Counting matching models…
I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned…
I used .2mm layer height, .4mm nozzle, and 20% infill. No glue was needed for the male connectors but could use a little hot glue or gorilla glue on the female connectors. Tested on MK2.5S and Ender3 Pro.
This is a 3/8th's (actual internal diameter is .380") 4 way connector that was designed for for tractor supply 4' fiberglass rods in order to hold the elements to the main beam (all made out of the rods).
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
This car chassis allows you to replace a broken acrylic chassis or have fun upgrading your current kit to a fun buggy-style model. This model has been designed to print with minimal support (only the front face which holds the ultrasonic…
Goals of this project: Making the rc car more accessible by using widely available parts. The original differentials were hard to get, and although alternatives exist, they weren't easy to find. The Schumacher belts were hard to get were…
************************************************************************************************* Dec 10-2023 Thumper axles have been updated for strength. The assembly videos for the old axles are still available in the description of…
For the most up-to-date parts, visit the GitHub project page . A 3D-printed, 4WD RC drift car. 1:28 scale, fits 90mm (M) wheelbase MINI-Z shells. Test drive: https://youtu.be/90DoZpYbfy4 U-joint closeup: https://youtu.be/g_EzM2HMQvg Note:…
20L Jerry Can
I have a tripod with the Velbon QB-4W Quick Release Plate. So I remixed these two components together to have a cell phone mount for my Google Pixel 2. A bit overkill for what I needed, but a fun little project. Supports are not required…
1/10 電動ラジコンの4WDツーリングカーシャーシ(ホイールベース257mm)です。動画の中の黒と白のツートンカラーのマシンです。 駆動系はTT-02を基本にしており、デフギアやカップ類の一部はタミヤのTT-01/02と互換性があります。 相変わらず必要パーツリスト等や説明が何もなく、STEPファイルぶん投げるだけのスタイルです、すんません。 組立の概要は下記のツイートが参考になると思います。…
Electrical connection box for 4 Wago connectors of the 221x314 series To finish the build you will need 1x plastic box 4x Wago connectors 4x step nipples Dimensions: 70x70x34 [mm] This box uses a click system to attach WAGO connectors.…
A set of printed components to build 2WD or 4WD robots that can be controlled and managed by any of the Raspberry Pi single board computers (SBCs), a Raspberry Pi Pico microcontroller or an ESP32 microcontroller - where the use of mecanum…
I did compete with this robot in four full combat competitions so far. Attesa performed (imo) really well and was able to use the shield and the spikes effectively. The speed, combined with the grippy tires, makes driving a lot of fun.…
1:1 Model of a 24Wh battery for ThinkPad T470/80 T570/80 and T25. It locks in place securely, the mechanism on the left latch works as intended. I made it because I mostly use my laptop on a charger/docking station but didn't want a…
All 3d files should be free. Enjoy this 2 door mount for the Mojave onto a VRD. Print with alot of walls for strength if needed.
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
Mount yer K10 chevy from rc4wd to a vs410 chassis from Vanquish. (also works for Toyota xtracab) print with like 6 walls for strength if needed.
With intention to keep springs, wheels, shock absorber unloaded if car is not in use, I designed my own stand. Tested with Slash 1:10 2WD and 4WD, just check how far shall be mounted on place. Tip - you can lay aside your model even above…
Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…
RC4WD Trailfinder 2 bed topper. I printed the topper with the front on the printer bed, use CURA to lay flat the trim and door. Used old packaging for the windows. Servo tape to connect to bed of truck. Mirror the side trim for the other…
Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws
So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…
Traction Tires STL Models for Mowrator 4WD – V1 & V2 Enhance your Mowrator with these Traction Tires STL Models, designed to provide superior grip for challenging terrains. Created with precision on May 14, 2025, these models offer two…
Versatile 935 4WD 1:16th Scale Uses M1, M2, and M4 screws
------------ NEW VERSION HERE: RUDE v2.0: https://github.com/iniqy/RUDE/tree/main ------------ Discord: https://discord.gg/Cc8tsbZAE3 Active userbase and many videos that show RUDE takes beatings like air. STEP files for v1.1:…
So I designed a track for the Tamiya Mini 4WD cars. This because I was not able to purchase them as they are not sold in Europe and my cardboard track kept keeping damaged. The parts provided willl enable the creation of at least a two…
International 4366 4WD 1:16th Scale Uses M2 and M4 Screws
A key ring for 4WD enthousiasts! Print the key ring in your favourite color(s). Choose the long or short wheelbase version. There are 4 rim and 3 tyre designs. Printing I printed the model on a Prusa MINI, with PLA+ filament. Layer height…
TOYOTA CUSTOM 4WD SHIFT LEVER (2.0) ……………………………….. ERGONOMIC Curved design hooks to the hand, easier to handle compared to the simple cylindrical shape. OEM INSCRIPTION Directions for shifting gears on top, just like the factory.…
This is a one-piece print that will screw on directly to a RC4WD Mojave body. I printed this standing up with tree supports.
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
General Description: Parts are for different wheelbases, pay attention to the description. SWB - Short Wheel Base, NWB - Normal Wheelbase, LWB - Longe Wheel Base. L and R mean left and right. Most parts are available for both sides; if…
this is all the time best childhood toys and the anime mostly marketing haha so i decide to make one, so folks can 3d print it quite engineering they make on TAMIYA, then i measure the dimensions using calipers can be an inspiration for…
This is a GoPro mount for the Rustler 4WD VXL - it might fit others but I've none to test with. It is intended to replace the roof bars, which are held on by four screws from inside the body. I experimented with a few designs, but settled…
Hello Everyone, I have designed this Cabin for my friend thomas_peat (you should definitely check out his instagram page @thomas_peat). It was designed for the RC4WD Toyota XtraCab 1987 Hardbody. The design has a "complete" version to…
I love truck & tractor pulls, hence why I made this model. Assembly instructions are in a PDF. I used 1.8mm brass rod for the axles. Tires can be optionally TPU. If there's any problems, let me know! I wanna make this as easy to…
International 4586 4WD 1:16th Scale Uses M2 and M4 screws
*only works for ms chassis assembly requires : 2 * m2 screws at any length 2 * m2 nuts or you can also glue it.
My knob bezel cracked so I thought I may as well design and print a new one. I used snug supports which seemed to work the best. I also recommend using ironing on all top layers for a smother finish. There are 2 models, Outlander4WD is…
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
Pulley Gear Set for belt drive 4wd RC cars (Sakura)
die hinteren Fender angepasst. the rear fenders adjusted.
Do you want to mount your RC4WD winch onto your BoomRacing BRX02 109 or 88? Look no further! Printed in 0.16mm layer with 75% Gyroid infill for max strength.
You can find more of my designs for 2020 extrusions here A 4-way tee for 2020 aluminum t-slot extrusions. Provides sturdy corner for bringing 4 extrusions to a square corner. Each one takes about an hour and a half with my slice settings…
Like usual, I used 1.8mm brass rod for the axles, but you can use filament. Tires are best printed in TPU. If there's any problems, let me know! I wanna make this as easy to understand/build as possible. Posting makes is greatly…
Super simple shock mount that allows you to get the top of the shock inline with the frame for flush body mounting. I printed with 100% infill for strength. Use 70mm shocks to maintain full suspension travel.
Note: There are two different versions, one with TRD marking on top and one is without. Background: My 4WD shift lever was making an annoying rattling noise, turns out I over-tightened it and something broke inside. With the lever's…
General Description Most parts marked L and R for left and right. LR parts fit or must fit both sides. However, some parts need to be mirrored in the slicer. Almost all holes are designed for M3 screws. Sometimes nuts are needed, but…
I made these for my Team Associated B44, but they should work for similar 1:10 RC cars too. The best material I found to use was Nylon for the rims, and Flex for the tire. Category: R/C Vehicles
Ibishu pigeon rc car frame from beamng drive
I've been really into Mini 4WD Car race these past 3 years. First time i race is actually around 23 years ago. Back then, Mini4WD cars are much simpler. But now, when i try to revisit the hobby, i was amazed on how much improved Mini 4WD…
After making a set of functional beadlocks for stock tires I adapted them to fit the larger RC4WD tires. These work and fit like my previous beadlocks, and I've copy and pasted most of the assembly info down below incase you havent seen…
This is the diy wifi ups using 2x18650 cells and wifi router module. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** Doesn't Matter Supports: No **Infill:** 15 Filament: Noname PETG BlackHow I Designed This Components…
Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…
Fender lines for the TF2 using the killerbody LC70, I printed with PETG because of the heat from the motor. Fits loosely under body and allows for adjustment depending on body mounting.
Hard Tailgate Logo I mounted the logo on two crawlers, variant 1 works better for me and looks cleaner. In variant 2, the glue dissolved the paint a bit (picture 1). Variant 1: Place the template on the tailgate and mark the letters.…
Weighted Wheels for Axial AX24 (1/24 AX24 XC-1 4WS CRAWLER) (This may work on SCX24s and similar sized crawlers but I have only tested it on an AX24) The weight added comes from Washers slid onto the part "Wheel Hub Main" before gluing on…
2025/12/08 update: Increased tolerance by 0.2mm so the board can be installed easier without having to use force. ===== This is the panel mount designed for AJ27-TIE 24w QC 3.0 USB module. They have a variant with 2 ports side by side,…
A looping for the custom track. This is not compatible with Tamiya manufactured track. Use the connectors and straight pieces from the original design to make a stable assembly. Printed with a 0,4 mm nozzle and 0,3 mm layer height. Note…
Introduction This is ’bak , a 1:14 scale redesign based on the 1:10 scale Robak and RUDE 3D-printable RC cars. Why “’bak”? The original design was scaled down to approximately 71%. Applying a similar transformation to the name Robak…
trofei mini 4wd fatti in PLA, cubo con cambio colore e successivamente stampate e incollate le stelle.
Designed this OnStep MAXPCB4w case with aviation plugs (GX12) support. This design is inspired by various cases available on OnStep wiki. The case has a sound funnel for onboard buzzer and an honeycomb grill for ventilation. The case…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
This is a mount to fix your RC4WD winch Remote if you don't want to fix it permanently. The remote is fixed securely, so you don't risk losing it but it is still easy to take it out of the mount thanks to the clipping system.
Everybody who owns a RC4WD Trail Finder 3 knows that the biggest problem of the chassis is the steering. I was trying to solve this problem and I knew that the biggest issue was that huge engine. After cancelling the engine using Rc4wd…
1) Scale dimensions (concrete numbers) I used a compact-car baseline (full-size examples) and scaled to 1:34 : Full-size (example) → scaled (÷34): Overall length 3,800 mm → 111.8 mm Width 1,700 mm → 50.0 mm Height 1,450 mm → 42.6 mm…
This is a rear stretch with integrated bumper for the RC2WD Trail Finder 2 SWB. The uploaded version does not have the logo for copyright reasons. I added two mounting tabs and posts that mount similar to the stock wrangler body. New…
Massey Ferguson 1500 4WD Tractor - 1:16th Scale Uses M4 and M2 screws 6.4mm (1/4in) rod used for axles Some holes need drilled out. Indents on model show spots.
The battery cover for my remote control snapped off. This includes both a .stl file for a replacement, and the .scad file used to generate it. This cover is a little more beefy than the original -- depending on what type of material you…
Mazda 323 BF 4WD dash surround. I have not tested this print, so if it needs tweaks let me know.
Blazer Bet Mat The body was mounted on 10 chassis and has 200 holes in the bed. The mat cover that. There is a normal version that ends at the bed and an extended version that closes the gap between the bed and the seat. Blazer Rear…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
Used on a 4WD Snorkel to mount a GoPro Suit 75mm/3" Snorkel Pipe
This is a replacement motor mount tab for the Makerfire 4-wheel drive robot chassis. These tabs have been tested on my robot for the past 5 months (over the winter of 2017-18) and have been holding up better then the one that came with…
I was inspired by Dune ornithopters if you can plese like these projects take a lot of time to make
WARNING Comply with your local law regulation regarding transmitter power. Failing to do so expose you to fine nor jail. You're warned. The F is that Boosting the RC/Video link of your drone that use 2.4G with directional antenna and…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
This is a case designed for 24w USB QuickCharge modules such as MH-KC24 or AJ27-TIE. Please note that the modules use similar component but have different size: MH-KC24 board are smaller at 17x34.5mm while AJ27-TIE are bigger at 19x38mm.…
MINI4WD motor break in & cooling tool 40mm fan*1 3*30mm copper rod*2
Raspberry Pi 4B case with space for a LifePo4wered Pi+ battery.
Go big or go home - and print this. You're not happy with the size of the XRP? You need more space for sensors? Or just want to make it a really cool off-road RC? Or even use it as 4x4? Connect 2 XRP Frames. Also have a look at my other…
Description : I designed this shade to get the most out of my Sansi 24w grow light. It focuses all the light directly onto my houseplants, boosting their growth and preventing glare in the room. The model shown was printed using the…
Made this for a custom build of mine, so I can't guarantee that it will be compatible with production chassis.
PG34WCDM Tobii 5 mount use 4 10mm x 10mm cube magnet to attach to monitor for the hook , PETG is recommanded to more easily slide tobii in place
Print it however you want. I printed mine in ASA with 4 walls on a 0.4mm nozzle and 0.2mm layer height. They're holding up well. If you're feeling fancy, you can blue the spring perch into place on the shock side, but they're held in…
These 4U generic mining / server cases are available locally under many labels. In Europe, they are, for example, from Inter-Tech ( https://www.inter-tech.de/Mining_Case.html ). If you want to use 6 GPUs with PCIe X1 riser adapter, the…
it take me 2 week to make this model
Prints in 54mins. Fits perfect into the RC4WD 1.55 Dirt grabber tires. These add support to the tire. The stock tire with stock foams fold over with nothing on the trailer. Add a vehicle to the trailer and the tire is flat. I did cut…
I own a couple API 4WW Water Wiggler Water Agitator for Bird Baths and the raccoons are always chewing up the floats and the little plastic mount. I designed these replacement parts based roughly on the original parts, but tweaked them a…
As I couldn't find a holder that actually fit my (boss') monitor, I decided to remix one :D
Print in PLA or PETG, just glue it to the charger with a double face tape.
Bottom frame for Freenove/Arduino 4WD Car
Two versions, one is flat on the back, the other has 2 recessed bits if you want to glue in a pair of 60mm x 10mm magnets. People will say not to use PLA or PETG, but if you spray it with a UV clear coat I believe it will be fine. I used…
The classic “Connect Four” game is now available in the WAGO version! This creative idea from our trainees started as a milling project and evolved into a fully printable 3D model. All you need is the 221 Series in different colors — how…
A friend has requested a scrutineering box for his mini4wd cars that can be dissassembled and stowed away when not in use to save space. I have made this into a 5-panel box that can be assembled without tools, using dovetail joints to…
Top Frame for Elegoo/Freenove 4WD Car
A laser scan of my ryobi 2ah 4v inspection lights battery and "battery cap". The top portion of the battery is translucent (green in this image) and cannot be scanned so I reconstructed it. The dimension of the usb tab may be slightly off…
![RUDE - 1:10 4WD RC car [v1.1] - Discord](https://media.printables.com/media/prints/692212/images/5854877_985fd4b0-7eaf-40de-89a9-f5738de6e457_e1ed03c1-5513-410d-a557-faf03e0ed53b/rude_wing.jpg)
