279 models
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
A simple mount for a Logitech Streamcam and the Ender S1. Can be printed on its side without the need for supports, with the exception of paint on supports for the cable holes. To attach to the body of the S1 I used M5 x 19mm screws.
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
I was looking for a protection cover that is suited for transporting the Logitech StreamCam. The covers I found were a bit loose and wouldn't stay on the webcam so i designed one with a snug fit and two hooks to prevent it from slipping…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
printed at 99% scaled size to create tight fit on the ESP32-CAM Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Replacement part for: Harley Davidson Shovelhead/Ironhead HAMCAN air cleaner.
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
To save more space, I designed this vertical stand for the Dreamcast. While ideally suited for DCs that are equipped with optical disc emulators, it will also work with ones that still have their gdrom installed. I recommend printing this…
These are the LOOP style case panels for BeamCase sandwich and BeamCase SFF. Instead of multiple panels that are printed in a flat orientation, these are loops that are printed standing up, and come with two different vent patterns, slots…
These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…
These are case panels v3.2 to cover up your BeamCase and give it a unique look. The handles make it easy to carry and also act as feet and bumpers, though alternative case feet are avaliable. These are only the files for the outer panels,…
The Sega Dreamcast is a great console with a controller that had some odd design choices made for it. The most confusing is the controller cable that exits the back of the controller and then attaches to a clip built into the bottom of…
This nut positioner keeps flat square nuts (DIN 562) in their position, so they do not slide around in the Makerbeam XL profile. When adding brackets and other parts to your BeamCase, (or other projects using Makerbeam XL profiles)…
Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament Print instructions Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament
v2 is now available with better, more printable hinges! If your printer cooling or overhang performance is average, please print with .1mm or .15mm layers Dreamcatchers are Native American charms that originated in the Ojibwe culture,…
A Dreamcatcher using single extrusions of filament as strings to create the web. Print at 0.2mm layer height.
Streamcam holder for tripod with joint. You need a threaded insert M3 (Ruthex) and a screw M3x18. The hole below is a core hole for 1/4 inch tripod thread. If necessary, I also have a lower part for the Ikea "Antifoni" lamp. Dismantle the…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
This Model is only the body! It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page! At this time, some parts from…
Wall mountable Sega Dreamcast controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This probably could have been split into…
This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…
The Sega Dreamcast VMU has a battery life problem. It eats CR2032s for breakfast. Changing the batteries involves using a screw driver. It's a hassle to maintain. Features This project adds a battery pack to the VMU that allows you to…
These are braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The X-braces are made to stiffen your BeamCase frame. They are designed to work with Makerbeam XL…
Moon and rose dreamcatcher wallart
This is a cable holder and zip tie point for the BeamCase system or other 15x15mm profiles using m3 nuts. With it you can secure cables in place and it helps cable management. These brackets are designed to work together with the modular…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the…
These are corner braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The corner braces are made to stiffen aluminium frames and fit all BeamCase versions (SFF and…
If you like the design, please consider tipping on Ko-fi . Thank you! :-)
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design. Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts…
Want a great way to customize your Dreamcast without needing to mess with spray paint? Why not 3D-print yourself a custom lid! The lid itself, Dreamcast logo badge, and triangle piece are all separately printable so you can use any number…
This fan bracket is made to add fans to your BeamCase (SFF). It comes in different sizes depending on the fan thickness and mounting position. The bracket is secured to the fan with standard fan screws and then it simply screwed to nuts…
A stand for displaying your Dreamcast VMUs. The VMU snaps into place by utilizing the wrist strap connector at the bottom of the unit so it won't move around or accidently fall over. The triangle emblem piece can be printed separately so…
I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…
This is a bracket to mount a 16mm button to your BeamCase frame (or other 15x15mm aluminium profiles) These brackets are designed to work together with the modular BeamCase ITX case which can be found here . Required Hardware Screws:…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm and 140mm fans. The bracket is secured to the fan with standard fan screws and then it slots into the frame on one side and is screwed to the…
- The one ring that should have been them all- Design Goal Designed a ring for the Prusa Printers flash contest. My goal was to make something nerdy yet simple/elegant, at which I think I succeeded! Printing & size The inner diameter (ID)…
Gdemu 5.20 mounting bracket for VA0 Mainboard
This is an Dreamcast USB-C PD mount. You'll need an pico PSU from e.g. RexusNexus in addition to that an USB-C PD trigger.
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
Simple and fast print of a Dreamcast case emblem that makes it more 3D. I used a 0.25mm nozzle for my print to get cleaner text. Category: Video Games
Logitech StreamCam Lens Cover with an in-place hinge. It can be folded back completely. I printed with a layer height of 0.1mm and the hinge works perfectly
This simple bracket allows you to lock your VMU into the Dreamcast controller and make it extremely difficult to remove. Useful for Kiosk applications or trade shows and conventions. Only works with original Dreamcast controllers and…
Description These foldable legs give your BeamCase plenty of breathing room when in use, but can be folded up for transport. Extended they give 40mm of breathing room, and when folded they only add 11 in height. They fit all BeamCase…
Inspired by Tom DeLonge from blink 182 and my own personal style preferences, this guitar body is a custom design that I made based on the outline of a Fender Starcaster. I made this in to a real working guitar! I cut this model in to 7…
I wanted to showcase my DC console but the angles on my shelves are a little weird, so I came up with this model. It raises the console off the surface by a few centimeters and displays it at a roughly 15 degree angle.
Logitech StreamCam GoPro Mount Snap in place. Tight fit. Not for bike mounts or similar ^^' The lens cover in the pictures is this one: https://www.printables.com/de/model/283582-logitech-streamcam-lens-cover
Logitech streamcam support - 3d print One for the universal Nut (1/4"). Other for direct attach to the cheap tripod.
These are the slide in fan brackets for the BeamCase system. These brackets slide into the aluminium profiles and instead of being screwed to nuts in the profiles which makes them simpler than the other options, but they need to be added…
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
Ladies and gentlemen, I present to you the Sega Dreamcast VMU battery cover! Painstakingly re-created from scratch down to (almost) every minute detail! From the pointless little circles to the battery tab slot to the ever-so-slight angle…
These are HDD brackets designed for BeamCase SFF case allowing to mount 5 HDD, perfect for a NAS build. Miscellaneous: 16 * M3x8 countersunk screws 8 * M3 nut 8 * M3 square nut 20 * HDD screws and rubber grommets I used this kind from…
This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…
🌌🦉🦔🦋 Dreamcatcher Collection - Capture Dreams in Style! Key Features: 🪞 Base Plate Design: Each dreamcatcher features a beautifully crafted base plate that serves as the foundation for capturing dreams. 🌟 Ornamental Themes: Space: Embark…
This handle for the BeamCase system can be mounted anywhere along the Makerbeam XL profiles or between them. They can also be utilized as feet. This handle can be used with a bare frame, or with outer panels, there are two separate…
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins
Dreamcatcher ornament @3DPrintBunny
These are additional case panel sizes for BeamCase SFF and (m)ATX v5.5. The files include panels that are printed as one piece and ones that are split along the length, in a range of size options. Components structure and naming: Each…
Make sure you have a thin non-regular mainbaord.
Slide onto the camera from above. With Logo or without All parts have been drawn by myself. Similarities to other parts by other designers are not intentional and or coincidental. Maybe I was inspired by other designs. If this happened, I…
Dreamcatcher body shaped like a spider web. It may be used in other ways too. Diameter is 150mm but you can scale it up or down in slicer to fit you needs.
I saw a double feed practice round while looking for a snap cap model and really liked the concept but the execution just wasn't there so I made my own. These will fit in-between standard rounds or other snap caps but not consecutively. I…
This bracket is made to add radiators to your BeamCase (SFF). It comes in different sizes depending on the radiator and fan thickness and mounting position. The bracket is secured to the radiator with standard screws and then it simply…
A Z-axis mount for the Logitech SteamCam to attach it to the Ender 3 S1 or Ender 3 S1 Pro. You can use the screw from GreatOldOne . https://www.thingiverse.com/thing:3160367/files Update: The camera occasionally made contact with the…
This bracket is made to add radiators to your BeamCase, there are versions for BeamCase SFF, m(ATX) and Sandwich. It is a simple bracket, that offers a lot of flexibility as the radiator can be moved up or down and forward and back. It…
A new VMU holder design for 2024 has arrived! This one ditches the simple square design of the last one and adopts design elements from the Dreamcast case and VMU to make what could almost pass as an official Dreamcast accessory!…
I have been working on display stands for various controllers and decided to do one for my VMU I printed 0.2mm layers at 15% infill, no supports are required. Category: Video Games
Slight tweak of Jeff Chen's excellent Dreamcast VMU AAA Battery Pack. The bottom of each half was flattened and widened to allow for vertical printing. Supports are still necessary, but fewer are required and they will be easier to…
The best way to store and display up to 10 Dreamcast VMUs or memory cards! Completely redesigned from the ground up, my new VMU holder has slots with a snugger fit, snazzy rounded corners, and a new customizable design for the front. Two…
Just an alternative mechanism that will print in one past with resin printer. More details: https://www.printables.com/model/141672-dreamcast-noctua-fan-mod
A model of Sam Porter Bridges' dreamcatcher from the video game Death Stranding.
EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…
This is modular Dreamcast GDEMU (optical drive emulator) mounting system. It's designed to fit several criteria: Rigidity and sturdiness; Restoration of original airflow; Simple to print (minimal support and overhang); Compatibility with…
Instructions This bracket was designed for the GDemu, the one I had was the recent release from AliExpress, please let me know if it doesn't fit yours and I can adjust the base as required! It's designed as modular system, and the…
This a set of split panel case panels for Beamcase ATX, inspired by the “Loop” case panels for Beamcase SW. This design is specifically made to be printable on a 256^3 bed volume, such as Bambu P1/P1S/X1C. On a printer of that size, most…
Printed in PLA with layer height 0,15mm, no supports.
This is a one to one recreation of the VMU shell based on 3D scans (Scans created by WeskMods: https://bitbuilt.net/forums/threads/dreamcast-vmu-scan.3988/ ) You'll want to reuse all of the original hardware used in the VMU. For the heat…
My Neptune 3 Pro's LED lighting shines directly into my StreamCam, causing a terrific amount of lens flare. So I made asjolund's snap on cover into a lens hood. No more lens flare. --- Fusion 360 files provided in case you want to print…
Alternate print for the Noctua fan mod. Single print.
This external X-Brace enables you to add all sort of accessories to your BeamCase, like camera accessories using 1/4 threads. (in the example image I am using a magic arm to secure my portable screen) This bracket is made to mount…
Mount for logitech streamcam (compatible with gopro accessories)
I made a strong mount to display my Dreamcast on my wall, vertically. It's intended to have some felt material added to prevent scratching the console. Mounts using #6 screws with plastic anchors Print on its back .28 Top Z distance or…
Sega DreamCast Controller Stand + Cable Holder
Simple cap to fit around the lens of the StreamCam. Features: Easy on-off. There's no mount, it's all friction fit. Prints in 2 minutes (use 0.6mm walls - should be one perimeter) Matches the design aesthetic of the cam, without…
A remix of the face plate of asjolund's Logitech Webcam cover which allows the LED which indicates if the camera is live, to now be now visible through the cover. Print at 0.2mm layer height as any thicker and the LED will not show…
I wanted a simple base that lets anyone design their own decorative dreamcatcher style patterns. Instead of printing a fixed design, this ring lets you be creative and make a unique piece every time. It’s perfect as: Wall decoration Kids’…
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
This worked for I made the board a little longer, added a block to the back so the board doesn't move when plugging in and out. also added a top piece so board doesn't move up and a 3mm screw hole…
Dreamcatcher - 2003 3D printable model. Super easy to print. This is a large model, it will take some time and a lot of material to print.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
