4,096 models
Made possible by my amazing Patreon supporters! If you like my work and want more models you can support me in Patreon Darth Vader is a fictional character in the Star Wars franchise. The character is the primary antagonist in the…
Print approx. €8.24–€10.07 excl. taxPreliminary estimate for one variant
Vader Skull. Added a version that fast-fixed the hole in the top of the helmet. its called darthvaderskullfixhole.3mf and .obj. Give it a shot let me know how it works.
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
Print approx. €4.22–€5.15 excl. taxPreliminary estimate for one variant
Come to the slightly smaller dark side! Darth Vader for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. Mini 13 Vader needs his troopers. Get the Stormtrooper model here:…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €10.64–€13.01 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
Sized inspired from commercial elastics threader. Easy and quick to print, a must to have in your sewing toolbox. I have added a version with holde to allow cords or round elastics insertion. Can be print in PLA or PETG
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Print approx. €9.69–€11.84 excl. taxPreliminary estimate for one variant
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Print approx. €9.67–€11.82 excl. taxPreliminary estimate for one variant
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Come to the dark side! Minimal Darth Vader skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Stormtrooper model here: https://www.printables.com/model/199583-lucky-stormtrooper UPDATE: Get C-3PO…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Last minute Easter Decor Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Darth Vader's TIE fighter model consists of 9 parts + stand, of which 3 parts are printed with the colorprint function. The sequence of colors is listed under the stl and g-code files. Recommended Print Settings: layer height: 0.15 mm on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
Darth Vader head inspired cabinet Knob I suggest an M3 screw Drill a hole for screw mounting If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
My goal was to create a small minimalistic top loader stand to view my cards, guess it could be used without a top loader, but it's always a good idea to store them protected, and they would also sit kind of loose without one. I have…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Low Poly Vader Skull. Eh. Why not.
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for one variant
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
requires supports one file is keychain other file is original
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
After the success of Pikachonk, I give you Bulbaderp. Tried to model him as printer friendly as possible. Probably works best if you dial up the detail on your slicer, so his little scales are a bit more visible. Enjoy!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
ДЕРЖАТЕЛЬ ДУШЕВОЙ ЛЕЙКИ В ВАННОЙ ИЛИ ДУШЕВОЙ. 2 ПОЛОЖЕНИЯ ЛЕЙКИ.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
The multi-material version of Darth Vader recorder flute, inspired by Darth Vader's lightsaber from Star Wars movies. Print instructions E1: black E2: silver E3: red STL:…
Print approx. €11.94–€14.60 excl. taxPreliminary estimate for one variant
🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
If you've ever soldered header pins to a board, you know it's a pain to get them straight. You can stick the board and pins into a breadboard while soldering - that usually works. But if your board only has pins on one side, the other end…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
vader coaster
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
Introducing a practical 3D model designed for card enthusiasts – the Top Loader Card Holder. This no-fuss design prioritizes simplicity, ensuring your top loader cards take center stage without any unnecessary distractions. Crafted to…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Remixed DarthVader Pen/Pencil Cup from @SDHayes - increased to 120% on base and 115% height to better match StormTrooper companion ( Stormtrooper penholder by mattebarrett - Thingiverse ). Printed without supports on Atomic PLA - used…
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for one variant
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Probably the smallest thing I ever printed. Making individual holes for each pin didn't really work out (possibly because of the material and nozzle diameter) so I decided to make two parallel holes fro three pins each and it works pretty…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
All credit reserved to @axelollars for the amazing 3D model I adapt this model by substracting some matter to make it stand by itself and hold some pencil. It make a great pencil holder for my work desk.
Print approx. €6.34–€7.75 excl. taxPreliminary estimate for one variant
Spare parts for the "Rauch" fertilizer spreader models ZS, ZSA, and ZSN (others may be compatible as well)
Print approx. €6.67–€8.16 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Sunlu Grey PLA Control3d White Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #16…
Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant
Fixed Version Added = Darth3 (1/21/2024) Made with Voronization Online. Voronoization Online (voronator.com) Thanks CubesandCircles for catching the midhead floaters.
Print approx. €24.84–€30.36 excl. taxPreliminary estimate for one variant
This Speed Loader slides over the top of the magazine for controlled movement down the mag for easy loading.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Print approx. €10.78–€13.17 excl. taxPreliminary estimate for one variant
Ornate Tusken Raider Gaderffii Head Stock 1++ inch bore for inserting 1-inch dowel. A Relic Unearthed: The weathered Ornate Tusken Raider Gaderffii Head Stock, once a symbol of power and savagery, now rested amidst the carefully curated…
Print approx. €29.92–€36.56 excl. taxPreliminary estimate for one variant
If you use the Gcode everything is ready to go for PLA If not I use these settings: Infill: 15% Pattern: Gyroid Supports: auto generate w/ overhang threshold set to 1 degree Nozzle: First layer 215, other layers 210 If you have a prusa I…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
I wanted some custom valve caps to protect my car tyre valves. I had used some metal ones before but they got welded to the valve so I wanted something plastic to prevent that but also hex headed so that if it did get stuck I could get a…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Another glue spreader for the festool Domino DF500. I Made it to suit to our glue bottles from Ponal. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a…
Print approx. €3.99–€4.87 excl. taxPreliminary estimate for one variant
Usage, building instructions and materials: NEW !! 2024-10-21 - version 4: experimental new multi-material gears with print-in-place bearing improved design of the main body 1. Usage This is how this device is used to quickly load…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
!IMPORTANT! Download f3d file and customize slots dimensions for your devices. Notebook/Laptop, iPad/tablet and eBook reader stand. Parametric, change slot_* width for your devices. You can modify thickness, height and width. 3mf file is…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for one variant
Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
I designed the electronics case for the Arduino fingerprint reader project in order to facilitate conducting experiments and ease of connection, verification and modification, and not for final use by the user in order to facilitate…
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
I have arthritis that makes it hart to load these clips. I made this loader larger than most would as it is more comfortable in my hand that way. It is for my Beretta 96 Vortec but it should work on any Beretta 96 as the 96 are all 40cal…
Speed Loader for single stack mags. There is a hanging part in the inside and you may need to use paint on supports to create support for that part. You can print with supports on too. Filament - PLA, PETG Infill - 100% (Anything above…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for PETGSource material: PET
Front cover with no hole
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Cardholder for toploader or multiple sizes of tradingcards, slightly angled, for diffrent layer heights,no massiv infill
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Spare parts for the "Rauch" fertilizer spreader model ZSB (others may be compatible as well)
Print approx. €7.74–€9.46 excl. taxPreliminary estimate for PETGSource material: PET
Speedloader for the 9mm magazine for the Keltec PF9. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print it upright with a 10mm…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
BB loader for Air Venturi 1911 CO2 BB gun. Pull down the "BB follower" until it locks like you normally would. Then snap on the BB loader. The loader lightly grips the magazine so it won't fall off, but I still us my thumb to hold it in…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
Du angelst gern mit Präzision und willst immer wieder trotz gerissenen Vorfach in der der gleichen tiefe angeln. Dann ist hier eine Schlaufenlehr mit 3 möglichen Größen für die Vorfachsschlaufe. Schlaufenlängen in 2cm, 2,75cm und 3,5cm…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
A spreader head for your watering can. Use a good brim, because of the low contact.
Double stack 9mm speed loader remix
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
EN: Place the funnel on top of the PTFE tube and you will find it easier to load the filament into your Prusa MINI+ printer. Funnel can be printed without using supports. CZ: Trychtýř nasaďte na začátek PTFE trubičky a hned se vám bude…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
5 Vader ducks with 5 Mando ducks
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Renovacion de los faders de una mesa de luces Grand MA
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A shroud that fits over the standard double-row pin headers and turns them into a shrouded pin header. It has an orientation notch and should fit standard pin connectors. I have generated and uploaded 6- and 10-pin header shrouds, because…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Box für Muniton, sehr stabil, für 20 x 17mm x 54mm Dimension ca 90mm x 100mm, Höhe 60mm
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
I created these for a Monster's Inc. fan's bicycle. Printed with 25% fill and 0.2mm layer height. To get the color changes, I sliced with layer changes at 3.2mm, 15mm, 18.2mm, and 19.4mm to get the color effect and give the eye its look.…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
Pop-up credit card wallet spreader with Tile Slim holder
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
This allows the quick reload of magazines for S&W Model 41 magazines. Just keep the arrow pointed forward so it will catch the follower block. Enjoy. I used a paint pen to color the arrow to make it easier to see. Have a lot of friends…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Wappen des 7. Schnellboot-Geschwader
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Print at 0.20mm Color change settings. Start with White to 3.8 Finish with Black. Use 1 15x2mm magnet. No glue needed just press fit. I tried this one with Ironing turned on and love the results. The longer gcode is with that setting. Try…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Under desk mounting bracket for SD card reader UGREEN 2-in-1 USB 3.0 SD/TF Card Reader https://www.ugreen.com/products/usb-3-0-card-reader-with-sd-tf
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Los carretes que se usan habitualmente son más estrechos que el eje portabobinas. Para evitar que se muevan de un lado para otro he diseñado este accesorio. Es una abrazadera lateral ajustable para el modelo de portabobinas tipo…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
magnetic threader ring or keychain helps run cables and other wires behind walls and through tubes. fits a neodymium magnet dimensions listed on STL keychain version requires a keychain around , feel free to replace keychain with anything…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Small tool to help getting drawstrings or rubber bands through holes: Hook or slot for holding on to rubber band or string. Scale it up in slicer if longer or larger tool is needed.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €7.90–€9.65 excl. taxPreliminary estimate for one variant
Misky na matematiku pro prvňáky. Děti do mističek pokládají objekty v počtu podle čísla na misce. Například si můžete vytisknout, nebo vzít z hraček velké množství kostiček, nebo hracích figurek, zvířátek atp. a do misky s číslem 5 jich…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Wappen des 1. Korvettengeschwaders
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
I made myself a little helper to more easily solder pin headers to sensor boards. The dimensions are perfect for use with arduino prototyping boards. I additionally shortened the pins of a 8x1 male pinheader in combination with a female…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
Supports needed for the overhang - don't print flat side down or the swivel joint won't work. I used PLA, but most any material should work. If you like this design, consider checking out my Etsy shop for more cool prints. Use this link…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Provides shade from your lamp's light. Bulb can easily light things in front of you without blinding you. My desk lamp is powerful, but since I needed it to be higher above my desk, light from it really irritated my eyes, especially in…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Hier wurde ein Kabelhalter für Einzelader-Stromkabel konstruiert und gedruckt, die die Standardhalter im Schwenkbereich der Tür zu hoch aufbauten. Vielleicht kann ja noch jemand so einen Halter brauchen. Es werden noch folgende Kaufteile…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Stand for Kingstone MobileLite Plus SD Reader . Link on reader: https://www.kingston.com/en/memory-card-readers/mobilelite-plus-sd-reader Easy to print no supports.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
One side is for M12 other for M6 4 perimeters 50% infill PETG
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
It covering the four AA battery compartment. Printed with PLA, bend with airgun (110 Celsius) and used for a while. Not perfect, but working model. Cad model included for further impruvement, if you bored. Check our Youtube channel:…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
These holders for 2 or 3 Bonne Maman jam jars are specially designed to prevent the jars from knocking against each other when opening or closing the refrigerator door. To suit all refrigerators, two models are available for two or three…
Gridfinity bin for Sony SD and CFExpress A Card reader MRWG2. 3X3
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
this model of storage is for this speed loader Fx Impact 34 shot .177 Speedloader by puna102 on Thingiverse: https://www.thingiverse.com/thing:6097819 This discussion centers on a custom-designed case that I created, which is compatible…
Print approx. €11.97–€14.63 excl. taxPreliminary estimate for one variant
this speed loader model is for this one please see attachment the link for it created by Thingiverse user benny6 https://www.thingiverse.com/thing:5463950 This discussion centers on a custom-designed case that I created, which is…
Print approx. €11.38–€13.91 excl. taxPreliminary estimate for one variant
Alpinestars Airbag TechAir 5 plasma comes with a testing kit, to use in place of canisters, to test integrity of the bladder. Since all my motorcycle tools are stored in gridfinity, this is a dedicated bin for storing this specific tool.…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Dun Dun Dun dun DUN Dun dun DUN Dun... Now, everyone, stop requesting Darth Vader! He's here! Print him! Be happy! My first memory of…
This is a remix of the popular Modular card wallet by CHKING. I've strengthened the sides a little and added a slick storage compartment on the back which keeps it nice and slim. This wallet version is only for 6 cards. Small magnets can…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Batman. The Caped Crusader. The Dark Knight. Whatever name you choose to call him by he is sure to make the dust bunnies on your shelf…
A mini of Darth Vader. It buggs me that a lot of the minis out there dont make the iconic and fashionable skirt Darth Vader wears! It has the chest and belt prepared for multicolor printing, however due to the size, a 0.2 nozzle is…
Mini Vader Figurine Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
It has been a long journey, but I was finally able to finish this project. Let me start by thanking Steen Winther. His model ( https://grabcad.com/library/darth-vader-helmet-2 ) was the starting point of this remix. 14 months ago I…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. This…
Original part : https://www.thingiverse.com/thing:4352769/files
