Counting matching models…
These are printed and glued together to hold the Deputy Tokens for Black Orchestra. You can print them yourselves or order them from https://bghq.us Happy Gaming! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Includes: - Outlet Adapter 90 degree elbow to Rigid 2.5” Vacuum hose (16 Gal. 6.5-Peak HP NXT Wet/Dry Shop Vacuum) -Inlet straight adapter to 2.5" dust collection tubing with band clamp -2.5" dust collection tubing to 1.5" vacuum port…
This is a right angle fitting that attaches to the top of a Dust Deputy cyclone separator. This fitting makes it less likely to kink your vacuum hose. For standard 2 ½ inch vacuum hose. I printed it in one piece in PETG with supports. You…
Deputy Badge made for costume prop. Layer shift
Gunsmoke - Deputy Marshal Festus Haggen (Ken Curtis) - 1955-1975 3D printable model.
Customized version of https://www.thingiverse.com/thing:2015939 . This was designed to work as a reducer for the inlet of Oneida's 5" Super Dust Deputy. I designed this to fit internally to the opening to avoid having an internal step…
This is designed to fit the inflow port on the Harbor Freight 2HP dust collector blower with very little wiggle room - it needed to be tapped in. This dimension is 124.8mm or 4.91in. I've included a version which includes a mounting hole…
Ok, so I mocked up my stock, store-bought Harbor Freight 2HP dust collector, so I could plan for rearranging its parts to make my setup 2-stage instead of 1-stage. In these screen shots below, the plan for the new setup is on the left,…
Adaptors for Oneida Super Dust Deputy 5" to fit a 5" hose to connect to the Harbor Freight Dust collector inlet, or other applications that use 5" hose 2 Versions, they are basically the same but the larger is 6.5" tall and the smaller…
I printed stock settings in bambuslicer with .4 nozzle, at .2 layer height, using iiidmax pla+. The part of adapter that goes into festool inlet needs a layer of tape to act as a gasket, otherwise it will be loose. I figured a tape gasket…
The model was printed with Prusament PETG. I opted for a stronger wall to ensure that the adapter can withstand a fall without breaking. From daily experience, I can say that the part holds up without any problems.
When converting Harbor Frieght 2HP dust collector from 1-stage to 2-stage by adding a * Super Dust Deputy 4/5 , you can use this adatper part I designed to connect its "Y" to the Super Dust Deputy 4/5. The Harbor Frieght 2HP Dust…
Overbuilt vacuum hose adapters for the original Dust Deputy. Adapters include 1.75" OD and Cen-Tec quick-click. The adapter base includes a space for a 54mm ID / 3mm dia O-ring, but this is entirely overkill and unnecessary. But fun.…
Adaptors for either end of my Festool dust extractor hoses to a dust deputy cyclone. I printed with TPU but I think just about any material should work.
These adapters allow you to connect a standard size shop-vac hose or a 4" diameter hose to an Oneida super dust deputy. The shop-vac hose was tested with a RIDGID brand hose; should be a fairly standard size but haven't tried any other…
Model made in Autodesk Fusion and exported. I'm still not used to Autodesk so I added the circles at the end of the star points individually within the PrusaSlicer software. I added the eagle (colonel_rithm filename from Printables)…
This is an adaptor to attach a Shop Vac hose to a Dust Deputy. The hose I have is 1 and 7/8" outside diameter. The adaptor can be printed as shown in the STL file diagram. The bottom 30 mm attaches to the Dust Deputy as it has a small…
I needed a way to affix my super dust deputy directly to my harbor freight 2.5hp dust collector. I designed this off the 6 to 4 inch adapter that came with the cyclone and modeled this off exact dimensions measured and as I printed is an…
This model adapts the tapered inlet of the older, not 2.5, Oneida Dust Deputy to the slip end of a Cen-Tec shop-vac hose that is intended to go into a standard shop-vac. Both sides are just press fit onto the Dust Deputy and the end of…
Got a DustDeputy? Trying to use your (ancient) Craftsman vacuum and fat hose as the host for it? Hope this helps. I Had been trying to use the original inlet fitting on the body of the vacuum with hose clamps onto the dust deputy inlet,…
Why? If you want a screw top lid on your bucket for your Dust Deputy Cyclone instead of peeling off those annoying stock lids, you'll know why. Screw top lids are not flat, so you can't just cut a hole and bolt on a Dust Deputy. So I…
Oneida Air Systems Dust Deputy Cyclone Separator Repair Ring One of the things I did was to place my dust separator on top of a large drum using a wooden plug on top. This was great because it greatly increased the storage capacity of my…
I put together this idea to build a cyclone right on top of my Rigid vacuum base using Home Depot 2 gallon buckets. This is done instead of building a vacuum cart that seems a popular solution. I wanted to get away from having a separate…
Adaptor Kit to mount a Dust Deputy on top of a Fein Turbo Vacuum using 2 1/2" hose. Parts needed: Shop Vac brand 2 1/2" vacuum hose. Dust Deputy DIY 5 gallon or 3.5 gallon bucket with lid. Fein Turbo Vac. The 90degree and Arc connectors…
This flange I designed to fit the ID of 5inch flexible dust collector hose and attaches on the bottom outflow of the superdustdeputy where the material will be collected in your bin of choice. I printed this is Overture ASA orange with .2…
The bucket lid my dust deputy was installed on cracked after several years of usage. I decided to make a backing plate to try and reinforce the lid and a new gasket to replace the original foam piece.
I have a 3/4hp Dust Right dust collector from Rockler and the Oneida Super Dust Deputy. I previously plumbed the intake to my table saw, but wanted an aux connection for a hose I can use more flexibly with other tools. The Dust Right came…
Dust Deputy 5in Hose Adapter Made to fit the super dust deputy for use with 5" hose as it only comes with a 4" adapter from the integral 6"
Dust Deputy Bleed air 5in Hose Adapter for bag pressure equalization hose.
These 3 parts allow you to create a dust collection system form my Shapeoko CNC using: Dust Deputy Low Profile Dust Separator Vacmaster VWM510 5-Gallon 5 vacuum Sweepy 2.0 Dust Boot Standard 5 gallon bucket Shop stool (attached the bucket…
Why? If you want a screw top lid on your bucket for your Dust Deputy Cyclone instead of peeling off those annoying stock lids, you'll know why. Screw top lids are not flat, so you can't just cut a hole and bolt on a Dust Deputy. So I…
Dust Deputy 5in Hose Adapter Made to fit the super dust deputy for use with 5" hose as it only comes with a 4" adapter from the integral 6"
Dust Deputy Bleed air 5in Hose Adapter for bag pressure equalization hose.
Adaptor Kit to mount a Dust Deputy on top of a Fein Turbo Vacuum using 2 1/2" hose. Parts needed: Shop Vac brand 2 1/2" vacuum hose. Dust Deputy DIY 5 gallon or 3.5 gallon bucket with lid. Fein Turbo Vac. The 90degree and Arc connectors…
A tribute lightbox featuring the VCSO Motor Deputy emblem. A simple yet meaningful piece celebrating those who serve on two wheels. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome…
This is a coupler/adapter/whatever so that I could connect my new wall mount DeWalt DXV06G vacuum to my existing Oneida Dust Deputy separator. Originally the Dust Deputy was just for my wood working endeavors but I found that it works for…
Gunsmoke - Deputy Marshal Festus Haggen (Ken Curtis) - 1955-1975 3D printable model.
