Search results: anyc

Sort order

Counting matching models…

P
PrintablesFreshPrints

Anycubic Kobra 2 Max Bed Level First Layer Calibration Squares Aligned with Bed Screws and Brim Test

This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
4,939
Likes
194
Rating
5
P
PrintablesGreenBit

Updated! My Prusa Slicer profile for Anycubic Kobra 2 Pro

This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
2,988
Likes
71
Rating
4
P
PrintablesAdditive Atom

Anycubic Vyper Build Plate Guide

Anycubic Vyper spring steel print bed guide. Makes quick installation of the Vypers stock spring steel build plate. Print snaps into place between the vypers print bed carriage and print bed. This is a remix of thing:5219287 by taka0909

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,260
Likes
183
Rating
4.94
P
PrintablesCrooksUSA

Anycubic Photon Mono X 6Ks Resin Drip Bracket

UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
879
Likes
64
Rating
5
P
PrintablesJonasovo

Anycubic Kobra Go Organizers

The ultimate organizer for Anycubic Kobra Go. Fully uses the profile length on both sides of the printer. Left side is a tool holder with a scrap tray. Right side is a generic deep tray. Print vertically without supports.

Print approx. €14.13–€17.27 excl. taxPreliminary estimate for one variant

Downloads
750
Likes
112
Rating
4.8
P
PrintablesN9

Anycubic Slicer Config Kobra 2

This is a slicer config file for the Anycubic Slicer (tested on 1.3) that will work on any Kobra 2 model. You may have more configurable options but the main settings in this file will help almost everyone. Added Gcode before and after…

Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant

Downloads
534
Likes
27
Rating
0
P
PrintablesNicolai clausen

anycubic kobra test

Simple alignment test, single layer 0.20mm, 0.2mm extrusion width. 200x200 mm.

Downloads
451
Likes
25
Rating
5
P
Printables3dPrintingGeek

Anycubic Photon Mono 4K tiltet build plate drip mount "Colani Style"

Though there are already several similar holders out there, I wanted a special looking one, a little bit like Luigi Colani would have done, with some nice round shapes. Printed in PLA on an Elegoo Neptune X, but should work in SLA on the…

Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant

Downloads
311
Likes
24
Rating
5
P
PrintablesHolger

Cutting Tool for 16mm Silicone Damper (Anycubic Vyper)

A simple cutting jig for 16mm silicone damper which can be used for accurate bed leveling for your Anycubic Vyper. After cutting, the silicone dampers have a height of 11mm. -- deutsch: Eine einfache Schneidevorrichtung für 16mm…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
15
Rating
0
P
Printablesstefancham

Anycubic M5s - fat holder

I printed the parts from Resin Vat Drain Stand for Anycubic Resin Printer M3 & M5s von CL Performance | Kostenloses STL-Modell herunterladen | Printables.com , but there was not the vat holder for M5s. So I designed a new vat holder . All…

Print approx. €5.68–€6.95 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
10
Rating
0
P
Printables3Dprintfun

Extended Anycubic Mega S Legs

These legs are to help ventilation compared to the shorter original legs. I have carpet and I put it on the flore and I need to put blocks under the legs so the fans will work but it's hard to move around, so I made these! You should use…

Print approx. €11.43–€13.97 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
12
Rating
5
P
PrintablesAinon3Dtisk

Anycubic Kobra S1 top cover elevation 40mm

Hello, Today I have for you Anycubic Kobra S1 top cover elevation 40mm . It is suitable for increasing the space for cables and bowden. The elevation is precise and fits beautifully. The side panels can be opened to vent hot air. The logo…

Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
20
Rating
0

Anycubic Mega S Webcam Holder

Take your current print settings but not too less infill

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
5
Rating
0
P
PrintablesOutclass

Filament Haltearm Anycubic Mega S

Da ich bisher keine wirkliche alternative gefunden hatte, die mich überzeugt hat, hab ich mal selber eine konstruiert.

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
1
Rating
0
P
PrintablesDerSton

Anycubic i3 Mega/Mega Pro cooling fan replacement chute for Revo Six Hotend

A Cooling fan replacement chute because the original does not fit anymore if the hot end is replaced with a Revo six.

Print approx. €0.27–€0.34 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
4
Rating
0
P
PrintablesRyan Nolan

Logitech B525 Camera Mount for Anycubic I3 Mega

Anycubic I3 Mega has two pushed out holes on the X axis support box, this bracket snaps in place with out the need for tape or glue. For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the…

Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesmrFenyx

Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo - Bed Alignment Cover

This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…

Downloads
9,507
Likes
790
Rating
4.68
P
PrintablesHami

Anycubic Kobra 3 Filament Poop diverter / Anycubic Kobra 3 Filamentabfälle umlenker

To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…

Downloads
9,342
Likes
530
Rating
4.7
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 UPGRADE plus Kobra 2 pro Kobra max Kobra 2 neo

The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…

Downloads
7,708
Likes
883
Rating
4.69

Anycubic Articulated Cobra

The Articulated Anycubic Kobra. This was a free file given to the general public at the premiere release of Anycubics' new Resin and FDM Printers recently (two of them being the Kobra and the Kobra Max). I obtained this file from the…

Downloads
7,689
Likes
1,428
Rating
4.42
P
PrintablesFreshPrints

Anycubic "SPINE" Cable Chain for Kobra 2 Series printers , Kobra 2 Max , Kobra 2 Pro , Kobra 2 Plus , Kobra 2 Neo , Kobra 2

The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…

Downloads
7,517
Likes
1,178
Rating
4.84
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro Bed Level First Layer Calibration Squares and Brim Test Also works with Kobra 2 / Kobra 2 Neo

This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…

Downloads
6,450
Likes
304
Rating
4.89
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 Pro Kobra 2 plus Kobra 2 max Kobra 2 pro

Quick release adapter for easy hot end servicing. Works with stock fan and duct, but works best with this custom duct: https://www.printables.com/model/724096-kobra-2-fan-cartridge You might need to scale slightly smaller or larger. You…

Downloads
6,370
Likes
536
Rating
4.85
P
PrintablesFlyingT

Anycubic Kobra S1 - Poop Bucket / Purge Catch

Remixed to fill out the holes for faster printing. The holder is reusing the two existing screws, so no extra hardware is needed! 3MF is for AnycubicSlicerNext, 0,24mm, Tree Support included

Downloads
5,599
Likes
355
Rating
4.92
P
PrintablesFreshPrints

Anycubic SNAP-ON Bed Sheet Aligners Kobra 2 PRO , Kobra 2 , Kobra 2 Neo Works with the Strain Relief and Cable Drag Chain

Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…

Downloads
5,504
Likes
601
Rating
4.93
P
PrintablesFreshPrints

" Anycubic Key " Proximity Sensor height tool & Extruder Tension disengage tool & for Kobra 2 , Kobra 2 Max , Kobra 2 Pro , Kobra 2 Neo , Kobra 2 Plus

" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…

Downloads
5,228
Likes
592
Rating
4.96
P
PrintablesJJ Irons

Anycubic Kobra 3 Side Cable Chain for Stock Camera Mount

This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…

Downloads
4,982
Likes
402
Rating
4.24
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 max spool Kobra 2 plus Kobra max Kobra 2 plus Kobra 2 max

Use with this runout sensor relocator: https://www.printables.com/model/701416-kobra-2-runout/files The Minion top spool holder for the Anycubic Kobra Max, 2Max, Plus and 2Plus. Works without hardware but recommended to use with M5…

Downloads
4,892
Likes
443
Rating
4.76

Anycubic Kobra 3 Orca Profile V2 - Tested & Verified with 6 Configs + Heatbed STL

This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…

Downloads
4,845
Likes
274
Rating
4.33
P
Printablesmigrvnes

Anycubic Kobra 2, Neo, & Pro - Top Mount Spool Holder

Print with the flat side down, as shown in the model. This model works for Kobra 2, Neo, and Pro. I have updated the photos to include the proper way to install the holder. This way the spool does not come into contact with the printer in…

Downloads
4,563
Likes
295
Rating
4.95
P
PrintablesmrFenyx

Anycubic Kobra 2 Pro - OrcaSlicer Profiles

Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…

Downloads
4,480
Likes
122
Rating
4.2
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Cable Drag Chain

Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…

Downloads
4,325
Likes
444
Rating
4.95
P
PrintablesFreshPrints

Anycubic Kobra 2 Max SNAP-ON Bed Sheet Aligners V3 works with Strain Relief or with Cable Drag Chain

Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…

Downloads
4,085
Likes
314
Rating
5
P
PrintablesNotorio3d

Anycubic Articulating cobra

This is Anycubic Articulating cobra model Download it and tag anycubic on tiktok

Downloads
3,975
Likes
402
Rating
4.88
P
PrintablesLMaker

Anycubic Kobra S1 - PTFE Guide and Protection

PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…

Downloads
3,931
Likes
423
Rating
4.85
P
PrintablesBrotDasBernd

Anycubic Kobra 2 Max Orca Slicer Profile

Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…

Downloads
3,880
Likes
94
Rating
5

Anycubic Kobra 2 Neo PrusaSlicer Profile V2

This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…

Downloads
3,799
Likes
82
Rating
5
P
PrintablesT B A

Funnel for resin bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others // Trichter für Resin-Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und andere

(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…

Downloads
3,758
Likes
335
Rating
4.88
P
PrintablesFlueRian

Anycubic Kobra S1 Hotend Cover + Fan Duct WIP UPDATE

Now you can upgrade your Kobra S1 with colourful, personalised Fan covers! + Duct Update1: Many tolerances and small details fixed, added hooks for the Duct, added Duct and tested both for compatibility and durability. i recommend using…

Downloads
3,660
Likes
384
Rating
4.64
P
PrintablesFreshPrints

Anycubic Dial Indicator Mounts for Kobra 2 Max , Kobra 2 Pro , Kobra 2 Plus , Kobra 2

These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…

Downloads
3,170
Likes
260
Rating
4.56
P
Printableszpin

Anycubic Kobra S1 Left-Side Steep Poop Chute with Bin

Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes

Downloads
3,137
Likes
177
Rating
4.33
P
PrintablesPrintForge

Easy-Thread 72mm to 52mm Spool Adapter for Bambu AMS Lite for Sunlu+Anycubic+Crealty

This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…

Downloads
3,094
Likes
193
Rating
5
P
Printablesdarkamikaze

Tool Holder for Anycubic Kobra

Tool holder that fits the tools provided by the Anycubic Kobra. It also has a place for calipers and a small container for anything that can fit in it (I store a multi utility tool on it)

Downloads
3,088
Likes
257
Rating
4.73
P
PrintablesDarian

Anycubic Kobra 2 Neo Orca Slicer Profile

This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…

Downloads
3,053
Likes
99
Rating
5
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Print Head Mount for Kobra 2 Pro , Kobra 2 Max , Kobra 2 Plus , Kobra 2 Neo, Kobra 2

Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…

Downloads
3,045
Likes
459
Rating
4.88
P
PrintablesKaminoKGY

Anycubic Kobra 3 Combo Slicer profiles for Anycubic Slicer (PrusaSlicer coming)

Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…

Downloads
2,996
Likes
101
Rating
5
P
PrintablesFreshPrints

Anycubic Kobra 2 Pro & Kobra 2 Cable Drag Chain

Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…

Downloads
2,926
Likes
419
Rating
4.9
P
PrintablesFreshPrints

Anycubic X Axis Cable Clip for Kobra 2 / Kobra 2 Max/ Kobra 2 Pro/ Kobra 2 Plus /Kobra 2 Neo

Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis

Downloads
2,854
Likes
294
Rating
4.95
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Redirection Mount for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…

Downloads
2,810
Likes
303
Rating
4.89

Anycubic Kobra 2 Neo PrusaSlicer Profile

This profile prioritizes fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic results that I have without…

Downloads
2,657
Likes
80
Rating
5

Anycubic Kobra 3 Camaraholder

KameraHalterung Kobra 3

Downloads
2,637
Likes
179
Rating
5
P
PrintablesListudio

Spool holder Top Mount for Anycubic Kobra 3

Update v2 added an updated version . The shortened part differs from the first version by 6.2mm. In the first version, some users faced the problem that when moving the extruder motor could collide into fasteners when printing tall…

Downloads
2,588
Likes
160
Rating
4.9
P
Printablespossebaer

Anycubic Kobra Neo / Kobra 2 Neo Trays

A small tray to go below the heat bed, to catch purge from the hot end. The tray has some kind of studs below that go into the aluminium extrusion profile cross beam. There is enough distance to the rollers that move the heat bed, and you…

Downloads
2,540
Likes
280
Rating
4.89
P
PrintablesTechNZ

Anycubic Kobra 3 - 8 way filament hub v4

this is a complete remake of my previous 8 way colour hub found @ https://www.printables.com/model/970762-anycubic-kobra-3-dual-ace-pro-receiver. This new version includes: A stronger retention cap for less broken clips. A completely…

Downloads
2,477
Likes
214
Rating
4.17
P
PrintablesNordice

Anycubic Kobra 3 / K3 Max / S1 Combo - 5 Port Filament Input Hub V2

Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…

Downloads
2,461
Likes
266
Rating
4.87
P
PrintablesFoxMckraut

Pair of Owls Anycubic i3 mega S

Original Pair of owls comes with the anycubic i3 mega s

Downloads
2,454
Likes
67
Rating
4.83
P
PrintablesFreshPrints

Anycubic Strain Relief V2 Kobra 2 Max / Kobra 2 / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo

This Strain Relief works with your OEM cable bracket. No disassembly required. Just tie wrap and your good to go. Also including a file for clone of OEM bracket, in case you want to change the color to match your new strain relief. The…

Downloads
2,451
Likes
320
Rating
4.89
P
PrintablesFreshPrints

Anycubic V-Slot Dust Cover Kit for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Also Parametric any 3D printer.

All items were measured and model specifically for the Anycubic Kobra2 Max. Just Download and print no muss no fuss. Complete Cover kit premeasured. For any other printers I have included 2 files so you can make your own DIY Route…

Downloads
2,438
Likes
351
Rating
4.95
P
PrintablesFreshPrints

"THE ROOK" Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Max - X-Gantry Leveling Sync Dual Z-Axis

“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…

Downloads
2,418
Likes
296
Rating
4.9

AnyCubic Kobra 2 Pro (or Kobra 2) top spool holder filament holder

Use 2 M4*8mm screws to mount this spool holder on top of the Kobra 2 / 2 Pro to save some space on your desktop. My full review on this printer:

Downloads
2,324
Likes
168
Rating
4.9
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 runout sensor upgrade kobra 2 pro Kobra 2 plus Kobra 2 max Kobra 2

Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…

Downloads
2,237
Likes
264
Rating
5

Recommended Prusa Slicer profile for Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Neo / Kobra 2 Max

To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…

Downloads
2,180
Likes
132
Rating
0
P
PrintablesAlexMu

Fan duct optimised for Anycubic i3 Mega

Videos FULL HOTEND: https://www.youtube.com/watch?v=FDKF7qeqDSg https://www.prusaprinters.org/prints/47884-anycubic-i3-mega-hotend-fan-box-also-mega-s-mega-x This Design fits the original Hotendbox and fan of an Anycubic i3 Mega. Its…

Downloads
2,072
Likes
155
Rating
4.55
P
PrintablesTaable

Anycubic Kobra S1 Door Hinge Seal

Hinge seal for the Anycubic Kobra S1 to improve heat retention Recommended material is PETG, ASA/ABS, PLA Supports are required Total filament used is 2.5g

Downloads
2,045
Likes
306
Rating
4.87
P
PrintablesParagon

Pojemnik Na Kupki / Filament Waste Bin Anycubic Kobra S1 Combo

Pojemnik na "kupki", jedna część mocowana na ścianie tylnej, druga część doczepiana na magnesie. Projekt w formacie STP tutaj, pozwalam na modyfikację, proszę tylko podlinkować źródło!…

Downloads
2,042
Likes
223
Rating
5
P
PrintablesFutureLab

Anycubic Kobra 3 Combo ACE Pro Hygrometer

Hygrometer holder suitable for the ACE Pro from Anycubic. The holder fits the super cheap, round hygrometers that you can find everywhere on Amazon, Ebay or AliExpress. The hygrometer can be read through the lid of the ACE Pro and does…

Downloads
2,021
Likes
155
Rating
4.91
P
Printableszpin

5-to-1 Filament Hub for Anycubic Kobra S1 Combo

This 5-to-1 filament hub is designed to replace the stock 4-to-1 hub on the Anycubic Kobra S1 Combo. While the original hub only accommodates the 4 tubes from the ACE Pro system, this enhanced version adds a fifth port for connecting a…

Downloads
2,008
Likes
340
Rating
4.91
P
PrintablesPolyPrint

Anycubic Live View Camera Case

These are the original models for the "Anycubic Live View Camera for FDM 3D-Printer" assembled into a Blender Project. Printed with “Anycubic Kobra 3” I got the best result with following settings: Preset 0.10mm 3D Photo KOBRA3 Layers and…

Downloads
1,930
Likes
53
Rating
0
P
PrintablesLMaker

Anycubic Kobra S1 / S1C - Tool head cover maintenance

Anycubic Kobra S1 / S1C - Tool head cover maintenance Essential design for maintenance your S1 and S1C. The model is designed to hold the front cover of toolhead for nozzle changes, hotend maintenance... without having to connect and…

Downloads
1,928
Likes
274
Rating
5
P
PrintablesFreshPrints

Anycubic Kobra 2 "Flow Rate Cube" Calibration for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

The flow rate calibration is done in order to fine tune the amount of plastic extruded by the printer. Also known as Extrusion Multiplier , by calibrating the flow rate you can fix issues caused by under-extrusion or over-extrusion.…

Downloads
1,905
Likes
207
Rating
5
P
PrintablesKuba

Anycubic Kobra 2 Neo Printer Profiles PLA/ABS/TPU/PETG (Orcaslicer)

These are the settings I currently use for my Kobra 2 Neo with OrcaSlicer, I will try to update them if I find any good tweaks. In order to use them: -Printer: Kobra 2 Neo V1 -Filament: Any / make your own -Process: Use the processes that…

Downloads
1,874
Likes
36
Rating
0
P
PrintablesAdrianM.

Anycubic Kobra / Kobra 2 / Kobra 2 Pro Toolbox v02

This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the touchscreen area. Print the toolbox in vertical position. Print the inside component in orizontal position. You can check my other…

Downloads
1,811
Likes
220
Rating
4.38
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Bed Cable Support (Split Version)

Brackets to support the heater bed cable from drooping down and snagging destroying itself. Includes a place to use a tie wrap if you wish but don't need it 25% Gyroid infill. Alternative New Version : Anycubic Kobra 2 Max Bed Cable…

Downloads
1,785
Likes
180
Rating
5
P
PrintablesVap3Lif3_MCMXCV

Anycubic Kobra S1 Improved Settings For Speed And Quality

This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…

Downloads
1,755
Likes
90
Rating
4.14
P
PrintablesAndrey Plotkin

Anycubic Kobra S1 – Large Volume Filament Waste / Purge / Poop Bucket

A custom-designed solution for collecting purged filament from the Anycubic Kobra S1. The mount attaches to the printer using the two existing screws—no modifications or extra hardware required. The bucket then slides into the mount and…

Downloads
1,740
Likes
100
Rating
5
P
PrintablesJJ Irons

Anycubic Kobra 3 Rear Cable Chain (For Heated Bed)

This model might not be strictly needed to prevent the wires from being damaged as they are pretty beefy, but having all the wires on the printer match is fun! The design uses 17 ChainLatches, 17 ChainLinks, 1 ChainEnd, and 1 ChainStart.…

Downloads
1,728
Likes
194
Rating
4.7
P
PrintablesGentleTide

Anycubic Kobra S1 ACE Pro Filament Angler (Slim)

Changes the angle in which the filament feeds into the AnyCubic ACE Pro to prevent print errors. Used the idea of the Ace Angler by @bedridden_5744518 but slimmed down the model and changed the curve the better match what's on the ACE…

Downloads
1,718
Likes
208
Rating
3.86
P
PrintablesMeisech

Anycubic Kobra 3 Max version 1 Poop Catcher

I recently acquired the Anycubic Kobra 3 Max Combo. Unfortunately, there's no collection container for the discarded filament. You can place a container under the purge wiper, but with the force with which the poop is ejected, it's not…

Downloads
1,708
Likes
79
Rating
5
P
PrintablesAttaxika

FlashForge AD5X Anycubic Spool Adapter (Flange Update)

I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.…

Downloads
1,702
Likes
138
Rating
4.86
P
PrintablesFreshPrints

Bambu Lab Anti-Vibration Feet for All 3D Printers FDM 2020 4040 frame, Anycubic Prusa Sovol Elegoo Voron Creality

These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…

Downloads
1,699
Likes
407
Rating
4.93
P
PrintablesTechonrye

Anycubic Kobra 2 Neo Top Mount Spool Holder and Filament Guide

After being fed up with the flimsy excuse of a spool holder that came with my Kobra 2 Neo. I decided to make a top mounded spool holder. (I wanted more horizontal space) This Spool holder bolts right into the top center of the frame. This…

Downloads
1,679
Likes
134
Rating
4.9
P
PrintablesRJCDesigns

Anycubic Kobra S1 Poop Chute and waste bin- Vented

A much needed poop chute for the Anycubic Kobra S1 Combo. Vented at the outlet and chassis fan to avoid blockages. Screws into the machine with the original screws. With removable collection bin.

Downloads
1,658
Likes
119
Rating
4.86
P
PrintablesFreshPrints

Anycubic Kobra 2 Max BOLT-ON Bed Sheet Aligners V2 Low Profile with optional Strain Relief

Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…

Downloads
1,632
Likes
167
Rating
5
P
PrintablesHans Klepitko

Holder for a Spool Holder Anycubic Kobra 2

Greetings Printables community, I'm pleased to introduce my first model, developed while acquainting myself with the capabilities of the open-source 'FreeCAD' program. Holder for a Spool Holder: Anycubic Kobra 2 The design of the Anycubic…

Downloads
1,613
Likes
149
Rating
4.73

Anycubic articulated-cobra

Anycubic articulated-cobra is a special stl made for Kobra Series printer Category: Animals

Downloads
1,581
Likes
148
Rating
4.33
P
Printablesjeeffi

Resin vat drainer anycubic photon mono x, 6k , Photon Mono M5s

Resin vat drainer for anycubic photon mono Summary Resin vat drainer Print Settings Printer: Voron 2.4 Rafts: No Supports: No Filament brand: PolyMaker Filament color: Black Filament material: PETG Notes: Resin vat drainer

Downloads
1,574
Likes
153
Rating
5
P
Printablesrobotfriend

Anycubic and Elegoo Resin Funnel

A funnel designed to attach to the top of Anycubic and Elegoo resin bottles. Features: Thread to match bottle Insert to guide resin cleanly into the bottle Ridges to allow filters (such as…

Downloads
1,551
Likes
139
Rating
5
P
PrintablesBento

Anycubic i3 Mega S Slicer Settings

Best: PrusaSlicer(v5 added TPU profile), For custom background go to https://www.thingiverse.com/thing:4091968 EXTRA: S3D profiles (simplify3d) and PrusaSlicer(better), Note: Extruder Calibration (…

Downloads
1,548
Likes
58
Rating
5
P
PrintablesARSA13

Print in Place Articulated Kobra Cobra (AnyCubic)

This is the file that AnyCubic provided to print for their Kobra series of printers launch in March 2022. The STL is the original file. I also uploaded a rotated and scaled the model to fit on the Mini & MK3S+. These versions also have a…

Downloads
1,529
Likes
260
Rating
5
P
Printablestelechubby

Anycubic Kobra 2 Pro camera holder

“Front” model was the first design and it requires screws. “Diagonal” and “side” models slide into the rails so they don't require screws. If your printer doesn't have threaded screw holes these should do the job. Although I designed…

Downloads
1,489
Likes
175
Rating
4.93
P

Anycubic Kobra S1 Bed level shims

I was struggling with my bed gantry being not level, and the Anycubic wiki wanted me to adjust the belt and leadscrews, but that was too much work for the fine adjustment I wanted to make, so I made these little spacers to go between the…

Downloads
1,467
Likes
145
Rating
5
P
PrintablesMartin

Anycubic Kobra Neo fan duct

Newly created fan duct for Anycubic kobra neo. it's about 4th version, it's still not perfect, but much better then stock. Printed with 0.6 nozzle with 0.2 layer height from PLA ( PETG will be probably better ), without supports Just…

Downloads
1,459
Likes
102
Rating
4.27
P
PrintablesTroy

ANYCUBIC KOBRA MAX DIRECT DRIVE (OEM)

Kobra Max Direct Drive uses the original OEM original extruder without buying another extruder allowing you to upgrade to direct drive. Plus, a cut for the cable does not get in the way of direct drive. You may need to get this cable if…

Downloads
1,458
Likes
84
Rating
4.5
P
PrintablesDesignCraft

ANYCUBIC Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of a ANYCUBIC 1kg 199x66mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ANYCUBIC…

Downloads
1,442
Likes
85
Rating
5
P
PrintablesMark Foor

Anycubic Kobra 2 Max Silicon Bed Spacer - Spacers

The Silicon Spacer mod is intended to help flatten/level the print bed by enabling you to vary the depth of each bed mounted screw in an effort to compensate for variations in manufacturing tolerances. Silicon Spacers found on Amazon…

Downloads
1,440
Likes
114
Rating
5
P
PrintablesSrossy

AnyCubic Kobra S1 PTFE Guide and Protection

I remixed this Anycubic Kobra S1 PTFE Guide using Tinkercad. I removed the top side of the PTFE Guide, so I could install it, without having to remove the Bowden Tube that leads to the extruder, which is almost impossible for me to…

Downloads
1,437
Likes
106
Rating
4.94
P
PrintablesFelixoid

Anycubic Kobra 3 filament poop disposer/catcher

A set to catch Kobra 3 poop between the filament changes. It's designed to require a tied installation. To set it up, disassemble the purge wiper and untie the screw that holds the plastic purger guide (marked as X on the second image).…

Downloads
1,435
Likes
78
Rating
5
P
PrintablesFreshPrints

Hotend PTFE Cutter Cutting Jig For Anycubic Kobra 2 Max Kobra 2 Pro Kobra 2 Neo Kobra 2 Plus Kobra 2 Also Included Universal PTFE Cutter

Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…

Downloads
1,428
Likes
233
Rating
5
P
PrintablesHerzZorro

REMIX - Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade

DEUTSCH: Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade Genervt vom ewigem Nacharbeiten des Adapters von RyanMaverick, habe ich den Adapter nochmal nachgearbeitet und den unnötigen Steg herausgenommen. Nun passt der Adapter ziemlich…

Downloads
1,397
Likes
67
Rating
5

Anycubic Kobra neo/go dual Z mod

Required hardware: 1 - NEMA 17 stepper motor (try and get one that's the same height as the original motor 34 mm. if you use one that's too tall it might interfere with the x-end-idler bracket when you try to home the Z) 1 - motor…

Downloads
1,364
Likes
220
Rating
4.91