Counting matching models…
NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…
socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
My Main tools are Dewalt for which I am deep into the battery platform. Note: There are 2 versions of the Ferrex platform. examine the pictures to check if this matches. As a diyer, I can't justify buying all professional tools: some are…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
Design These items are made to connect 100mm flexible ventilation pipe to 140mm flexible air conditioning pipe with a clamp. There are also two sizes available. The short variant has a 30mm section to clamp the pipe each end and the…
Add Quad Lock components to your designs! Tested to fit with various first-party Quad Lock mounts and sockets. The universal adaptor should be printed with the support disc touching the build plate, and can be attached to phone cases…
Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 140mm flexible air conditioning pipe with a clamp. There are also two sizes available. The short…
Arduino Ultrasonic sensor adaptor. 2 models: Generic and DFRobot module
Simple slip adaptors to connect your flexible 4" exhaust hose to your Xtool SafetyPro AP2 intake and exhaust.
basically just the og stand for the 13 but all the stuff are together
Just my design for adding brakes to a WPL D12 and including 12mm hex adaptors at the same time. Added a V2 version of the front caliper mount. Gives better clearance from the hex mount as some wheels are thicker than others. Print…
This is a collection of three models to enable a laser cutter extraction vent to my tumble dryer outlet and have the dryer also hooked up. The 80mm to dryer vent fits the output pipe from my xtool D1 pro enclosure and onto my wall vent…
Increase time shooting and reduce bottle/ammo changes with these adaptors
This series of models hope to offer a variety of “swap-to-suite” PS4 thumbstick adaptors for adaptive play. *Will likely be adding more/refining models. Open to suggestions, as each persons style of play may vary. - - - Pinwheel - Basic…
Most people like video games and like to experience new things, this idea may make gaming easier and more fun by installing these parts into ps4 controller to convert the buttons to joystick. This could be new adventure and easier for…
I used to have the adapters magnetically mounted to the charging station, but they never quite stayed there. So i quickly designed this wall mount. It is meant to be screw into the wall, but you can use the step-file to adjust it to your…
Growing mushrooms is fun! with these adapters you can add stuff to a simple fruiting chamber that makes it even more fun! I have included some filter covers here but will be adding a CO2 sensor attachment and a spray attachment at some…
Those are two differents versions of an adaptor that turns your Roland vinyl cutter into a neat drawing machine ! The file named “Bic adaptor for Roland Camm 1 pro.stl” is made to hold any classic bic pen cartridge The file named…
Didn't like that my Aquila S2 direct drive has a proprietary hot end. got a Red Lizard hot end and remixed a design for a Spyder hot end. made the threaded adaptor for the hot end as well as modified the parts fan duct.
I remixed from the original because I took some of the dimensions from the freecad file, and I actually copied the sketch that makes the thread. Designed to fit this cyclone:…
At your own risk - flying toys are dangerous. Treat them with respect. Author provides this for educational purposes only. If you like the idea Hit ❤ like, leave a comment, post a pic of the print. It motivates me to share more of my…
We had a need for some really clean 0-ppm water, without the expense of gallons of distilled water, for a hobby project. We prefer the ZeroWater filters due to the gravity feed design, slow passthrough enabling consistent 0-ppm, and they…
100mm or 4" ducting adaptors to allow you to connect multiple inlets to the one outlet these models have been designed and flow tested in cad to allow for the most efficient flow possible while maintaining a 250x250x250 build volume.…
A set of parametric silicone (or other) tubing adaptors which are customizable and remixable using CadQuery ! Category: Parts
These shrouds/ adaptors allow you to use the Insta360 One R 1" Leica and Insta360 One RS 4k “Boost” camera modules with the Insta360 One RS 1-inch 360 camera body. Keep in mind that these two modules are designed to capture 16:9 when used…
This is a remix of the 3D model "120mm Fan To 100mm Pipe Adaptors" by Fyrby Additive, enabling the adaptation of 120mm fans to 100mm ventilation pipes. The remix offers enhanced functionality and customization options for use in various…
Time to dig out the black light from the attic and throw on some Pink Floyd. I remember seeing these as a kid in the late 70's, I tried finding them on Google to use a reference, but couldn't find anything, so instead I recreated these in…
I modeled a few different size hose adaptors for the LizzyDesign Cyclone Dust Separator. I have included 1.25", 1.5", and 2.25" versions that screw into the original design. These measurements are inside diameter of the adaptor. I printed…
Adaptors to fit a 24mm D and F Estes motor in a 29mm motor tube. They come in a 97mm and 70mm version to fit both lengths of 24mm motors.
printed out of petg 25% infill with 3 perimeters .15 structural I designed a solution to hold those specific amazon led lights for the hydroponics tower maybe it could work for other lights as well
I do not trust the idea of just hanging a filament reel over a shaft and letting the extruder pull the reel hard enough to turn it. I prefer having the reel centered on a smooth shaft, turning easily with a light and steady "tug". Here, I…
This is a set of two hose and pipe adaptors to attach a China cyclone (from eBay) to a Festool shopvac (in my case, a CTL Mini (up to 2018)). This also includes a set of attachment parts to mount something onto a systainer or a shopvac…
We made these little helpers for easy mounting of 40x20mm aluminium construction profiles to tool wall systems with (9,7x9,7mm) SQUARE holes as made by BOTT CONTORION KAPPES KRAFTWERK ROCHOLZ VIGOR and many others There are TWO versions…
These pieces are specifically designed to adapt MichalFanta's extended train track set to BRIO and IKEA track pieces. Since I already printed a number of tracks from his awesome set, I did not want it to go to waste, so I created these…
Seagate GoFlex brand backup drive has a removable USB 3.0 base that can be used as a USB to SATA connector. For years I've used the USB for years to copy data from old drives or clone a system by carefully connecting everything hoping not…
Attribution https://www.thingiverse.com/thing:182044 https://www.thingiverse.com/thing:1487286 https://www.thingiverse.com/thing:1597847 Description Use at own risk. Materials and methods R&D in PLA Print in ABS/PET for better chemical…
Ever wish you had a stand that handles strong winds and don't want to lay your boat directly on the ground? Then you can try these adaptors that fit directly on the original DF65 stand. I have designed them differently for prow and stern…
Print the supports in a carbon filament, I used Extruder GreenTEC Pro Carbon @0.16 layer height, full honeycomb infill 15 percent and 5 walls, bottoms and top layers. Infuse the final print with very fluid CA as to make it even stronger…
Print with PETG, 0.16mm layer support required make a hole in a plastic box, then use hot glue to assemble this tube clamp is also working very well https://www.printables.com/model/30104-tube-clamp/files The Bambu Lab file is here…
Here are some 1.25in PVC adaptors that I designed to use on a Cosplay Stand. They are a snug fit. Please feel free to send me any pointers or changes on this design or if you if you think any other type of adaptor would be useful. I added…
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
The Switchbot Lock Pro Adaptor is designed to seamlessly integrate with a single deadbolt mechanism, allowing users to enhance their current locking system. The Switchbot Lock Pro does not provide single deadbolt adaptor in certain…
Antennas, capacitor, camera, GPS and landing gear... and more Custom made for TBS Source One V5 5inch PLA works fine.
Ebb & Flow adaptors to fit inside a fitting like the Hydro Flow 1 inch Drain Bulkhead.
Liked those Oculus mounts made by Boopidoo . But I wanted to hang them on a Skadis Pegboard over my desk. So I designed these adaptors based on chrisb work The headset adaptor is common for Rift, Rift S and Quest1&2 devices. The touch…
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Overview This project provides a comprehensive set of adapters designed to interface with the Marley Rectangular Duct System (150x80mm) . These parts were developed to create a fume extraction system for resin 3D printers like the Elegoo…
Using some cyano glue, some M5 nuts and bolts and these casters you can give your HOL coffee table storage wheels. Can be printed in PLA or PETG. Model contains 4 feet, because, why would you want less than 4 casters on your coffee table?…
Peg set with different adaptors print without support
I found that the nylon tubes would sometimes slip down when using the original tube feedthroughs when loading filament. I designed these adaptors to be used with push on BIQU PC4-M10 connectors. They hold the filament in place well and…
Adaptors for original GW cannons for the Leman Russ tank to fit the Gryphonne turret by Skar84 Category: Vehicles
Wheel Adaptorsx2, RC Car carpet to 12 mm hex, need bolt and nut. Recommend using ASA or PETG for strength.
Mounting Adaptor for Floorabooster 200 Lights to Juliana Greenhouse (and non slip loop) In the fotos below the printed black adapter the mounting parts are shown that come with the "Bio Green Pflanzenleuchte Florabooster 200 120/90/60 cm"…
Pretty self explanatory. If you have some Zippr Zipmounts and want to get a flush fit with your seatpost then these will help. My intention is to use reusable zip ties so that I have a secure but "quick" to release/attach. Category:…
Hasbro refuses to give him his own frame, so consider this a holdover until a 3rd party company makes a frame for him.
Spacers to allow better use of pierce filter columns to collect elutions and washes. It helps suspend the 20mL XL Column above a 50mL Falcon and a 2mL column above a 15mL Falcon to prevent the wash through from touching the bottom of the…
Seagate GoFlex brand backup drive has a removable USB 3.0 base that can be used as a USB to SATA connector. For years I've used the USB for years to copy data from old drives or clone a system by carefully connecting everything hoping not…
Add Quad Lock components to your designs! Tested to fit with various first-party Quad Lock mounts and sockets. The universal adaptor should be printed with the support disc touching the build plate, and can be attached to phone cases…
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
Mounting Adaptor for Floorabooster 200 Lights to Juliana Greenhouse (and non slip loop) In the fotos below the printed black adapter the mounting parts are shown that come with the "Bio Green Pflanzenleuchte Florabooster 200 120/90/60 cm"…
Spacers to allow better use of pierce filter columns to collect elutions and washes. It helps suspend the 20mL XL Column above a 50mL Falcon and a 2mL column above a 15mL Falcon to prevent the wash through from touching the bottom of the…
This is item #609600 from STOKKE®, the owner of the Babyzen Yoyo stroller line. One must have fallen out randomly and I reached out to them. $14 + $10 shipping + tax for these 2 tiny plastic items, so I decided to learn TinkerCAD and make…
This universal holder expands the MT-SYSTEM and has been made for SUNLU reel adaptors for the AMS of the Bambu Lab A1 (mini): version ONE version TWO version THREE The holder can be screwed to a 40x40mm carrier profile with two M5 screws.…
This universal holder expands the MT-SYSTEM and has been made for PRUSA reel adaptors by Rossero for the AMS of the Bambu Lab A1 (mini). The holder can be screwed to a 40x40mm carrier profile with two M5 screws. Material: PETG…
This is a set of FOUR holders to mount the ACERBIS RALLY BRUSH protectors to the bar of your Aprilia SX125. It also works in addition with the mounted Acerbis Rally Brush SPOILERS for even more protection against wind, rain and dust. Of…
These adaptors were drawn up for the flexi spring/ tube to fit into and then be mounted at 90 degrees.
Intro: These are some simple and basic 90 degree adapters that can either be mounted directly to a stage or to a mounting plate already on a stage. They are designed for the Easy Stage Ecosystem (linked below) but the holes are spaced 5mm…
Design Concept This holder is designed specifically for organizing memory cards, sticks and adapters on an Ikea Skadis pegboard. It features modular sections tailored to fit various card sizes securely. Uses Ideal for photographers or…
This uses 20x6x1.5mm magnets. I couldn't find the 2mm magnets for a reasonable price, but in the UK this 1.5mm size is available in neodymium for a very reasonable price from ebay. I had a lot of trouble with the drybox, perhaps because I…
5° angled remix of the adaptors from @Zeeflyboy_341242
These adapters are designed to replace the original center speakers in VAG (Volkswagen, Seat, Skoda) vehicles. This speaker is used: Ci5 M80FM-S3 or Ci5 M80FM-D3 CTR…
Are you also completely disturbed by those non-interchangeable sizes of dust extraction hoses? Nothing fits nothing. I'm done with adjusting regular PVC pipes on the lathe and fixing things with duct tape, so I've made these adapters.…
Dust caps for Quick Disconnect (QD) high pressure gas fittings (often used for airsoft, or for gas boosters for diving gases). Use a cable tie to fasten the 'tail' of the cover to the gas line so you won't loose it when off. Category:…
modified to hold micro sd cards with adaptors, usb and sd adaptors.
Needed a pair of hole-to-hole and nobble-to-nobble adaptors for a friend's son's birthday present so whipped these up quickly. They fit standard brio/ikea train track pieces plus slot nicely onto Duplo/Megablocks.
This is a nut and washer holder for 2020 extrusions. Specially the Brazilian ones that have 8mm groove and are not compatible with standard T-Nuts from china. The mechanical stress is held by the washer and the printed component only acts…
Use this to build yourself adaptors for different hose sizes. Variables for customizer: * $fn - defines how smooth the curves are. Higher values are smoother, but take more processing effort. Max value is 360. Default is 200. * fit - is…
Here is my Dust Drill Catcher with changable nozzles for differnt drill sizes. Print using ABS or PLA, No supports required.
AP375GN - AussiePal Great Northern - Pork 3D 001.stl The AP375GN is a custom-designed adapter for the TherAussiePal can cooler, specifically tailored for Great Northern bottles. This adapter provides a secure fit and impeccable…
Those designs are a series of adaptor to securely fix various tools on magnetic bases. Magnetic bases like those: https://www.amazon.com/Magnetic-Adjustable-Indicator-Holder-Digital/dp/B00L5T2ZA8 are very handy to hold various types of…
Designed to turn a vintage Rosito Bisani grinder into somewhat of a single dose grinder. The hopper and lid fit snuggly into the upper burr carrier of the grinder. There are two chute options, one at 60 degrees and one at 45.
Allows you to use 3 or 4 prong drive-in T-nuts, flanged nuts or standard nuts as wing nuts. The diffrent between the 3 and 4 is just the mounting holes for the T-nuts, other nuts will work on either and the 3 prong is slightly smaller of…
For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m) These adaptors are a very tight fit but this is necessary to take the weight and impacts of the landing gear,…
OK few people require a front brake on a BMX but in some countries bicycles used in public places must have two working brakes to be legal. If you are involved in an accident with only a single brake you it can be difficult to prove you…
![Spool (Reel) Holder System with adaptors [bearings] for 45mm-76mm ID spools (reels)](https://media.printables.com/media/prints/128653/images/1233290_5cfb1f8e-6e7d-4185-bfed-1f820871c179/blackbronze.jpg)
