Liczymy pasujące modele…
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu
VW Bus Pen Holder with Accessories for someone who wants to decorate and organize his desk! HowToPrint : - Recommended Layer Height: 0,2mm ( 0,1mm / 0,05 for Logo & Lights) - Support: No - Infill: 20-25 % - PLA / PETG works fine. -…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This remix of my original Flat Pack Mini Box is customizable within PrusaSlicer and has the following features: Stores 9 Lucky 13 hands in sockets UPDATE: alternate version for 9 Mini 13 hands on ball posts Stores two original Lucky 13…
Wydruk około 4,15 €–5,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.5mm extrusion width, No infill, 2 perimeters, side plates 100% infill M4x20 or M4x25 hardware, recommend wingnuts or 8-32 imperial All files have been test print on a MK3s+/CR10s printed in PETG. If there's a piece missing shoot me a…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Wydruk około 3,51 €–4,28 € nettoWstępna wycena jednego wariantu
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle…
Wydruk około 9,61 €–11,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
V2 of this model is now up! Go check it out Overview: This system was designed for a college independent study and was inspired by the Tons Gear Organizer product . It is designed to work with a roughly 1" (specifically, 24.6 mm) wooden…
Wydruk około 8,05 €–9,84 € nettoWstępna wycena jednego wariantu
Mini school accessories: Set of Rulers, Beaker, Drinking Bottle with Lid, Lunch Box with Lid, Folder, Palette Printing from PLA, without supports, layer height 0.2 mm. Paper notes included.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Wall mounted storage for Dyson accessories. The angled mount allows the storage of tools that do not fit on many vertical mounts. New version v30: Larger screw holes as per popular demand(4.5mm with 8.7mm countersink) Slightly larger…
Wydruk około 4,09 €–4,99 € nettoWstępna wycena jednego wariantu
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I’m excited to share my latest project: a custom case for storing the original Prusa accelerometer , specifically designed for the MK4 and MK4S 3D printers. The case is made up of two parts. The inner section is my own design, created to…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't start to print this if you don't have the needed magnets… more info bellow Don't start to print this if you don't have the needed magnets… more info bellow Please consider following me if you download and print my work. It’s a…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
The passage through the wall is made for a wall thickness 100 [mm] +/- 10 [mm]. The exit is made for a wall thickness 5-15 [mm].
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Designed for the Storage Cheese Plate , this screw has a ¼"-20 thread and is ¼" long. The head diameter is 9.5 mm, the head height 3.4 mm and the hex socket size is 4 mm.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Scale up as desired for a full size print! I printed theses at 600% with default 0.3m draft settings, easy print with some supports required
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
This is an accessory or waste tray for the Prusa MK4/MK4S 3d printer. It is a remix with a few tweaks of my preference: Added a second clip to attach box to printer frame extrusion Added an accessory cover out of another published model…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
I designed this parametric access hatch specifically to be inserted into drywall (plasterboard) panels , particularly for ceiling installations . It provides a clean and practical solution for creating an inspection opening , allowing…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
Description: 2020 Aluminium extruded profiles are extremally useful for construction of 3d printers, laser cutters and other cnc machines, hence they can be found on the shelf of every maker. This design open up a new opportunity to use…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wall mount for KLICKfix bike accessories, like bags and baskets. The mount fits for original KLICKfix with dimensions 85 mm x 35 mm. It's made for ⌀4 mm screws. If you have good bed adhesion you can print this without supports.…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Voici un modèle de support mural pour vos accessoires Dyson V12 & V15. Le model nécessite des supports peints que vous trouverez en images dans la description.
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
Just add few screws and chain or rope and you have working slidelock. You can have it just like that or mount on some small door / window to train the skill. From expirience, you can change the difficulty by adjusting length of chain. But…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
I found this inventive vent clip: https://www.thingiverse.com/thing:3880775 However, it's intended for right hand drive Focus MK3 ST and RS models. Since I'm in the US, I sliced up the mount in Tinkercad, mirroring the asymmetrical…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an accessory for the XRP robotics kit, that allows it to draw! Just easily attach a pen/marker and the robot becomes able to draw. I would not recommend you to use a pencil as it wears down with use. It is pretty small (only 2.6cm…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Let others enjoy a little bit of nature in your hair with this colorful geometric flower and hummingbird hair accessory. Using the layers at 0.3mm you can print this with 5 different manual color changes starting at 0.8mm, 1.1mm, 1.4mm,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
An HID access card holder. Does not interfere with use. Covers photo and text on the card for privacy. Protects from damage if you were given a card and are expected to pay for replacement Print at default 0.2mm QUALITY settings. Print it…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Updated to print in less than 2hrs. Cleaned up to handle 8.5x11 sheet of transparency film and a change to the bottom support to accept the thin film. Uses 3 hooks so that a paper hole puncher can be used on the shield transparencies.…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a great way to show that you or your business accept bitcoin payments on-chain or via lightning. The plaque might be on the thicker side, but it's sturdy. ℹ - The gcode file already has the color changes, 3 total changes. --- If…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
I have a finicky dryer vent connection that I needed to be able to access to secure, and also to open up and clean, and the easiest way to access it was to cut a hold in the drywall. So, I made a 20cm x 20cm hole, knowing that this was…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Voigtländer Bessa 1 viewfinder / sportsfinder Material PETG 1 x 2x4mm screw Do you like it? Please consider to buy me a cup cup of coffee .
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Video of the project here: No, no, you will not open a black hole and tear the universe apart. Well, hopefully not. We will see. This is an add-on for your bike to collect airborne particles on a microscope glass slide. It's literally a…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Small set of accesories with Harry Potter theme. hope you enjoy it as much as we did!
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently got an Orion telescope with their EQ-1 equatorial mount that's used with various models. The included tray was ok, but there's no organization for your accessories and they end up jumbled. This improved accessory tray has…
Wydruk około 8,52 €–10,42 € nettoWstępna wycena jednego wariantu
Vor- und Nachteile auf einen Blick: + M3 Schraube der z-Achse zugänglicher + Kabelumlenkung um 55° + flacher um Kollision mit Hotendlüfter zu vermeiden + gleich viele Schrauben - original Gehäuse für den Prusa Mini bleibt die sichere…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Clothing hook with different positions
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Optimized Ri3del s model for attaching accessories from below. Recommend printing in PETG. If printing in ABS or ASA, you need to compensate for the shrinkage of the material, by enlarging to model to about 100,4%.
Wydruk około 2,84 €–3,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have remixed @Chya excellent vertical axis windmill design to incorporate a plug on one end so that the windmill can spin on the top of a metal spike. This model should be printed in PETG with organic supports on all the bottom sides of…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
At my current apartment complex the main door and lift use a RFID HID Prox system to give residents access. After moving in we decided to install a smart lock on my apartment's front door. The Yale Unity uses more modern and secure Mifare…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Storage box for Philips MG3721 razor and accessories
Wydruk około 4,64 €–5,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in PETG for strength and flexibility. I'm using the switch sold by LaserCreations on Etsy. The switch is mounted vertically on the inside of the front X rail. When the rotary is not attached these clips keep the rotary harness out…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Accessory parts for noticeably big, variable CG Scale. All the way from a F3x glider to anything like a 25kg warbird or jet! Additions and some remixes of the original CG scale parts from here ……
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
This design was indented as a Pen Stand/Pen holder for my collection of Uni Pin Fine Line Pens but the holes were too tight for the pen but it worked for other pens, dry markers and felts. V5 Hi-techpoint 0.5 fitted nicely, as did some of…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
A simple hanger to mount your Festool D36 vacuum accessories onto a vertical surface. Prints as-is and does not require supports. I chose PETG as it is more elastic than PLA, but anything works fine. I upped the perimeters to 3 and infill…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D-printable smile mouth , designed specifically to fit Bunchems (the small spiky balls that stick together). The mouth features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
From Thingiverse: Couldn't find any plug and play ADXL345 holder, so i designed my own. It's designed to be used in place of the stock probe, so the only additional thing you need (obviously other than the adxl345 itself) it's a neodymium…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu
This lamp runs entirely on 5v from the ESP32. So, it only needs a single USB cable to power the build. I think you should be able to get away with not using a separate power supply due to the relatively small number of LEDs. It's possible…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
I have a shoulder bag that I normally carry over one shoulder. It has 2 disadvantages: It always slides from my shoulder The straps are not really secure, it loosens over time, lengthening the strap. Being a “maker” with a 3D Printer I…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smartphone and tablet Stand with hole Remix by someoneonly is licensed under the Creative Commons - Attribution license. A remix of http://www.thingiverse.com/thing:1387260 I did not want to thread the cable through every time so I just…
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
This model is based off of its appearance Dark Souls series: Supportless for FDM. Printing as accessory for miniatures? Scale down to 20% for 25mm / 28mm miniatures (Warhammer, Dark souls tabletop games & similar). I made these models…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
20mm mounting surface for a Manfrotto video tripod. Designed to clip onto the legs which are two 16mm rods. The surface is designed to support a piece of velcro, or the model can be modified to hold an accessory. I will be using multiple…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
support mural pour accessoires de l'aspirateur balai Ryobi, parti solo, double, support de charge, tout est indépendant les uns des autres ou peuvent être combiné selon ses besoins. pour info: Si vous souhaitez le même rendu (vert & gris)…
Wydruk około 10,56 €–12,91 € nettoWstępna wycena jednego wariantu
Geometric wall clock face, made after and for [Networks of Philly](https://networksofphilly.org/). The clock face is 4 mm thick, and as supplied has a colour change at 3.6 mm. The central hole is 9 mm so should work with an M2188 or 5188s…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena jednego wariantu
Do you wish you could attach something to your Arrow Antennas Yagi boom? Look no further! Print in PETG. Use a ¼" 20 - ½" bolt.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows for convenient placement of the accessories on the doors or sidewalls of your storage compartment. The long part can be glued together but gluing is optional. I did not glue the parts together. There are more accessories available…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
Support accessoire pour la cuisine, de conception permettant de supporter du poids, le fichier sera à votre disposition pour être modifié à votre convenance. Pour faïence de 10 mm et joint de 0.5 mm. Facile et rapide à assembler.
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
Herein are a valve wrench with a coil lanyard and attachment clip as well as a clip-on tank status indicator. All can be printed in PLA without support, but the wrench requires at least 4 perimeters and 40% in-fill (more of both the…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Stuart from Minions is joining the Nothing family! Inspired by Stuart in black suit . Note: This model was printed with 0.6 nozzle, which is the only one I have, but it should also work with 0.4 nozzle. I had access to grey PETG, yellow…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Applications and Impact: The Dice Box 2.0 is designed to assist individuals who lack fine motor skills in playing dice-based games. This product allows users to play in an independent and different way by eliminating the need to pick up…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
These are 3D-printable eyes with eyelashes designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes are sized to press gently into Bunchems without glue, making them reusable and safe for creative play.…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
The original parts are prone to breakage, esp. the PG ones.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am a cyclist. In fall and wintertime, when it's foggy and wet, I like to hang up my gloves, scarf, hat, etc. after cycling. That's why I designed this special hanger for accessories. Version 1 only has hooks on which you can hang…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
My Wabeco F1210 mill got some threaded holes on the side (for a measurement-system). - So why not use them for mounting a toolholder for the spindletools, brushes and other accessoires?
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Input Shaper needs to be calibrated from time to time. This is necessary after changing the installation location, adjusting the belt tension, or changing the area around the Nextruder.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Mounted with 6mm dowel and 4x50 screw. Printed with supports under bayonet.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
A practical set of 3D printed holders designed for the Xiaomi X20 robotic vacuum cleaner. The holders provide convenient storage for replacement dust bags, mop pads, and a floor-cleaning solution bottle. They can be mounted on a wall or…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Ceci est un accessoire pour éviter de tenir le boutons de la perceuse ou quand nous avons pas la place de passer la main
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Diglett from pokemon quest I spray painted the nose and base and printed the singlet and the white and black parts each color separate in file other then those spray painted.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I wanted to upgrade my quad's headlights and indicators from the originals to these: HIGHSIDER pro Headlight Dual-Stream Next LED https://www.highsider.de/produkt/highsider-dual-stream-next-led-scheinwerfer/ Kellermann Rhombus S Dark LED…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Make your life easier with "Putter Buddy" featuring a quick connect putter grip attachment that makes it easier (no bending down) to retrieve your golf ball from the golf greens cup. This attachment consists of a retriever with line…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…
Support the designer: Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the…
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
Screen Accent for the Elegoo Centauri Carbon.
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
Some Requires supports please join my discussions group https://www.printables.com/group/kaleb08-upcoming-models-oQJxrGR
🖤 The Honest Shelf // Vol. 10 🤍 Elevate Your Space with Modern Floral Wire Art ✨ A set of three elegant, continuous-line flowers designed to bring a sophisticated, artistic touch to your home. Part of a collection focused on high-impact,…
This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…
I have created a set of accessories that will help you organize and improve your workflow. All stl models that contain the "festool" logo have the logo incorporated, which can be divided into parts for multicolor use, or split into…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Introducion The compact and lightweight design of the Mini 4 Pro makes this drone great for travelling. Sadly, there was no safe way to transport it - until now! The Basics: The complete set contains three types of boxes. They are…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…
Summary This is a 1:24 scale model of a waste bin / trash can in a kit card style. Versions The complete sets are available in a 3MF file for a one-color print. There are 3MF-files with predefined colors intended for users of AMS or MMU.…
![Prusa Mini [LPHC] Low Profile Heatbed Cover with 55° angle make M3 screw for z-axis more accessible](https://media.printables.com/media/prints/93132/images/960286_eda91968-971a-4bcc-8536-cf061363b561/image_de6843e2-4875-4814-8d43-491fdd692020.jpg)
