P
PrintablesElectric Fjord
Carvera Air Spoilboard
Model of the spoilboard for the carvera air in various file formats
- Downloads
- 910
- Likes
- 62
- Rating
- 5
Search results: carver
Counting matching models…
P
Printablescumhur onat
Spindle fan for carvera
Use petg, abs or a similar heat resistant filament
- Downloads
- 495
- Likes
- 46
- Rating
- 5
P
Printablesfaecorrigan
Carvera Hold Down Clamp Stepped Riser
The riser block bolts down to the table. For best clamping force place the back of the clamp on the stair just higher than the top of your part as shown in the picture
- Downloads
- 417
- Likes
- 50
- Rating
- 5
P
Printablesfaecorrigan
Carvera Tpu Spindle Fan
When looking at the machine, make sure the fan blades are slanting from top left to bottom right as shown in the picture. There is now a shouldered version stl if you are having issues with the fan sliding up the spindle
- Downloads
- 406
- Likes
- 46
- Rating
- 5
P
PrintablesAlexKelo
Carvera Air Vacuum 45mm Adapter
Made this sleek, stiffened design to connect my DeWalt Stealthsonic Vacuum. Used 4 M3 x 8 screws to attach utilising already existing threads.
- Downloads
- 373
- Likes
- 34
- Rating
- 5
P
PrintablesElectric Fjord
CNC Laser Spoilboard Grid - Carvera Air
There are the DXF files for the Carvera Air size spoilboard, in metric and inches. There are also the fusion files since many people ask for them. I also added premade g-code files for the carvera air with 2 and 6 % power. I recommend 6.…
- Downloads
- 317
- Likes
- 34
- Rating
- 0
P
PrintablesElectric Fjord
Carvera Air Ventilation Vacuum Adapter
This is a mounting plate for the back of the Carvera Air. It converts it to a 32mm out. There is also a few adapter for my Vacuum. https://buymeacoffee.com/ElectricFjord I show it in my video:
- Downloads
- 316
- Likes
- 32
- Rating
- 5
P
Printablesfaecorrigan
Carvera Makera Tool Caddy Mk3
I printed mine with the main face (with the text on it) on the build plate at 0.4mm layer height in hatchbox pla, organic supports with auto detection, and 7% gyroid infill. I had to pick out supports from the holes, but it gives a much…
- Downloads
- 288
- Likes
- 36
- Rating
- 5
P
PrintablesElectric Fjord
1/8" CNC Bit holder with Collar Bits - Carvera (Air)
This is 1/8" Bit holder with Collar made for my Carvera Air. Collar 7.6mm. Large and small version. Both have Numbers going out or inwards. Whatever is preferred. For a single color printer the easiest is just to get the slicer to request…
- Downloads
- 284
- Likes
- 45
- Rating
- 5
P
PrintablesRedGT500
Carvera Spindle Fan Beefy Version
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
- Downloads
- 263
- Likes
- 15
- Rating
- 5
P
PrintablesPaŠe
MAKERA CARVERA drill template for spoil board
A template for pre-drilling of spoilboard for MATERA CARVERA desktop CNC
- Downloads
- 248
- Likes
- 15
- Rating
- 0
P
Printablesfungus_wine
Bit Organizer for Carvera and Carvera Air
Holds 110 Carvera bits, 5 collets and the collet change tool. Note: There are two different files. The larger one fits on a CORE One print bed, and the smaller one should fit fine on a Prusa MK3 sized bed. The only differences are that…
- Downloads
- 244
- Likes
- 27
- Rating
- 0
P
PrintablesYashas Salankimatt
Carvera Clamp 3D Printed
3D printed version of the clamps that come with the Carvera CNC machine. Used when you need more clamps (like when making PCBs) and when you don't want to worry about running through a clamp with a bit. Combine with nylon M6 hardware for…
- Downloads
- 241
- Likes
- 32
- Rating
- 5
P
PrintablesElectric Fjord
Carvera (Air) Brackets Standard and PCB
These models are various Brackets for the Carvera and the Carvera Air. There are normal ones that are similar to the one that comes with the CNC. There are ones that are close to the normal ones, but the holes are chamfered instead of…
- Downloads
- 224
- Likes
- 36
- Rating
- 4.5
P
PrintablesVfr750
Makers Carvera Waste Board
Waste board allowing clamping for Makera Carvera using standard bolt. Made out of MDF.
- Downloads
- 224
- Likes
- 20
- Rating
- 0
P
Printablestdiggity
FoxAlien vise squaring tool for Carvera Air
Ues this with the FoxAlien low profile vise to get things squared up. Vise: https://www.amazon.com/Profile-Workholding-Machine-Milling-Worktable/dp/B08C26KVD3
- Downloads
- 218
- Likes
- 32
- Rating
- 4.5
P
PrintablesKrhom
1/8" CNC Bit Organizer (for Carvera Bits and Others)
Designed it to organize all the bits for my Carvera Air. For all the bits that didn't have a case, I also designed this bit box to give them one: https://www.printables.com/model/1189757-18-bit-storage-case The storage units attach to one…
- Downloads
- 184
- Likes
- 31
- Rating
- 5
P
Printablesbruchsturm
1/8" Bit Collar for Makera Carvera
I made this model for the Makera Carvera in our makerspace. Works fine so far, although it's not as tight as the original ones. For tighter fit there is also a 3mm version of this collar. You may want to print it with more perimeters so…
- Downloads
- 178
- Likes
- 27
- Rating
- 5
P
PrintablesRedGT500
Carvera Tool Holder (Side Mount)
Tool holder to carry the following items: 2X Side Mount Clamps 4X Top Mount Clamps 9X Alignment Dowels 6X Bit adapters / Probe tail shaft adapters 16X Bolts (Up to M6 possible) 12X Bits with standard case 2X Spindle Collets (for various…
- Downloads
- 164
- Likes
- 25
- Rating
- 5
P
PrintablesPaŠe
CARVERA External Vacuum (32 mm) adapter
An adapter to connect CARVERA (MAKERA) to external vacuum
- Downloads
- 160
- Likes
- 5
- Rating
- 5
P
PrintablesSergeBakharev
Carvera Chuck Subplate
This places the center of the chuck in the anchor 2 (0, 0) position. Print the subplate on an angle (30 degrees is ideal) to given it higher shearing strength, and be careful when installing the chuck to not over do tightening it. The…
- Downloads
- 142
- Likes
- 25
- Rating
- 5
P
PrintablesSergeBakharev
Backing Plate for Xin Dian Vise for Carvera 4th Axis
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
- Downloads
- 141
- Likes
- 16
- Rating
- 5
P
Printablesmichanisani
Carvera Bits Holder
arrange the bits , left row used to set the loaded bits inside the machine
- Downloads
- 140
- Likes
- 18
- Rating
- 5
P
Printablesablairlamb
Carvera Air Bit Collars
These are .step files for various bit collars for the Carvera Air (and original Carvera) CNC machine. Included files: 3.175mm (1/8") 4mm 6mm 6.35mm (¼") You may have to adjust for hole compensation on your own printer to make sure it fits…
- Downloads
- 138
- Likes
- 20
- Rating
- 5
P
Printablesfaecorrigan
Carvera Back Panel Isolation 3d Prints
This is a series 3d prints to seal of the back of the makera carvera from chip ingress. The files have been updated to reflect the new version of the vacuum that is common with most machines (the prints completely replace the vacuum…
- Downloads
- 133
- Likes
- 16
- Rating
- 5
P
PrintablesAdamDeltaV
Carvera Door Chip Ramp
Multi-part ramp to prevent chip buildup on Carvera door lip. Requires two center parts to span the full width, so I just duplicated the center part file.
- Downloads
- 127
- Likes
- 21
- Rating
- 0
P
Printablesfaecorrigan
Carvera Collet Install Tool Mod
Print settings: Mk 4 0.4mm nozzle input shaper 10% cubic infill 15% structural preset 5 perimeters external perimeters first No supports I got tired of losing the sleeves to my makera carvera bit collar install tool as well as the hand…
- Downloads
- 119
- Likes
- 22
- Rating
- 5
P
Printablesfaecorrigan
Carvera Toe Clamps
3d model of the toe clamps for the carvera
- Downloads
- 116
- Likes
- 8
- Rating
- 4
P
PrintablesDa BIG One
Carvera Clamp
This is de straigh version of the Carvera clamp. I machined it out of the 5mm thick aluminium that came with the Carvera. You can also 3D print it ofcourse to have a softer clamp that wont hurt your machine when you make a mistake and let…
- Downloads
- 114
- Likes
- 9
- Rating
- 0
P
PrintablesRakayne
Carvera Air Bit Holder
This model contains 12 columns and 8 rows of bit holder pockets, as well as two larger pockets for bits included with the PCB kit. In the front it has numbered round pockets to prepare all the bits for a job. Also in the front is a…
- Downloads
- 111
- Likes
- 10
- Rating
- 5
P
PrintablesCraboulas
Carvera Air: Air Assist 360
The air assist is great for clearing chips and cooling the tool and workpiece. But, having the nozzle out to the side means it is ineffective in deeper pockets and when the workpiece blocks the nozzle. This design slips over the existing…
- Downloads
- 108
- Likes
- 19
- Rating
- 0
P
PrintablesDanGee
tufting carpet trimmer/ rug carver guiding tool
With this guiding tool, the trimming process of your tufting projects is significantly simplified, allowing you to achieve even and clean cuts effortlessly. Based on your experience, adjustments can be made at any time to further optimize…
- Downloads
- 107
- Likes
- 11
- Rating
- 0
P
PrintablesHartner_X
Carvera Bit Holder
Fits 110 Carvera bits, 5 sizes of collets, the collet change tool and a tray for various things. This is a redesign of fungus_wine 's Bit Organizer, slightly compacted to fit beds of smaller printers like the Ender 3 series and similar.…
- Downloads
- 104
- Likes
- 17
- Rating
- 0
P
PrintablesBastien
Carvera Air bits and clamp holder
Presentation Easy to print and setup side mounted bit holder. Store up to 6 bit with it's casing. You can also store your hex screw driver, clamps, screws and pins. Setup Print Right or Left variant depending on which side you want your…
- Downloads
- 103
- Likes
- 13
- Rating
- 5
P
Printablesablairlamb
Makera Carvera Air 3.175mm Collar Guide
I made this simple cylinder guide to use in the Makera bit collar installer. Mine did not come with spacers/sleeves for a 3.175mm (1/8") milling bit, so when I would put one of the collars on with the tool it would sometimes be a bit…
- Downloads
- 102
- Likes
- 21
- Rating
- 5
P
PrintablesHeuboda
Makera Carvera Base Plate
This is the 3D Model of the Maker Carvera Base Plate
- Downloads
- 100
- Likes
- 4
- Rating
- 0
P
PrintablesModel Magic
Die Hard With a Vengeance - Zeus Carver - 1993
Die Hard With a Vengeance - Zeus Carver - 1993 3D printable model.
- Downloads
- 99
- Likes
- 19
- Rating
- 5
P
PrintablesMercy404
Easy Install JST-XH 4-Pin Connector Housing for Carvera 3D Probe
For the heat shrink challenged.
- Downloads
- 95
- Likes
- 22
- Rating
- 5
P
PrintablesCraboulas
JST-XH 4-Pin Connector Housing for Carvera 3D Probe
For those wiring in a 3D probe to the existing wired probe port on the Carvera Air, this will tidy things up a bit.
- Downloads
- 94
- Likes
- 17
- Rating
- 5
P
PrintablesTheseThosesAreThem
Carvera Bit Holder Mark I
This bit holder holds the cases for up to 7 bits. This allows you to have bit holders for all 6 tools in the auto tool changer with an additional slot for a Manual tool (Slider-M). Use contrasting colors for the Main Body and the Sliders.…
- Downloads
- 89
- Likes
- 20
- Rating
- 0
P
PrintablesHeuboda
Makera Carvera Waste Plate
This is a 3D Model of the Makera Carvera Waste Plate
- Downloads
- 87
- Likes
- 4
- Rating
- 0
P
PrintablesRoy Berntsen
Carvera AIR Tool Buddy
Tool holder to screw on to the side of the Carvera AIR
- Downloads
- 83
- Likes
- 29
- Rating
- 5
P
PrintablesBastien
Carvera Air lazer gridfinity storage
Carvera Air lazer module gridfinity storage. You have place for the cable also.
- Downloads
- 82
- Likes
- 12
- Rating
- 4.5
P
PrintablesCraboulas
M6 Bed Plug For Carvera Air w/ SMW Fixture Plate
Print in a contrasting color to your M5 plugs for easy identification.
- Downloads
- 82
- Likes
- 7
- Rating
- 0
P
PrintablesSergeBakharev
Carvera Upright Chuck Subplate
Joe N style alignment, where instead of pins it uses the anchor, makes it much easier to cutout. Just make sure to apply pressure towards the anchor2 corner while screwing it down. The bolt needs a M14x1.00 thread to secure the chuck from…
- Downloads
- 76
- Likes
- 10
- Rating
- 5
P
PrintablesSergeBakharev
Carvera Spindle Tramming Tool
Use this tool to hold a Dial Indicator with a 3.178mm endmill in the Carvera spindle. This works with both the Original Carvera (C1) and Carvera Air. A shorter version of the tool (65mm) works on the Z1 Using this tool you can rotate the…
- Downloads
- 74
- Likes
- 12
- Rating
- 5
P
PrintablesHunter Ligeti
Carvera Vacuum Adapter
Carvera Vacuum Adapter with a TPU part for sealing. I used elgoo PETG orange because I have a lot of it. will also work with PLA. I used 95A TPU other hardness ratings will likely work as well. Use tree supports on both parts, print wider…
- Downloads
- 71
- Likes
- 8
- Rating
- 0
P
PrintablesBastien
Carvera collar tool gridfinity storage
Gridfinity 2x1 storage for your Makera collar tool.
- Downloads
- 70
- Likes
- 10
- Rating
- 5
P
PrintablesCraboulas
M5 Bed Plug For Carvera Air w/ SMW Fixture Plate
Print in a contrasting color to your M6 plugs for easy identification.
- Downloads
- 70
- Likes
- 7
- Rating
- 0
P
PrintablesPaŠe
Alternative dust shoe for CARVERA
Upper part may be printed using PLA or PETH, requires support inside Lower part to be printed using TPE32
- Downloads
- 69
- Likes
- 5
- Rating
- 0
P
PrintablesDa BIG One
Makera Carvera Air Latheboard
Do you also find it so anoying that when you are done with your lathe you find stock for days underneath your bed? That's because the chips and dust go into the hole, you miss some when vacuuming and your holes can get clogged or the dust…
- Downloads
- 68
- Likes
- 9
- Rating
- 0
P
Printablesaquila
Carvera Air Internal Vacuum Pipe Extension
With this pipe you can extend the internal dust pipe to clean up after a job. You can reach almost all build space. The freecad cad file is included for your own mods. Printed upright, so you would need a printer with 260 mm build height.…
- Downloads
- 65
- Likes
- 10
- Rating
- 5
P
PrintablesVerris
Carvera M6 ULP Risers
Modified Fae's risers to allow for M6 ULP screws with the SMW fixture plate.
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
PrintablesRoy Berntsen
Carvera AIR Hose Holder
Replacement part for the suction hose holder on the Carvera AIR
- Downloads
- 60
- Likes
- 14
- Rating
- 0
P
PrintablesKevin Mardirossian
Makera Carvera StealthSonic Vacuum Bypass Adapter for 25mm Hose
I was surprised by how loud my 6 gallon StealthSonic vacuum was when I hooked it up to my Carvera CNC machine. It turned out that the immense increase in airflow through the Carvera's small corrugated tubing was generating more noise than…
- Downloads
- 60
- Likes
- 16
- Rating
- 0
P
PrintablesCraboulas
Carvera Air Indicator Holder
Needs one M3 heat set insert and one M3 screw to complete.
- Downloads
- 60
- Likes
- 8
- Rating
- 0
P
PrintablesLyrkan
Carvera Air Bed Circuit Board Cover
When using some third party fixture plates such as the one from SMW with the Carvera Air it is recommended to cover the tool length sensor circuit board to prevent short circuits caused by metal chips. This can be achieved using hot glue…
- Downloads
- 59
- Likes
- 7
- Rating
- 4
P
PrintablesLeggoMyFroggo
Carvera Air Z ballscrew end cover
A simple cover that can be placed over the exposed end of the Z-axis ballscrew on the Carvera Air to prevent chip ingres
- Downloads
- 59
- Likes
- 2
- Rating
- 5
P
PrintablesRakayne
Carvera Toolkit replacement insert using Gridfinity.
This is a direct replacement for the foam insert you received with your Carvera CNC toolkit. Using this insert, you can place gridfinity organizers however you like. The main insert, that you can't change, holds the screwdriver, pins,…
- Downloads
- 58
- Likes
- 17
- Rating
- 0
P
PrintablesCraboulas
Bed Mounting Bolt Plug For Carvera Air w/ SMW Fixture Plate
Plugs for the bed mounting bolt counterbores.
- Downloads
- 58
- Likes
- 11
- Rating
- 5
P
PrintablesStrebs
Carver Air Vacuum - Henry Vacuum Cleaner Adapter - 32mm OD
Can print without support on my Bambu Labs X1C - slots very well, quite stiff fit (intentionally), so yanking it off would probably tear out the screws before the nozzle detaches.
- Downloads
- 57
- Likes
- 3
- Rating
- 5
P
PrintablesEd
Carvera Air Cen-Tec Vacuum Adapter
Adapt a Cen-Tec Quick-Click vacuum hose to the 22mm vacuum port on the Carvera Air. There's a space for two 15x2.5 mm magnets secured with an m3 countersink screw. The magnets add a little extra security to the press fit of the adapter.…
- Downloads
- 55
- Likes
- 8
- Rating
- 0
P
PrintablesFloppy_Moose
Makera Carvera Air Tool Insert
A 3D-printable tool insert for the Makera Carvera Air CNC that fits the universal phone/tablet mount that is included with the CNC. The tool insert fits one to seven tools including their storage case for easy organization and overview.…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesSergeBakharev
Carvera 4th Axis Riser Blocks
This is designed for the new harmonic drive 4th axis. Be aware that this increase in height is at the reduction of the spindle clearance. The 9mm blocks are the largest you can use on the Carvera Air and see be able to probe the 4th axis…
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
Printablesmichel vaillancourt
carvera z1 spoilboard (waste board)
La carvera Z1 a un spoilboard qui n'est pas disponible sur le site de MAKERA, Il ne faut pas de bordure et aucune jupe.
- Downloads
- 51
- Likes
- 3
- Rating
- 0
P
PrintablesElectric Fjord
Bit Tool Holder for CNC Carvera Air
This is a tool holder for your 3.175mm (1/8") bits so that you can stage your tools! If you want colored text change the color on the last few layers!
- Downloads
- 50
- Likes
- 15
- Rating
- 0
P
PrintablesFlego
Stealthsonic 6 Gal vacuum adapter for Carvera C1
This is a vacuum adapter which converts the 45mm / 1 7/8" Stealthsonic 6 gallon model hose to the 22mm port on the back of the original Carvera C1 desktop CNC. It also has a flat mounting surface for VHB tape or area for screwing in from…
- Downloads
- 47
- Likes
- 4
- Rating
- 0
P
PrintablesJoshua Hogendorn
Carvera Air - Vacuum Adapter - Ryobi
This is a multipart model that adapts the vacuum port on the Carvera Air. I advise printing the elbow on the flat face with organic tree supports. The parts glue together with superglue (split up like this for ideal printing) The magnet…
- Downloads
- 47
- Likes
- 4
- Rating
- 5
P
PrintablesPaŠe
CARVERA (MAKERA) Spindle collets & tool holder
An CARVERA (by MAKERA) accessories holder
- Downloads
- 47
- Likes
- 7
- Rating
- 0
P
PrintablesPaŠe
Carvera UV Lamp holder
Uploaded modified version - better fitting shape
- Downloads
- 46
- Likes
- 10
- Rating
- 5
P
PrintablesSergeBakharev
Carvera Tool Rack Backing
Replacement tool rack plastic backing and supports. Print the flat backing, and bend it in an S shape. Glue on 3-4 of the supports to the outside to keep sharp 90 degree angles. If you have damaged the tool holders, you can order…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
Printablesunpaved studio
Makera Carvera to Festool Cleantec Vacuum Adapter
This adapter connects the 22 mm dust port of the Makera Carvera CNC to the 36 mm Cleantec hose system of Festool vacuum cleaners. It allows you to use a Festool dust extractor as an external vacuum instead of the internal dust collection…
- Downloads
- 44
- Likes
- 5
- Rating
- 0
P
Printablesmarian42
Carvera Phone Holder Mount Cover
This part covers the mounting point on the right side of the Carvera CNC machine where you can attach the Phone/Pad holder. Use this part to cover the mounting point if you don't need the phone holder.
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesSergeBakharev
Carvera Camera Mount
Replace the tablet holder with a camera mount. Remix was to add a 1/4-20 boss as is standard for camera equipment.
- Downloads
- 42
- Likes
- 6
- Rating
- 0
P
PrintablesPaŠe
CARVERA (MAKERA) Spindle collets & tool holder V2
An CARVERA (by MAKERA) accessories holder V2 - added 3mm collet and
- Downloads
- 40
- Likes
- 8
- Rating
- 4
P
PrintablesBbarney
Carvera (original) Vacuum adapter for Fox Alien HFS-800 or other 38mm vacuum
Vacuum hose adapter for the Original Carvera (Not AIR) and the Fox Alien HFS-800 dust exctractor. Should fit any 38mm OD vacuum hose. Fit snugly for me on both sides but you may need to fiddle a bit with scale to get the proper fit out of…
- Downloads
- 40
- Likes
- 3
- Rating
- 5
P
PrintablesCraboulas
Carvera Air Indicator Holder
Print with the large bore facing down and no support. There are 2 sacrificial bridge layers that you will cut through after printing to open the existing slot. Then install a heat set M3 insert and screw.
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
Printablestony
Carvera Air 3D probe storage
A 3d probe storage holder that fits in the current wired probe storage place so you don't need to remove the current plastic part that is really hard to remove without stripping the heads of the bolts. I don't need the current 3d probe so…
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
Printablesfaecorrigan
Carvera Collet Install Tool Ergonomic Handle
There is a better version here: https://www.printables.com/model/966937-carvera-collet-install-tool-mod I made mine in aluminum using the CNC machine and adhered it using loctite, however, it should work just fine as a 3d print. You might…
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
PrintablesTINKLEFINGER
Carvera led acrylic blank
This is a blank acrylic sign for the Carvera-air Led sign project. I made this because I did not want to waste the supplied materials on a random led sign with a smiley face etc. upload the file and include your engraving files on-top.…
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
PrintablesPalmtopper
"Pumpkin Carver" Worker Scar Muzzle Cover
Friction fit muzzle for the plastic 4 lined Worker Scar. Has additional rings for different looks and colors.
- Downloads
- 39
- Likes
- 5
- Rating
- 5
P
Printablesfaecorrigan
Carvera Makera C1 Z axis lead screw bottom cover
I printed mine in PETG but most any filament will do. Two short M5 bolts attach using existing holes. I used M5x5
- Downloads
- 38
- Likes
- 2
- Rating
- 0
P
Printablesloykastj
Makera Carvera side UV lamp mount
Attach to side mount point with the M4 screws. I printed a couple regular short arms (the small arm variant!), and a couple mirrored arms so I had more options to mount the arms in a configuration that I liked. The UV lamp mount I used M5…
- Downloads
- 34
- Likes
- 15
- Rating
- 5
P
PrintablesSergeBakharev
Carvera WiXC WBH04 Pendant Holder
Adapter to use the tablet holder for supporting a WiXC WBH04 Pendant in the original Carvera tablet holder. There is a small slot at the top to insert the metal bracket that comes with the pendant, so that it's magnetically held in place.…
- Downloads
- 34
- Likes
- 4
- Rating
- 0
P
PrintablesFačko - Esk8 with Engineering
40 X 9.5 NO FEAR RED STRIPE CARVER LONGBOARD DECK
created based on real deck
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesPaŠe
CARVERA acessories toolbox (over goggle box)
A box for accessories - screws, screw drivers, clamps
- Downloads
- 34
- Likes
- 1
- Rating
- 0
P
PrintablesBelBuilds
Dwarf Rune Carver – Fantasy Dwarven Smith Engraving Runestone
This Dwarf Rune Carver captures a master craftsman at work, carefully engraving ancient symbols into a massive stone monolith. With hammer and chisel in hand, the sturdy dwarven artisan chips glowing runes into the rock, creating powerful…
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesBlubba
Carvera Caddy
Keep your friends close and your tools even closer. Parts holder for the Carvera CNC: driver, alignment pins, screws, clamps. The first two columns are for the shorter clamp screws. The others are for the progressively longer screws. Does…
- Downloads
- 32
- Likes
- 9
- Rating
- 5
P
PrintablesP.Tech
Carvera Back Panel Isolation 3d Prints and Back Panel Fusion file for CNC cutting it.
This is a modification of the lower parts and vacuum manifolds for the Carvera Back Panel Isolation Mod by Fae Corrigan. You will still need the upper parts from Fae's mod located at…
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesSergeBakharev
Carvera 500w PSU adapter
This adapter plate covers up the previous mounting standoffs in the PSU area, and allows you to install a Meanwell EPP-500-48 PSU in place of the 200w spindle PSU on the Carvera. This is required for running higher power Spindle motors,…
- Downloads
- 27
- Likes
- 3
- Rating
- 5
P
PrintablesPaŠe
CARVERA MAKERA 4th axis module holder
a holder for storage of CARVERA 4th axis once not use
- Downloads
- 27
- Likes
- 12
- Rating
- 0
P
PrintablesPaŠe
CARVERA by MAKERA external vacuum
An adapter kit for CARVERA desktop CNC by MAKERA vaccum module (24V, 100W) https://www.aliexpress.com/item/1005005830855788.html not available any more, choose vaccum source of your choice centrifugal dust separator…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesNoddix
Carvera Air Laser Smoke Remval Backplate for 100mm Duct
Replacement Backplate for the Carvera Air to connect a 100 mm Air Duct for Smoke remval during use of the Laser Module. Includes optional Places to Pressfit 6mm magnets (up to 10) intended to hold the Original Backplate on the Inside of…
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesMitchell Griest
Interlocking Carvera Bit Holders
I created these small interlocking bit holders to help organize the many bits for our Carvera desktop CNC machine. They angle the bits back a bit for easier viewing and snap together nicely with one another to allow for whichever…
- Downloads
- 24
- Likes
- 8
- Rating
- 0
P
PrintablesDa BIG One
Carvera Air clamp holder
Makera provided a nice little box where all this stuff fits in, but the issue was I was constantly looking for some room to place it and open it, and I kept dragging that thing between storage and usage places, so why not put it on the…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesStopper
Carver C7 Bushings
Bushings for the carver C7 skateboard truck. I printed them with Ninjatek 82A TPU with 100% infill as all lower densities resulted in a too soft bushing. For harder TPU's less infill could be tested as well as the infill type.
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesSergeBakharev
Carvera Laser on a Shaft
It can be useful to minimize collisions on the 4th axis to remove the laser from the spindle head, and instead only attach it when required. This adapter plate is secured using the screws on the top of the original Carvera laser to allow…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesMade By Dennis
Carvera USB Camera Mount
This mount can work with either of the following two cameras: Arducam IMX291 Board (recommended. use the -arducam parts) ELP AR0330 Board Instructions: Print: For the ELP camera: camera-top.stl camera-back.stl For the Arducam camera:…
- Downloads
- 20
- Likes
- 8
- Rating
- 0
P
PrintablesFloppy_Moose
Gridfinity fixture for Carvera Air 4th Axis
A minimalistic 9x3 Gridfinity ( https://gridfinity.xyz/ ) fixture that holds the Carvera Air 4th axis module. The fixture consists of 4 corner pieces that each have a cutout for you to easily label. The corner pieces are in total 12mm…
- Downloads
- 20
- Likes
- 1
- Rating
- 5
P
PrintablesBelBuilds
Runestone Carver Scene – Dwarf Craftsman Engraving Stone
This runestone carver scene captures a focused moment of craftsmanship, featuring a rugged character engraving a large rune-covered stone. The composition centres on interaction, with the figure posed mid-action as he works into the…
- Downloads
- 20
- Likes
- 2
- Rating
- 0