Counting matching models…
Multiple baubles to christmas tree (35 variants and sizes). Prepared for printing in vase/spiral mode - I recommended minimal 0,4 or 0,5 nozzle and set extrusion line width more than 100%. In some parts of baubles (overhangs) i use layer…
Simple snowflake Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page…
GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…
Christmas bauble display stand. UPDATE - I have redesigned the tree and base so that they slot together better Easy and quick to print with no supports Pictured with a 6cm bauble but can easily be scaled up or down. Let me know in the…
Update 1# - I made the top cone have more support from below so it should print more easily, and reinforced the bottom fins. I modelled this in Blender. Print Settings It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
The Design Here's a set of 4 stylish Baubles. They have a diameter of approximately 60mm Let me know if you experience any issues and i can try to help Printing Please make sure the print bed is clean as adhesion is very important.…
Print 0.16mm, might need supports or maximise cooling fan.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
If you want to use it as a keychain, print it in its original size. As a decoration for the Christmas tree, it will be appropriate to enlarge the model to at least 130% (in the X and Y axes). No special print settings are required. Happy…
An intricate Christmas bauble and a bigger version of my Christmas bauble display tree to hang it on. Prints without supports and the bauble and the tree slot together without the need for glue. @3DPrintBunny
Simple angel Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page here:…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Harry Potter Hogwarts crest Christmas bauble Prints without supports, use the provided hook or some cotton to hang it on the tree. I have also attached my large Christmas bauble display tree, seen in the photo, to hang it on @3DPrintBunny
Customizable battery powered Christmas tree bauble. Featuring Snowman and illuminating Lamppost. Print instructions I've designed to bauble to use as little supports as possible. There are only 2 files that require supports: Top and…
Made this design for a simple christmas gift I could give out at work, and post to friends and family. A 2D kit card of a “shadowbox” christmas scene - simply pop the pieces of the kit card and assemble together using the slots to make a…
This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…
I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
I modelised this christmas tree baubles in organic shape, cause I m truly mad fan of this kind of design. I didn't generated print file cause you could print with SLA or FDM printers. In SLA is support free, but in FDM you could try if…
A Christmas star bauble Prints without supports and slots together easily. Download the display tree in the photo here: https://www.prusaprinters.org/prints/46307-christmas-bauble-display-tree @3DPrintBunny
Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…
Vielleicht kennt der ein oder andere mein Problem. Beim Drucken von Filamentproben verheddert sich das 3D Druck Filament und der Druck schlägt fehl. Doch hier nun meine Lösung für das Problem: ein Filamentaufroller für den Akkuschrauber.…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Einfache Dose mit Schraubverschluss. Deckel mit Griffmulden. Kann ohne Support gedruckt werden. Anpassung der Größe ggf. einfach im Slicer skalieren.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
Slot together Christmas tree with hanging baubles. Nice as a table centre piece or ornament. Print without supports You will need to print two sets of baubles or 2 of each individual bauble @3DPrintBunny
Keine Lust mehr die Spanngurte händisch auszuwickeln? Dann ist es allerhöchste Zeit meine Aufwickelhilfe für den Akkuschrauber auszuprobieren. Ich habe zwei Varianten erstellt: Spanngurte von 35 bis 50mm Spanngurte 50 bis 75mm PLA…
These knobs are perfect for making your own star grip nuts or star grip screws. They are designed for metric screws and nuts with thread sizes M4 – M12 . The different versions and their dimensions are listed in the documentation. After…
Print designed for vase print / spiral including hanger (normal print also possible) layer height <0.1mm no supports no infill brim or raft If you have problems with vase printing just print them normally or only scale Z ×2 so it gets…
Klemme bzw. Mini Schraubstock für kleinere feinere Arbeitenn.
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Simple tree Christmas bauble. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page here:…
Druckempfehlungen: 0,2 mm Layer, 25 % Infill, Kontourhüllen (massive Schichten) Standard-Einstellung. Keine Stützen. Schraubenlängen 6 und 8 cm (Höhe ohne Teller) Ergänzung vom 25.05.2026: Aufgrund der Hinweise in den Kommentaren habe ich…
Schlaubi Schlumpf Brainy Smurf Glasses Holder If you like it --> press like it :-) Remix of this model https://www.thingiverse.com/thing:3058136 which was designed by Sangallo_Designs . Optimized the mouth, the surface that it is more…
None of the saw guides I found on printables had a proper clamping feature, so I added my version which has 2 cutouts fit for small screw slamps. I use Bessey 100x50 clamps. Suitable for 1mm thickness saw blades (slots are 1.2mm wide)…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
This snowflake pack includes 23 unique snowflake baubles, perfect for decorating Christmas trees, gifts, or winter projects. ❄ Default size is ~50mm The set comes with two size profiles: small flakes at around 50 mm and larger flakes at…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
(26.09.23: step-file added) While searching for a mount for a Dremel 3000 on Thingiverse I unfortunately didn't find a suitable one for me. Either the construction plans were for another model and didn't fit or a bracket did fit, but…
A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
A (part of a) 3d printed Mini-Universe for your Christmas tree – or year-round decoration. Each planet, moon or star is scaled down to an average diameter of 90mm. That results in a scale of 1 : 141.733.333,3 cm for the Earth 1 :…
Eine kleine Anleitung befindet sich bei den Downloads. Kann auch mit kleineren 3D Drucker gedruckt werden. Viel Spaß :D A small guide is located in the downloads. Can also be printed with smaller 3D printers. Have fun :D
A elegant vortex style crystmas bauble. You can print both parts seperate with your single extruder printer and assemble it together. That means that you have the two color look without the material waste of a multi filament system! I…
Beide Teile sind in einer 3MF Datei. 2 Versionen: Eine komplett geschlossene sowie eine Version mit Löchern zum durchfädeln eines Bandes zum umhängen. Die Kugel wurde für ein Köstum als Froschkönig konstruiert. Both parts are in one 3MF…
Supports and Raft required, If using "Auto-Support" please make sure to remove any supports from "within" the articulated links to make movement of joints smoother and easier and to prevent any fusion.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Set of Christmas baubles, printed in vase mode, no infill. Add brim or watch out for model fall. I printed without brim. There is a version with no hole to glue the topper attached on, and second with hole for hanging already there. You…
Vacuum cleaner nozzle for Miele. I built this as an additional nozzle because the original is too short and too thick for cleaning the car between the seats. Category: Replacement Parts
A slot together starry Christmas Bauble display tree. Prints without supports. With two base options.
This is a replica of the dust cap with O-ring groove of an Apeks DIN regulator. This model was created after my buddy lost the dust cap for his regulator and was unwilling to spend around 10 euros on a piece of plastic. For me, that was…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
inside diameter : 43mm and inside diameter : 57mm outside diameter : 57mm and outside height : 81mm capacity for ~50-100 Q-Tips
This is a remix of 3DMaker's F-clamps Rack, in this version for mounting on a wall. Das ist ein Remix des Schraubzwingenhalters von 3DMaker, in dieser Version zur Montage an eine Wand.
An .stl of the Auburn University logo. I recommend using ironing on both of the horizontal surfaces and adding a filament color swap to your gcode. I used Hatchbox orange PLA and ERYONE matte navy blue PLA for the pictured prints.
Print all pieces and glue it together. Use transparent filament for the porch/veranda roof for the best appearance. Door and window frame with 2x in filename will be needed twice. Can be painted before or after gluing. I printed it with…
-German: Ersatzplastikabdeckungsdingelchen für Baumarktbilligdrecksschraubzwingen -English: The plastic covers for those clamps are bad and terrible and break easily, so I designed some new ones. I printed those with TPU (REQUIRED - or…
TL;DR Tool to hold a screw on top of a bit in two sizes for short and long bits. Long story Evolution of a functional 3D model Saw this and thought i could made much cheaper ones First version was to brittle for PLA (worked with PETG and…
Few simple models on base of spiral Model names are shown on the render ‘Full’ models are much easier and faster to print The rest may be difficult, especially on bowden printers Supports are needed only for the base. Use support blocker…
This is a snowflake bauble surrounded by three ring. it is easy to print with no supports. It prints flat and then each piece clicks into place. Hang it using the hook provided or some cotton. See my Christmas collection, including the…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
An easy to print version of Christmas Bauble that can work either all white or Multi Color print. Can also be printed in
Prusa MK4, Prusa Slicer X-Achse 30° gedreht, Düse 0,4 mm, Layer 0,15 mm, Raft 3 Layer, Support Stützen nur auf dem Druckbett
Darth Vader Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…
Schraubendreher Tischhalterung passend für eine Wera Big Box.
This is Universal ornament hanger. It consists of two parts - cap and hook (hanger?). Cap is designed to be printed in spiral/vase mode. Original file is pretty small with internal diameter of 7mm or so (depends on extruded line width)…
Material: PETG / ASA / PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Siehe auch / see also:…
Stelle hier eine Turteltaube zur verfügung, bekannt aus dem Film Kevin allein in New York. Provide here a turtle dove, known from the movie Home Alone 2: Lost in New York
Eine Schraube mit rundem Gewinde und dazugehörige Mutter mit gerendelter Oberfläche zum direckten Drucken. Brim und Stützen sind nicht nötig. Ich habe nun diese Schraube in Petg (schwarz) und PLA (Gold perl) gedruckt die Schwarze mit…
For best results print with a .8 nozzle at .6 layer height in vase mode for a robust bauble that will print in ~20mins and use very little material. This was designed using Slice-Up which is a tool for directly generating gcode so was…
Dear 3D Printing Community, In light of the ongoing conflict in Ukraine, I have designed these combs and would like to introduce them here. Each comb is adorned with a dove of peace, serving as a symbol of hope and peace. With this small…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Ersatzteil für verlorene Radschraubenkappen für die Sechskant sowie Sicherheitsschrauben. Wenn zu locker oder zu stramm, dann einfach um ein paar Prozent größer oder kleiner skalieren. Perfekt passend bei meinem Golf 4. Replacement part…
Ich habe ein Ersatzteil zum abziehen der Schraubenkappen vom Radbolzen entworfen. Evtl. kann es ja jemand gebrauchen.
Christmas Tree Decoration Bauble set of 10 Designed to be printed in vase mode.
Antrieb für 6-Kant Schraube oder Mutter um diese Werkzeuglos betätigen zu können. Hierzu einfach die Schraube bzw. die Mutter in den 6-Kant eindrücken und dann verwenden. Hier ist ein ganzer Satz verfügbar (M3, M4, M5, M6, M8, M10 und…
Halterung für 4 Tellerkopfschrauben für die Camplightz Federrute. Material = PETG Wände = 4 Infil = 25 % Gyroid
Small wrench for AdBlue lid Fits for Audi A6 and others Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: Prusament PLA Yellow Category: Automotive
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Dieser Schutz passt in fast allen europäischen steckdosen. Dient zum Staub und Spritzwasser Schutz z.B an Spülbecken. Gedruckt habe ich das ganze aus PETG mit einer 0,4mm Düse und einer 0,2mm layerhöhe.
Meiner Version eines DIN45 Schraubverschluss. Passt auf ein 5L Isopropanolkanister. ________________________________________________________________________________________________________ My version of a DIN45 screw cap. Fits on a 5L…
Just designed my own Dyson V6 drill dust vacuum nozzle.I know there is a lot in the community, but every model looks a bit different. YOU should try to figure out which fits best to you. The photographs show a two-color built. The reason…
Dies ist eine Ersatzschraube für den Rattan Gartenstuhl Allibert by Keter. Ich habe diese Schraube in Fusion 360 erstellt und den schwachpunkt ( den Ausschnitt in der Schraube) weggelassen. This is a replacement screw for the outdoor…
DE: Fein- und Fugendüse für Staubsauger mit Rohrdurchmesser 35mm. Ideal für Fugen oder enge Stellen. 2 Varianten verfügbar (abgeschrägt und gerade) Optimaler Druck: -Schichthöhe: 0.3mm DRAFT -Rand: Ja -Stützen: Nein…
M12x1.5 nut M12 cable glands need a 17mm wrench for the nut and a 15mm wrench for the gland itself. If you're operating in a tight space, a 15mm nut might help! If you need a specific size and you're not into FreeCAD that much, let me…
Spiralised bauble that i modelled on Fusion360. The hook is universal with my other Christmas models, and it should just click on but sometime a bit of glue and/or sanding may be necessary depending on your printer's quality. I recommend…
Schraubendreher Halter für 4* große Schraubendreher 10mm Schaft und 8* 8mm Schaft. Optimiert für Wera Schraubendreher. Erweiterung zu…
Spardose mit Schraubdeckel! Ich habe sie durchsichtig gehalten um den Füllstand besser zu sehen! Ich habe die standard PrusaSlicer Parameter für PLA verwendet. Langsameres drucken erhöht die Oberflächenqualität! Druck: Düse: 0,4mm…
![Nut M12x1.5 [cable gland, Kabelverschraubung M12 x 1,5]](https://media.printables.com/media/prints/58596/images/5534175_4e949048-6d70-41c7-b47b-372342e3b1c0_b1030ddb-1236-4693-8475-29de9026c4d1/img20240103190349.jpg)
