96 models
Status: V1 does not work very well, V2 works better but is a flange type. The lines are quite small, printer precision will be beneficial and a nozzle smaller than 0.4mm would likely help, untested. V1 ID: 48.5mm Print flat side down, any…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
This model started as my entry for a Prusa design contest in 2023 - I missed the deadline, but later picked the project back up, finished it, and shared it here. Original competition entry: Note: AI was used to create the project…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
This is the Ebony Dagger from Skyrim. The measurements seem accurate, but it is a little small, so you might want to scale it up a bit. UPDATE- I have remade the 3d printing files to fix some issues and make them easier to print.
This is a remix of the lovely "Ebony Dagger (Skyrim)" model by Shadowcraft. Thanks, Shadowcraft! I have made the following changes to the original: Scaled up the dagger so that overall length is now about 40 cm. Trimmed the base of the…
This design was created using Adobe Medium and an Oculus Rift/PC. I have sold it for several years in my Etsy store and assembled/shipped about a dozen of them in that time. The files have been heavily refined for maximum success rate…
After a having a problem with my guiding due to dew, I decided I need a solution fast. I could save the night with an empty toilet paper roll 😅, but a more permanent solution was needed. This is a custom dew shield for the SV165 Mini…
Figure size Skeleton The wrong hand: 30,5 x 34 x 41 mm Figure size Skeleton Warrior: 36 x 26 x 41 mm Figure size Skeleton Thats not my sword: 24 x 30 x 42 mm Use your own stand or a pre-made stand in my models Supports are necessary…
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 30-35min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.
A finder foot for the Svbony SV241 Powerbox, allowing you to attached to a finder shoe on your telescope. I used two M4 10mm button head screws to attach to the Powerbox.
El portafiltros SVbony SV226 viene con dos portafiltros y necesitaba guardarlos de la manera más eficiente en mi caja para un uso lo más comodo y rápido posible. Tambien he preparado dos versiones de tapas para cuando no quiero usar…
Bahtinov mask for the Svbony 60/240mm guide scope. Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights. Print Settings Printer…
This is a dew shield for the SvBony SV165 30mm mini guide scope. There is also a cap included to print due to the size of the shield being bigger than the orginal one.
Two versions of a frame holder for the prusa filament guide by Habony Norbert. High enough to avoid a crash, when printing max height.
This is an add-on for the excellent filament guide by @HabonyNorbert . I wanted to clip it onto the frame, so put this model together. I printed mine without supports, but had to carve out a slight bit of bridging in the hex hole to get…
Standard Vixen-stlye dovetail, with holes for Svbony / Orion Guide Scope rings, and Svbony dovetail clamp. Versions: The 90mm version is the same length as the original finder-dovetail. The 120mm adds a bit extra length for balancing.…
The Tri-Bahtinov mask was designed using this excellent tool: https://skeye.rocks/tools/mask/ The mask and dew shield are designed to be a snug pressure fit onto the lens cap flange by adding a couple strips of adhesive velvet as sold for…
The svbony SV226 filter drawer comes with two holders, but you may need to use more, so I designed this magnetic modular box. Print as many modules as you need. You need one “spacer” and two “plates” parts per module. I choose a 2…
Request by an amatorial astronomic photographer “Andrea Anghileri” This is a dew shield for a guide telescope by Svbony model SV165 3omm f4 The project is composed by 4 pieces: dew shield with rapid joint lens cover with rapid joint part…
What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…
I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…
A Bahtinov mask to fit over the Svbony sv555 telescope dew shield. It has a low factor with relatively wide spacing to make it easy to print.
I wanted to check the alignment/collimation on my Svbony SV121 Laser Collimator, but other existing tools didn't work as it has 2 different diameters to the front an rear of the housing so I designed my own alignment jig for it. Uses 4 x…
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 60-70min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.
Remixable step, sorry but I dont like others box, it take less time to print dont waste aditional material, and also you can remix it.
A simple adapter to mount the SVBONY SV165 Mini Guide Scope on the Celestron C5. The advantage is that the centre of gravity is closer to the centre.
I have just reposted this from Thingiverse. This is a Bahtinov mask for the Svbony 503 80ED refractor telescope Printed with: 20% infill PLA+ no supports Thank you to the original maker.
The SV133 is a low cost manual filter wheel that suffers from some unfortunate light leaks through the control wheel. Other brands (eg. Astromania) also offer nearly identical models that would probably fit as well. This cover goes over…
A mount to attach the Overclock 4C to the dovetail clamp using screws. Parts I used: https://www.amazon.com/SVBONY-Medium-Dovetail-Telescopes-Cameras/dp/B08TC3W79Z…
Squeeze the finger loops and this bony arm shoots out across the table while two skeleton hands snap shut on a sweet, a sock or a little brother's ear. Open your hand and it folds back up. Perfect for stealing sweets from the Halloween…
A Bony beetle. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
The Ebony Guardian is a stylized 3D figurine of a majestic shoebill, standing proudly on a round base. With its sharp lines, iconic beak, and vigilant expression, it radiates both authority and calm. This piece is perfect as a decorative…
A bracket to attach a SvBony 241 power box and Mele Quieter 4 PC to a finder shoe on your telescope. Print upside down and no supports are needed. In addition I used: 2 x M4 10mm screws to attach to the Power box 2 x M3 8mm screws to…
V2 - SV211 Handle bar for SvBony SV503 80ED Telescope
Same printing instructions as the original. No supports needed, print vertically for best strength.
Replacement lens cover/cap for SVBONY SV165 Mini Guide Scope for when you inevitably misplace the original. Recommend printing with TPU. DISCLOSURE: I get commissions for purchases made through links in this post.
Suggest 60+% innfil to make it structurally sound. Rafts are reccomended.
A 3D Model of the SV241 Power Hub by SVBony. I took all measures manually, accuracy is not granted.
This adapts the popular 4.58in or 100mm solar filters to the SVBONY Maksutov-Cassegrain of the 105mm size. I printed this from ASA with some shrinkage in mind so if you print with PLA or PETG might want to shrink it by 0.5% There is a…
For my eyepieces I had to use the following spacer to reach parfocal: 20mm - None 15mm - Use 1.8mm spacer 9mm - Use 2.0 6mm - Use 2.2 I suggest printing all the sizes and take it with you on a clear night to test out. Takes a bit of trial…
Bahtinov mask for finder Svbony SV165 30mm f4
This is a holder/frame for a Baader Solar Film filter, that will fit a Svbony SV803 80ED Telescope. It comes complete with the clips that will hold the retainer and bracket togeter. Printed with: 15% infill 0.4mm layer height PLA+ No…
Just a simple mount for the "cheap" Svbony right-angled finder scope for my metric Hadley Its a very tight fit, you may need to up scale it by 1%-2% unless you have a particularly well-tuned printer.
Replica of the Filter Holder
Ebony , Destroyer of Diligence ( Designed in Blender ) 40% infill in ball is best for some weight , The chain may need some clean up with a hobby knife or you can try paint on supports in Prusa-Slicer if you like As you can see I have…
Lens cover for svbony sv555. lightweight and prits in 40 minutes
This is a two part model. The handle click locks as you rotate it. The center has a 5mm hole with you can put some transparent tap for checking the coloration of your focuser. I printed this with Black ASA so other print materials might…
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
1-2-3 and 4 slots for filters.
This ring is a simple one perimeter print. I used asa and cut the ring to get it to drop into the rotator threads. This prevents your camera or eyepiece from moving around and getting off center. I recommend printing this with a brim.
114mm Travel Telescope: https://www.printables.com/model/1038495-travel-telescope-114mm-updated-version/ Hardware required: 4x M4 heated inserts to be inserted via the back of the model (where the champers are). I believe I used 4mm…
Li'l Skel'ton is basically the stripped-down version of my FAB•!T figure, ready for Haloween fun! PRINTING As always, the parts are all in a single 3MF, so separate it to print in whatever way works best. The parts are pretty thin here,…
The SVBONY SV535 doesn't come with a dust cap for the lens when the dew shield is screwed on ready for use. If others also have their SV535 ready to go, they should find this useful SV535 Dew Shield v3-65mm - Has an extra 2mm diameter…
I found that the USB cable on the SV705C is very loose, so it disconnects easily when the telescope slews. So I made this to provide a bit of stablity to the cable. This is friction fit, as in VERY friction fit. It's not coming off any…
I really like the Sv211 dual use as a handle and a place to mount my ASIAir + Guide scope. Though I found it a little uncomfortable as two edges dig in when you are holding it. This fits under the rail and is held in by one screen on the…
Hello, Here is a Halloween "bony fish"—a fish skeleton . It’s a really well-designed little figure for Halloween. It’s spooky yet cute at the same time. Perfect for coloring! My kids love these little figures and really enjoy painting…
The original model blocked USB and power ports, so I modified it to use the lid screws to hold the pieces on. You'll need four M2.5 x 6mm screws (preferably countersunk).
A simple design that lets air space for passive cooling. The PC can however still be warm so it is best to use PETG or better heat resistant filament (PLA not recommended). For assembly - On the PC side : 2 standard computer hard drive…
The Svbony Dovetail Clamp is a top quality accessory for telescopes, but sometimes it is difficult to reliably fasten heavier loads. This thumbscrew handle gives you a better grip. The loose version is easily removable, and the tight…
I needed a solution for all my draping cables attached to my budget SVBONY Astrophotography rig. Rather than buying shorter cables of unsure lengths depending on slew direction and going crazy with velcro, I decided on designing this…
Made this adapter to attach the NEEWER guiding scope mount ( Amazon Germany ) to the tube holders of my Svbony SV503 80ED (should work for the other variants) instead of the rotating end of it. Makes cable management a bit easier, as well…
Adaptateur permettant d'utiliser la caméra Svbony Sc001 avec la lunette Svbony SV460. --- Adapter allowing the Svbony SC001 Wifi Camera to be ajusted in the spotting scope Svbony SV460. Filament : TPU / Flex (ideal) Infil : doesn't matter…
A mount to attach a rail mounted red dot sight to your SVBony SV503 (and similar) telescope. Prints without supports. Created using Uzzors2k's Red Dot mount for Celestron Travel Scope ( https://www.thingiverse.com/thing:2731878 ) as the…
This is a Vixen-compatible mounting plate designed for astrophotography setups. It allows you to securely mount both a Raspberry Pi 4B (in a case) and the SVBONY SV241 Astronomy DC+USB Hub Box on a telescope using a standard Vixen…
These rings/retainers allow a Baader solar film to be used with the Svbony SV47 8x42 binoculars Printed with: 15% infill PLA+ 0.4mm layer height no supports required You can just cut the Baader film accordingly and jam between the two…
Ring mount for a guide scope; I recommend gluing a thin rubber layer inside to prevent slipping/rotation.
Designed to mount my opal router directly to my SV503ED70 it should fit other SV and possibly other scopes as it utilizes the M4 20mm spaced holes normally used to mount a finder shoe. The base is designed to fit snugly around the 75mm…
Solar Filter Holder for Svbony MK127 (Baader AstroSolar 5.0) A two-piece solar filter holder for the Svbony MK127 telescope. The frame clamps the filter film sandwich evenly and features an internal stop ridge to protect the meniscus lens…
2x2 gridfinity holder for a svbony SV105 telescope astrocam.
I created this design with the idea of preventing the Arcaswiss plate from rotating on the Dovetai base, thus ensuring that the telescope's orientation is always the same each time it is mounted on the tripod using an Arcaswiss base.
This is a set of accessories for the tiny Svbony SV535 astro photo lens Dew shield Lens cap Bahtinov mask Phone holder (for flats) I've printed this with the PETG, 0.16 layer height
Print with supports. Pls like and post makes. Good luck!!! Sorry I couldent make his legs articulate it would be pretty hard to do it.
Svbony 105 spotting scope adapter, 42mm
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
The Konus Crystal-45 trinocular microscope's camera port does not fit the Svbony SV105 or SV205 imager. This adaptor is a press-fit for the Svbony housing and uses the existing fixing screw to keep the imager and adaptor in place. There…
Mele Mini PC + SVBony Power Hub Bracket For 30 mm tripod center column with removable end cap (required for installation) Compatible with photographic tripods that have a 30 mm diameter center column . Secures a Mele Mini PC and SVBony…
This is a modular accessory system designed specifically for the Svbony MK105 Maksutov telescope. The system is built around a base mount installed on the telescope tube, with interchangeable threaded accessories. 1 Base Mount (Core…
The WIFI camera (model v12) doesn't hold well on the original rubber ring. I created a reduction ring that holds everything firmly in place after removing the rubber ring. I use it with the SVBONY MC25-75x70 scope.
Print with supports. Pls like and post makes. Good luck!!!
To mount the adapter, simply unscrew the SVBony in half, replace the golden ring with the printed adapter, and screw it back together. Enjoy using it on old telescopes! Tape unnecessary ;)
A bony skeleton hand standing up out of a little trinket dish: slip rings over the fingers and drop earrings and studs in the dish. Spooky for Halloween and gothic enough to stay out all year on the dressing table or bedside table. Print…
SVBONY SV179 Two-Hole Base to Telescope Dovetail Adapter Why I created this adapter I purchased the SVBONY SV179 Red Dot Finder with Universal Two-Hole Fixing Base for my SVBONY MK127 Maksutov telescope. Unfortunately, I didn't realize…
I have just reposted this from Thingiverse. This is a Bahtinov mask for the Svbony 503 80ED refractor telescope Printed with: 20% infill PLA+ no supports Thank you to the original maker.
The WIFI camera (model v12) doesn't hold well on the original rubber ring. I created a reduction ring that holds everything firmly in place after removing the rubber ring. I use it with the SVBONY MC25-75x70 scope.
Ring mount for a guide scope; I recommend gluing a thin rubber layer inside to prevent slipping/rotation.
This is a modular accessory system designed specifically for the Svbony MK105 Maksutov telescope. The system is built around a base mount installed on the telescope tube, with interchangeable threaded accessories. 1 Base Mount (Core…
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
This model started as my entry for a Prusa design contest in 2023 - I missed the deadline, but later picked the project back up, finished it, and shared it here. Original competition entry: Note: AI was used to create the project…
The SVBONY SV535 doesn't come with a dust cap for the lens when the dew shield is screwed on ready for use. If others also have their SV535 ready to go, they should find this useful SV535 Dew Shield v3-65mm - Has an extra 2mm diameter…
Replacement lens cover/cap for SVBONY SV165 Mini Guide Scope for when you inevitably misplace the original. Recommend printing with TPU. DISCLOSURE: I get commissions for purchases made through links in this post.
The files include: - Assembled version - Bambu Studio Project and GCODE files - Pre-separated version split into 2 easy to print and assemble parts - Pre-separated variant with a hole cut for a 2mm diameter metal reinforcement dowel -…
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Bahtinov Mask SVBony 90mm Category: Physics & Astronomy
