Counting matching models…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Frame: https://a360.co/38FBsJz Weighted Plate: https://a360.co/3uCJ2gR…
Gridfinity baseplates completely remodelled from scratch, designed to minimise print time. Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Sizes 1x2 to 5x5.
Gridfinity base plates with adapters to lock to honeycomb wall. Be aware of weight of load of lager baseplates. This project is based on https://gridfinity.xyz/ If you want to support me, please buy me some filament .
This is a remix of the gridfinity baseplates by josh.hall - https://bit.ly/JHGridfinityBaseplates who did an awesome job with his version of the baseplates. Versions The modular baseplates come in two versions: Baseplates that can attach…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
When stacking several bins on top of each other it can be a bit tedious to access the lower bins. Especially when you place the bins in a box like in my IKEA Samla Gridfinity series (…
Automatically generate Gridfinity templates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . The models correctly implement all features included in…
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
Gridfinity baseplates with slightly smaller (6.5mm -→ 6.09mm) magnet holes. I use this jig and a hammer to add the magnets. No need to wait for glue, and you can poke the magnets out from the other side to recover the magnets when done!
V1 - untested - 2x3 and 1x2 Gridfinity Baseplates adapted to Multiboard system - untested - tested: 2x4 Printed in clear resin it fit too loosely into the Multiboard octagon tile, but with a bit of glue it now holds a 600g bluetooth…
This model is based on the Gridfinity baseplates by Zack Freedman. You can find the original model here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925 I really like my version of the Gridfinity modular…
Why Walther doesn't make a polymer baseplate that fits into their magwells is truly beyond me. Their engineers likely could have modeled this in 1/4 of the time it took me and they already have injection mold tooling, but leave it to the…
These baseplates fit the Harbor Freight medium sized small-parts organizer ( this one ). I included two variants, the minimal baseplate and the skeletonized version with magnets. The magnet holes are sized for press-fit without needing…
16 June Release: These are the baseplates for the popular Gridfinity Storage Solution. I have uploaded variations of the baseplate up to 5x5 which is the max that can be printed on the mk3 or mk4. 14 July Update: Added additional sizes…
This is inspired by Zack Freedman's weighted Gridfinity baseplates, but puts the weight cavity on TOP so that the model needs NO SUPPORTS to print. As with all my other Gridfinity models, this was designed using CadQuery instead of Fusion…
Mount storage right to your printer with the Gridfinity modular workshop storage system - whatever machine you use! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…
This baseplate fits the Harbor Freight medium sized small-parts organizer ( this one ). I took the original one piece model and cut it into 5 pieces to fit on the Bambu build plate. The placement/orientation is as follows:…
I couldn't find any Gridfinity Baseplates made for IKEA MICKE cabinet so I made my own. Fits perfectly (left some room for error). Baseplates are split in to 2 parts and fits on Bambu X1/P1 plates.
These are the baseplates for the hexagonal dungeon tiles we created. You can use the clips and legs to raise the baseplate if you want to take it to a higher level. These baseplates go together with the tiles we made. Our tiles are made…
Ongoing collection of various sized gridfinity baseplates with a provision for screw mounting remixed from the design by Ofek256.
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
These baseplates fit the Harbor Freight large sized small-parts organizer ( this one ). I included two variants, the minimal baseplate and the skeletonized version with magnets. The magnet holes are sized for press-fit without needing…
The angled baseplates allow you to store longer items at a 65 degree angle while maximising your desk space. Great if you have longer items in a draw and you want them on your desktop for a period while using them. There are two variants…
Note: Recently found that some Trofast are a little smaller. Have designed slightly smaller and will print and retest before I post. Girdfinity baseplates to fit inside IKEA Trofast containers. I use these with brackets I made as drawers…
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors , but they are not designed to be flushed with a vertical surface. (You might also want to…
Original Gridfinity accessories and baseplates by Zack Freedman: https://thangs.com/designer/ZackFreedman NOTE: If you're going to add weights to the model, please make sure the dimensions of your weights fit in the slot. This model has a…
Remix of Asotrot's baseplates with dimensional adjustments that allow for inconsistencies in drawer widths. Also included is a rebuild of the baseplate to feature magnet holders using the FreeCAD Gridfinity Workbench . The magnets in this…
Designed to fit the drawers for this Husky Work Table . I believe the 72in version of this work table has the same sized drawers so it should also fit. You'll need to print: 1x Corner Top Left (1) 1x Corner Top Right (2) 1x Corner Bottom…
Mirrored Plates uploaded 5/6/24. Added spacers to the original 4x3 baseplates to make them fit in the drawers. Wanted to modify my Clickfinity Refined plates to fit inside the HART Stack System Two Drawer Tool Box from Walmart, but found…
Akio already made a few parts for the 5L Samla boxes from IKEA, but I couldn't find a handle which would fit this small box, so I made one. It's meant to be used together with the following parts by Akio (and a 5L Samla Box): 5L Samla…
Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…
Overview Yet another set of Gridfinity baseplate inserts for the IKEA Kallax drawers. Existing work includes excellent models from JacenToth , scorf , Alex_235390 , and others. Variations in this model include: Shifts bins to the left…
NOTE: I RECOMMEND YOU USE MY IMPROVED SUPPORT-LESS WEIGHTED BASEPLATES AVAILABLE HERE INSTEAD: https://www.printables.com/model/186703-support-less-weighted-gridfinity-baseplates-cadque This is a from-the-ground-up reimplementation of…
Original Gridfinity accessories and baseplates by Zack Freedman: https://thangs.com/designer/ZackFreedman NOTE: If you're going to add weights to the model, please make sure the dimensions of your weights fit in the slot. This model has a…
Remixed the 3 wall variant and increased the height of the sides thus making it sturdier. Ultralight: 16g Ultralight+: 8g (3 wall) Ultralight+ Thicc: 12g Onshape:…
These are the base plates (and spacers) needed for the wide Ikea Eket drawer with 70x35x35 cm dimensions. I used two 5x5 baseplates, two 5x1 baseplates and two 6x2 baseplates. I also created some small spacers for the sides and the back.…
Fits the HOLT5202BJ2 drawers perfect when printed with PLA While you could rotate 180 degrees this assumes you want no gap on the front drawer edge Since there is limited Z clearance I chose the minimal baseplate so they are staggered to…
AI isn't always good at a lot of stuff out of the box but the giant toads are pretty good. For this fellow I just did a bit of sculpting on the fangs, then used the draw tool on the warts to thicken them up a bit and lastly added a skin…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon…
Download the most up-to-date version on MakerWorld: https://makerworld.com/en/models/20886
Need Gridfinity in your Series 3 US General 56" top drawers? These four baseplates are sized for a snug, no-wiggle fit in the top two drawers of the Harbor Freight US General toolbox. Print the ones you need, drop them in place, and enjoy…
Need Gridfinity in your Series 3 US General 56" top drawers? These four baseplates are sized for a snug, no-wiggle fit in the top two drawers of the Harbor Freight US General toolbox. Print the ones you need, drop them in place, and enjoy…
I had good success printing these (and other gridfinity parts) with 0.2mm layer height, 0.6mm nozzle, and outside parameters first (outside to inside)
Gridfinity is a highly adaptable modular system designed to organize tools, parts, and small items. Here are the key components you can 3D print: Gridfinity Bins Modular storage containers designed to snap securely onto Gridfinity…
This is my verson from gridfinity baseplate for my magnusson toolbox
Basic Gridfinity baseplates for Harbor Freight Yukon 20in. 3 Drawer Toolbox top and drawers split up to fit on MK3/MK4 build sheet. I used this Gridfinity Baseplate Calculator and OpenSCAD for the top baseplate and the Fusion 360 plugin…
These are half-width options for the Gridfinity CLICKbase baseplate variant. The baseplate units in this remix are 42 x 21 mm. They hold bins on the long sides of each unit only but still have clip connectors on all four sides. The 1 x 1…
Wanted to be able to use https://www.printables.com/model/373752-gridfinity-stackable-modular-baseplates as a tray so I made some handles for it. Used 4x M3x10 screws and Nylocs.
PLA works great, standard Prusa settings.
These models are part of the Chunky Tool Wall Collection . Collect 'em all! These are Nx1 Gridfinity baseplates for an IKEA SKÅDIS pegboard. They tilt the bins forward so you can see what's in them and get it out. They have color accents,…
Description Automatically generate Gridfinity Baseplates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . I've taken the original Baseplate model and…
Gridfinity baseplates to fit the Ikea Storklinta Nightstand. Fits This Model: Nightstand, with 2 drawers, 19 5/8x18
Connectable Gridfinity Plates, Plate 1 is the connector
I needed handles that were low profile to allow for stacking and would also fit inside the dimensions of a regular Gridfinity. It does take up 3 slots that would normally be used for bins, so it's obviously not ideal for small trays.
For the few with smaller printers WDhex Baseplates in sizes 4x4, 3x5, and 3x4 Link to Original : https://www.printables.com/model/83851-wdhex-baseplates-legs
These are 1x2 gridfinity baseplates. There is one flat one and the rest are at angles, in 5º increments up to 20º. This can help accommodate a leaning surface, or it can point the gridfinity module at an angle. For example, this lets…
Baseplates for the game GKR (Giant Killer Robots). These allow the health of a unit to be displayed on their baseplates rather than unit cards, making it more visible to other players at a glance. Print instructions Category: Toys & Games…
I like TechnoVardo's radom design, but he (reasonably) doesn't have a baseplate for every possible radio. I have a blank baseplate and a baseplate for the WisBlock 17007 (WisBlock Base Board), which includes antenna mounts for BLE and…
This is gridfinity baseplate for my big magnusson toolbox. you can find baseplates for the small toolbox here https://www.printables.com/fr/model/500597-gridfinity-baseplates-magnusson-toolbox
This model has been replaced by the following: https://www.printables.com/model/413761-gridfinity-refined
Python code to create custom Gcode for Gridfinity baseplates of any size or tolerance. Home manually before print.
A bunch of gridfinity baseplates from 1x1 to 6x6
Two Autodesk Fusion files that use parametric to generate Grifinity Baseplates. One is "neat" and one includes provisions for magnets. The a "margin" or "boarder" parameter is included. This will allow the plate size to be adjusted to…
Got a wire shelf? Gridfinity it! This project provides Gridfinity baseplates in various sizes that hang on the side of a standard wire shelf. The baseplate can be hung directly on the side of any wire shelf. Additionally, the hook on the…
Standard sized Gridfinity baseplates, with attachements for Qube 500 computer case
Are you having Trouble pressing in the connectors of lightweight Gridfinity Baseplates? Use this Tool to hammer them in! Made for Connector pieces like the ones from gridfinitygenerator.com. Mine werent fitting so i had to hammer them in,…
Enjoy a playful Crash Derby board game experience with a cute and smooth looking toddler style vehicle. Choose from either a 🚗 car, 🛻 truck or 🚙 jeep model. Taking inspiration from my previous toddler car toy model, I scaled it down to…
Generated via the https://gridfinity.perplexinglabs.com/pr/gridplates/0/0 generators. I like this toolbox and I've had it a very long time. It's gone on a lot of Lemons races with me. However it does tend to accumulate lots of unsorted…
Subfinity Subfinity is a Gridfinity-compatible alteration to Zack Freedman's original Gridfinity storage system. It shares similar grid plates and bottom profile chamfers, and is interoperable with the standard spec and compatible with…
Other shapes with no corner removed: https://www.printables.com/model/400610-gridfinity-push-together-baseplate-lite
These are lightweight modular gridfinity baseplates, which have minimal filament usage and use M3 nuts to magnetically hold your bins in place, they do not have physical perimeters to hold anything in place. Use M3x12mm or longer screws…
Gridfinity - Husky 27in 5 Drawer Tool Chest Though gridfinity is easyish, this was a bit tricky. I couldn't find internal measurements for the drawers online, and it is really hard to get a ruler on those 90-degree sides. I will be…
The first three of a (intendedly) growing series of 16x16 studs base plates with a crop circle theme accidentally compatible with an existing interlocking brick system. Print Settings Printer: Creality CR-10 Rafts: No Supports: No…
this is a baseplate for the Ikea Skadis plate
I had been looking for a good scrap bin to put on the side of my Ender 3 V2, when I realized I could adapt the Gridfinity system to fit on 2020 extrusion. Similar ideas have been done before, but I tried to make this a well rounded…
This is an adaption on the code from jdegs. I cannot code by myself so i had a little AI help. Everybody knows gridfinity by now so no explanation needed there. This is a CadQuery.py file so you can adjust your gridfinity base to any…
Parametric designs but made from the original .stl, the slider part itself is therefore not parametric sadly. Remix of the baseplate of this model: Simple yes/no slider indicator - By Tom Price (@Tommax) - On MyMiniFactory (…
A complete starting kit for Gridfinity, the modular 42mm storage system. Includes four baseplates (2x2, 3x3, 4x4, 5x5) and six bins covering the sizes you reach for first: 1x1x3, 1x2x3, 2x2x3 with four dividers, 2x1x6 with two dividers,…
Last year I shared my packout/sortimo sized gridfinity system. This is a cohesive collection of base-plates to organize all your sortfinity bins. If you have Adam Savage's Safety Orange Sortimo system, it holds these bins as well.
Display stand arm with smaller interface pegs to allow for use on the baseplates of shiny Blokees transformer figures
The Slimmer, non-magnetic way to organize your desks, drawers, ect. And best yet it hardly uses any filament at all.
Gridfinity baseplates with handles for easy carrying.
The sizes the usual Gridfinity starter sets leave out. Most starter sets are deep square bins on square baseplates. Drawers are the opposite: shallow and oblong. This kit is 14 bins and 4 baseplates built for that. Half-height bins (2u,…
Printed with 10% infill and support. I prefer the triangle one as it's easy to remove and you don't see where the support has been once you hang them. This is a work in progress as I modify each base as I need them.
Why I made this: I've gotten really into trying to dial in my studio by organizing all the things with Gridfinity . I now have a H2D, so I can print up to a 6x6 baseplate! But the problem is that even a big ol' baseplate is just one plate…
Everything you need to start a modular drawer or desk system on a Gridfinity-compatible 42 mm grid: baseplates in two sizes and two styles, and a set of stackable bins with a label shelf. Free, with the full parametric source. Baseplates…
Easy print, 3.6mm floor thickness. I just printed in PETG and glued them into place with liquid nails.
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
I had been looking for a good scrap bin to put on the side of my Ender 3 V2, when I realized I could adapt the Gridfinity system to fit on 2020 extrusion. Similar ideas have been done before, but I tried to make this a well rounded…
Last year I shared my packout/sortimo sized gridfinity system. This is a cohesive collection of base-plates to organize all your sortfinity bins. If you have Adam Savage's Safety Orange Sortimo system, it holds these bins as well.
Gridfinity - Husky 27in 5 Drawer Tool Chest Though gridfinity is easyish, this was a bit tricky. I couldn't find internal measurements for the drawers online, and it is really hard to get a ruler on those 90-degree sides. I will be…
This is gridfinity baseplate for my big magnusson toolbox. you can find baseplates for the small toolbox here https://www.printables.com/fr/model/500597-gridfinity-baseplates-magnusson-toolbox
