Counting matching models…
Mount your Airsense 11 CPAP machine to the wall to free up night stand space. Water reservoir is easily accessible. Incorporates hooks for holding the tube up. I printed this on my Ender 3 V2 with .28 resolution, 3 walls, 5% infill, using…
This is a print for a bracket to mount a hose. This is designed specifically for the ResMed Climate Line Air 11 hose but as most hoses are universally sized I'm sure this will work for most. I included two prints, one has an inner ridge…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Regenerative compressors provide good pressure head and medium flow at low RPMs. I designed this one from scratch in Sketchup to play with the concept for potential CPAP cooling on my printer. It starts to build pressure head at fairly…
This print is to hold a CPAP mask and an additional headband. The shelf is flat on top and curved on the sides to brace the head tubing properly. This is designed specifically for the ResMed AirFit P30i Nasal Pillow mask but will hold any…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
First of all, thanks to "ogland" for sharing. I like this simple design very much, but it is not very suitable for me. I will make several major modifications on this basis. Adapt to Mellow Voron-Kit de extrusora Stealthburner Orbiter,…
Wall mount for AirSense 11 CPAP machine. Holds CPAP machine very securely, very stable and strong. Mounts to wall using size #6 round head drywall screws. Simply mount to wall and then slide in the CPAP machine from the left side. The…
Mammoth-3D CPAP Muffler: Reducing Noise by 13 dB with 100% Airflow for 3D Printing Part Cooling The Mammoth-3D CPAP Muffler is specifically designed to reduce the noise generated by the cooling fan ( 24V Brushless Centrifugal Air Blower…
This project wouldn’t have been possible without the support of the CN3D community and partners like Polymaker & BIQU — thank you all! The CN3D Y-CPAP Toolhead is a compact, high-performance solution designed for serious airflow and…
The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…
In order to use the Klipper firm through the Sonic Pad on the Creality Ender-3 V3 SE printer and the vibration sensor for vibration compensation, you need parts to connect the sensor. This data is a guide case file for connecting a…
This is a mashup to have a toolboard with an CPAP hose, a PG9 glad thread for a CAN cable and a thread for a pneumatic fitting to hold a PTFE tube. Additional, I made the CPAP muffler from the VZbot fit, to silence the CPAP fan a little…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
This print is for a cradle to hold the end of the CPAP hose when not in use. This was designed for the ResMed Climate Line Air 11 hose but should be usable for most CPSP hoses as they are very similar in size. I used a #6 x ¾ screw to…
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Had a hard time finding an adapter or manifold to use 5015 fans in conjunction with 19mm CPAP tubing for a remote part cooling setup. The few I found wouldn't work with how I have my gantry set up, so I went ahead and modeled this one. So…
Substituted the 5010 part blower with a much more powered WS7040 blower
I had nowhere convenient to hang my CPAP hose and mask when not in use, so I made this. Designed to fit standard CPAP tubing, but slimline should work as well.
You can find the build instructions and links for components in the article: www.modernmakes.ca/blog/cpap-fan-eva3 Full guide on installation and setup here: www.modernmakes.ca/3d-printing/cpap-fan-guide
I modified my last Mantis TAP toolhead to now support Simon Vez's Goliath hotend. I'm using CPAP on this but it has the standard mantis fan mounts if you want to use the original Mantis 5015's, but you will need to get the correct ducts…
With hardware (4 m3x8 SHCS) this solution should weigh roughly 13 grams. I designed it with the attributes of polycarbonate in mind. - I have only printed it in polycarbonate - If you print it in another material please let me know how it…
eva 2.4 with nf crazy/mosquito hotend and CPAP support and 5015 fan, bltouch mount on the back. plenty of variation on the back. designed for vzbot by vez. I don't know if it will work on other printer. the top you can use any top from…
Stock CPAP Turbo Fan Silencer
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
This is a mount for the WS7040 fan and its driver PCB. It is meant to fit on an aluminum extrusion. Tested to fit a Voron 2.4 but could probably fit several other printers as well. I've tested it to fit at the back of a Voron 2.4's gantry…
This is a Voron Stealthburner for a Rapido UHF with A CPAP and a toolhead PCB. Please note that I didn't print it myself but did only the CAD work. If you encounter problems or see ways to improve the construction, please let me know. You…
I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…
This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…
Forked from https://www.printables.com/model/149491-cpap-hook Added screw hole. Prints on its side with no support. Works with ResMed heated tubing.
This silencer reduces the noise of the CPAP Turbo Fan which is very noisy without altering the air intake. Needed: 6 magnets 5x3mm 1 M3x8mm screw 2 M3x16mm screws
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
Die Befestigung an der Wand erfolgt mit einen 6er Dübel und einer Senkkopfschraube.
A simple wall hook to guide the CPAP tube above your pillow. Inspired by the model https://www.printables.com/cs/model/149491-cpap-hook The hook is on a tube with a diameter of 22 mm. It also has a mask hook when not in use. Printing on…
First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself. To be honest, they would have to be varied depending on the motor you have, and the gearing that works for you. Also,…
I had an issue with my CPAP hose falling behind my night stand. I designed these clips to position the hose up securely, yet mindful of the delicate nature of the hose. PLA is plenty strong enough. Use 4-5 shells. I used ABS for…
This design works better for my cpap machine. The hose would blow off at night, thus the clamp. I used OVERTURE filament because of it's strength tendencies over other PLA's. You can resize to anything you want, but right now it's…
Simple design I modeled up to better route my CPAP hose and give me a place to hang my mask. My original design is tailored for my headboard, but some folks expressed interest in the model. So, I've made it more universal so that you can…
Drying adapter I designed for the Resmed CPAP hose - fits shower fittings 20mm or less in diameter
This silencer reduces the noise of the CPAP Turbo Fan which is very noisy without altering the air intake. Model can be printed without support. Needed: 6 magnets 5x3mm or 6 magnets 6x3mm Glue
The original adapter here was unnecessarily long. To save space in my pack, I redesigned it in Fusion to be 18mm shorter. It also has some fillets and chamfers which make it less poky. Print with the narrow side down. No supports needed.…
Case for ResMed CPAP air filters
I wanted to retain as much Stealthburner functionality as possible (2-part PCB & Tap), while also enabling remote part cooling. All of the other attempts to solve for this did not have enough clearance between the duct and the PCB, so…
Since there was no mounting option for the BigTreeTech Universal Turbo Kit (CPAP) that I liked, I made this one. Since there was no mounting option for the BigTreeTech Universal Turbo Kit (CPAP) that I liked, I made this one. Printing…
Coupler for keeping CPAP hose together so it doesn't come unhooked in the night. Also likely good for extension cords or any other connections in need of reinforcement. Separate variables for: Internal length Overall internal diameter…
I wanted a rear exhaust that worked with CPAP and also had a HEPA filter + carbon pellets. This is my solution to my own problem. Please let me know if you have any troubles printing this model at all. I haven't tried this design out for…
I saw a clip design that reminded me I needed a hose clip for my CPAP to prevent the hose from scraping the ground and making noises during my sleep. I keep my CPAP in my night stand drawer to minimize clutter so a hose clip on the side…
The cap can be printed in any material and without any supports, if it is flipped upside down. For the adapter use TPU. I used SainSmart TPU with 95A shore. I added a cable tie for extra security, but the friction should be strong enough…
Edit 2/14/24: Updated wiring/config for proper signal to the fan. Cpap will no longer kick on from power-on until OS is booted. #CPAP [fan] pin: PE5 kick_start_time: 0.2 off_below: 0.2 cycle_time: 0.005 shutdown_speed: 0 max_power: 1…
Nice fitting enclosure for CPAP cooling fan driver with din rail mount. Mount taken from Voron Design. Designed for self tappered m2x10 SHCS (4 pieces), but you can edit STEP file for your need.
The ws7040 fan has not found a better way, so I designed this simple version of the fan mounting base, the driver board is installed behind, if you have a better idea, please let me know. Installation requirements: If the fan is installed…
Fun accessories for my regenerative compressor design! All fit a standard 22mm CPAP hose end. Only the venturi vacuum needs supports. Demonstration video:
9/4/22 - Added RatRig dock and 4mm offset variant.
This is so you can connect two 22mm ("normal") CPAP hoses in case you need to extend them for some reason.
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
This adapter replaces the standard part that connects the Resmed Airsense 10 heated hose to the headgear. I used Dreamware headgear as the model and designed this adapter from the end of each piece to replace a missing adapter. This may…
A simple bracket to route a CPAP hose along the top of an IKEA Malm headboard. The back side that holds the hose is open to allow for easy removal. There are 2 version, one is designed to go around both sides of the headboard while the…
CPAP Fan Mount noise attenation.
I was rather frustrated that my CPAP didn't have a clock and my Google Nest Display was on the other side of my lamp. I used PETG as the filament, 15% infill. The model snaps together. I wouldn't recommend glue them together as it will be…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
This is a remix of eroedig's design for a bracket to mount a CPAP hose, specifically for the ResMed Climate Line Air 11 hose, but should work for other “universal” hoses. The original has two versions, one with an inner ridge and one…
First of all, thanks to everyone from Armchair Engineering and to tktktktk VT.1020 from Voron Discord for designing the duct. It is my iteration of the Xol2 Rapido HF + CPAP. The design has been tested and works pretty well. Please let me…
I found the original version just didn't work with my setup. The mask would hang weirdly over the hose. This is the same as the original but with the hose on top and the hook on bottom. I printed in PETG with the largest layer lines…
There are a few CPAP adaptors available for Stealthburner, but they typically either completely alter the look of Stealthburner, or they leave behind unnecessary features in the model like provisions for a 5015 blower fan. I've shed a…
Refactor of the RatRig electronics_wire_guide_rear to support a CPAP hose.
Based on vzbot fan duct design, created my own low-cost version which uses two 5015 blower fans instead of using WS7040 printed with ABS or PETG CPAP hose I use https://a.aliexpress.com/_mM4FWka https://github.com/VzBoT3D/VzBoT-Vz330 Buy…
I designed this brand new fan duct because I found my Voron 2.4 with Stealth burner is seriously lack of cooling . Moreover, as I really found disassembling my print head from time to time is truly annoying and troublesome , I designed…
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
I wanted to make a stand for the SonicPad that wasn't on the side. The ideal position for me would have been central so as not to take up any more space. I have seen other supports that provide for the top mounting of the Ender S1 3 PRO…
Prints flat on its side no supports needed
cpap duct for VZBot alu printhead with Quickdraw v2 by annex
Post your prints. This seems like a solid replacement for much more expensive off the shelf hose dryers. Only supports needed are build plate to accommodate the two notches in the part that fits into the fan exhaust. CPAP machines need to…
I wanted to incorporate remote part-cooling, while also retaining the slight negative chamber pressure that was generated by the exhaust fan.
VzBoT CPAP Fan Duct and upper duct. For best visual quality, print with a layer thickness of 0.12 or less.
I created a simple CPAP hose wall mount bracket that can be attached with screws, double-sided tape, or command strip to your wall or headboard to elevate and route your hose above your head. I used one medium size command picture hanging…
A friend of mine asked me to make him a hook for his 22mm CPAP hose. I was not happy with the existing models, so I quickly made this lightweight design for him. The hose snaps in nicely and sits firm but not too tight. There is one…
Remix of the Mantis toolhead to keep some of the features I liked from the SB
Hello! There is a modified backand toolhead mount to accomodate a CPAP cooling solution for the RatRig Toolhead on the VCore 4. It does require for the current plate to have the 4028 mounting part cut (cutting template included) as it…
Hook for a CPAP hose, It has a slight ridge inside that stops the hose sliding out. These sell for about $9 on Amazon and cost $0.56 to print :-) Attach to the wall with a 3M command strip.
Edit 9/6/25 - added options for 60mm fans. This model allows you to hook up a 40mm (or 60mm) fan to blow air through your CPAP hose to help dry it out. Hose end of adapter tapers from 22mm to 22.5mm and fan side holds a 40mm fan (screw…
Print this hose coupling solid in PLA. Use boiling water to install on to the blower as shown in following video. This is one of the building blocks for the Magnetic IDEX printer. Fabreeko Link: CPAP Fan 10ws7040 & hose by Mellow…
NOTE: This is compatible with standard rubber hose connectors (default 22mm, but it is customizable). If using the Resmed Airmini, or other travel CPAPs with non-standard hose connectors, an adapter will need to be used. Introduction…
I got sick of my CPAP mask sliding up off my head every night because the headgear doesn't actually hold onto anything at the back of the head. This adjusts the angle downward so that the headgear can cradle the base of the skull and is…
***Please be aware that I did this mod on my Rook 2020 that is using 250mm for the Z Extrusions and Rods. My build volume is 120mm(x), 120mm(y), and 155mm(z). I'm not sure how it affects the Z if the mod is applied on a stock Rook 2020.…
The design is intended to have easily swap-able cooling ducts so better duct designs can be installed in the future. The design is for the CHC Pro hotend. Recommend using a WS7040 fan with this enclosure:…
A mod that allows you to use a 120MM fan for CPAP. This mod cost me ~$30 USD. Update: Some users seemed to have have issues with a small gap once printed. I made an adjusted come to hopefully help solve this issue !!! IMPORTANT NOTE !!!…
This helps keep the tube out of my way while sleeping. Created in fusion 360. I've included the parametric files for remixing. Prints in place. Orient one of the ends on the build plate. I used supports but they're not really needed.
Quick modification to Mammoth-3Ds CPAP design to work with the BTT kit. This will be more noisy than the original but you can use the filter that comes with the kit. It also provides a place to mount the additional PCB. This is designed…
Modified and redrawn to hold a 19mm CPAP tube
Small clamp which creates a loop, shortening the CPAP mask strap for a better fit. Printed in PETG, no supports. Use a screwdriver or similar tool to stuff straps into the toothed slot, then pull loop to adjust.
Hero Me Gen7 CPAP dual ducts Use with 18mm internal diameter CPAP hose. Cheap hose: https://s.click.aliexpress.com/e/_Dcjs6K7 Update 2023-12-02 Added a STEP file as requested
To accommodate the Airsense 10, I needed to extend some dimensions and make some cutouts. I used a 30% gyroid infill overall, but increased it to 50% in the vertical section that may have higher stress. Probably overkill. 30% should be…
UPDATE V1.1: I noticed some things weren't reflected in the model. FIxed and reuploaded. Reference model of CPAP blower fan model 10ws7040 often sold by Mellow as a part cooling solution. You can get this fan here:…
Clip for drying CPAP hose for AirSense11 hose. Designed to clip over a 10mm glass screen. Print without supports in PETG or PLA, .6mm Nozzle and .35 layer height. Version 1.1 Updated model with a support at the back to strengthen the clip.
My IKEA Malm headboard is thinner by almost 1cm than the original model. I had printed a block to shim it to fit for the 1st CPAP user but the grip diminished over time as the PLA crept under the stress. Eventually, I taped the holder in…
CPAP adapters for fan 4028 4020 4010
This is an adapter to connect a standard 22 mm CPAP tube to a Conair Testarossa hair dryer. Printing instructions Print the .stl file as-oriented. There's not a lot of surface contact area; you may have first layer adhesion issues…
The holder is for the PcPanel Mini . It is attached with 2 screws and the PcPanel Mini is simply pushed in.
