Search results: 350mm

Voron 2.4 350mm Rear Skirts with Hex Infill

A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.

350mm Voron skirt mod for 40mm extrusion

This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.

LED Strip Diffuser For 350mm

I loved this design so printed it out but found my LEDS were too bright THIS IS ONLY FOR THE 350MM VERSION

RevoPoint Dual Axis Turntable - 350mm extension plate with vertical scanning hips

I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…

Wheel_Stand_P1_350mm

350mm back skirt for Trident with keystones

I liked the keystone, but it was slightly too short for my Trident. Lazily extended in Blender by 40mm on each side.

E3CNC Extended XY Plates for 350mm 4040 profile

This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…

Voron 350mm LED COB Light Strip Mount

Voron 350mm LED COB Light Strip Mount

Voron 350mm insulation Jacket

Proceed with caution! This is not a final or optimized file so expect some tolerance issue, it's a step file so mod away! The current file supports adding 3mm foam strips to the frame to provide a cushion between the plastic and frame.…

Bed Leveling Test - 350mm X 350mm Bed

A perimeter with bisecting diagonal crosses to test the level of the bed around the perimeter and across the middle.

VORON 2.4 350mm Bottom Air Shroud

Using this air shroud directs the airflow better, and I can also lower the skirt fans to 40% while still being just as effective but much quieter. Regarding temperatures, they've dropped about 10°C on the BTT Pi and the Octopus MCU. Also,…

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Filament Spulenhalter für 350mm Spulen

Filament Spulenhalter für 350mm Spulen der neben den Drucker gestellt werden kann. Die Spulen können eine Breite von 110mm (120mm sind noch problemlos möglich) haben. Aufgrund der mittigen Lagerung der Spule wird diese gleichmäßig…

The 100 extended v1.1 Feet for 350mm Rods

When I built my The 100 Extended I couldn't find 330mm rods only 300 or 350 so I mad holes in the feet so I could use 350mm rods Please leave a like if you like them or comment if there is a problem so I can fix it!

Voron 2.4 Draftshift/Toolchanger 350mm Build Extended Full Skirt Bottom Frame

This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions. The Front Motors Are Extendet For 2040 Extrusions. Frame Must be Extendet in Y about 100mm Front Motors needs to…

Revopoint Miraco Turntable T-125 extension 350mm /Drehtellererweiterung auf 350mm

Adapter for extending the Revopoint Miraco T-125 turntable to 350mm. 3D Markers with a diameter of 7mm and a center marking are integrated on the plate (multicord print wit Prusa XL).Adapter with thread for screwing onto a tripod to use…

350mm (13.78") Guitar Radius Gauge

A little radius gauge for 350mm radius (13.78") guitars. Can be used to check the neck's radius but also for your string action setup.

FT EMS Voron 2.4 350mm (LDO Laser Cut)

INTRODUCTION Not a fan of DIN rails and VHB tape - Sorry Voron Design team. You are in the right place when it comes to Electronics Management Systems aka FT EMS. This is our single piece acrylic laser cut FT EMS frame that fits onto the…

Voron 2.4 350mm Front Skirt with Power Switch

I wanted to add a power button to the front of my Voron 2.4 350x350 since the printer is so large and it is hard to reach to the back. I kept my original power switch in the back and changed the stock skirt to have a space for either a ½"…

3 Switch Skirt - Voron 2.4 350mm

This is a modified skirt where you can add three power buttons. You can have separate control of the printer power, pi power and LED. I used 10 amp ½ inch x ¾ inch switches. Soon I will publish the 2 switch and single switch version

Voron 2.4 350mm Skirt Power Switch Mod

The back power switch is hard to reach. This uses a .5" x .75" rocker on off switch

Voron 2.4 exhaust CAN cable route for 300mm and 350mm

Works with either the original or my modified mount to work with stock panels Print 2 of the correct length for your printer, models are pre-oriented

ERCF V2 Top Mount 500mm Extrusion for Voron 2.4 350mm

This mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version. The extrusion that I…

PCB Hotkey Buttons Voron Fystec Flat Mesh Skirt 350mm (development)

Warning this has not yet been tested. Printed, but not tested. Currently developing the idea. Appreciate any input. Print with honeycomb infill, 0 top and bottom layers.

Flat Mesh Front Skirts - Voron 2.4 - 350mm (Cura Ready)

I remade the amazing front skirt design by Thejiral so it has the hexagonal mesh added into the design for those of us that only use Cura. (Mainly because I'd rather challenge myself to make something work in Cura versus actually learning…

Clicky-Clack 350mm Thicc skirts With Mesh

Will Require a Multi-Color printer or 4 Manual Filament changes as you see the side of the skirts so you will definitely see the color change line if you do it the change at layer line. In Orca you will want to go to the object list and…

Voron 2.4 350mm Rear Skirt With Cable Cutout

Simple remix of the rear center skirt for the Voron 2.4 350. It has a hex pattern cutout to save on plastic. You can run your filament sensor wire or umbilical cable through it.

Voron 2.4 350mm Rear Skirts with Hex Infill

A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.

Flat Mesh Rear Skirts -Voron 2.4 - 350mm (Cura Ready)

A remix of Thejiral's amazing Voron flat mesh skirts, but redone for Cura users, the mesh is built into the model. Various versions of the backplates, power, blank, and two types of keystone insert parts, as I found the normal one didn't…

Prusa XL 350mm plate jig

PEY plates are perfect for printing TPU. The jig can be used to place a 350x350 mm plate, like this one from aliexpress: https://s.click.aliexpress.com/e/_on2kPGH Model includes a pin to secure the jig while placing the plate.

Troodon 2.0 Pro 350MM Slide Off Panel Mod

Rails that the panel slides into, so you don't have to take off all the screws. Side Panels: Use M3x6 to attach the rails and M3x12 for the top center screw that retains the panel. Botton Panel: Reuses all but one of the stock panel…

Voron V2.4 350mm Hex Mesh Rear Skirts Filtered Inlet

Mesh skirts i made for my 350mm 2.4. Couldnt find one with a filtered inlet

Voron 350mm V2.4 Braug Skirts

Braug Facade Skirts for V2.4 350mm.

Panels for the BeamCaseSFF 350mm

These are my panels for the BeamCaseSFF extended to 350mm because that is the length of my BeamCaseSFF (using 320mm aluminum x profile beams). these are inspired of some itx cases that exist on the market (ex: nanoq). Notes: -I use the…

Sony 70-350mm Lens Collar

IMPORTANT!! PRINT AND USE AT YOUR OWN RISK!! Please understand that this is a cheap piece of plastic that will be used to hold at least 1k worth of equipment. Use at your own risk. I saw that lens collars for this specific lens are about…

Voron V2.4 350mm Rear Skirt with Keystone

Voron V2.4 350mm rear skirt with 6 keystone slots.

Flat Mesh Top Hat for 350mm Voron 2.4

This top hat mod for a Voron 2.4 350mm adds 117mm to the height of the Voron, which is great for using an umbilical instead of the standard cable chain. It also allows for moving a screen to the top, along with the Pi., there's also a…

Voron 2.4 350mm Fridge Light Switch

Just like a real fridge, this modified skirt and trigger block allows you to add a switch to the fridge door that turns on/off your enclosure lighting when the door is opened/closed. The goal with this mod was to keep it as subtle as…

Ultra Articulated snake - new design 200mm and 350mm lenght

Now - here the design of my articulated snake, which is not that spiky anymore and in common sizes for fast prints. On my Elegoo Neptune 4+ the 200mm snake took 1h to print, the 350mm snake 2h. The joints are the improved one from the…

Gridfinity Refined Bolt Cutter Ace 350mm (14) 1x4 + 1x5 (set)

I have a series of tools that are on the larger side (1x9 - split by 1x4 and 1x5 sets) (see collection here and here ) and this is for a pair of 14" (350mm) bolt cutters.

Beefy Wire Duct for Voron 350mm (Ryandam Remix)

These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…

Voron 2.4r2 350mm Fan controller front skirt

i tweaked the front skirt to house a couple of fan controllers Category: 3D Printer Parts

Voron 2.4r2 350mm dual LED light control panel

I also tweaked this side to add 12mm click buttons for light control Category: 3D Printer Parts

Build plate holder 355mm (+350mm), SV08 / Voron (Wall mount option)

This is remixe of @addohm_141025 's Wall mounted build plate holder. I modified it for 355mm and 350mm build plates. There are two versions. V2 have more stability but needs some more filament. CAD at onshape…

Gladiator NXT Desk Clamp (350mm bed needed)

Print in something stiff. I printed mine in ABS-GF25 but I suspect ABS/ASA or even PLA will be fine. The clamp uses a M5 heat insert on the inside of the clamp jaw. Use a bolt to pull the heat insert back down into the hole (You can't use…

1050x350mm Ball Screw Printer

I'm working on a DIY 3D printer which uses ball screws for all axis, XYZ. With a large build volume of 1050x350x350mm. Early design stages, quoting custom beds and heaters from suppliers. Will continue to update this project as it…

Desk Drawer 350mm x 350mm with Gridfinity

Orignal model rescaled to 350mm x 350mm. Used perplexinglabs gridfinity generator to create a base plate Merged and sliced.

350mm front skirts for Siboor Voron Trident

These are front skirts to use on a 350mm Siboor Voron Trident and ChriL's screen mount. This is to be used with the Clicky Clack door as well. Follow instruction on livinhack's github to print correctly. ChriL's screen Mount:…

voron v2.4 350mm insulated enclosure panel clips

i got tired of the 360 degree view of my abs parts warping off my bed due to lower than optimal chamber temps. in my room my chamber temps topped out at 58C. larger abs prints warped off the bed or warped the spring steel print surface…

Cryogrip 350mmx350mm plate for prusa xl

I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer go to printers tab General section Bed shape click set load xl.svg (comes from the prusa-slicer project and…

Voron 350mm Canopy side handles - spool holder

The procedure is the same as for the original model. (https://www.printables.com/model/824550-voron-24-trident-350mm-canopy-side-handles) BOM (per side): Canopy sides: 2x M3x8 SHCS (I choose to use low profile ones) 2x M3 Roll-in T-nut…

8 Lane ERCF V2 Mount for Voron 2.4 350mm

I wanted a way to mount my ERCF to the top of my V2.4 without buying any aluminum extrusion or removing my side handles

Lid riser block / Canopy for Troodon 2.0 Pro 350mm printer

In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…

Lid riser block / Canopy for Troodon 2.0 Pro 350mm printer

In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…

350mm Voron skirt mod for 40mm extrusion

This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.

Modular Ceiling Swivel Base – Adjustable & Expandable Mount Ø90-350mm

This modular swivel base is a versatile mounting system designed for attaching devices or structures to ceilings or overhead surfaces. It consists of two interlocking halves: Base Dome: fixed to the ceiling with countersunk screws Swivel…

Voron Trident 350mm (Assembly STEP)

I was very surprised when I couldn’t find a CAD assembly of the Voron Trident 3D printer. For the convenience of customizing my printer, I prepared an assembly in STEP format based on the files from the GitHub repository:…

350mm V-Slot Covers for 20 and 40mm profiles

made them to hide the cables on my ProForge printer. I printed with 0.5mm width

Voron 2.4 poop tray, 350mm

Voron 2.4 poop tray, 350mm held with 6x3 magnets great for putting the purge lines in

Voron 2.4 (350mm) Skirt Mod mit Hutschienenhalterung / DIN Rail Mount Add-on

🇩🇪 Voron 2.4 Skirt Mod (350mm) – mit Hutschienen-Halterung Dieser Skirt-Mod wurde speziell für den Voron 2.4 in der 350mm-Variante entwickelt. Der seitlich hintere Skirt-Abschnitt wurde so angepasst, dass er ein Hutschienengerät (z. B.…

Voron 2.4 350mm flex plate guide

I use four m3 x 8mm and four m3 hammerhead t nuts for securing it to the rails behind the build plate.

Voron LED diffuser 350mm

Remix for 350mm for LED Strip Holder for Voron 2.4 by FunFunBoy

Voron 2.4 (350mm) skirt mesh with power outlet

I wanted a panel mount C13 port but with the mesh added. I did not find anything like this, so I made this one from the STL in the original upload. Step file was generated from the STL then I added the hexagon mesh. The print can be…

V2.4 Revo Nozzle Holder skirt 350mm

Remix to fit a 350mm 2.4 r2 No Supports required Bill Of Materials 2x 6mm x 3mm Round Magnet 5x M3 Heat-set insert 2x M3x8 SHCS Instructions Print skirt and nozzle holder parts (the skirt piece will be placed in the left front position of…

Build Plate Caddy for Voron 350mm

Extended the original caddy for larger build plates (fits up to 355 mm). Also extended the sides of the left/right runners so that smaller build plates may fit and caddy can be used horizontally.

Voron 2.4 350mm Onn Camera Mount

This camera mount was designed around the Onn Webcam. It will require disassembly of the original camera mount. Remove the rubber pad and you will find the screws to take apart. This mount will use the screw that directly mount the camera…

ERCF Top Mount - Remix for 350mm Voron

Redesigned for 500mm 2020 profile on voron 2.4 - more robust construction + mounting jig

Voron 2.4/Trident TPU Twist-Lock Deck Support (LDO 350mm)

This is a support component for the bottom panel (deck) of Voron 2.4 or Trident printers using 2020 aluminum extrusions. It is designed specifically for 3mm thick panels , such as those provided in LDO 350mm kits . Technical Details:…

LED Strip Diffuser For 350mm

I loved this design so printed it out but found my LEDS were too bright THIS IS ONLY FOR THE 350MM VERSION

RevoPoint Dual Axis Turntable - 350mm extension plate with vertical scanning hips

I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…

Wheel_Stand_P1_350mm

350mm back skirt for Trident with keystones

I liked the keystone, but it was slightly too short for my Trident. Lazily extended in Blender by 40mm on each side.

E3CNC Extended XY Plates for 350mm 4040 profile

This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…

Voron 350mm LED COB Light Strip Mount

Voron 350mm LED COB Light Strip Mount

Voron 2.4 350mm – Thicc Skirts Electronics Cover Clip Upgrade

This upgrade introduces the following improvements: Insert holes for M3 heatset inserts in both left and right Thicc Skirts (2 inserts per skirt, total 4), Enlarged clips to fill the 20 mm gap, allowing the lower electronics cover to be…

Voron 350mm insulation Jacket

Proceed with caution! This is not a final or optimized file so expect some tolerance issue, it's a step file so mod away! The current file supports adding 3mm foam strips to the frame to provide a cushion between the plastic and frame.…

Bed Leveling Test - 350mm X 350mm Bed

A perimeter with bisecting diagonal crosses to test the level of the bed around the perimeter and across the middle.

VORON 2.4 350mm Bottom Air Shroud

Using this air shroud directs the airflow better, and I can also lower the skirt fans to 40% while still being just as effective but much quieter. Regarding temperatures, they've dropped about 10°C on the BTT Pi and the Octopus MCU. Also,…

Voron 2.4 (350mm) Rear skirt with power outlet

Adaption of the left-rear skirt, to include a female C13/C14 power connector to power other devices. I made it because I want to power my Quattrobox MMU unit with the inlet power from my Voron2.4 Takes standard panel mount C13 port like…

Voron Top Hat 350mm Frame 200mm tall

Print 4x of each file for a 350mm square Voron Frame, should fit 2.4 and Trident 350mm frames.

Voron 2.4 Print bed spacer for 350mm build jig

this is just a tool i printed to ensure i was getting the correct spacing on my print bed for the voron 2.4 350 mm build

Voron 350mm +110mm Tall Top Hat

Extra Tall Modified Top Hat - 350mm Voron 2.4 and Trident This mod increases Z clearance height by 110mm and improves cable management (Can Bus / Umbilical style) by raising the top. Requires re-routed cabling and filament path (not…

VORON - USB Keystone 350mm Skirt

This is a remix of https://www.printables.com/model/192455-voron-usb-keystone-delock for 350mm build. This is for right side of the front skirt. You may mirror it to use on the left side of the front skirt.

Bear Y axys - linear Rail - 350mm or 365mm - MGN12

Original files for 365mm here: https://www.thingiverse.com/thing:4095548 As the original ones, it pass the Y test from prusa. I remixed this model to make it compatible with 350mm Linear Rail. Working perfect :)

Voron 2.4 350mm skirt a power switch mod

Voron 2.4 350 mm front right skirt modified with a hole for a power switch Hole size: 22x30mm

Revo Nozzle Bay 01 and 02 for Voron 2.4 350mm (Remix)

Inspired by Several e3D Revo holders while looking for a solution for my Voron v2.4 350mm I wanted to have 2 bays (right and left) and wanted them labeled to be consistent with the "aesthetic" of my industrial themed (yellow, Black,…

Side main switch for Voron 2.4 R2 350mm / 300mm

Side skirt for Voron 2.4 R2 350mm version with main switch. Second model is original back skirt with only AC input and covered hole of the original main switch. For those who has already printed back skirt, you can use a Switch cover so…

Table / Shelf Sheetholder 350mm

Simple sheetholder for two sheets to put under a table or shelf. Designed for 2.5-3mm screws, mini mum length 8mm. Print on the long thin side. Please post a make and leave a rating if you print it. :)

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Bling Box - Sealed Gift Box (700x350mm approximately 27.5x13.75 inches)

This 3D print model is a unique and functional gift idea, designed to put a letter or a banknote. The box is made of PLA material and the front of the box is designed with a lattice-like structure, allowing a glimpse of the inside…

YYACF (Yes, Yet Another Co-Filament) Co-Filament Model for 350mm and Larger Beds

Before anyone asks, I made this in Blender rather than reworking someone else's project. Blender makes creating something like this a 5 minute exercise but it took me a bit longer because I'm still teaching myself blender. To print this I…

Voron 2.4 Skirts with Hex infill. 250, 300 and 350mm sizes.

I remixed the default Voron 2.4 skirts, adding a hex pattern inside the original hex. I also remixed the fan mount skirt, adding the same hex pattern and reworking it to be mounted backwards. The backwards mounting was necessary to allow…

Ender 3 LED Bar Holder (LED Space 350mm x 13mm)

Ender 3 LED Bar Holder with 350mm x 13mm LED Space inside! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Filament: TIANSE PLA Black Notes: Chose BRIM instead of RIFT for…

nozzle-scrubber-with-a-large-bucket-for-voron-24-350mm

Liked the big bucket but needed it to fit my 350 model.

Insert Friendly 350mm Voron 2.4 Front Skirt

Remixed the 350mm left and right skirt to include a small cutout around the bottom row of hex holes so that insertables such as nozzle holders and mechanical buttons would fit better.

XL Moon Lamp 350mm / 13.7" with IKEA fittings for PrusaXL

[edit - the current gcode file prints a model with fairly substantial walls. This makes for a robust moon, but is not ideal for lighting purposes. Currently working on slimming down via the model creation process.] I could not find a moon…

Filament Retract Bank remix for Voron 2.4 350mm

Main changes: ECAS version only Buffers around 1000mm of filament. The M5 holes line up with the top and bottom 2020 extrusion on 350mm Voron. All captive nuts changed to 4mm M3 heat inserts. I also modified a lot of the holes on the…

Voron 350mm Buildplate Storage Holder

New version for up to four 350mm buildplates, plus added Voron logo ;) Accordong to Voron Design licensing, this is also GNU GPL 2.0

Voron 2.4 (350mm) skirt with power outlet

Adaption of the left-rear skirt, to include a female C13/C14 power connector to power other devices. I have made it because I want to power on my separate air filter unit with the SSR within the Voron machine. This makes it possible to…

Tall Planter (REQUIRES LARGE BUILD AREA minimum 350mm in the Z axis)

I created this planter for my wife's hanging succulents. It does require a large build area in the Z axis, about 6.5 inches in the X and Y. about 15 inches in Z axis. I printer this with 15 % infill on my Anycubic Kobra Max. with a .4…