80 models
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
Original Elegoo tool holder V2
The filament reel guide designed for Elegoo Neptune 4/4pro printer to guide filament from dry box to printer head smoothly. the reel should be duplicated as 2 not support needed while printing you need extra 1 M5*15 and 2 M3*20 screws to…
Clamps for the Neptune4/PRO cable chain with the innermost beaks removed
All you need are this 3 printed parts, one nut M6, one disc, one screw M6 x 50.
EDIT: I'd shrink the spine/chain connector a bit to make it more snug as it has more torsion. I reprinted mine at 98% I've unified some mods, here's more details (tested for Neptune 4/Pro, needs testing for the Plus/Max): basing it off of…
Webcam Halterung für die beispielsweise hier gezeigte Rollei R-Cam 100, die übrigens 100% kompatibel mit fluidd ist und problemlos auf Full-HD läuft. Optimal ausgerichtet zur Düse mit genauer Verfolgung schon von der ersten Schicht. Auch…
I, as well as other N4/4Pro users, had trouble getting a satisfactory fitment with the original design by @bazzzzzzz_230758. I referenced the original's geometry while building my own model in Fusion based off of the measurements of my…
The wireless chargers on many new vehicles don't work for sh!t unless the coils are aligned properly. The 2023+ 3rd gen GMC Canyon/Chevy Colorado chargers are no exception. This is a custom spacer I drew up to fit in the tray and center…
Materials required 1 -- 608-2RS Ball bearings (skateboard double rubber sealed 8mm X 22mm X 7mm) Bearing I used 1 -- M5x25mm screw 2 --washers 1 -- M5 nut To attach to rail 2 -- M5 X 10mm screws 2 -- T-nuts
Pedana per monopattino Kugoo M4pro con triplice funzione di poggia piede, maniglia per sollevare il monopattino e contenitore per l'allarme. Doppio punto di fissaggio; Alla pedana ed agli ammortizzatori. Da stampare in PETG - ABS - ASA…
I would like to print the cable chain from Simin03 for my N4Pro, but I don't like the z-mount with all “Elegoo” print on allside, so I remake the z-mount from scratch based on official Elegoo Tool Holder. I use my remake z-mount .step…
This is a holder for a webcam directly in front of the printer. In my opinion the best perspective for surveillance or time-lapse recordings. The holder is perfectly designed around the rubber feet of the printer. Stable even over the…
For whom is this for? Its for Madmans thinking one day the N4 could be an LH-Stinger - it cant - but we try anyways! This Mod is for N4 or 4Pro owners that seek for more power overall on the Y Axis which means higher recommended accel,…
Alternative Z Mount for Elegoo Neptune 4/4PRO Cable Chain https://www.printables.com/de/model/581649-elegoo-neptune-44pro-cable-chain. Simply added two 90-degree rotations and some decor. Support needed! 😜 Enjoy my model? Show some kitty…
Quick and easy HULA Anti Vibration Feet Adapter for Elegoo Neptune 4/4Pro. Simply remove the original foot of the Elegoo Neptune 4/4Pro and mount the adapter foot. Afterwards, the modified center core can be connected to the rest of the…
Good morning, Welcome to my profile, full of models and miniatures :-) I have for you covers for Iphone 14 / 14 Pro / 14 Pro Max. They are beautiful and practical. At first glance they will amaze you with their design. Printed without…
This is a case to cover the sides and back of the Zeeweii DSO154Pro portable oscilloscope. It's meant to be pressure-fit, so you may need to adjust dimensions by 0.1 or 0.2mm depending on your printer's tolerances. There's also a small…
Made this as a simple phone holder that i taped to the wall in my shower so i can use my phone but not have to stress during the print and have a very very simple print any remixes are welcome please download and also check out my youtube…
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
Print details: I orient the model such that the pen hole is vertical and the numbers are towards the bottom. Printed with PLA, 0.2mm, 2 walls, and 15% grid infill - takes approximately 70 min and 29g of filament I used supports to ensure…
Remix of side-feed filament guide using SilencedFrost's UBBI
A case for the DSO154Pro oscilloscope which removes the base to have a salvaged one use e-cig circular battery (~ 12.9mm) to be secured at the bottom. It reuse the original screws. Also added a bit of a lip to protect the screen.
For whom is this for? N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor. What to…
I've made some small changes for myself.
This mod and the associated printfiles will give a quick explaination on how and why to install Stepper Dampers to Neptune 4 Series Printers. Included Printfiles are to offset the y Limit switch on Neptune 4 and 4pro - otherwise the bed…
I adjusted the existing model to fit an iPhone 14 Pro (without case!). It was an quick and dirty adjustment, but it does it's job to fit the bigger camera bump.
Version of 2022 Updates: More strong; Small improvements; Back plate without screws; Can be placed on the right or left side of the printer; Version compatible with insert nuts(I used M3x3x4.2mm insert nuts); Version without Reset button;…
print on the largest flat part, cable chain adaptor up will need 2 - M3 x 16 button head screws to mount. Mount to the wheels side of the carriage, where the old take off mounted. 2 versions, depending on how you want to clear your chain.…
Still in progress !! Works with a few tweaks. Conversion from the factory rail with rollers to a 300mm KGN15 rail with MGN15H carriage. V3: Same issues as V2. Added spacer for printhead (Druk X 5) Best to print in TPU. Small tweaks to all…
This is a replacement air vent for GMC Savana / Chevy Express that incorporates a cradle which will allow you to mount an iPhone 14 Pro in an Otterbox case at the air vent on the right hand side of the steering wheel. A lightning charger…
.3mf file included for print orientation and support requirements. Recommend using a filament with some heat resistance like PETG due to the proximity to the heated bed and nozzle. Like any probe mount you don't want this to droop or…
Une boite de transport pour votre Pavo 20 Pro, monté avec un DJI O4 (Pro bien entendu…) Peut contenir : 1 Pavo 20 Pro, avec son O4 et ses antennes stock (qui prennent une place…) 6 LiPo 3S (4 fines type Lava, 2 épaisses style DogCom) 1…
requires 4 m3 heated inserts (2 to mount the kubsa and 2 to mount it to the bed) make sure to print in petg or better make sure you set this as the y axis inputshaper I will update if the orentation of the kubsa ends up causing errors
I added an organic support at the middle and at the end of the screw hole. I used a brim for stability to hold the part to the bed. This will work for both X4 pro and plus.
Loved the original raiser(ruler) but I like my keyboard higher, so there is the thing. Category: DIY
Shorter version of https://www.printables.com/model/679978-mintion-beagle-cam-v2-camera-mount-elegoo-neptune
Крепление датчика нити позволяет закрепить его в обычном месте, сохраняя при этом его мобильность. Дополнительно вам понадобится винт M3 или стандартный винт.
This adapter is an easy for print (except overhangs on mounts) model that allows you to mount Logitech C525 webcam on the left cover of X gantry. With the GoPro type mount, you can also easily create and attach other mounts as well. I'm…
Update: 29/01/2023 Updated carriage to improve X size, now 220mm. Bed size is: 220x215 Bloutch offset is: x_offset: 16, y_offset: 4 ←--------------------------------------------------------→ Help for assembly…
you need: 1_ m3x16 1_ pc4-m10 print settings: infill: 25% or more You can print it in pla, but abs or petg is more durable
My design is to move the controller touchscreen onto my desk. I am left handed. My printer is on my right. It is nice and stable and add a couple of nuts to the supplied bolts and there we go. the bolts can actually reverse to maybe look…
Original Printable BOM and instructions apply Motor screws 1x M3x8mm replaces 1x M3x5mm The 3x M3x40 are used. Part B was modified to recess them deeper in the Part Requirements Motor cannot be longer then 48mm shaft needs to have a…
Disclaimer untested Mod. Dont have the carriage myself. Cant build it to check if this is even worth it. There is no install instructions or anything also because of that fact. Since i dont know when or if i will upgrade to it i release…
Rotating filament spool holder for Neptune 4/4pro printer. Suitable for spools with inner bore diameter 35-75 mm and width up to 85 mm. To make it you need: bearing 608 - 2 pcs, nuts m8 - 3 pcs, washer m8 - 2 pcs, stud m8 135 mm long.…
I designed and made this filament dryer tray for my new comgrow dryer. it uses the existing screw mounts in the top bar as a replacement for the hanger. I put a hole in the front corner to fix the filament detector, however i had to make…
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing…
I didn't find any models here with support for both Mellow Fly ADXL345 and A1 nozzle wiper, so I made one. The model is a remix of @Joushou's bed plate aligner. Model modified in Autodesk Fusion. When printing , it does need support just…
I have a project in which I try to increase the flow rate of plastic on an Elegoo Neptune 4 Pro and I couldn't find the heat block anywhere in the step or stl format, so I measured the block bought as a spare. I hope it is useful to you.…
Elegoo Neptune 4 Pro Z-Axis Belt Tensioner Tired of subtle Z-banding or artifacts ruining your outer walls? This simple, drop-in upgrade ensures your Z-axis belts stay perfectly aligned, eliminating slack and noticeably improving overall…
Webcam mount for 3d printer Elegoo Neptune 4Pro
Print Settings Printer Brand: Prusa Printer: MK3S+ Rafts: No Supports: No Infill: 15%
m3 screw for fixing the filament sensor, analog of the standard screw (original lost). Print with 0.10-0.16 layer, 100% fill, apply XY compensation for accurate sizing. Lasts about 5 screws, may need a new one.
Assembly: desolder connector from generic limit switch (https://www.aliexpress.com/item/1005004881361555.html) narrow bent pins solder from underneath (maintain the position of the cap!) screw in… BOM is the same like Lamarc's, only…
I modified the modell from @Minkas_ to fit on the Elegoo Neptune 4 and 4Pro. I would recommend printing it on the front side with support. To atach them you can use the existing srews.
fácil armado y fácil funcionamiento, capacitad máxima de 2 carretes de filamentos
Fichier expérimental pas encore testé Remix d'un fichier de "callmelue" j'attends la publication de son modèle pour le mettre en remix
Cap for https://www.thingiverse.com/thing:4166253 Prevents filament from slipping off the guide.
A mount designed that will fit over your vehicle visor in the down position in the landscape orientation. If you spend a lot of time in your vehicle idle like I do, then having your phone at eyelevel while trying to watch a video, then…
Enter the code in the section dedicated to the machine's initial g-code ;ELEGOO NEPTUNE 4 PRO M220 S100 ;Set the feed speed to 100% M221 S100 ;Set the flow rate to 100% M104 S140 ; heat the nozzle to 140°C without waiting M140…
ADVENTURER 4PRO TOOLS - SENCILLO NO NECESITA SOPORTES
O4pro protective case for JENO 3.5"
protection de lipo pour jeno 3.5 pour O4pro contenant l espace pour un mini buzzer vifly et un micor GPS de speedybee
JENO 3.5# O4pro side protection en PETG
These lightweight snap-on motor caps are designed to fit DJI Phantom 3 and DJI Phantom 4 Pro motors securely without the need for tools. They're quick to install and remove, helping keep your motors clean when your drone isn't flying.…
I made the print using PETG and 0.4 nozzle Either screw in the holder first or clip in the charger and screw in the holder into the wall (the charger has a good hole). Designed the gap between the charger and the wall, because I assume…
requires 4 m3 heated inserts (2 to mount the kubsa and 2 to mount it to the bed) make sure to print in petg or better make sure you set this as the y axis inputshaper I will update if the orentation of the kubsa ends up causing errors
For whom is this for? N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor. What to…
Fichier expérimental pas encore testé Remix d'un fichier de "callmelue" j'attends la publication de son modèle pour le mettre en remix
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
Original Printable BOM and instructions apply Motor screws 1x M3x8mm replaces 1x M3x5mm The 3x M3x40 are used. Part B was modified to recess them deeper in the Part Requirements Motor cannot be longer then 48mm shaft needs to have a…
I didn't find any models here with support for both Mellow Fly ADXL345 and A1 nozzle wiper, so I made one. The model is a remix of @Joushou's bed plate aligner. Model modified in Autodesk Fusion. When printing , it does need support just…
Enter the code in the section dedicated to the machine's initial g-code ;ELEGOO NEPTUNE 4 PRO M220 S100 ;Set the feed speed to 100% M221 S100 ;Set the flow rate to 100% M104 S140 ; heat the nozzle to 140°C without waiting M140…
I made the print using PETG and 0.4 nozzle Either screw in the holder first or clip in the charger and screw in the holder into the wall (the charger has a good hole). Designed the gap between the charger and the wall, because I assume…
Este diseño es un soporte para el V6 hot-end de E3D. Es más fuerte y más rígido que algunos de los diseños que se pueden encontrar. Este soporte ha sido modificado para adaptar cualquier funcionalidad actual y futura. Lo mínimo que…
After making the DSO154 Pro oscilloscope case made by Stefan https://www.printables.com/model/523611-dso154pro-oscilloscope-case I decided to make a lid to protect the screen, this is the outcome, created using Fusion360, the short sides…
![[Elegoo Neptune 4/4PRO] Cable Chain Z mount - no glue - for extruder spine](https://media.printables.com/media/prints/809263/images/6258614_cfee5d9a-d7ca-4179-af5c-a94e22e9d781_63b7f118-3f57-44b0-84bb-905b49852660/orca-slicer_hi8cfe8qse.png)
