Counting matching models…
3D-Printable Microphone Stand for Shure SM7B, SM7dB or many others. Elevate your audio setup with this custom-designed, 3D-printable microphone stand, specifically tailored for the Shure SM7B and SM7dB microphones. Whether you’re…
Print approx. €4.95–€6.06 excl. taxPreliminary estimate for PETGSource material: PET
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Just an other endcap for an 30x30 aluminum profile Print instructions No support No raft Printed with HD-Glass
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
DIN rail endcap to mount it between two parallel surfaces. I intended to use to mount a DIN rail with some power supplies and relays between to legs of a modified Ikea Lack enclosure. Update 2024-04-25: Added v5 with modified 50mm hole…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Endcap for square steeltubes 20 x 20 x 1,5 mm. Update 26.8.2023: Added Endcap2 for a tighter fit.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…
Knob 3D model size: X 11,16 × Y 9,99 × Z 2 mm
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I needed a different location to mount my ESC while putting on a custom chassis and moving the battery rewards on my Redcat RDS….so I created this little table that bolts directly on top of the battery mount! Easy! I printed in PLA,…
EN: Universal (right-left) countertop trim (LB23) endcap PL: Uniwersalne (prawe-lewe) zakończenie do listwy przyblatowej (LB23) Includes STL v2: Slightly improved the fit, fillets and chamfers. Print instructions 0.1mm 100% infill
The Sandcastle Builder Set is a delightful 3D printed beach toy collection designed to enhance your beach adventures. This set includes a vibrant bucket, a sturdy rake, and a versatile shovel, each crafted to inspire creativity and…
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
I thought that this is a good place to remind me the Deming wheel. 3D printer is very good for quick prototyping, but some planification is good anyway. You can use 5x5x5mm magnet to attach and two M2 bolt to stabilize It is made in 5…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
The Modular Attached Storage Stack ( link ) is a compact 3D printed NAS enclosure with expandable bays support up to 8x 3.5" + 3x 2.5" drives. 👉For the premium version of MASS with additional features, please see MASS Premium Page here .…
(Printed in Fiberology PCTG Onyx, Clas Ohlson PLA Gray, Bambu Lab PLA Black) This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
Another endcap for 2020 extruded aluminum
A sandcastle I made to test the Fillamentum's Mukha -filament. Prints support free. Timelapse:
I made this hardcase for my multimeter and the accessories, but can used for other purpose
Spool ends for the AD5X to add numbers, shaped to the spool spindle ends. Useful to show spool number which are hidden once you mount filament. Original designer did a great job sizing the posts for the print to clip in to existing…
>>>>>>>>>>>> NEW Version 2.0 is available here. <<<<<<<<<<<< ------- This is the older version 1.x. Click here to get new model. This hardcase lets you scale it to suit you needs. Model is free. Please consider uploading a photo of a make…
HyperX QuadCast Boom Arm Adapter 5/8 inch adapter to attach your HyperX QuadCast to mic boom with 5/8inch screw
a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…
These are non-marring TPU endcaps that slide over the top and bottom of happymaker 's Adjustable Height Support model. The bottom prevents the base from slipping and the top prevents the part from scratching the lifted item. There is a…
This tray replaces the owl that is provided with the CR Scan Otter and allows for storage of up to 12 magnetic markers. I modified the marker pyramids to use magnets with a diameter of 6mm and a thickness of 5mm. But the original pyramids…
It should be easy to put the drone in and out of the box. Therefore, this is not a "lid" design, but two halfes. You can easily grab the drone when the box is open. Have a look at the YouTube video: https://youtu.be/qLaCz_ccFZk The main…
This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…
This model is compatible with the lego system.
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…
These are a Remix of the amazing models by TheSameNameTwice. I adjusted some of the belts so that everything would work in a true grid as well as new dovetail geometry, a new end cap for side loading, and holes to allow easy color swaps.…
Aluminum Extrusion 2020 Endcap
Since Jevermeister's holder refused to fit my DIN rail (standard 35x7mm) I decided to remix his models. I decided to go for the following changes: widened the profiled hole for the rail itself shortened them so they will not interfere…
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
Don't we all know this problem? You're tying your shoes and suddenly the little plastic piece holding the string ends together, flies off into the sunset as you pull the strings tight. Oh no - the strings will start fraying and pull apart…
NOTE: This model is created to fit quite snug, so in order to account for filament shrinkage you might have to scale the model up to 101 or 102% Print with .12 layer thickness. enable tree supports. Make sure to clean the inside of the…
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
There are 6 parts of 3D printing drawings Jsaux provide 1. A Deckmate adapter, after using this part you will be able to use Deckmate accessories on the ModCase system. 2. An Hard drive adapter with its own adapter to replace the ModCase…
The Lancaster has its origins in the twin-engine Avro Manchester which had been developed during the late 1930s in response to the Air Ministry Specification P.13/36 for a medium bomber for "world-wide use" which could carry a torpedo…
This is a VORON style endcap for Misumi Voron 2.4 2020 Extrusion.
Wanted a printable endcap to match the color scheme of my printer. Also wanted it to allow for flush sitting of my ender 3 essential holders. Well this does just that. Needed to remix the original and removed the longer side inserts for…
This is a model for an end cap of a Thule Omnistor 5002 awning. Dies ist ein Modell für eine Endkappe einer Thule Omnistor 5002 Markise. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2…
I used these on my V-Core 3 to mount the DIN Rails without having to drill too many holes into the rails itself. Beside of that, they look pretty neat. My DIN-Rails are “Weidmüller Tragschiene TS 35X7.5 2M/AL/BK 0330800000” I printed…
rollbar and flatbed for the ascent use the shocktower mounts to secure the bed, rollbar screws in the bed with 3 2.5x10 (reused screws from the ascent) supports screw in the rollbar with 2 2.5x10 (also reused screws)
A simple DIY collimation device for reflecting telescopes that can be constructed for about 1/10th the cost of commercial solutions. The main components are a USB Arduino Web Cam , a 42x0.75mm threaded extension tube and a 3D Printed…
Hardcase to scale to fit the size of your need. This new version 2.1 of the hardcase has a list of minor changes as well as functional improvements and design was slightly changed to be easier to print all compared to the old version 1.0…
End caps for the MPCNC. To make the closed end caps for the frame aligned with the corners, the X and Y sliede-rails must be 4mm (2mm per cap) shorter each. Fits for 25x2mm tubes. Print instructions Print in PETG or ASA
This is a pretty straightforward design. It covers the end of your linear rail to both align it during installation and prevent the carriage block falling off accidentally. There are two files, they are identical with the exception of the…
An endcap for aluminium 2020 profile
Removed the magnet holes from the reduced height versions of the gridfinity collection for faster print times. I only edited the endcaps as those were the ones I needed. Also added two more endcaps (2x1 & 2x3). The models are very crude…
Give your loved ones a nice souvenir for Easter. You can easily print and quickly assemble the Easter Bunny with the cart. You can print them in different colors, as well as increase the size according to your desire. Happy Easter!
The Disk Centered Auto Rotation (DCAR) Muzzle Device for foam dart blasters. Similar to its bearing covered cousin (the BCAR) this muzzle device uses a rolling surface to minimize the FPS reduction while a dart gets twisted through the…
This endcap adds 1 inch to the end of a RepRack. Helps in situations were you may want to squeeze in one more spool. Also ascetically adds a nice finishing touch to the RepRack! Sizes included: 18mm (Standard/USA) 20mm (German) Buy me a…
After creating a replica from scratch for HPA there were some holes and unneeded things. So I fired up my CAD. I was in need of covers for the selector cap, charging handle and buffer tube. In addition the original dust cover is triped…
Enhanced LRM20 missiles Wolf head decal in cockpit Raised and lowered features. Cut the model in parts Added magnet holes for torso twist and arm rotation.
Based on various feedback, GridCase has been released in it's second iteration as GridSystem . I recommend the new version as it contains fewer non-printed parts, simpler parts gallery and offer better stability in larger builds. GridCase…
Three card MicroSD holder that fits nicely between the mounts for the JSAUX Modcase Steam Deck case. When the kickstand is installed, the holder is completely covered. In the pics above, I've just affixed it with some double-sided tape.…
Neck for the ModCaster Guitar/Clone Hero modular controller system! Designed to work for both Right and Left Handed Configurations! This neck will fit all guitar bodies I design and post on My Printables Page! The idea is that you can…
Description This customizer require 8 parameter. -Horizontal dimension (X direction) -Vertical dimension (Y direction) -The thickness of the tube -Length of the part inserted on the tube (minimum recommended is 15mm) -Thickness of the…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
Created another version that doesn't have the microsd card slots, for those like myself that don't frequently use them. https://www.printables.com/model/714416-cfecpress-type-b-and-sdcard-gridfinity-1x2
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Endcap for 30x60 mm aluminum extrusion.
Included are custom FPS end caps for the Adventure Force Nexus Pro; previously sold on Etsy and now shared for free. Details EDIT: Newer batches of Nexus Pros appear to be using a slightly different spring supplier, so we now recommend a…
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own. I've desinged a range of caps for various Ford vehicles. Tested on multiple models,…
Here is a 40 x 40 mm end cap for the Ender 3 Pro, being placed in place of the fixings of the original screen. I created it after purchasing a Creality touchscreen. It fits perfectly and does not move once in place. Rafts: No Supports: No…
Just a very easy to print endcap for 4040 V-slot extrusion beams. Anti-snag version: https://www.thingiverse.com/thing:4608507 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
Just my design for an old LG G5 phone mount for the top of an Asus ProArt 24" monitor so I can use it with Droidcam for video chat. Slightly loose fit, so I can add some rubber or cork for added grip. Print Settings Printer Brand:…
This (sightly overengineered) design allows you to mount (almost) any common smartphone on a vast variety of monitor frames. I use it primarily in conjunction with the android app Droidcam to use my smartphone as a webcam when I take part…
PicoGUS is a fantastic project to recreate the Gravis Ultrasound soundcard from the early 1990s for DOS PCs by Ian Scott. You can find out more info and how to build your own on author's Github: https://github.com/polpo/picogus Print the…
This actually ended up really useful, if grass seed wasn't so expensive I'd be using it all the time because it really works well! Long story short, I needed to spread some grass seed so I designed and 3D printed one (well mostly printed,…
This is a work in progress pmag for the ar10 series of rifles (airsoft) currently the way to secure the inner midcap mech is to slide it into the pmag shell and once aligned, it should be super glued in place, then slide the baseplate on…
A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…
I use a Logitech Mx Anywere 3 (Mac) for my Macbook and this wasn't an issue until i've been bringing my Macbook to work and dumping it on my Timbuk2 messenger bag. The mouse often gets squished and buttons pressed from movement of inside…
Update 1/8/2023 Someone asked for an option for 2 - V-slot 2060s side by side, so I added an option for 4060 & also a 4080 that will work for both 2x 2060 & 2x 2080. This openscad version is now Rev46 with 4 STL files for each option…
You need to print a hollow insert from the original model to use this It can fit: 3 full size sdcard 6 micro sdcard 8 usb the distance between each usb is 6mm i updated the model but didn't reprint from 4mm so if there is any issue, feel…
This case ist for shelly 2 modules. Up to two Wago-221-terminals can be mountet. For cables with outer diameter of 8mm, no additional strain relief required. For thinner cables zip-ties may be needed. To mount the top part, four M3x20mm…
A Deckmate compatible adapter for mounting Deckmate accessories onto the ModCase. Download the .STEP file to create your own accessory.
Just the 4 grams less headcap you'll need 3 m3x4x5 heatinsert nuts Print with supports, but not in the hexagon holes :P Added a V2 that is sturdier, v1 broke on me:P
My friend wanted nest for birds in cage and i couldn't find any what he wanted (only fancy stuff) so made a new based on what he has already. Also publishing Fusion file so please do better job :D 11.2.18 EDIT: added V2 with a cone shaped…
low profile shock tower redcat ascent
A medcase from Escape from Tarkov. For healing outside combat. Has a sliding lid for closing. Pulled it as an .obj from the game files, hollowed it out in F360, made a sliding lid mechanism. Will make some other cases soon. If you want…
Remix of CarGuy47's model to allow this cover to be added to endcap extrusion that has the snap in v-slot covers installed. Part of the interior was cut off to allow clearance for the v-slot covers. Print Settings Printer Brand: Creality…
I changed the original f3d file to increase the microSD slots and decrease the regular SD slots. White bin is SUNLU PLA+, lid is Overture Transparent PETG. 0.2/0.4mm layer/nozzle on X1C.
Hi there! I designed this desk organizer and wanted to share it. It has room to place a smaller print with your logo or name in the front and it has room for many microSD cards and SIMs. Most designs have few micro SD slots so I decided…
A VESA Mount Adapter for securing the Steam Deck to a VESA Mount. Download the .STEP file to create your own accessory.
This Model is only the body! It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page! At this time, some parts from…
Extended version of endcaps with covered back with M6, M5, M4 size
Summary Minimalist hardcase for your M5 Cardputer — designed to protect both the display and keyboard. A small opening on the bottom allows you to easily push the device out when needed. If you’d like to support my work, you can also…
Crazy end caps for a 20x20mm aluminum profile for Nut 5 & 6 mm If you want a special version, let me know. I will create it for you Different versions: Normal, closed With hole in the middle for cable feed through Cap half round Cap round…
I designed this simple Hardcase for my Softcase Zeee 3S 5200mAh LiPo Batteries because most tracks here require hardcase batteries and its safer anyway. The case consists of two parts, a body and a lid. The lid snaps in place with 3 tabs…
Use this STL to customize your own name plate for your Apache 4800
mine have been made out of overture black super pla+, working like a charm ever since.
My Jsaux modcase's stand became sad and loose, and I haven't even had it for a year, so I scoured Printables for the files I needed to combine, and voila! A replacement stand!
D20 dice jail perfect for a keyring Needs tree supports and almost solid infill THIS IS FOR PRIVATE USE ONLY If you wish to sell this item follow me on Patreon or Thangs3D
This file is prepared for a Formlabs printer and have been tested on a Form3B+ with Grey v4 resin printed exactly as oriented in the .form-file. The .zip-file contains a .form-file you can open in PreForm.
Suggested to me by Dave Rome of CyclingTips ( @romeandstuff on Instagram) when he noticed a similar tool in the CeramicSpeed hub bearing tool kit . The tool slips over press-fit end caps found on many hubs, especially those with 12 and…
Cap for the bosch rexroth 4040 profiles Printed on the Bambu X1C with 0.1mm tolerance
![NAS ITX PC Case with stackable expansions [MODCASE MASS]](https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg)
