig Merona

Sand scoop 130mm( about 5.1 inches)

This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form. There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly…

Downloads
1,717
Likes
669
Rating
5
P
Printablessantiniki

Solar module drain clip for 30mm panels

Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…

Downloads
1,318
Likes
82
Rating
5
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink v2

ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…

Downloads
1,177
Likes
178
Rating
4.5
P
Printablesyu-supersonic

Can dispenser (330ml tall)

Can dispenser designed for tall 330ml cans (diameter 58mm, length 146mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge).…

Downloads
1,064
Likes
589
Rating
0
P
PrintablesMark_Alpha

M2.5 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.48mm OD: 5.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)

Downloads
1,001
Likes
66
Rating
4.67
P
Printablesmhparsons

Beverage Can Dispenser-330ml

Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…

Downloads
956
Likes
395
Rating
4.5
P
PrintablesNeoRame

Honeycomb Euro Can dispenser (330ml and 500ml)

The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…

Downloads
945
Likes
142
Rating
4.5
P
PrintablesKieran E

Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…

Downloads
919
Likes
106
Rating
4.7
P
PrintablesEngeneerNick

Two-in-One Can Holder for 500ml and 330ml cans

Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…

Downloads
918
Likes
227
Rating
5
P
PrintablesCYNNIX Inc

30mm Curtain Rod Hook

Lost the hooks for our curtain rod. So designed a replacement. Fits a 30mm rod. Print as many as you need to support the length of your curtain rod. We only need two for an 8' span. Print instructions 3 perimeters with at least 15% infill

Downloads
821
Likes
90
Rating
5
P
PrintablesSV06_Squad

A10 (A-10) Warthog Bullet 30mm

This model fits nicely into a spent A-10 30mm casing. A dab of glue keeps it in place. Print with 0.1 layer height and heavy infill for realistic (ish of course) weight.

Downloads
815
Likes
56
Rating
5
P
PrintablesMark_Alpha

M3 Standoff Spacer Female-Female Round 4-30mm

Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)

Downloads
814
Likes
61
Rating
0
P
PrintablesMax

Gridfinity cups height 18 (130mm) collection

Collection of Gridfinity basic cups height 18(130mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…

Downloads
809
Likes
112
Rating
5
P
Printablesisycat

Sanwa Style Cherry MX Arcade Button 30mm

Tested in PLA @ 0.2mm layer height. No supports. Print upright as is. Works without any processing but processing is needed if good sound is desired.

Downloads
782
Likes
84
Rating
5
P
PrintablesZaxMan3D

Soda Can Dispenser Deluxe (EU 330ml 500ml)

🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…

Downloads
775
Likes
307
Rating
5
P
Printableskisscoool18

Radius gauges 1-10mm & 11-30mm

Radius gauge for measuring inner and outer fillets from different parts. One assembly for R 1-10mm, another for R11-30mm. Thanks Jaha for orginal model. STL & 3MF files available.

Downloads
750
Likes
258
Rating
5
P
PrintablesJaha

Radius gauge 11-30mm

Radius gauge for measuring inner and outer radius from objects. Other radius gauges: 1-10mm - https://www.printables.com/model/378121-radius-gauge-1-10mm 31-50mm - https://www.printables.com/model/394652-radius-gauge-31-50mm Assembly: For…

Downloads
747
Likes
115
Rating
4.93
P
PrintablesDockGuy

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…

Downloads
733
Likes
58
Rating
5
P
PrintablesmoWerk

Radius Gauge 1-30mm | -52,8% Minimal Remix

Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…

Downloads
719
Likes
329
Rating
4.94
P
Printablesshawly

Roomba ramp - Ramp for vacuum robots (30mm incl. Fusion360 file)

I converted the Roomba ramp from drdentz for Fusion360 and extended it by 10mm in height for my Bedroom. I also added the F360 file for anyone that wants to modify it. Notes: Printed in 2:33h with a 0.6mm nozzle and a layer height of…

Downloads
672
Likes
24
Rating
5
P
PrintablesTheRealJocki

Stringing Test Tower 30mm

Stringing Test Tower with notches every 5mm. Stringing Test Turm mit Kerben alle 5mm.

Downloads
671
Likes
8
Rating
5
P
PrintablesBadDIY

Super Stong Honey Comb Wall 30mm

Honey Comb Wall I wanted a super sturdy honey comb wall (HCW) with very secure mounts. This HCW can be screwed to a wall and panels can be epoxied together. Built on 30mm hexagons. Mods are screwed together and not press fit. They are…

Downloads
660
Likes
111
Rating
0
P
PrintablesSurfalex2000

Creality K1C Lid Riser 30mm (one Piece)

Creality K1C Lid Riser 30mm (one Piece) with pre made Support for PLA/PETG Support combination. No screws needed to hold the cover, this lid fits perfectly Now the Cable chain doesnt collide with the cover, and the ptfe just just fits…

Downloads
659
Likes
40
Rating
4.5
P
PrintablesRIP_Day

Rod / Pipe Holder 22mm /25mm /30mm

Simple screw mounted holders for pipes/rods. Can be used for filament storage or hanging clothes. The holders can be mounted with 4x 4mm(or 3mm) countersunk screws. They are available in three different sizes: 22mm, 25mm, and 30mm…

Downloads
641
Likes
343
Rating
5
P
PrintablesMaxstupo

Raspberry Pi 30mm Fan Mount

A 30mm fan mount for the Raspberry Pi. No spacers needed. Step file included.

Downloads
640
Likes
57
Rating
5
P
PrintablesPhill Bond

Yeti 330ml Can Spacer

If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…

Downloads
628
Likes
21
Rating
5
P
PrintablesJawaswag

330ml can dispenser

Print the dowels at 40% infill to give them some strength. I used expanding glue, e.g Gorilla Waterproof Glue, in the dowel holes so the assembly Is stiffer. Use cable ties or clamps to keep the parts in place while the glue expands and…

Downloads
620
Likes
82
Rating
5
P
PrintablesJacyk
Downloads
603
Likes
76
Rating
5
P
PrintablesManabun Lab

Raspberry Pi 4 case (40mm or 30mm fan)

I made a small case the same size as the circuit board of raspberry pi4. You can install a heat sink and a 40x40x10mm or 30x30x7mm fan. I am fixing the case with 2Mx8mm screws. Please enjoy! Print Settings Printer Brand: Creality Printer:…

Downloads
581
Likes
41
Rating
4.75
P
PrintablesApplefreak71

Gehrungslade 30mm

Gehrungslade : mit Schlitzen in verschiedenen Winkeln, durch die man das Sägeblatt führt und so beispielsweise Sockel- oder Deckenleisten auf Gehrung schneiden kann. Eine Gehrungslade ist vor allem bei Handsägen für den Gehrungsschnitt…

Downloads
579
Likes
32
Rating
4.8
P
PrintablesKaosuNeko

Cable Chain 15x30mm Flexible Drag

Flexible Drag Cable Chain 15x30mm Includes both end links, closed links and open link. No removable cover. Look forward to the near future. You should probably use supports. This thing repeats the design of the product that can be…

Downloads
572
Likes
66
Rating
4
P
PrintablesRUMcajz

Can Holder Riser + Inserts (12oz + slim 330ml - Scalable)

Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…

Downloads
570
Likes
52
Rating
4.75
P
Printableskiloalpha

Voron Stealthburner Cable Cover with 30mm Fan

This cable cover has the necessary clearance to provide room for connectors and cables without interfering with the fan. Installed on a Stealthburner toolhead with the BTT SB2240 CANBus PCB.

Downloads
568
Likes
92
Rating
2.5
P
PrintablesAndreas Jäde

Fan Adapter from 30mm to 40mm

I'm using this adapter for adding a 40mm fan to the 30mm E3D fan holder. You'll need 4x M3x6 for the 30mm side and 4x M3x16 for the 40mm side (including the fan). Category: 3D Printer Accessories

Downloads
561
Likes
34
Rating
5
P
PrintablesscaryPug

Parametric Raspberry Pi 4B Case (30mm fan) with vertical stand

Based on John_Sinclair's design: https://www.thingiverse.com/thing:3723481 I completely re-made this in fusion360 (file included) using Red Logo's high precision raspberry pi 4b model dummy as template (…

Downloads
557
Likes
60
Rating
4.71
P
PrintablesJason D

Wheelchair 130mm

I designed this on the weekend for someone who has a disability centre. It turned out quite well so I am uploading it here. It is a bit hard to break out of the raft. You can't print it raftless. It can be printed in an Up Mini...just.…

Downloads
547
Likes
49
Rating
4.75
P
PrintablesJimmy21

Backpack Strap Repair Buckle (20mm / 25mm / 30mm)

Is your backpack buckle just one bad day away from total collapse? Don’t wait for disaster to strike mid-hike. Print this repair buckle now and stash it in your survivor kit! Because nothing says “prepared” like fixing your gear on the…

Downloads
518
Likes
290
Rating
5
P
PrintablesMark_Alpha

M4 Standoff Spacer Female-Female Polygon 4-30mm

Collection of M4 female-female self-taping spacers I use for my own projects. ID:3.96mm OD: 8.10mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)

Downloads
500
Likes
55
Rating
5
P
Printablesl1lc4rl0s

M3x30mm

A M3x30mm screw

Downloads
464
Likes
13
Rating
0
P
PrintablesCarl4D

Ender 3 V2 various Riser Feet 30mm

These are meant to put on the oem rubber feet. not to replace them. If u use the Ender 3 V2 Silent Pack then these (basic_Mobo_PSU_cover_30cm_V1.stl) feet, with this cut out at one of the edges, could be Helpful for you. update updated…

Downloads
449
Likes
57
Rating
5
P
PrintablesPrintStructor

Archetype Blackbird Toolhead (WIP) - bambulab hotend with 30mm fan, VZ-hextrudort, Fysetc CNC TAP, custom faceplate, EBB36

This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…

Downloads
449
Likes
117
Rating
0
P
PrintablesBeo666

Monster Energy Dosenverschluss 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
447
Likes
57
Rating
5
P
Printablesmetrodrone

Empire 30mm & 40mm Fan Guards Star Wars Pattern

Fan guard for 30mm & 40mm fans styled after the vent and panel patterns of the Empire in Star Wars.

Downloads
442
Likes
91
Rating
5
P
PrintablesFilarte3D

Raspberry Pi 3B Case for 30x30mm Fan

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.

Downloads
442
Likes
33
Rating
5
P
PrintablesJerrod H

A-10 30mm GAU-8 Gatling Gun Rotating Desk Model / Pen Holder

BRRRRT !! A nearly-1:1 scale model of the A-10 Warthog's legendary 30mm GAU-8 Avenger anti-tank cannon with accurate barrel rifling that freely spins using bearings for rotation. As a bonus, a cam in the base causes pistons to ride up and…

Downloads
442
Likes
84
Rating
4
P
Printablesnickstuffinc

Vase Mode Gift Card Holder 30min last minute print

Here is a Quick last minute gift card holder that is sure to please. I'm calling this an intermediate print as you need to adjust the scale of parts for fitment. My print setting are below. This print is very quick. Print Settings Printed…

Downloads
430
Likes
75
Rating
4.67
P
Printablesyukosteel

ELEGOO Neptune 3 Pro / 4 Pro feet riser - plus 30mm / 40mm / 50mm

ELEGOO Neptune 3 Pro / 4 Pro feet riser - plus 30mm / 40mm / 50mm Easy print, No support, No extra bolts needed. Simply print four risers of desired length - included models are +30mm, +40mm, +50mm (resize by Z in slicer if another custom…

Downloads
428
Likes
82
Rating
5
P
PrintablesOld Curmudgeon

Nespresso Vertuo 230mL Dispenser

This is a remix, but it's been 2 months and I'm now unable to locate the source of the file I downloaded. Apologies to the OC. I'll update the post if I track it down. These holders are big. I can't print larger than the Triple on my…

Downloads
422
Likes
59
Rating
5
P
PrintablesDiego Fernandez

Killflash / Scope Protector 30mm

This is not a fucntional flashkill, it's mean for use in airsoft to protect scopes with an outer diameter of 30mm.

Downloads
418
Likes
25
Rating
5
P
Printablesb-lud

Wall Anchor #7 x ~30mm Screw

Wall Anchor #7 x ~30mm Screw The shaft of the anchor is designed for a ¼" drill bit.

Downloads
414
Likes
53
Rating
5
P
PrintablesSerinFel

Honeycomb Shelf Bracket remix 185 x 130mm

This is a re-scale of Jonathan Levi's remix of the Honeycomb Shelf Brackets to 185 mm x 130mm. I liked the idea of being able to hook something into the honeycomb section of the bracket, or just leave it open. The option is there for…

Downloads
412
Likes
64
Rating
5
P
PrintablesPLAUK

Radius Gauges Inner/Outer 1mm to 30mm

Radius Gauges Inner/Outer 1mm to 30mm Inner and outer radius gauges covering measurements from 1mm to 30mm in 1mm increments. There are a few of these models around, but I wanted something with large text that I could put on a wire loop…

Downloads
407
Likes
203
Rating
5
P
PrintablesCamPrints

60 30ml airbrush paint holder

I was tiered of not being able to see my paints without taking them out of the box. Sure the box keeps them tidy but man o man! So I designed this to to print on my Ender 5 Plus. it fits a 350mm bed. I haven't had a chance to print it yet…

Downloads
405
Likes
46
Rating
0
P
PrintablesDuane

Crochet Hook 30mm

Use 7 pieces of filament about 6-8mm long to make location pins for gluing. Make sure the faces mate flush before gluing with CA. Sides need a bit of smoothing with sand wet sandpaper.

Downloads
399
Likes
79
Rating
4.5
P
PrintablesH3mpp4

30mm caliber ammo

I designed this 30mm autocannon ammunition for props usage to airsoft games. Tip and shell are printed separate of each other so you can add somethign like sand for weight. Fitting of two pieces is really snug. There was a small mistake…

Downloads
392
Likes
62
Rating
5
P
PrintablesThunderbird332

30ml Detergentscoop // 30ml Waschmittel dosier Löffel

I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…

Downloads
383
Likes
15
Rating
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Downloads
375
Likes
45
Rating
5
P
PrintablesMr.melted

tiny whoop 30mm toroidal props 2-6

this is a toroidal prop for tiny whoops like the eachine e010 that use a 30mm prop and 0.5mm motor shaft after testing the hole is to small to be properly printed will update the size soon

Downloads
374
Likes
40
Rating
5
P
Printablesfindtherror

30mm top riser for Kingroon KLP1

30mm riser for the top plate of the Kingroon KLP1. The screws to mount the riser to the frame are hidden inside, a ball head hex driver is needed. STEP files included, feel free to remix edit: added FreeCAD file edit: added 230 version…

Downloads
374
Likes
36
Rating
4.25
P
PrintablesLordDeno

HSW Holder 50x30mm

Honeycomb storage wall holder 50x30mm, to be used with a hallow insert for the honeycomb wall.

Downloads
374
Likes
64
Rating
4.67
P
PrintablesZapador

Tikka T3x CTR Stock Extension (10, 20 & 30mm)

Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…

Downloads
370
Likes
26
Rating
5
P
PrintablesSamhec

30mm M6 bolt and nut for 120mm Desk Fan

Please print the bolt flat side down. It is normal to hear squeaking sound when tightening the nut and bolt. You may need two plier to install it. Layer: 0.10 mm Material: PETG recommended Infill: 100% Perimeters: 4

Downloads
368
Likes
31
Rating
5
P
PrintablesAverageSauce

Clamp for 30mm tubes

This is a simple clamp for a 30mm tube, common measurement in fishing gear. I'ts designed to fit a square tube in the front but it could easily be modified to fit any kind of accessory. Uses an M5 bolt and nut for the fastening mechanism,…

Downloads
368
Likes
74
Rating
5
P
PrintablesAJAJ1992
Downloads
364
Likes
15
Rating
0
P
Printablesn.leinad

Foldable 20,25,30mm Aluminum Profile Connectors

This simple connector can join two 20x20, 25x25, 30x30 mm aluminum (or other) pipe ends together, either simple square pipes or I-type extrusions. It allows for 180° rotation and has a spring tensioned button for locking them in the…

Downloads
363
Likes
144
Rating
0
P
PrintablesKevin

1in/30mm/34mm Scope Rings

Basic picatinny/weaver one piece scope rings for 1in, 30mm, and 34mm tubes. Height options range from 16mm to 38mm as measured from top of rail to center of ring in 1mm increments. Available in text and no-text versions. One 25mm M3 bolt…

Downloads
362
Likes
27
Rating
5
P
PrintablesVoltex

Rush Tank Solo Mount / FPV 20mm to 30mm Raiser

I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on the top side of it. Since I have my TBS Tracer right where my 20x20 Mounting Holes are on my Frame and I didnt want to…

Downloads
360
Likes
23
Rating
0
P
PrintablesHerrFrodo

30mm Scope Picatinny Adapter

I've created this to mount both my lpvo scope and my reddot to my airsoft. It should work with scopes that have a 30mm tube. M5 Screws are used to screw both halves together.

Downloads
358
Likes
77
Rating
5
P
PrintablesMeister Joda

Prusa MINI Rail Spoolholder 130mm

Here is an rail spoolholder for larger rolls! Hier ein angepasster Spulenhalter für größere Rollen! Print instructions 3-4 perimeters + 20% infill for strength.

Downloads
357
Likes
68
Rating
5
P
PrintablesROLS733

30mm Spacer for Pastamatic Filament Spool Winder Spindle

for slim spools like the old Makerbot spools.

Downloads
357
Likes
39
Rating
5
P
Printables3DSpenny

Gluestick Holder 30mm - Gridfinity 1x1x6

A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…

Downloads
352
Likes
43
Rating
4.71
P
PrintablesChrisHerman

Corner Protector (30x30x30mm)

Corner protector for metal containers, things on coasters, taking the blow off sharp corners on furniture, etc. 30mm x 30mm x 30mm with 5mm thick sides Category: Household

Downloads
348
Likes
30
Rating
4.67
P
Printablesrobots914

Orange Pi Zero 3 case + 30mm fan

This is a modified version of TheParanoidEngineer's Orange Pi Zero 3 case. This version is taller and incorporates a 30mm fan, with space for heat sinks. This is derived from the Standard Hex version with external antenna and access to…

Downloads
346
Likes
34
Rating
5
P
PrintablesIsaac K.

PET Bottle Finish(Thread) Size Converter (30mm to 28mm)

How it was born One day, I'm looking around the Printables world. And I found a fun and practical model: https://www.printables.com/model/89488-small-garden-care-is-really-fun I printed it and tried to connect with 2L size of water…

Downloads
340
Likes
30
Rating
5
P
PrintablesToTo

Radiator cap (TRV) - 30mm/1.5mm thread

Just a simple radiator cap (TRV) - 30mm/1.5mm thread

Downloads
340
Likes
14
Rating
5
P
PrintablesCrambambuli

Ruler (max 30mm) gauge postioning and angle block

Found this nice tool on AliExpress. https://a.aliexpress.com/_EQpYTXP ..and made a less precise but better plastic version of it. If you like the tool and want more precision .. buy it. Versions of this tool: Luxus Versions with magnet…

Downloads
337
Likes
110
Rating
4.67