Counting matching models…
Universal Door Sliding Sign A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included…
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
As requested, here is a very crude datapack to make the busy board below: “ Portable Busy Board BOM.pdf ” along with attached pictures should be enough to get yous started 🐱. But a few things to note: After you install the DCDC module,…
Nut on screw for busy board, also known as an activity or Montessori board. The nut can be rotated with ease. Mounts are tighter. Mounts are screwed on. The screw has the right length so they face the same direction. I have printed the…
A busy board for toddler. Print with non toxic material and paint with toy-safe acrylic paints (EN 71-3 standard in Europe). Glue parts with super glue. As safety cannot be guaranteed in amateour project, assist children during play every…
Stupidly simple gear set for a busy board. Five gears, all in the same size, but with different decorations, plus pin / peg intended as axis and mounting point. Nothing fancy, but with some colors and stickers it should be enough for your…
Print your own availability status sign/ indicator for your office! Largest part is 220mm wide (Fits on Ender 3 printbed) Total assembly size: 236 x 66 x 13mm https://www.youtube.com/shorts/jL63w14zDOU You can make your own custom or…
Curved maze for busy board, also known as an activity or Montessori board. Join the pin pieces with glue.
A clock for a toddler's busy board + a STEP file
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, but not when mixed. Just ensure your bed is clean and sticky,…
A set of gears, spinning wheels, and a simple maze for a toddler busy board. All screw on with #6 wood screws. 16mm M5 bolts are needed to attach the gears. 12mm M3 screws are needed for the maze. The spinning wheels require a 6mm shaft…
I'm a bee keeper and love watching them go about their work. I also love Wind Spinners. So when the yellow ABS filament arrived, I knew what I had to do :-) The support rods are pretty flimsy for heavy winds. I found some 6mm carbon rods…
I cut the base to 4 pcs to fit my printer. Some triangles are visible on top surface due to importing of stl files to Fusion360. Still looks fine in my opinion.
I will say that I over sized this when modeling it fusion. I printed it at 47.07% of the original size due to my printer size and all of them came out “acceptable” I adjusted the screw tolerances to try and make that a little better and I…
A modular labyrinth + a handle to drag through for a toddler's busy board Use 3-3.5mm screws, the holes are 4mm (0.15" or 5/32″)
A two-piece busy/free sign, to indicate if you are free to talk to, or if you're busy with a task or meeting and the visitor should come back later. Two holes are sized for 550-paracord, but are also large enough for alternative mounting…
Three Gears to put on a toddler busyboard. Works great and is easy to built.
This is a fun little busy board with about as many things to keep a toddler occupied as can fit on a build plate. Print Instructions All parts can be printed with a 0.2mm layer height, 15% infill, and snug supports are only required for…
A remixed mount to hold your Kuando busylight better than the stock 3M sticky.
I made this for my wife to hang on her craft room door when busy.
An hourglass toy for a busy board. I cut and glued a piece of acrylic on the front and used BBs inside.
activity boards for kids just some simple forms
This bee themed board game is a version of the classic game Mancala . Play Details: There are 48 bees in total. The goal is to capture more bees than your opponent. Depending on your choice of rules, the winner is either the one with the…
Busy Board /Activity Board Slider This slider is meant to be mounted on a wooden board with lots of other things. It can be used for small children. Print settings: Print orientation like the third picture. No supports needed Layer…
A what? With the world returning to semi-normalcy, but tele-interaction becoming even more common, sometimes it's necessary to have a "busy" indicator that can be seen easily from a distance in an "open office" setting. Stick the base to…
The model is designed for a 150% printed figure to be somewhat in the right size for the busyslight. I printed in .3mm Layer which seems to work for this part. Specifically the spine joints need to be relative ridgid to hold up the…
These models are for the Raspberry Pi Pico busylight. See https://buildcomics.com/3d-printing/a-microsoft-teams-adventure/ for the instructions and code! The owl cap has been made using Thing 18218 by Cushwa from thingiverse:…
Gears for Busy Board /Activity Board The gears can be mounted on a wooden board for small children or toddlers to learn about gears or to just have fun with it. Many more can be printed for a long chain of gears. Print settings: Print it…
Just a simple stand for olaf. Only takes a few minutes to print. I used clear PLA to try and make it look like he was standing on ice. Enjoy!
A spare magnifier glass for "Richard Scarry's Busytown, Eye Found It" board game. 3D PRINTING SETTINGS: 100% infill.
Fun little Bees. Provided as both a single whole Bee. and as two pairs of three STLs for easier coloring. Also included a BambuStudio .3mf file
Kids love pushing buttons! So I designed a button box that keeps young kids both entertained and improves their fine motor skills and dexterity. The STL has no text so you can emboss or deboss whatever text you like using your slicer of…
This is a status indicator (busy light) for your office or home office to show your colleagues, co-workers, boss, wife, children or cat if you are free to talk or do not want to be disturbed. Simply turn the thing over to swap the color.…
A simple light diffuser for a Kuando Busylight UC Alpha. I printed with a raft and it printed fine.
Do-Not-Disturb working/creating
Busy / free indicator when working
A remix from a remix from a remix wich I added à 90 degrees to stick on a desk glass at work.
Ich wollte mir selbst einen “Busy Light” für den Schreibtisch entwerfen. Wo ich mittels Handy und Fernbedienung die Farbe ändern kann. Ich habe dazu eine billige LED Platine aus dem Internet verwendet. Die WS2812 LED mit Fernbedienung und…
Вдохновился идеей создания такого стенда посмотрев цикл "Механические конструкции" автора icebox_xiao . Большую часть передач взял у него, увеличил в 2 раза и адаптировал под новый размер. Добавил разные подшипники и ремённые передачи.…
Compact Hexkey holder for 10, 8, 6, 5, 4, 3, 2.5, and 2 metric keys. There is a gap for O ring in lower part so it holds keys in place. No more fall out of holder. Ideal O ring is about 25mm inner diameter and to 3mm thickness. You can…
This is a replacement gear for the Playskool Busy Gears toy. Designed to pretty much the correct specs, but my printer (DaVinci) makes circles that are a little bit wobbly, so I had to sand and acetone the inside a bit to get it to spin…
I created this little project as a way to avoid undesired interruptions at work. With the A button you can change the your state between "free" and "busy". You can also turn off the LED matrix display. With the B button you active a 20…
An updated drive wheel for the Busy Board Gear Train. Instead of the original fixed handle, this one adds a freely rotating (but non-removable) sleeve around the handle. Designed to be printed in place, tested with PLA, 0.2mm layer…
In the base (cloud) there is space for 5x5x5 mm magnetic cubes, so you can attach the BusyLamp on magnetic material (some monitores have enough iron inside to put the BusyLamp on top of the monitor). If you want to use it as a BusyLamp…
This is a replacement crank for the vintage Playskool Busy Gears set: I did not have an original to model, so my version is a bit different (it has an octogonal interface and a print-in-place handle spinner for maximum fun). The edges are…
Used this to prank a coworker. Can be modified to fit any top desired. Printed in translucent PLA
Working in a crowded office and getting disturbed by your workmates all the time? Need some time to focus but don't want to be rude to them? Let them know with this minimal “free/busy” indicator. Just put it to red when you want to focus…
Split STL into separate parts and print them as neede. Only the green part needs supports. Layer hight around 0.3 mm
Adaptation of FlyBoyEUC original model, to fit the Elgato Solid Arm Mount. Perfect to display current working status in a room. Might a little tweak on the hole diameter, I did not bother print it again to test. F3d file included for…
With many people working from home for the foreseeable future, a way to notify everyone else in the household if you can be disturbed behind closed doors is crucial. A WiFi connected BusyLight using a Wemos D1 Mini and two NeoPixels can…
I have created housing variations for the BCI BusyLight that I would like to share with my colleagues here. This variant is intended for placing the BusyLight on the table. The stand is permanently connected to the lamp and is not…
This is an organizer for the new game from Phil Walker-Harding through his new publishing company Joey Games. Each set of bird cards fits in its own slot (print 2), select 7 birds and shuffle together. Open one egg box per player (print…
I wanted to mount a threaded rod with some washers and nuts onto our child's busy board. So I created this model. I used a M8 threaded rod. It is attached using two countersunk wood screws.
🟢🔴 Free/Busy Door Sign – Replacement Slider This is a 3D-printed replacement slider for standard "Free/Busy" door signs commonly used in office environments. It was designed in Fusion 360 and fits perfectly into the sign track of models…
I have created housing variations for the BCI BusyLight that I would like to share with my colleagues here. This variant is designed to attach the BusyLight to the top of the monitor. For this purpose, the design has a hook, which you…
I wanted to mount a simple water valve onto our child's busy board. So I created this model. I cut the valve cone off to reduce the depth slightly. It is attached using two countersunk wood screws.
100x160mm sign, with art of a beaver and messages “Busy”, “Log Off/On”. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see…
I have created housing variations for the BCI BusyLight that I would like to share with my colleagues here. In this variant (v2) only the PCB is protected with a case. The cable opening is located on the side. The LED strip must be pulled…
Toy for kids, with a few gears, a motor, leds and space for a key switch and a battery holder.
Mark your page with a joyful winter town! This detailed 3D printable accessory captures a bustling, snowy village street scene, lined with quaint houses and people enjoying the winter night under a bright moon. The intricate design is…
A simple to build, nice looking, cheap and portable DIY Busy Light. It can be controlled either through an (ugly!) Web UI or a REST API. I also provide a Stream Deck plugin to control it. I printed all parts in black PLA except the " LED…
This is a simple spacer to screw the inner gear of the Herringbone Planetary Gear to a busy board. It guides the screw through the centre and also acts as a spacer so the gear doesn't rub on the board. The mount is designed for use with a…
Busy Beaver River Wildlife Bookmark
Tired of being interrupted while you're in meetings or focused on a project? I purchased a dual-color USB busy light and modeled this holder to mount securely to the top of a cubicle half wall. It allows my team to quickly see whether I’m…
I designed a small BusyLight that clamps behind a door frame. It’s based on a Wemos D1 mounted with an protoboard together with 4 WS2812 LEDs. The device connects to my SmartHome system (ioBroker) and lets me switch manually between red…
This is a working analogue clock for use on a busy board (or any other panel really). It's protected with an acrylic sheet at the top to make it fairly child-proof. It's mounted from the rear with two M3 screws. The "ears" in the corners…
A simple game was required for little busy bees. There is flowers, pollen, that fit the flowers and upside down the honeycomb, the honeycomb and a box for the flowers and the pollen. The base plate for the honexcomb didn't print well, so…
Just turned the wheel other way
I was tried of the double sided tape not sticking to my cubical so I added a spot for two 2mm x 6mm magnets.
Kids love pushing buttons! So I designed a button box that keeps young kids both entertained and improves their fine motor skills and dexterity. The STL has no text so you can emboss or deboss whatever text you like using your slicer of…
I was tried of the double sided tape not sticking to my cubical so I added a spot for two 2mm x 6mm magnets.
This is a working analogue clock for use on a busy board (or any other panel really). It's protected with an acrylic sheet at the top to make it fairly child-proof. It's mounted from the rear with two M3 screws. The "ears" in the corners…
A remixed mount to hold your Kuando busylight better than the stock 3M sticky.
I modeled it after an official one, but didn't take too too much time making it exactly the same, but it's darn close! Should fit snugly, but if you feel the pieces are too loose, you can hit them with a heat gun and give them a squeeze.
Small photo frame for a busy board. Designed for laminated photos (15x10 cm). The door assembly is printed in place. I have the best experience with PLA for this particular toy. The additional holes are meant for mounting a small lock.
We got this Busy board (probably Anko brand) for our son, it's made of wooden screws and a wooden base board, and it came with a screwdriver. We were also gifted some kids toy tools, like wrenches and hammers. Unfortunately, the wrenches…
This 3D-printed stand is designed specifically for the Busytag device, providing a stable and elegant way to keep it upright on your desk or any flat surface. The stand ensures a secure fit, allowing for easy placement and removal of your…
Busy/Free Sliding Sign A Busy/Free sign 180x80mm big and 80x60mm big colored space to be able to see from a distance Screw holes to be able to fasten it properly, because it might be used outside. Printable background colors, or use a…
A new 3D figurine generated by AI, a karateka. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
It's a 3D printed box of glowy buttons that play random sounds to entertain babies and keep them busy. Refer to the GitHub repository for parts needed and assembly instructions.
A small sign to be hanged out of the door indicating status busy/free. The status green and red is a piece of paper printed, cutted and pasted with glue.
Simple mounting element that is hanged on the display, so one can put the kuando busylight on top. no glueing necessary
A fully adjustable maze to screw down on an busy board. The sliders (pins) can be printed separately, the maze has enough flexibility to insert them after printing. Once screwed down, the flexing parts are held in place and keep the…
Přehledný držák na inbusy s označením velikosti. Materiál PLA Tryska 0,4mm Vrstva 0,2mm Výplň 20%
The green part maybe needs supports. Layer hight around 0.3 mm. you can put light under the candles to light them up. Make the candles hollow for this.
A modified outlet for the 2hp craftex dust collector. This allows a slightly larger amount of air to exit the impeller and tilts the outlet downwards at a 45 degree angle. Fits a 6 inch flex hose to the filter housing
Looking for something to make an ordinary morning a little more fun? This mug is just that! It can be printed in any color, and even sized up or down for how much coffee you want!
This is a dog entertainment and education toy. It was designed to reward with a rolling ball if they drop it into the top. Without the bottom it acts as a simple puzzle to use their paws or muzzle to get the ball back out. Came up with…
I have created housing variations for the BCI BusyLight that I would like to share with my colleagues here. In this variant (v1) only the PCB is protected with a case. The cable opening is located in the lid. Links to other variants: -…
Use 1/2 OD tubing and fill with water&oil or glitter or whatever.
Case for a chain-pull switch for use on a busy board. https://www.lowes.com/pd/Harbor-Breeze-3-Way-Ceiling-Fan-Light-Swi
