187 models
Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
A super easy print to keep your battery away from the gears on your Redcat Ascent. Here is where I installed it: No supports needed. I printed in PLA and it worked fine!
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Its a Bookend for Bookworms or fans of the Light Novel/Manga/Anime Series: Ascendance of a Bookworm By Miya Kazuki
Print approx. €6.38–€7.79 excl. taxPreliminary estimate for one variant
kolíček pro zajištění vlasce žaluzie v rámu okna
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Extended shock tower to allow more adjustability of the upper shock mounting location. I am personally using them with the Injora 59mm shocks, but there are enough options that the stock shock should work just fine and allow the shocks to…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Modely vytvořené v software SketchUp. Obsahují koncovky vedení vlasce běžné okenní vnitřní žaluzie, která se často láme a k tomu odpovídající boční kryt v žaluzii, do které je třeba toto vedení zasunout. Díl vedení je vybaven otvorem, aby…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
As the Redcat Ascent 32 was launched, nobody made aftermarket wheels for it - so I created the replacement hex that converts from the Ascent 32 axle up to the standard hex size for 1.0" wheels. I printed in PLA on my Elegoo Neptune 4 Max.…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Průchodka vlasce proti jeho předření přes plechování žaluzie
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Drawing of Ferdinand from Ascendance of a Bookworm. Image was drawn by the novel illustrator, You Shiina. Made using HueForge Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap…
Print approx. €8.04–€9.83 excl. taxPreliminary estimate for one variant
The Ascension of Jesus.
Print approx. €17.31–€21.15 excl. taxPreliminary estimate for one variant
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
rollbar and flatbed for the ascent use the shocktower mounts to secure the bed, rollbar screws in the bed with 3 2.5x10 (reused screws from the ascent) supports screw in the rollbar with 2 2.5x10 (also reused screws)
ASCEND DP17 glock 17 magazine cap can be fited on all glocks Please if you make it please upload your make
Inspiration taken from this CSGO planter: https://www.printables.com/model/58274-counter-strike-mirage-planter-turntable it's not 1:1 scale but its close enough. I noticed a bunch of floating stuff in the pictures and fixed the model.…
Screw-In Anchor Cable Zip Tie Mount 6 / 10 / 20 / 30 / 40mm - Fissaggio fascetta 6mm 10mm 20mm 30mm 40mm 29/12/2025 Update: added 6mm version All our designs are free to download and use—we believe sharing drives innovation. Your support…
Tamashii: Chronicle of Ascend is an Awaken Realms Lite game with a cyberpunk aesthetic and scenario-driven play sessions. Wanting to keep all the content together in the smallest space possible, I've created an insert that gathers the…
Small storage to stow away keys, spare fuses, cash or other small items. The printed part attaches securely to the driver side Fuse panel lid part# 66135AJ020. Subaru uses the same fuse lid part# 66135AJ020 on its various other models…
low profile shock tower redcat ascent
An artistic sculpture. It was designed as a Christmas tree ornament but could be used for other purposes. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer.…
Description 2023-2024 Subaru Ascents have 19 cupholders. All of them are too small for my 40oz Thermoflask container as well as most soda fountain cups here in the United States. The cupholders between the driver and passenger seats have…
The trophy features two contrasting parts that interlock in perfect harmony. The base is a minimalist metal cube, culminating in a stepped design. Above it rises a complex polymer structure, organic and asymmetrical, continuously…
flatbed for the redcat ascent. use the 2 shocktowers to srew in place
Es una llave para poder abrir la puerta exterior del ascensor. Esta llave es mas alargada que una llave normal.
Imported from Thinkverse without modifications. All credits goes to user Kest430 . The rock ascending is too steep for electric train! I printed with little support, but it's probably not necessary. Infill: 20%
2020 Aluminium HEX T slot twist in Zip-Tie Mount Support V.2 Supporto per Fissaggio Fascetta Suitable for: 20x20mm extruded aluminium https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
2020 HEX T slot twist in Zip-Tie Mount - Supporto per Fissaggio Fascetta Suitable for: 20x20mm extruded aluminium https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…
A stand for the Redcat Ascent 18. One piece version but also included the single stand if that is your preference. Some notches on the bottom for rubber feet.
print 2x need to mirror 1 in the slicer need 2x 2.5mm screws and 2x 2.5 nuts near the slider.
An artistic sculpture. It could act as a shelf sculpture, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or download,…
Printed in Petg Rear shock towers, v3 has more mounting options
This is a MagSafe adapter that fits in the small tray above the shifter on the 2023 generation Subaru Ascent vehicles. It has a wire storage system build into the base so you can adjust the amount of cable length exiting the back of the…
Print this model as is with supports. I ended up using a brim on mine to keep the edges down during print. It's designed to fit this charger:…
Based on the excellent #NoWalls dungeon tiles by TheRooster, and the OpenForce Half Height Spiral Stair with only minor adjustments to reduce complexity Category: Toy & Game Accessories
Type 1 tokens (not pictured) are compatible with the manual multi-material method. It's a lot of work to make a full set but I did it. Type 2 tokens (pictured) are intended to be used with a 5 filament multi-material solution. I used a…
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…
I designed this ultra-light canopy specifically for the Walksnail Ascent Lite Kit for TinyWhoops and Toothpicks . Since there are currently no other canopy options available for this kit, I decided to upload my design to fill the gap for…
A parametric remix of the "Nvidia DGX Spark - 10in rack mount" by Dan Marchenkov, re-worked so a taller ASUS Ascent GX10 (GB10) fits — it does not fit the original tray. Both parts (the main tray and the backing plate/bracket) were…
👑 Goblin King Ascendant Small humanoid (goblinoid), lawful evil Armor Class 18 (regal battle garb) Hit Points 135 (18d6 + 72) Speed 30 ft. STR DEX CON INT WIS CHA 12 (+1) 18 (+4) 18 (+4) 14 (+2) 16 (+3) 22 (+6) Saving Throws Dex +8, Wis…
UPDATE: New exploration box fits sleeved cards - no lid needed since there won't be a gap between the top of the box and the game box lid. Other trays are not designed for sleeves though, only the new exploration box! DETAILS: There is…
Printed this model in PLA+ but any other filament should work as well. I used M2.5*12mm screws to secure vrx and M3*40mm to connect two parts.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
this a design that I made for the Virtue Vio Ascend. but it could be compatible with more models form Virtue. that share the same lens system. you may look at the mount and think that covers a lot of the vent holes. and that is true I did…
as requested a "deep bed" for the scent
Works as a combo with the top mounted cooling duct
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a cooling base for the ASUS Ascent GX10 , a GB10 based AI computer. The device typically runs very hot under load, and I would like to increase its life by helping it with cooling. In my tests using a constant…
I ran with 4 walls and 25% infill but I'm sure it would work with other variations.
MT Ascent - Adjustable Height Model Turner / Work Table This is a print in place, Quick Operation Height Adjustable version of my original Model Turner, the adjustment range is 135mm to 200mm , the base can be used with all my other Model…
I really wanted to print an insert for this game because the base one that comes with it is awful but there were no retail / all in gameplay pledge size inserts. However with a little tweak to Hextra's miniatures insert I was able to make…
Pipe Clip fixing for pipes and conduits Ø 16 / 20 - Fascette di fissaggio per canaline e corrugato For quick installation of: RNC conduits Flexible & rigid tubing No screw needed Drill hole Ø7 / 8mm insert and fixes pipes and lines…
A drop-in cooling stand for the ASUS Ascent GX10 (NVIDIA GB10 / DGX Spark family). The GX10 pulls intake air through its perforated bottom plate and exhausts out the rear. It can run into thermal limits, throttling & crash with sustained…
Heavily inspired by some images from 2008 i came across on the net i have been wanting to 3D model and build this for many years. I've been working on this for nearly 2 years in odd moments when i have time Update2 > uploaded the…
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
The stock Redcat Ascent 18 battery tray doesn't give any room to access channel 3. This is a copy of the stock version with a notch to make it easier get a connector into channel 3.
CZ: Hlava hříbku průměr 9 mm a výška 1.2 mm, kolíček průměr 3.2 mm, průměr díry pro vlasec 1.6 mm (zvětšeno oproti originálu kvůli možnému zalití v první vrstvě během tisku), celková délka hříbku 11.2 mm. Tištěno z filamentu Prusament…
Meet Morvath the Hollow Ascendant , the corrupted elder who stands as the perfect rival to Eldran in the Battle of the Elders series. Morvath features a dramatic stance, flowing layered robes, and a sinister staff topped with a horned…
I have a small form factor version as well. Get it here . Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Screw VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Holder…
il modello va stampato con infill 100%, 3 perimentri, 3 top e bottom layer utilizzando tpu a95
Lower the ride height and soften the suspension on the Ascent 18 with zero preload lower cups. Print at.16 or lower from ABS, ASA, PETG, ETC.
Remove body attached retention hardware and glue in tailgate badge. Relocate control box. Replace front and rear frame spacers using original hardware and holes. Glue in 10x2mm magnets. Glue top pieces to body shell using lower magnets to…
The Ascent OC is a safety razor with a high-flex blade design that accommodates the simple but proven method of adjusting the shaving efficiency by simply turning the handle, which reduces the blade's flex and, in turn, increases the…
All expansions, retail Starbases, escalation packs, and race dice, along with the base game: organized and fitting inside the original game box. Circa 2024, covers Base Game to Dominion expansions. PLEASE READ THE PDF OF THE LAYOUT TO…
I had made all of the Star Trek Ascendancy box organizers for the game thanks to westph21 on thingiverse https://www.thingiverse.com/thing:4386391 However the new expansions are not supported and despite another maker on thingiverse…
A nice wall mount for your home ASUS Ascent GX10 LLM server. This mounting bracket can be mounted sideways and top down depending on your needs. There are little nodges for the feet so the GX10 will not slide out.
I am not sure why or what part is missing from my Subaru Ascent passenger side windshield wiper arm sprayer. Mine is now shooting everywhere except the windshield. I can spray people on the sidewalk and cars to my left and behind me. I…
Poznámka: Český popis naleznete níže. Description A simple fishing line winder for a drill , designed to make handling fishing line easier when maintaining fishing reels. The model consists of two printed parts and a bolt that allows it…
The OEM lid floats like a rock. This is a simple replacement lid.
Designed using Blender. Has .2mm tolerances in between the pieces. Printed in PETG with no supports on an Ender 3 S1. Holes for 2mm rods to keep crate together. I used paperclips with mine but had these in mind at 150mm and 300mm with the…
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…
Blade replacement wrench for Vitamix Ascent series containers.
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body Lite+ with 2 of the short screws included in the kit. The Cam-Top attaches to the Body with 4* M3…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission…
An interesting design based on an octagon. It is designed to print without supports. If you collect or download, please "Like". _________________________________________________ The resin print is available for purchase at the following…
Printed in PLA with no supports on Ender 3 S1 Designed to mount with any two existing bolts for the front enclosure on the Ascend 128x. Have to extend the Stern plug to reach the enclosure.
This is a switch blank for a Subaru Ascent for installing a RedArc Tow-Pro brake controller knob. This is a remix of vvander's design with a cutout for the indicator light and recess for the knob added. Note that the recess requires…
Improve your game and storage with a minimal effort. No need to print a full insert. It should fit exactly the slots without margin. The difference between both models is only a few mm. If you want the same organization as the one shown…
Botones para ascensores Marvi ya vetaranos , se hace en dos colores, primero la parte de los numeros, y despues lo blanco. --Añadido boton LL suelto --Añadido boton PB suelto vean como queda de fino y correcto. How I Designed This…
This is a Caddx Walksnail Ascent Pro VRX mount for the HDzero BoxPro + FPV Goggles New version accommodates top mount as well as front mount, and folds flat for storage/transport. Use the top mount to reduce neck strain but you will need…
Hello everyone, I have vectorised a technical drawing of the Apollo 11 Lunar Module Ascent Stage and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10 minutes! Please note the…
The skin tail strap of my Black-Diamond back-country skins broke ... since this model is no more manufactured and no spare parts are anymore on sale, I designed a replacement part, printed in TPU flexible filament (98A shore). Despite…
A smelter oven to refine ore into shiny pure metal. Comes in 2 sizes and with various chimney tiles.
Built for walksnail ascent camera, best print in TPU Features holes for screws for better camera stability
Apollo Lunar Ascent Stage Drone one small LEM for mankind This little remix of the other LEM drone originally was supposed to fly with the decent section but is too heavy for the drone I based it on. So just the ascent stage flies and…
Replacement weather-proof deck plate storage container for FS10 and FS12 kayaks. (May fit others; see dimensions on drawing.) The tapered edge prevents the need for supports. I used a modifier to print the top ring at higher infill than…
Coliza para los guiadores en ascensores instalados por Incast en Córdoba, coliza tipo LiBRITO en formato cerrado.
I found these dividers for Tamashii on thingiverse made by PolyPusher : https://www.thingiverse.com/thing:6410249 however they were made for a 3MF printer and as such the titles could not be printed on my single filament printer.…
Print laying face down with supports
Quite simply a bookcase/ slipcase for the Ascendance of A Bookworm series Part 1 Volume 1, 2 and 3.
Blank insert for 2024 Subaru Ascent(pictured with redarc trailer controller) for adding switch or other accessories.
Fits a Vitamix Ascent container for removing the blade assembly. Printed in PLA+ with 20mm M3 screws used for extra re-enforcement against shearing - but probably wasn't needed. Rather than printing the part with a handle, I opted to use…
pratico supporto per inserire fascette e ordinare i cavi
I designed and printed a set of mounts to hang my Ruler set I got on amazon from ASCENDTING. https://www.amazon.com/gp/product/B09KKZQQZK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1 I printed in PLA at 100% infill to insure they were…
Insert for left dash that fits Redarc trailer brake controller.
Pair of brackets for the ASUS Ascend GX10 in vertical mode. The two parts attach to each end of the USB-C power supply and create a stable base that allows mounting the PC vertically. Ideal for a computer rack or saving desk space, while…
This is an organizer to fit the Standee versions of Ascension Tactics & Ascension Tactics Inferno into the Inferno box. Print 4 Player boxes and 1 of everything else. Let me know if you have any questions or comments. Category: Toy & Game…
Cup holder adapter for 2023 Subaru Ascent so you can use larger water bottles
This model represents an original ascended warrior in his awakened form, inspired by classic high-energy transformation aesthetics but fully redesigned with unique proportions and sculptural details. The piece is created in a dramatic…
3D model of Rozemyne from light novel part 4 of Ascendance of a Bookworm (Honzuki no Gekokujou) Used MMU painting to make this model. Colors needed are Black, White, Yellow/Ochre, Tan/Flesh and Midnight Blue Print upside down with tree…
