Counting matching models…
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…
Printed with tamper side to the build plate with supports.
A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
Coffee Comb The instantaneous, inexpensive tool for better coffee. You have a porta filter / Siebträger coffee machine and want to get better coffee? Well… This is the tool you didn't know you needed. Print it (10 minutes) and try it. The…
The model can be placed on a 10-cup beer pong formation to fill all cups with approximately the same amount of water at the same time. For reasons of hygiene, beer should not be used and the filled cups should not be drunk from. You can…
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
I am not good at editing stl file, so I redraw it by fusion360. This distributor fits camlock, because my dust collection all using CAMLOCK system. You may need 3mmx40mm support pins to contact two parts, mid body part can be added many…
I am a great friend of the Varia VS3 coffee grinder! For an optimal result, I always moisten my beans with 1-2 sprays of distilled water before grinding. Unfortunately, this makes them a bit "sticky" and they often don't fall completely…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Distributor and Cone shaped tamper for the excellent Flair Pro 2 Espresso maker. I found that my Flair Pro 2 tend to start dripping from the outside first then to the middle during pre-infusion. So I made the distributor to help me even…
My take on a Anderson Powerpole distributor. The supplied stl files give you some options, but you can use the supplied OpenSCAD file if you want to increase the number of plugs. Part list: automotive fuses fuse clamps ("cable shoes")…
What screams more Halloween than a pumpkin vomiting pieces of candy on demand? This model uses a simple mecanism that makes pieces of candy fall through its mouth when you push the stem in. Thanks for checking out my model! Print…
Give the Gift of Coffee by Making a Donation :) Coffee Aligner: The Story of Creation Origin of the Idea The idea for the Coffee Aligner came from the difficulties faced when aligning coffee beans for espresso making. Espresso cannot be…
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
espresso portafilter 51mm needs a tamper, mixer & distributor, so here you can find all of them beside the base for them
The model can be placed on a beer pong formation with 10 cups to fill all cups simultaneously with approximately the same amount of water. For reasons of hygiene, beer should not be used and the filled cups should not be drunk from. You…
Modular Dust Collection Distributor with integrated blast gates Modular Dust Collection Distributor with each module containing a blast gate for distribution control: Fully designed from scratch using OpenSCAD. Parts: Housing: The main…
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Are you tired of minimalist WDT tools? “Don't buy” the recent shaker cup hype? Hate having to turn a spirographic WDT tool by hand? (ewww manual labour!!) Want a WDT tool that fits over the top of your overengineered Sworks funnel? Do you…
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are…
A motorbike power distributor. In addition to the case, printed in PETG, you need a copper plate measuring 15 mm x 57 mm and 1.5 mm in thickness. At both ends of the copper plate, I punched out two semicircles of 8 mm diameter. A 7mm…
This thing is five way distributor for vacuum or compressed air. It can be used for vacuum tensioning, airbrush or other air applications. I use the part for vacuum tensioning on my cnc machine. To finish the part jou need the following…
2 Part coffee funnel and distributor for Bialetti Mokka - NO SUPPORTS
Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…
You will need two neodynium cylindical magnets (3x6mm) 15 acupuncture needles (0.3x55mm, I used ones with silver handle - just for aesthetic purpose - outermost needle handle is visible through the side of the body) The trickiest part is…
This is an addon of distributor for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). This add on is a complement of : https://www.thingiverse.com/thing:2599638 Print instructions Printer: Geeetech A10 Rafts: No…
A moka pot distributor for 3 cups. It costs US$12 on amazon, so let's save the money.
I made this when I was converting my AE86 to a coil-on plug setup.
I liked the Coffee Grounds Funnel/Distributor for Gaggia Classic by kitahiro921 which I used for what felt like a decade without any issues. The issue with it is that it is not modeled with printing in mind. It requires support and then…
Dieser Verteilerhalter besteht aus zwei modularen Teilen: TPU_DIN: Der flexible Teil des Halters, der aus TPU gedruckt wird, sorgt für optimale Anpassung und Rutschfestigkeit. PTEG_Halter: Der robuste Basishalter, aus PTEG gefertigt,…
This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…
Here's a model that I made for the Frosthaven summons, the Toxin Distributor (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-toxin-distributor-front.png)! As you can tell, this guy's…
This is a plug/bung for the hole on the cam gear cover, near the distributor. Print in TPU for a rubbery-type fitment.
This device is intended to insure that your ground coffee powder is set uniformly before you tamper it. Inspired from earl258's "Coffee Distributor tools for espresso" , I've redesigned it so that you can choose the different parameters…
I joined the 2 parts together. This is more convenient if you don't have the right glue at hand.
Lejek z dystrybutorem do kawy kolba Delonghi 51mm, pla, petg
a thing to hold and pass out your koozies. you better have a dialed in printer that is really good at bridging. when it gets the very back, which would be the top of the print, it has some difficulty with the bridging because of the long…
This Hydroponic Tower Water Dispenser Lid is made for the common 3d hydroponic tower systems found online. It uses a 1/4th irrigation tube for the water line. This will save you an extra module to print (top res or distributor), space,…
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for the GrindDozer Espresso Funnel / Distributor, that you can find on thingiverse too . I would advise you to use (opt. food-save) PETG, since it's…
This is a small decorative statue that allows you to pour 6 shots at once. it is a kit and does not require any glue. The assembly is very simple, thus, no video. The models are put into folders based on their colours.
Cover the area where the distributor used to go, using this part. There are 2 version uploaded: One is designed for using thread inserts with. One is designed for using M6 heat-sert / knurled nut inserts (as seen in pictures). The OD of…
Hi! I made this coffee distributor for the Flair Go. My print: Filament - PLA Layer Height - 0.08mm Enjoy your brew! ☕
I needed a case for the ONPIRA power distributor W2x6H. The case is held close by the mounting screws - M2,5x30 - and can optionally be fitted with a piece of clear filament (PETG or PLA, 1,75mm) as a light guide for the Power LED. Just…
The cooling distributor provides nozzles around the spindle nose without coliding with the umbrella during toolchange. Will fit all 5.2" (132mm) spindles. I have used nozzles with M8x1,25 threads, and they have been purchased here:…
Couldn't find any so I decided to make my own. under-sized the bottom a tiny bit to ensure fit in all 51mm filters. Weight keeps it stable whilst spinning.
Distributor for Glitch Planter - Flat Top - Solid
Instructions You will need to print 8 copies of the part in order to make one complete distributor. I recommend gluing them into 2 groups of 4 and then gluing the 2 semi-circles together. Print settings Layer Height: 0.2mm Support: None…
This is a remix of Sillybutts SillyShell. I remixed the shell to ensure that no more air escaped through the middle of the four darts. I designed a small air distributor that sits in the back of the shell. It funnels the air directly into…
Put the funnel on top of your coffee filter basket, fill in the coffee powder and turn the funnel to distribute the coffee.
A simple distributor canopy for mounting lamps at different spots than the cable outlet.
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
5 darts can't fit all the way back because of the recessed lip of silly shells, so they have to be seated forward. Since they're seated about a cm forward, the back of the shell can be used to redistribute the air to each dart and build a…
For 58mm portafilters (E61). Can be used for both 2-cup and single-cup portafilters. After grinding, tap lightly and turn the funnel. Turning counter-clockwise moves the powder more towards the center; turning clockwise moves it more…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Made this station to keep my favorite tools organized. It might fit other machines, but i only tested my Bezzera BZ10 . The fitting for the hanging part is 3.6mm in CAD. Any 58mm Tamper will fit (58,9mm in CAD) and the other spot is made…
This is an XT60 & XT30 power distributor that can be daisy-chained. There is enough internal space to wire them however you like.
A needle distributor. Perfect coffee results thanks to the even distribution of the coffee powder in the portafilter. Designed for a 53mm portafilter.
Dies ist eine Verteilerbox für Messkabel mit 4-mm-Büschelstecker (auch 4-mm-Bananenstecker genannt) mit 4 Buchsen auf der Vorderseite und 4x4 Buchsen auf der Oberseite. Die Spannung jeder Buchse auf der Vorderseite wird auf vier Buchsen…
The pad fits 58mm coffee distributors and tampers. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
Ein Playmobile Verteiler der mit den weißen Schlauchverbindern genutz werden kann Man sollte ihn in dieser Größe lassen, weil das Modell sonst vieleicht nicht mehr passt Viel Spaß beim Drucken und Benutzen :) A Playmobil distributor that…
Lamp connection Cover Hexagon with central screw connection, so old plugs can continue to be used directly. The cover is available with one and two cable glands as well as 100x40mm and 70x30mm. Lampen Anschluss Cover Hexagon mit zentraler…
My cofee machine Krups EA8250 diagnosed error 01 - means problem with watter distributor. After spending 2 day with disassembling, cleaning and assembling of whole watter distribution system I found out there is problem with gears beneath…
A rather simple coffee needle distributor (WDT) using regular sewing needles, and with two different stands. It supports up to 7 needles. I wanted something with sturdier needles compared to the regular ones that use acupuncture needles.…
Cover for 53mm Coffee Distributor. I am using the distributor for my Sage/Breville Bambino Plus 54mm portafilter but also compatible with that of Breville 800 Barista Series. PETG or PLA (PETG preferred) 0.2 layer height 0.4 nozzle no…
This is a model for a coffee blind shaker. However, I used it also as a dosing cup (weight the coffee beans. Just pull the stem up for the beans to drop in the hopper), as a funnel (sits under the grinder), wdt (has a base that kind of…
Printed them to organize my coffee setup
90 degree 2-way distributor dust collection I printed it with ABS, it fit quite well. Only one M3x25 and M3 nut needed. The adapters fit camlock…
Mounts the current Aldi Power Distributor to a IKEA Skadis Wall. Modell is fixed, the mounting holes a off center now to move the distributor dead center. You need 2 additional M3 Screws and 4 Nuts to counter.
LCD: https://pihrt.com/elektronika/315-arduino-uno-deska-i2c-lcd-16x2 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Prusa, DevilDesign... PETG Post-Printing Category: DIY
The pad fits 53mm/54mm coffee distributors and tampers for my Sage/Breville Bambino Plus and Breville 800 Barista Series with 54mm portafilters. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
This slightly absurd model is intended for use with my already published Levelling Tamper model for the Dedica Espresso machine. (Linked bellow) The entire thing has been proportioned such that the handle sits flush against the guide when…
For "cigarette lighter"-style sockets. Print as shown - no support needed.
Dustcap for use inside the BERU distributors used on many 1990s and 2000s VW and Audi 4 and 5 cylinder engines. Designed to fit the five-cylinder cap on the somewhat rare APL government issue engine. Replaces Bosch part 1 230 500 267…
Printed on its back with no supports, product clicks in there with no glue etc. Used infill modifiers to have more infill on leg connectors.
The bottle top can be screwed onto a wide neck flask with GLS80 threads. The 4 available ports can be fitted with either a GL45 thread or a t-piece for additional ports. All pieces attach by a bayonet lock. I printed in PP for good…
Držák OLED displeje 128x64 https://arduino-shop.cz/arduino/1569-iic-i2c-oled-display-0-96-128x64-bily.html?gclid=EAIaIQobChMIhrrl4pKn5wIVzzUrCh2_-w5yEAQYASABEgISxvD_BwE pro rozvaděč v krytce záslepky. Zabere v rozvaděči 2 pozice. Print…
A small knob for outdoor water distributors. Prints fast in ASA and has an easy fit. Check attached pictures for example applications. Fits a wide range of off the shelf outdoor water distributors. Print instructions Prints upside down…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
Tis is an integrated mount and cover for a pair of Wago 221-415 blocks. Apart from the printed parts, you'll need 6 M3 threaded inserts (3mm or 4mm are fine, but there is space below to allow different screw lengths). You'll also need 4…
Big T had no power distributors with PowerCon input so I just created an inlay for rebuilding the power input.
I have found rack19" power distributors, made from aluminium profile (pic here) and slide-in modules - in my was 3x 3sockets module, and power-switch. Because my distributor have 2 sockets damaged - I trow 3-socket-module and make…
Object Description: Parts for a full or partly replacement of the locking device for a heat distributor flap. The connection dimensions to the flap can be taken from the dimensional sketch. The turning of the knob is limited to 90 degree.…
A simple application for my Printbuchse . Replaces the old distributor plates/Verteilerplatten which are not part of the current fischertechnik program any more. The FreeCAD file is parametric, change the block_len parameter on…
Sick of things rolling off the bench on to your toe? These tools vary in size, mine are for E71 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: 3fillies PETG black Category:…
A “dumb” Usb Type C power distribution thing, for low power devices like ESPs. It uses a Type C trigger board and 4 Type C break out boards. The main advantage to normal type c chargers is that the power doesn't get interrupted for all…
This is a voltage distributor for my shack. Too many banana plugs so I needed to find a solution. I use it for 13,8V with very low total current. Input power can be via one of the plugs or you can drill a hole and connect solder the wires…
Simple base to hold and clean WDT/needle distributors that don't come with a base already. Simply fill with rice and use the distributor as normal to clean the needles. Designed for the 58 mm version (e.g. MHW-3Bomber's one) . If you have…
A little clean storage solution for your Tamper or Distributor. You can easily fit any size up to 58.5 mm in the mat. Forced Tamper like the nomcore tamper fit right on the rounded edge from the mat so the coffee particles can fall off…
Housing to wire 2 Powercon Sockets and external devices. There are different versions for different Rack Panels. 6P (Hole distance: 34,5mm):…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Purpose I have a Brine Distributor Type 2061/2062 from FRANK GmbH. It's made out of plastics and uses some non-standard valve handles. I use the brine distributor to choose between different heat sources for my heat pump, among them an…
Spread salt, corn, sand ect. without getting your hands dirty. No support is needed, if you print it standing up.
A clip for a Brennenstuhl socket strip that the switch is not unintentionally turned off. Easy to clip on without tools. Printed on a Prusa MK3S+ with PLA and a layer height of 0.15mm.
https://www.bkl-electronic.de/en/product/073330 https://www.conrad.sk/sk/p/bkl-electronic-073331-iec-adapter-c13-c14-iec-c14-zastrcka-10-a-iec-c13-zasuvka-10-a-iec-c13-zasuvka-10-a-cierna-1-739605.html
This come from a discussion with a friend who said that bird like to get fur from pets to build their nests. So I wanted a design a bit organic that would be nice to print and then voilà.
![Coffee Distributor for Levelling Tamp Base [51mm Dedica Portafitler]](https://media.printables.com/media/prints/5eb8501d-50c5-4060-973b-a98990194c18/images/11762876_ffebc64b-3910-4176-9108-1b988214cd7e_0564bfe5-71e0-4eb9-b8c3-ef5e1a684ce2/img_1249.jpeg)
