Counting matching models…
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…
Update I made a new mounting cover for the Rosahl MDL-3 membrane, which uses a standard gasket instead of the rubber o-ring and is simpler to assemble. Also the gasket frame fully covers the interior of the case, hence is more protective.…
Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Meet the Mini Optimus Tesla Bot - a one-of-a-kind figure I designed, based on the legendary Dummy 13. This isn’t just a decoration - it’s the perfect collectible for any robot fan, not just those who admire Tesla! Update: 07.02.2025 -…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
The parent design is good, but I wondered, could I use about the same amount of material, but make it stronger/better ? The answer, thanks to Fusion360's generative design inspiration and stress analysis is yes! I hope this improved…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
I roughly based the aircraft off of the American F15 Strike Eagle.
Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…
This version of the printer is outdated. Please have a look at: https://www.printables.com/model/572689-the-100-the-fastest-3d-printer-based-on-a-printed- Description This is THE 100, the fastest 3D Printer based on a printed frame. It…
This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…
These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…
This model is a 4DoF KUKA-based robotic arm replica designed as a single-piece print. Inspired by the original KUKA industrial robots, I created a scaled-down version that captures the look and proportions of the real arm while being…
Artistwings ( https://www.thingiverse.com/Artistwings ) created these pieces as a counter part to the pieces created by Zorum ( https://www.thingiverse.com/Zorum ). Unfortunately they don't match the Zorum pieces in size and have a…
This is a crank driven manual (non electric) WDT tool. It helps get rid of clumps in your coffee basket and evenly distribute coffee before pulling a shot. 3D printing settings: My tool was printed with ABS+ @ 0.4 nozzle, .2 layer height.…
I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…
This is an OpenSCAD library to generate an ergonomic handle that distributes hand contact pressure as evenly as possible, for any size of hand. The dimensions in this model are based on several research papers using anthropometric data…
This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to finish the build, it is definitely possible to print…
An optimised part cooling duct for a Creality S1/Pro/Plus using the Creality Sprite extruder to maximise airflow and reduce back pressure on the 5015 fan. It is a remix of the hero me gen 7 single 5015 fan duct to make it fit for a…
Simple bicycle tire lever based on the design of the now obsolete Park Tool TL-4. There are many different types of tire levers out there, but one of my perennial favorites was the Park TL-4. It was simple, had a nice minimal hook which…
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Some time ago I printed a box for crimping tool and ferrules - functional, but rather simple. However, I wanted something more stable and so I turned the idea into a case based on the Frog Box v2.0 . The box has a compartment for the…
I've always had a fascination for astrolabes and decided to model a highly detailed one for myself. After an abundance of research from museum databases, I designed this one based on several Medieval artifacts, as well as later ones from…
RECENT UPDATES January 13, 2024 Licensing has been updated and opened up to BY. Moved old updates to the bottom of the description to keep intended information up top. Added a zip file (Modular Pallet Rack Base Kit Step Files (No Panels))…
I always like a nice mechanism and with 3D printing you can create a lot. Based on some examples from the internet I have designed my own model. It was a bit of a hassle to get the dimension right but after the second print I was very…
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
DC UPS based on LX-2BUPS module (5V/9V/12V, with a USB Type-C power connector). This is useful for powering internet switch/router during a power outage. If you need 5V UPS with USB output, use this design instead. Aug 2024 update: I…
This is an audio cassette organizer with a dispensing mechanism (tape delivery mechanism?) inspired by the ones in Kalmar Designs organizers. The inspiration to make it (and to make it modular) came from this great project on Thingiverse.…
I needed a smaller one, same thickness but 50% otherwise adjusted hole size to still work with common screws
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
1/10電動4WDラジコンカー タミヤのTT-02をベースにしたMサイズシャーシ(ホイールベース210mm)です。 組立には主に下記のパーツが必要です。 ・TAMIYA TT-02 Cパーツ ギヤボックスジョイント ホイールアクスル ドライブシャフトジョイント Gパーツ デフギア スパーギア(70T) ベアリング その他 ・ハイトルクサーボセイバー ・ダンパーセット(CVAダンパースーパーミニ等) ・M3x16mmシャフト(ドッグボーン用)…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely) I used blind holes on my design to give the upper part a cleaner look. The use of a…
Rengoku's Nichirin sword guard is a mesmerizing masterpiece that exudes both elegance and strength. Crafted with the utmost precision and care, it serves as a testament to the formidable spirit of the Demon Slayer Corps. The guard,…
New version (central gear is hidden behind the front panel) is published here . A clock with a perpetual calendar mechanism that correctly handles all types of months, including February in a leap year, has been developed. Despite the…
My first contribution on Thingiverse and first design. This is a 3D printed USB Power bank based on MakerHawk 18650-Board (H961-U v3):…
I was just playing around a bit with splines in Fusion, this is what came out! Print it in vase mode. If you like check out my other designs too!
I saw Julius Curt’s enclosure project based on Ikea Vårsyren lantern and was facinated by the idea, only at that moment I needed larger enclosure with good cooling capabilities for my spot welder project. Therefore I decided to utilize…
Copy-paste of Creative-Extension11 's wonderful DIY Nods. All info is included in downloads. Please notify me if anything is missing. The EnVeeGee is a digital-only refinement of the PVS-69 created by VonScherfArms. Using the technology…
I designed a ball and socket joint inspired by https://www.thingiverse.com/thing:889439 to help me with a helping hands project I wanted to create. I took a different approach to the design and added dimple and detent system that allows…
To print the main SOAP DISH BODY part use Fuzzy skin to get a nice texture. I suggest these settings if you want light texture: Fuzzy skin: All walls Fuzzy skin thickness: 0.15mm Fuzzy skin point distance: 0.25mm To print the INFILL STYLE…
This is a playdoh MegaExtruder that uses an auger to push the dough through the shape templates. It features a kid friendly crank that is geared down to help make it easier to turn. The gearing is external and oversized to make it more…
MLP Based Unicorn (Easy Print No Supports ) by 3DPrintedAspie Print Settings Printer brand : Creality Printer : CR-10 Mini Rafts : No Support: No Resolution : 0.1 Infill : 15-25 Software: Cura 5.2.1 Nozzle: 0.6 Filament brand :…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
A collection of rigged humanoids, body parts, weapons, my Cura profile, and a Blender work space that is inch based. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models…
Part numbers: DBC101690, AWR6711, DBC101680, AWR6712 --------------------------------------------------------------------------------------------------------------- On thingiverse is similiar model, but without locking hook. I had done…
made by Dr. Brett Carey and engineer Ben McCandless originally to benefit patients without health insurance. Measure the diameter and length of a patients wrist and re-size accordingly. Use the mirror function to turn this into a left…
5V UPS based on LX-2BUPS module (5V, with a USB Type-C power connector). This is useful for powering internet switch/router despite a power outage. In case you need a 9V or 12V UPS, or you need a cable output with DC jack instead of USB,…
I made this model because I was unsatisfied with other milk crate models out there. Other models had a lot of bridging perimeters and unsupported areas. This model uses curved edges to avoid unsupported reinforcements. You can edit nearly…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
This seemed like it needed to happen. Gridfinity-based seed germinator & planter with print in place water circles in each container. Not yet field tested, currently planting.
How did I design this model : watch the tutorial : iPhone 16 Pro Max iPhone 16 Pro Max specs iPhone 16 Pro Max release date Buy iPhone 16 Pro Max iPhone 16 Pro Max price iPhone 16 Pro Max pre-order iPhone 16 Pro Max deals iPhone 16 Pro…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
This project is based on Joshua Taylor Recreator 3D MK5 project kit, allowing the conversion of an Anet A8 3D printer into a 1.75mm recycled PET filament making machine. It is suggested to print the geared parts in PETG at 4 walls and…
NOTE: New as of September 7, 2024 - I added a remix of this case that supports Bart Dring's FluidDial Starter Kit. Buy Bart's FluidDial Starter Kit: https://www.tindie.com/products/33366583/fluiddial-connection-starter-kit/ Access the new…
While making this project it is highly recommended to desolder the PCB which has the side buttons on it to keep it from rattling inside of the mouse and to make the mouse lighter. This probably needs a quite well calibrated printer. The…
To scale glass dagger from the epic series Mistborn by Brandon Sanderson.
Print in vase mode. Use a low layer height so the curves are smooth and there is no holes. If printed with fuzzy skin at 0.1ish thickness and 0.5ish point distance the vertical seam is less visible.
Full assembly manual and the entire configuration process soon on my instructables: https://www.instructables.com/3D-RC-Arduino-Based-RC-Car/
Tennis Racquet grip size can be changed by removing the “pallets” from the handle of the hairpin of the tennis racquet. I believe in the USA Head is planning to no longer make the TK82 pallets available, so this seemed opportune. The…
I designed this to lock the flywheel or flexplate on the LS based engines. It held rock solid while I torqued the crank bolt to over 250 lb ft. You can probably get the same results at 60% infill. Print this logo side up. PLA or PLA + 90%…
A very cheap, premium looking enclosure for your electronics project. Let's profit off that consumerist mass production (it's happening anyway, at least put it to good use). This Ikea Vårsyren thing costs $2, for which you get 6 sheet…
Freddy FazBear FNAF - Based Joins Dummy 13
"The sphericon is a solid that has a continuous developable surface with two congruent semi circular edges, and four vertices that define a square. It is a member of a special family of rollers that, while being rolled on a flat surface,…
Here is my personal configuration file for my Prusa MK4S + MMU3. I first imported PrusaSlicer configuration and adapted some bad conversion parameters and optimisation (for my usage). PETG and PLA profile No HF config Only 0.4mm nozzle…
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. As an additional hobby that I have is to grow hot peppers, and at the beginning of each season, I grow new seedlings from new varieties, therefore there…
A collection of 4, Inch measurement based circular mounts for MMS/Picatinny! 1 Inch, 1.5 Inch, 1.75 Inch, and 2 Inch! If you need millimeter based measured ones, be on the lookout for another post with millimeter measured circle mounts!…
Replacement Hot Shoe cover. I based the design on the Olympus OMD EM3 Mark II model. I included the Fusion 360 file so you can customize it if wiished Category: Camera
.3 Almost an update, the STEP file is now attached for your editing pleasure. (including some trim i was working on that i didn't like that much.) .2 UPDATE! The X.1 short sides were very tight and required crushing the filter a lot. The…
Habe das geniale PVS-69 alpha Modell als Basis genommen um ein digitales Nachtsichtgerät zu realisieren. Zum einen, um mich in das Modden und Modelieren einzuarbeiten und zum anderen das programmieren des ESP32 Board zu erlernen.…
Bottom is made for 3mm heatset inserts. I used four stick on rubber feet to stabilize the board since the gps module lives under there. A few dabs of hot glue will keep it in place. The holes for the screws on the antenna ring and the lid…
I made this part for a worcolleague which goot a pcb holder 3d printed - he was misssing a spring material to put on one side- I create this part sadly I cannot recall which model he used. it was printed in tpu on a micro 3d printer- I…
I really love the StealthBurner look and wanted to make a cooling duct that has that cool turbine look for my ender 3 s1. This is my second attempt at this. Much learned from my first v1 attempt. This improved version fixed a lot of the…
I made this model to mount my DC/DC charger which charges the secondary LiFePo4 battery of my RV from the alternator. At the moment the model only has 2 5.5mm holes to be used with brass M4 inserts but I will add more holes later on to…
Mini Laptop but I edited the aspect ratio, the trackpad and the keyboard layout.
This is modified version of Valentin's scale to fit on my Breville Dual Boiler espresso machine. An ESP32-based Feather board is used in place of the ESP32 Thing of the original. This board from EzSBC.com vastly reduces the original…
This is a remix of Kensei @Kensei_237841 's excellent version of the Weber Workshops Moonraker WDT tool. It looks and feels the closest to the real thing. Turns very smooth because of the bearings and also adds heft, which makes it feel…
This is not a 1:1 reproduction as I modeled it from images with no references other than “feel”. However it is good enough and works well enough and has done for a good many months now with heavy use. Partly recorded the journey on the…
Reworked designe of mITX pc case based on GhostS1. Changes: Biger components splited on parts for easy printing. Main sizes changed according with manufacturing process, extra clearence for beter cooling and cables manedgment. Extra room…
"The sphericon is a solid that has a continuous developable surface with two congruent semi circular edges, and four vertices that define a square. It is a member of a special family of rollers that, while being rolled on a flat surface,…
Remix of a remix. For use with 10" rack modules. This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to…
EDIT1: uploaded a V2 version for Y belt 10mm from my original mod. Step file updated too EDIT2: Tbgs Carriage is complete, the step file is avaible, the mod is on testing, after some tests the stls will be relased IMPORTANT UPDATE…
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
Run your Home Assistant Voice Assist Wyoming Satellite on a Pi Zero 2W! Non-printed materials required for assembly 1) M2 8mm round head screw - 11 pieces (they are actually slightly too long for securing the lid but I couldn't buy any…
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
Custom made insert for parametric "Rugged Box". Fits Rode Wireless Go II microphones (didn't test 1st gen microphones, only 2nd gen). You will need: 4x M3x20mm bolts 2-3mm thick foam (optional) super glue TIPS: Print the letters upside…
The layout of the letters was inspired by https://github.com/brettoliver/wordclock but the underlying code and construction is different. I have made a few versions of this over the past few years and I though I should release it as I've…
this is a lego based snowboard that fits in real lego i hope you like it and print it made by fabian boshoven in fusion 360 with a prusa mini +
A gridfinity based shelf to hold 5M printer essentials. It gets very close to the frame. To attach to the printer you will need 3 M4 bolts and nuts. Tested with Slim Shady enclosure.
This is case for DC/DC step-down voltage converter based on MP1584. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 100%
The parent system is neat, but it contained no way to slot tools like try or machinist squares and digital angle rulers on wall control panels. Additionally, I found some of the sidepiece flats and pins in the parent to have hooks that…
Chair from skilift based on a doppelmayr 2 seater (on request from someone) This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub…
