Counting matching models…
I was unsatisfied with the backshells available for download, and I had none handy, and I figured it wouldn't be a tough build. These clamp together nicely and are locked together by the SHCS when assembled. They fit Tayda D-sub…
Print approx. €3.48–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for PETGSource material: PET
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
vise block. used for removal of the barrel. protect the finish on your upper receiver while using a vise. vise blocks are about $20 online so i thought ide just use a couple of bucks of pla instead. remix however you like, i did this one…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
This is a remix of another 3D model, check the original out too. This deck box had its internal dimensions resized to: 62x92x40mm (Width x Height x Depth). This means that it should fit regular and sleeved cards (I use 60x91mm sleeves, it…
Reupload from Prot0typ1cal on Thingiverse. Variation on classic iris box with clamshell doors instead of petals.
This is a simple print-in-place protective case for Intel 12th-14th Gen CPUs (LGA 1700). Print instructions Rafts: No Supports: No Layer Height: 0.2mm or 0.3mm Infill: 15-20% 3 perimeters 3 tops 3 bottoms Filament: Anything should be fine!
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
I was looking at a modular bin system for my medication organizer and used it as inspiration to make a tackle box. Each row has 5 bays, and each bin can take up a single bay or multiple bays to hold more. Each bin has a bi-stable lid…
This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…
This model is for a Shellfish gauge specifically used for fishing California, Oregon or Washington Dungeness Crab, Red Rock Crab or Clams. The model prints without supports. I recommend a 0.2mm layer height with a 0.42mm line width. I…
This is very simple yet overcomplicated clamshell battery case for 12 cells. It's print-in-place hing no futher assembly needed. AA and AAA version included. STEP files included for you to modify and remix easily. Print in place hinge and…
I designed this to replace the Apple case logo on the old iBook G3 laptops from 1999/2000(they fall off and get lost very easily after all these years). It can be printed in resin or fdm. I was going to print the final part in resin, but…
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…
Top and bottom clamshell cases for PiBox. Order the PiBox PCB boards and learn more at pibox.io
Isn't it weird that so many of our devices just have unprotected screens? I get real nervous carrying around my uConsole, even in a bag, because I'm worried I'll hurt it. So here is a protective case that flips up from the kickstand…
Clamshell stock for the Mossberg 702 or 715T and Rossi RS22. Currently printing on the weekends will upload photos when done and mod mesh if needed. Elegoo Neptune 4 Base PLA+ 35% infill Supports Normal - Touching build plate
A Clamshell vent cover for Grand Banks boats. Printed in PETG to better resist any impacts and heat it may experience.
Clamshell Fairy House – Undersea-Inspired Fantasy Home Bring a splash of ocean magic to your prints with this whimsical Clamshell Fairy House ! Nestled under a beautifully detailed seashell roof and surrounded by flowing seaweed and…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
Case that holds six 3DS or DS cartridges. Print-in-place hinge. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: Printed in PETG Category: Video Games
Don't let your headphones get crushed in the bottom of your bag with this protective case. It will likely work with many models, but I specifically designed it for my Sennheiser-EPOS Adapt 660. I also tested it with a friend's Sony…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
In the 2022 season, Triple Helix mounted REV SPARK MAX motor controllers and a CAN connector board to some 3D printed shields which attach to the side of the MK4 swerve module from Swerve Drive Specialties. This makes the module a…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case.
Print-In-Place Clamshell Container for Multi-Material or Single Color Prints Please click the “Like” button above if you like this model, and if you print it please share a make/comment - I love seeing them and it keeps me motivated to…
*UPDATE* Added an internal space on the far side of the hinge to accept a 3mm x 3mm cylindrical magnet on each half of the clamshell to more securely keep it closed. To add the magnet, you must stop the print before this cavity is closed…
An open-source clamshell holder generator for openGrid , using the openConnect system. The holder can be used to mount objects either under a desk, often in combination with the Underware system, or on a wall. A common use case is holding…
A simple but pleasing design to store Super Nintendo Entertainment System / Super Famicom (SNES / SFC) cartridges in a VHS clamshell case. GitHub
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
A clamshell vent cover for Grand Banks boats. Printed in PETG to better resist any impacts and heat it may experience.
Print flat side down. Use the printed washer on the flat side when mounting. A bit of grease on the axle is probably a good thing. Original wheel also shown in the pictures. Example print in PETG. No need for a bearing. It rolls very well.
This is an update for the Clamshell design by blckbear. Two ‘stop’ features added to the box. These avoid the lid from opening by itself. Also, the models are scaled 2% bigger. Sleeved cards fit now perfectly. Additionally, a card…
Easy print-in-place MONSTAH clamshell containers! No supports necessary. Just slice-n-print! Scale if you want! Size guide in the pictures. Feed your MONSTAH whatever you want and keep 'em safe!
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
By popular request (well maybe just one person), I created a roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. 3rd picture…
This model is a remix based on Nick Johnson’s Clamshell Parts Box, which itself remixes Josh-3D’s Small Parts Storage Box. Original models can be found here: Nick Johnson's contributions Josh-3D's original model The original clamshell…
This a replacement insert that is used by the clamp on the lower section to hold the shop vac together. It seems DeWalt has two parts for this part number. One with wider pin and one with narrow pins. Both versions are included here.…
Pre-Ordered a Framework 16 Laptop with Radeon 7700 graphics and wanted to use it in clam shell mode with cooling on the back side of the laptop, so I designed this. I heard rumors the Frameworks can't be run in clam shell mode but the…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
This is a clam shell case for 2242 SSD's created in the same style as SD Card clamshells. Required Materials : 8g of filament Assembly : Be careful removing supports from latch. Carefully fold at soft hinge. Version Notes : 1.0 - Original
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
This case is for a Texas Instruments Tiva C series Launchpad, and was modeled off of the EK-TM4C123GXL. Print Settings Printer: Flux Delta Rafts: No Supports: No Resolution: .25 Infill: 5% Notes: I used such a low resolution with a low…
Just print it on its side with the carabiner hole facing down. No supports needed. Tested with PLA and PETG. Works fine with both. PLA is a little stiffer tho. Have fun with it :)
One print, zero assembly. The hinge and the latch are printed straight into the part. Lift it off the bed, fold it shut, and it clicks closed. No pins, no magnets, no glue. I wanted something that survives a school bag better than a zip…
A basic clamshell deck box based on a similar container that came another game I have. I have uploaded several sizes that hold a standard poker deck, double sized cards like the Transformers CCG, Sleeved magic cards and a custom size for…
A simple clamshell pip box, originally for multiple specialist sleeping ear plugs but ‘hy-jacked’ for jewellery. Cavity is crudely 80mm x 40mm depth 16mm (2x8mm clams) Requires 2 x 8mmx2mm magnets which are a push fit, plus a dab of…
I printed Simple3D's cover at 100% in PETG and it fit great. I decided to add a second piece to cover the bottom side of the lens as well. I had 8mmx3mm magnets on hand, but I will include the step file and Fusion file in case you want to…
I made this holder so I could store my Atari VCS/2600 cartridges inside VHS clamshell boxes. The holder is the size of a VHS tape, so you can just drop it in, but I suggest gluing it to the case so it doesn't rattle. Category: Toy & Game…
I made this vise block to clamp a ½" -14 NPS thread paintball inline regulator in order to assist in removing a seized top cap so that I could rebuild it. This could also work on HPA tank regulators since the threads are the same, but…
A case made specifically for my matching pair of prescription eyeglasses and sunglasses, and not a bit larger. Shock-cord (leftover from an elastic shoelace kit) is used to stitch the two pieces together and to form a closure. Felt is…
Simple full-cover for the Elegoo Mars- and Anycubic Photon-tanks. Oversized by ~1-2 mm as I'm adding sealant around the inner edges. Print in any orientation your printer is happy with, some sides might be too long and warp depending on…
10/13/2018 - Updated the Breakout Box to allow for better ventilation. The original version is still in the list of files for those who want to use the original. This is a breakout box mount and clamshell for the HTC Vive. This has been…
I'm not entirely sure why we're opting to keep these baby teeth, but we have. Add your child's name as text in your slicer then print this one-piece assembly off. Line the name text up on the underside of the 'top' half oriented so that…
I use my laptop a lot whit my monitor and dock in clamshell mode. But it occupies a lot of space on the desk. So I designed this stand to keep it upright. It has an aluminum bar connecting the two plastic pieces togheter. The bar is an…
This bracket holds a Mele Quieter 3C to the televue clamshell. I had to move from using the vixen dovetail mount design because I put a finder scope there instead. The bump on the side of the bracket indexes into the 3.5mm headphone jack…
This is a parametric design for a telescope clamshell. The sample STLs are for use with a standard Synta-made 80mm f/5 telescope OTA (branded Orion, Sky-watcher, Celestron, Omegon, etc.). One set includes a standard Synta finder shoe, and…
Does not include any charging facilities, just enough space for the earhooks and your IEMs. Designed to be a snug fit for iFi Go Pods (original, Air, and Max all use the same size earhook) but could probably fit other earhooks too. You…
⚠ Status: design-complete prototype, not yet fully printed. Geometry validated with PLA test pieces (tube-bend jig, PSU pattern plate, joint samples); the full case has not been printed and assembled yet. Publishing now to gather…
I have remodelled the part using the original as a reference so that the bottom part is actually flat and can be used to print the part standing up without using supports. I have printed mine in PETg and they seem to be working fine,…
Transform your Clamshell Parts Boxes into stackable items with this efficient remix. This topper adds a 2x2 stackable Gridfinity base to the top, allowing you to maximize storage and organization. Designed as an alternative to existing…
Brackets for connecting the Pegasus Powerbox Advance v2 to a Mele 3C and the whole thing to a Televue clamshell
No supports required , 80x80x12mm single shell inner dimensions, 2.5mm walls, around 10.5mm usable depth with retainers installed. Orient the top/bottom pieces on the flat side . To make sure the case closes properly align retainers to…
This is a small Genesis/Mega Drive/Sega Master System game clamshell case display stand. I had trouble finding one so I set out to design one that uses the least amount of filament and time. You won't find a smaller one. It only has a lip…
A protective case to take your Coralboard SL to school, work or a demo. Base, lid and hinge print together in one go, and the lid opens all the way (180 degrees). Two side latches keep it closed in your bag. All ports stay reachable with…
A tiny laptop made from an iPhone 12 mini and a Torima M7 mini Bluetooth keyboard. The keyboard sits in the base, the phone in the lid. Closed it's 138 × 81 × 24.5 mm. Two lids fit the same base: lid.stl: the phone drops in and MagSafe…
Keep your motorcycle papers together without a bulky wallet. Sized for a folded Ontario green permit + pink insurance card stacked in one tray. Print the base and lid, snap shut. Fits - Folded paper ~91.9 × 63.0 mm - Cavity 94.9 × 66.0 ×…
Case to house an Anex Offset Driver, 1/2 drive adapter, 1/4 drive adapter, screwdriver bit adapter, short body bit adapter, and a small prybar. This is a great tool, but couldn't find a case that held it and all the assorted pieces parts.…
A two-piece clamshell sleeve designed to increase the grip diameter of standard Olympic adjustable dumbbell handles (25.27mm) to match the feel of fixed dumbbells (~33mm centre, tapering to 28.5mm at the edges). M3 Screws or small cable…
Embossing was done in the slicer, not on the model. Feel free, do what you want with it. Fits my 13" Macbook Air M5
Clamshell templates with the 1/4" seam allowance built in. Draw round, cut with scissors, match the notches, sew. Files STL : set_default.stl (the 4" clamshell). Plain mesh, any slicer. 3MF : clamshell_4in_quarter_sa.3mf,…
A hinged case built around whatever goes in it. In this case, the case is for a mid-size set of headphones with the interior sized at 200 x 190 x 45 mm (7.9 x 7.5 x 1.8 in). It prints in 3 pieces and clips together. The hinge is…
Open it up and it is a tiny handheld computer: the badge is the screen, the Qw/ST Pad is the keyboard. Snap it shut and the screen is protected in your pocket. Fits Badgeware Tufty 2350, Badger 2350 and Blinky 2350 (built around…
A detailed Parasaurolophus skull that splits at the mouth seam and swings open on a hidden snap-together hinge , revealing a small interior pocket. A little keepsake capsule — stash a pill, a tiny charm, a ring, or a tightly rolled note…
Just print it on its side with the carabiner hole facing down. No supports needed. Tested with PLA and PETG. Works fine with both. PLA is a little stiffer tho. Have fun with it :)
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
Carry your smokes and lighter wherever you go! The Tokédex conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going, picnicking, you…
Case to house an Anex Offset Driver, 1/2 drive adapter, 1/4 drive adapter, screwdriver bit adapter, short body bit adapter, and a small prybar. This is a great tool, but couldn't find a case that held it and all the assorted pieces parts.…
A two-piece clamshell sleeve designed to increase the grip diameter of standard Olympic adjustable dumbbell handles (25.27mm) to match the feel of fixed dumbbells (~33mm centre, tapering to 28.5mm at the edges). M3 Screws or small cable…
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
Downloadable digital files for the NANO DOME V2 , a 3D-printable clamshell dome designed for compact smart telescopes such as the ZWO Seestar S50 , Seestar S30 , Seestar S30 Pro , DwarfLab 2, 3 and mini The full assembly documentation…
Updated August 1, 2026: After some feedback, I made a couple of small changes to the design- Tweaked the geometry to make the cover much easier to disassemble. It can now be assembled and disassembled many times without damage or wearing…
Howdy, wonderful people! Someone recently asked me if I was going to make a case for the new Raspberry Pi 5 single-board computer. I didn't even know there was one! Fortunately, my local electronics supplier had just got stock, and so I…
Howdy, wonderful people! The clamshell case for the Raspberry Pi 5 had a great response, but the most common one was "are there versions for the Raspberry Pi 4B and Raspberry Pi 3B?" And now there are! And there are some bigger - chonkier…
