173 models
Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Když se ztratíte v tom, co je nabito a vybito, je fajn si vytisknout pořadač.
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
The case was originally made for attachment to an iPhone but because of the inherent size of the transducer, it proved to be too bulky to carry in a pant pocket. I use it for storage and protection. It was printed utilizing PLA filament…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
PETG plastic is better for printing the handle, as it will need to be unbent to slip the half rings through - I don't think you can do that with ABS, but I haven't tried it. Ver 1.3 update: - new handle size - now there are three of them:…
English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…
This model is compatible with the lego system.
Spool Holder / Filament Dry Box for Ikea 365+ 10.6L box --- This model use Ikea 365+ 10.6L that can put 2 spool per box I also have model for one spool per box available here:…
Video on case: https://youtu.be/p2pK2BuXsXg Had been noodling around with creating an Open Frame case for a while now, but after seeing this case ( https://www.instructables.com/id/Open-Frame-Mini-ITX-PC ) I finally decided to make one.…
A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…
Ensuring your filament is dry during printing can greatly improve print quality. This is especially important in humid climates and for more hydroscopic materials like Nylons and TPUs. We weren't happy with available printed dry boxes and…
I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…
This is a simple desiccant container that fits into an Ikea 365+ 10.6 liters box (or similar sized/larger boxes of your choice). The lid is held on by clips (I recommend two) to make it spill resistant. Dimensions are approx. 150x64x58mm…
I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below. Modifications Modified the silica gel container to be the spacer for the spool…
This model is compatible with the lego system.
Video of project: https://youtu.be/p55gvl1gWus See my other case designs: https://www.thingiverse.com/lightofhonor/designs I wasn't thrilled with the price of the very small SFF cases so I decided to take a stab at designing one myself. I…
ENG This is the 3D model of the popular IKEA 10.6L container , designed to verify that a custom Filament Storage solution will fit inside it. The dimensions were measured manually with unprofessional tools, but they've proven to be…
This model is compatible with the lego system.
Makes Seat Models Ibiza mk3 Typ 6L 2002-2008 I was printed it from ASA in one piece in P1S
The drybox is made from an IKEA 365+ 10.6 l food storage container , with a spool holder for spools up to 2 kg. Optional holders for the following humidity sensors are included: The humidity/temperature sensor used in the Prusa enclosures…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
I took the 8mm offset model and adapted it so I could use the command strips mount and have some space behind my multiboard as well. I printed with 3 walls, 15% infill.
This is a filament buffer and spool within an 'Ikea drybox 365+ 10.6 liter' for the MMU2s. I wanted my filament-spool, but also the whole route to my MMU2, in a dry and protected environment. So I designed a buffer within the largest…
This model is compatible with the lego system.
UPDATE! I have added a new narrow version of the filament passthrough (V3). The witdht of the passthrough in this version is 30mm, an accompanying holeguide has been added as well!…
Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm
Spool holder for Ikea 365+ 10.6l box for storage with thermometer and hydrometer. It annoyed me that the spools kept rolling back and forth. All the others I found always came with ball bearings and other accessories for printing out of…
Habilite el modo planchado y pared aracne para imprimir. 25% de relleno giroide
I use Ikea 10.6l containers, to store all my filaments, and this model, helps keeping them in place, and not wobble around. I really liked the original model, but wanted to use some of the desiccant beads I have, to keep the filament dry,…
This model is compatible with the lego system.
The IKEA 365 10.6l storage boxes are ideal for storing your filament. Add this 3d printed container, with your favorite desiccant (silica gel), in the box to keep it dry. The desiccant container is not too big, pretty low-profile and fits…
A simple shift gate for Futaba RC transmitter T6L. This separates the three speeds of the Tamiya 1/14 tractor trucks (and also the high-lift models) allowing easier forward and reverse control in all three gears. Once you have set up your…
I had a lot of problems with filament being stuck due to the higher friction of pulling out of the Ikea 365+ container and through 1.5m of reverse bowden. I liked the version created by AlexMu but there were things that I thought could be…
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
This model is compatible with the lego system.
Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5T784a09DOL Category: 3D Printing
This model is compatible with the lego system.
Oil Filter 14 Flute, 74mm (VW 1,6ltr SR)
>> Use case See for Oestle's version to get the base and filament rods. Ikea 365 boxes are great to store filament in there! But it is more convenient to have them on some rods, so they do not roll around inside. There are many options on…
I designed this insert to be heavy-duty; it has an internal support—designed to be printed solid—that surrounds the kerf cut. Print this as an assembly to retain the ability to print the support part as a solid inner piece. Enjoy! Print…
Halter / Organizer für die IKEA 365 10,6l Vorratsbehälter Die Halterung des Dryers ist passend für den aus diesem Set → https://makerworld.com/en/models/56953#profileId-58657 ← !Sprich nur das für die Eckigen Hygrometer!
This is a housing to mount the NeoPixel Ring 16LED version. The housing has two holes inside, which allows you to mount it directly to a wall with nails, or you can print the LCD monitor holder to put the ring on top of your LCD monitor.…
This model is compatible with the lego system.
Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…
I've modelled and printed these cases that fit the Aqara WXKG16LM and WXKG17LM very nicely. The cases can be mounted onto existing EU switch-boxes using the standard screw. This design allows me to still easily access the physical switch,…
Enclosed my Laser-Engraver
This is a light diffuser for the SmallRig P96L RGB light. Here are the print settings: Layer height: 0.2mm Filament: White PLA Top shell layers: 1 Top shell thickness: 0mm (Change to a higher value for less light passthrough) Bottom shell…
For people who are using https://www.printables.com/model/185335-filament-trockenbox-filament-dry-box and wants to add a circular hygrometer that is removable and is installable and also non-destructive. I have created a hygrometer…
A slick keychain of an Seat Ibiza 6L (2002-2007). Made to print in more colors, 16th and 17th layer if you use 0.2 hight. The seam in the photos is only from the modeling software and is not present in prints. No supports ofc🙃
Solar filter for the Canon EF 100-400mm F4.5-5.6L IS II USM (Mk 2) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy…
Print in PETG, ABS, or ASA. 0.2 mm layer height should work. Try 4 perimeters and at least 15% zig-zag infill. Print with supports. Print Settings Rafts: No Supports: Yes Resolution: 0.2 MM Infill: 15% Filament: ANY PETG, ABS, ASA ANY…
I made these tools in order to allow me to store my engines without leaking everywhere or to allow me for a clean removal by leaving the radiator hoses on either the engine or Radiator, I have also included a few variations of some…
I needed to fit 2 Formfutura Spools. (78 mm wide) You'll need a bit of M3 Hardware, two lengths of PTFE tubing and for better hold, 8 6x3 mm magnets (had them still from the clicky probe stuff) An M5 threaded rod and two nuts are also…
You have to file the edges down to make a bigger surface to stick. Print with suport you might want to print it with high thermal resistance material PLA works in just fine in coolder regions.
Da ich es sehr unübersichtlich finde viele Einzeldateien zu sortieren/zuzuordnen, habe ich die Baugruppen zusammengefasst. Die Baugruppen können auch wie zusammengeführt gedruckt werden, aber ich denke das kann jeder für sich selbst…
2.6 L SFF Case (PETG) Tiny APU Case, Perfect for 8700G's and alike. This is about as small as I could get it without some crazy nonsensical design, using a readily available standard PSU, There are some smaller internal PSU's but usually…
Bottom.stl is shaped inside similar to the KardiaMobile 6L and inside height is the same as the unit. There are two choices for the top. Top.stl model has ridges in it to make the top snuggly fit on the bottom. Toploose,stl does not have…
I have designed this grip to mount directly on my replica Zenitco Sport-4 handguard made by 5KU. The design is based on the Zenitco RK-6L grip, a RK-6 variant for the proprietary mounting system of the Zenitco Sport handguards. It…
This is a hard case for storing the SmallRig P96L RGB light. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…
this is a model designed and draw be me to hold the car mats for my audi a3 1998. i could not find where to buy the pieces so i make new ones. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%…
Box for insert : printables.com/model/658690-aaaaa-battery-box-5hao-7hao-dian-chi-shou-na-he/files
Silica container which fit with DAISO kimchi box work with 16L and 12L both 20251227 Fixed Funnel diameter
feet for a 6l steel 300bar air cylinder with cable tie hole for securing to the tank
Important note: This model was created according to the publicly available drawing by Wiegand-Glas. All dimensions that were not on the drawing were freely estimated by me! My recommendation for the print settings: Material: - Layer: -…
The whole VAG seat recliner knob, tested and working in a Seat Ibiza 6L but should work on most of the vag group cars of that era (approx.. 2002) Please don't print this before testing the mechanism alone. I've posted the mechanism for…
I bought two Hystou P09-6L fanless computers from China. They are great machines btw., but have an annoying blue power button LED. Quickly created a cover, which can be plugged in the HDMI port (I don't need it anyway). You will find…
What was changed in this remix: different size of the rolls made by @Herranz_81298 to fit in to original body design of @Twotone74 reduced bearing placement diameter (22.1mm → 22mm) longer shaft for tight fit (158mm → 160mm). It could be…
The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…
Silhouette of an Ibiza 6L that was bodykited by MangaTuning Around 170 x 100 x 10 mm Scaleable
Ein Halter mit Schablone für ein Turnigy D56LV Servo für den Einsatz in einer Tragfläche. Das Servo kann damit leicht in eine Fläche zur Querruder oder Klappen Ansteuerung eingebaut werden. Siehe Fotos. Wer es ändern möchte, ein STEP File…
Unfortunately I could never make the spool rewinder work reliably. So while trying to switch to a buffer system I couldn't find one that worked for me. My printers live in a small room and space is extremely limited. My solution was to…
Trockenbox mit Silicabox und Hygrometer zum Drucken direkt aus der Trockenbox.
Handle fits with original m4 screws
写真の構成例 マザーボード:ASRock H370M-ITX/ac 電源:SFX電源ユニットcore-SFX300 https://www.amazon.co.jp/gp/product/B00JTSFYFA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 CPU:corei5-8500T(TDP35W) GPU:エヌビディアクアドロP620 メモリ:DDR4 2666 8GB X2 補助記憶:M.2SSD 冷却FAN…
Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…
Dyna Dry files changed for 5.6L box
Holder for 3.5" HDD disk that is inserted instead of the original CD/DVD drive. There is no need to screw the disc, I just recommend inserting cardboard to dampen the disc at high speeds as seen in the photo. Printing without supports,…
This model is compatible with the lego system.
Space for loads of silica gel and a bowden tune to connect directly to printer for maximum dryness. Notes: The Roller is made of several parts, the main roller, the Roller Pin and 2 washers as well as 2 x 608 Bearing. It was made in…
Attachment to secure the wheels of Bosch wood shredders. This part often falls out and gets lost, so the wheels randomly detach. It's very slightly larger than needed as even the two wheel pipes on my shredder have slightly different…
This is the rewinder part of the project published here: https://www.printables.com/model/192366-drybox-ikea-365-106l-autorewind-and-not-spoolholde to assemble it please look at source project
I often carry my aluminum bottle in the side pocket of my backpack where the bottle is exposed to frequent mechanical damage 🏔 . Hopefully, this cover will partially prevent it. Print instructions ⬢ Material: Prusament PETG Carmine Red…
Have an Ultrasonic Cleaner and some Vinyl Records? The ultrasonic cleaner can do a great job of cleaning your records. All you need is an arbor and some discs to fasten some records to, (available on Thingiverse) a motor to turn them…
A pair of stands for VW engine heads which make it easier to check fit/remove the camshaft and set valve clearances. No more fighting with the head or balancing it on some wood as you check valve clearances. Simply screw two head bolts…
I was looking for a variant of single drybox for 2kg spools (prusa), could not find something I like, so I updated the rods to fit inside the original box Bearings 608RS without covers (cleaned and oiled) Plastic rods tend to bend and the…
A spoolholder for the Ikea 365+ 10,6L boxes. Modified to fit 2x 1kg spools, or 1x 2kg spool.
just like with the last Lid Screw-Adapter I wanted this to be as rigit as possible. The cheapo 20L Barrel is fine for the price but I wanted to test a barrel with thicker walls. Its just a bit to flimsy for my taste… Long story short: I…
Funnel to refill batteries with distilled water. Otherwise I normally spill
Solar filter for the Canon EF 100-400mm F4.5-5.6L IS USM (Mk I) lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this…
Box to cover frequency counter. There are no holes, you have to drill it base on your needs/ connector usage. You can insert in in switch on/off for 9v batter or power adapter jack for outside connection. Enjoy.…
I got myself a sample pack of some mini spools (150mm) and needed a place to store them. So I created this spool holder for a 10.6L IKEA 365 box. It can hold up to 6 spools with 150mm diameter and 37mm width. And in the bottom you can…
I have a set of these collapsible baskets with completely inadequate handles that have broke on every basket. So I designed these replacement handles. Clevermade Collapsible Shopping Basket The handles have recesses so the baskets still…
Update 20250106 V2: Made some adjustments to the angles. Corrected some distances.
Meant for this specific one container from ikea. Add some silica beads in the free space and you have a nice dry box. You can reuse the same piece of tubing for lubrication that the standard voron 2.4 build required of you, just a bit…
Let’s start with everything you’ll need. Printed parts: Folder – spoolholder : print all parts 2x Folder - Filament pass-through : print all parts 2x Original spoolholder rails : 2x Original spoolholder base : 6x Silica gel container. I…
This is remix of https://www.thingiverse.com/thing:4246377 and https://www.thingiverse.com/thing:4570340/remixes . With the remix bearing holder by 3opaH you don't need to buy any nuts as the bearing holder is threaded. Because they were…
Seat Ibiza 6L mirror camera attachment, you can find the step file for your adaptation
You need a flat plastic stick, gently pry and the fidlock clip will pop out of the clamp. And you will need a 20mm wide fabric strap to sew the loop that connects to the printed clip. You can print with any filament you like but I…
