Counting matching models…
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for one variant
VW Bus Pen Holder with Accessories for someone who wants to decorate and organize his desk! HowToPrint : - Recommended Layer Height: 0,2mm ( 0,1mm / 0,05 for Logo & Lights) - Support: No - Infill: 20-25 % - PLA / PETG works fine. -…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for PETGSource material: PET
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial All files have been test print on a MK3s+/CR10s printed in PETG. If there's a piece missing shoot me a…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for PETGSource material: PET
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Print approx. €3.51–€4.28 excl. taxPreliminary estimate for one variant
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle…
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for PETGSource material: PET
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
V2 of this model is now up! Go check it out Overview: This system was designed for a college independent study and was inspired by the Tons Gear Organizer product . It is designed to work with a roughly 1" (specifically, 24.6 mm) wooden…
Print approx. €8.05–€9.84 excl. taxPreliminary estimate for one variant
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Wall mounted storage for Dyson accessories. The angled mount allows the storage of tools that do not fit on many vertical mounts. New version v30: Larger screw holes as per popular demand(4.5mm with 8.7mm countersink) Slightly larger…
Print approx. €4.09–€4.99 excl. taxPreliminary estimate for one variant
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I’m excited to share my latest project: a custom case for storing the original Prusa accelerometer , specifically designed for the MK4 and MK4S 3D printers. The case is made up of two parts. The inner section is my own design, created to…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Don't start to print this if you don't have the needed magnets… more info bellow Don't start to print this if you don't have the needed magnets… more info bellow Please consider following me if you download and print my work. It’s a…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
The passage through the wall is made for a wall thickness 100 [mm] +/- 10 [mm]. The exit is made for a wall thickness 5-15 [mm].
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
Designed for the Storage Cheese Plate , this screw has a ¼"-20 thread and is ¼" long. The head diameter is 9.5 mm, the head height 3.4 mm and the hex socket size is 4 mm.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Scale up as desired for a full size print! I printed theses at 600% with default 0.3m draft settings, easy print with some supports required
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
This is an accessory or waste tray for the Prusa MK4/MK4S 3d printer. It is a remix with a few tweaks of my preference: Added a second clip to attach box to printer frame extrusion Added an accessory cover out of another published model…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
Description: 2020 Aluminium extruded profiles are extremally useful for construction of 3d printers, laser cutters and other cnc machines, hence they can be found on the shelf of every maker. This design open up a new opportunity to use…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
This is a wall mount for KLICKfix bike accessories, like bags and baskets. The mount fits for original KLICKfix with dimensions 85 mm x 35 mm. It's made for ⌀4 mm screws. If you have good bed adhesion you can print this without supports.…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Voici un modèle de support mural pour vos accessoires Dyson V12 & V15. Le model nécessite des supports peints que vous trouverez en images dans la description.
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
This is an accessory for the XRP robotics kit, that allows it to draw! Just easily attach a pen/marker and the robot becomes able to draw. I would not recommend you to use a pencil as it wears down with use. It is pretty small (only 2.6cm…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Let others enjoy a little bit of nature in your hair with this colorful geometric flower and hummingbird hair accessory. Using the layers at 0.3mm you can print this with 5 different manual color changes starting at 0.8mm, 1.1mm, 1.4mm,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
An HID access card holder. Does not interfere with use. Covers photo and text on the card for privacy. Protects from damage if you were given a card and are expected to pay for replacement Print at default 0.2mm QUALITY settings. Print it…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Updated to print in less than 2hrs. Cleaned up to handle 8.5x11 sheet of transparency film and a change to the bottom support to accept the thin film. Uses 3 hooks so that a paper hole puncher can be used on the shield transparencies.…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Video of the project here: No, no, you will not open a black hole and tear the universe apart. Well, hopefully not. We will see. This is an add-on for your bike to collect airborne particles on a microscope glass slide. It's literally a…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
Small set of accesories with Harry Potter theme. hope you enjoy it as much as we did!
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I recently got an Orion telescope with their EQ-1 equatorial mount that's used with various models. The included tray was ok, but there's no organization for your accessories and they end up jumbled. This improved accessory tray has…
Print approx. €8.52–€10.42 excl. taxPreliminary estimate for one variant
Vor- und Nachteile auf einen Blick: + M3 Schraube der z-Achse zugänglicher + Kabelumlenkung um 55° + flacher um Kollision mit Hotendlüfter zu vermeiden + gleich viele Schrauben - original Gehäuse für den Prusa Mini bleibt die sichere…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Clothing hook with different positions
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
Optimized Ri3del s model for attaching accessories from below. Recommend printing in PETG. If printing in ABS or ASA, you need to compensate for the shrinkage of the material, by enlarging to model to about 100,4%.
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
At my current apartment complex the main door and lift use a RFID HID Prox system to give residents access. After moving in we decided to install a smart lock on my apartment's front door. The Yale Unity uses more modern and secure Mifare…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Storage box for Philips MG3721 razor and accessories
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG for strength and flexibility. I'm using the switch sold by LaserCreations on Etsy. The switch is mounted vertically on the inside of the front X rail. When the rotary is not attached these clips keep the rotary harness out…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
This design was indented as a Pen Stand/Pen holder for my collection of Uni Pin Fine Line Pens but the holes were too tight for the pen but it worked for other pens, dry markers and felts. V5 Hi-techpoint 0.5 fitted nicely, as did some of…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
A simple hanger to mount your Festool D36 vacuum accessories onto a vertical surface. Prints as-is and does not require supports. I chose PETG as it is more elastic than PLA, but anything works fine. I upped the perimeters to 3 and infill…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D-printable smile mouth , designed specifically to fit Bunchems (the small spiky balls that stick together). The mouth features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
From Thingiverse: Couldn't find any plug and play ADXL345 holder, so i designed my own. It's designed to be used in place of the stock probe, so the only additional thing you need (obviously other than the adxl345 itself) it's a neodymium…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
This lamp runs entirely on 5v from the ESP32. So, it only needs a single USB cable to power the build. I think you should be able to get away with not using a separate power supply due to the relatively small number of LEDs. It's possible…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Introduction This is an accessory pack for the EIBOS Cyclopes. A handle that connects to the top using two of the seven mount holes. Plugs to plug the 10 filament holes. A M6 washer to connect a PC4-M6 PTFE Tube Connector to one of the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Smartphone and tablet Stand with hole Remix by someoneonly is licensed under the Creative Commons - Attribution license. A remix of http://www.thingiverse.com/thing:1387260 I did not want to thread the cable through every time so I just…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
20mm mounting surface for a Manfrotto video tripod. Designed to clip onto the legs which are two 16mm rods. The surface is designed to support a piece of velcro, or the model can be modified to hold an accessory. I will be using multiple…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
support mural pour accessoires de l'aspirateur balai Ryobi, parti solo, double, support de charge, tout est indépendant les uns des autres ou peuvent être combiné selon ses besoins. pour info: Si vous souhaitez le même rendu (vert & gris)…
Print approx. €10.56–€12.91 excl. taxPreliminary estimate for one variant
Geometric wall clock face, made after and for [Networks of Philly](https://networksofphilly.org/). The clock face is 4 mm thick, and as supplied has a colour change at 3.6 mm. The central hole is 9 mm so should work with an M2188 or 5188s…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
Do you wish you could attach something to your Arrow Antennas Yagi boom? Look no further! Print in PETG. Use a ¼" 20 - ½" bolt.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Allows for convenient placement of the accessories on the doors or sidewalls of your storage compartment. The long part can be glued together but gluing is optional. I did not glue the parts together. There are more accessories available…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Stuart from Minions is joining the Nothing family! Inspired by Stuart in black suit . Note: This model was printed with 0.6 nozzle, which is the only one I have, but it should also work with 0.4 nozzle. I had access to grey PETG, yellow…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Applications and Impact: The Dice Box 2.0 is designed to assist individuals who lack fine motor skills in playing dice-based games. This product allows users to play in an independent and different way by eliminating the need to pick up…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
These are 3D-printable eyes with eyelashes designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes are sized to press gently into Bunchems without glue, making them reusable and safe for creative play.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The original parts are prone to breakage, esp. the PG ones.
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
My Wabeco F1210 mill got some threaded holes on the side (for a measurement-system). - So why not use them for mounting a toolholder for the spindletools, brushes and other accessoires?
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET
The Input Shaper needs to be calibrated from time to time. This is necessary after changing the installation location, adjusting the belt tension, or changing the area around the Nextruder.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
A practical set of 3D printed holders designed for the Xiaomi X20 robotic vacuum cleaner. The holders provide convenient storage for replacement dust bags, mop pads, and a floor-cleaning solution bottle. They can be mounted on a wall or…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Ceci est un accessoire pour éviter de tenir le boutons de la perceuse ou quand nous avons pas la place de passer la main
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Diglett from pokemon quest I spray painted the nose and base and printed the singlet and the white and black parts each color separate in file other then those spray painted.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
I wanted to upgrade my quad's headlights and indicators from the originals to these: HIGHSIDER pro Headlight Dual-Stream Next LED https://www.highsider.de/produkt/highsider-dual-stream-next-led-scheinwerfer/ Kellermann Rhombus S Dark LED…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Make your life easier with "Putter Buddy" featuring a quick connect putter grip attachment that makes it easier (no bending down) to retrieve your golf ball from the golf greens cup. This attachment consists of a retriever with line…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…
Support the designer: Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the…
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
Screen Accent for the Elegoo Centauri Carbon.
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
Some Requires supports please join my discussions group https://www.printables.com/group/kaleb08-upcoming-models-oQJxrGR
🖤 The Honest Shelf // Vol. 10 🤍 Elevate Your Space with Modern Floral Wire Art ✨ A set of three elegant, continuous-line flowers designed to bring a sophisticated, artistic touch to your home. Part of a collection focused on high-impact,…
This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…
I have created a set of accessories that will help you organize and improve your workflow. All stl models that contain the "festool" logo have the logo incorporated, which can be divided into parts for multicolor use, or split into…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Introducion The compact and lightweight design of the Mini 4 Pro makes this drone great for travelling. Sadly, there was no safe way to transport it - until now! The Basics: The complete set contains three types of boxes. They are…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…
Summary This is a 1:24 scale model of a waste bin / trash can in a kit card style. Versions The complete sets are available in a 3MF file for a one-color print. There are 3MF-files with predefined colors intended for users of AMS or MMU.…
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
Welcome y'all, I remixed this masterpiece to support larger cans of 0.5 liters, added a neat hook to hold your car keys (don't drink and drive) and a condom holder because you never know when you might need it. Enjoy! Personally I printed…
I add borders for a smoother look
Every year my household tradition is to print Halloween decorations for fun. This year I found the amazing Lego-Like Skeleton model from Julia Ebert and wanted to enhance it with some fun Pirate accessories. While there were existing…
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build…
This adapter is designed to hold all the accessories that came with the Dyson V11 vacuum in a small space envelope. A smaller version is also available. Accessories do not obstruct each other and can be accessed freely and easily.…
When slicing the existing Stud with Logo Remix I found the E had some layer missing, the mesh was not quite right, I started with the “Giant Lego Wreath Stud.step” in the original Wreath and added the Logo from an old project I did with…
Source / Attribution: These are remixed from https://www.thingiverse.com/thing:2860289 . I wanted to clean up the F3D file so I could follow it and create some additional mounts. Having done that, it makes sense to release my updates back…
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I wanted a place to store Lucky 13 and his extra hands and accessories so I whipped this up. Probably could use some tweaking but it holds 12 hands, has a place for his hat, and can hold a number of accessories on the back of the lid.
![Prusa Mini [LPHC] Low Profile Heatbed Cover with 55° angle make M3 screw for z-axis more accessible](https://media.printables.com/media/prints/93132/images/960286_eda91968-971a-4bcc-8536-cf061363b561/image_de6843e2-4875-4814-8d43-491fdd692020.jpg)
