Counting matching models…
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
You don't need any supports or edges. All you have to do is glue the head and fin and the outer parts together. Filling: 15% Expansion: 2 If you want to support me, join my Patreon. https://www.patreon.com/Flexi__Maker Do not publish,…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
Dimensions (LxWxH) 100 x 63 x 51 mm (100% scale) Basic information Looking for a cute and friendly fish companion? Look no further! This Goldfish doesn't have to be fed, nor cared for, and anyone will instantly fall in love with it's cute…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Gridfinity - Metric Screw Labeled Bins (M2.5, M3, M4, M5...plus you can mod for others) Bins used for storing small metric screws (M2.5,M3,M4 and M5). If you need other sizes you can simply use prusa slicer to change embossed text based…
Print approx. €17.38–€21.25 excl. taxPreliminary estimate for PETGSource material: PET
Screws labels with pictures of DIN912 screws
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This Prusament Goldfish remix was hand-painted and prepared for both the 4T and 8T versions of the Prusa CORE One+ INDX. Its patterns ressemble a goldfish you can find in an aquarium. Filament used for printing the presented models: The…
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
Includes holes for magnets that do not need supports. I printed this in PLA with a 0.6mm nozzle and 0.35mm layer height, which takes 2 hours, and looked great. Supports are optional for the large circle but having them led to a better…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Print approx. €5.10–€6.24 excl. taxPreliminary estimate for one variant
The Gridfinity Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use…
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
original project I was looking for a Gridfinity nozzle holder. but all available didn’t suit my needs so I made my own the 1x1x3 variant is stackable with the nozzles inside available in 1x1x1 1x1x2 1x1x3 variants print how you like it :)…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Print approx. €4.81–€5.88 excl. taxPreliminary estimate for one variant
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Print approx. €8.72–€10.66 excl. taxPreliminary estimate for one variant
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Gridfinity Tape measure holder
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray. You can operate the magnet server with one hand. There are interior compartments, but if you…
Goldfish FB: https://www.facebook.com/3DPPark/ Print Settings Printer: Creality 3D CR-7 Rafts: No Supports: Yes Category: Fashion
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
In the absence of a phone holder that is simple, spends little material and gets the job done, I made this one. Works well to samsung S20 FE (with or without cover). Interested in Gridfinity?
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Contains files for: - Single Zippo - Dual Zippos - Single Bic - Zippo and Bic Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
This is a basic usb stick storage module using the Gridfinity plugin for Fusion360. The .f3d file includes the parameters used for the width, depth and thickness of the tongue on the usb sticks I was using. I later saw…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity nozzle holder with labels for 0.4 0.6 0.8 and 1.0 mm nozzles. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 0.16 Infill: 15 Filament: eSun Pla + White
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…
Based on the Fusion 360 plugin, this 3x2 module holds a set of small Trojen metric Allen keys ranging from1.5mm to 6mm. The bin has no stackable lip and the size labels are raised so a colour change makes them easier to read.
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for one variant
Gridfinity bin to fit 10 mini files horizontally to fit into a drawer. Bin size is a 4x2 grid. The tolerances are tight to fit this many files in. So, it has an angled area at the bottom to press down on the handle to pop up the file.…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
Take your Gridfinity to new heights with Gridfinity Legs! Legs for your Gridfinity Bases. Have screw holes on top and bottom so that Gridfinity Baseplates can be securely mounted to them. Bottom of legs fit into GridFinity Bases, so you…
Print approx. €12.78–€15.62 excl. taxPreliminary estimate for one variant
quick access to scalpel and other tools
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Socket set for 1/4" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
Honestly this remix of this design is way better than mine original. https://www.printables.com/model/659216-gridfinity-tweezer-box-angled-entry Rest your tweezers with style. Gridfinity Yeah, by Zack Freedman - gridfinity.xyz. Box has…
This is a 3x4 holder designed for spade bits. It supports imperial (inches) 1-1/2, 1, 7/8, 13/16, 3/4, 5/8, 1/2, 3/8. There is an extra 1 inch slot, for all those folks that have an extra spade bit, but don't know where it came from.
Print approx. €12.66–€15.48 excl. taxPreliminary estimate for one variant
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a 2x4 Gridfinity bin designed to hold 140mm tall Field Notes notebooks. A single bin can hold 12-16 notebooks depending on how tightly you want to pack them. Once filled with Field Notes notebooks, the overall height is roughly…
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Hex bit holder, gridfinity 1x2 bin. There are four deeper slots for those longer bits. Print with 10% gyroid/grid infill and no support (slicer might suggest to fix an error in the .stl if so then do that). It fits the Gridfinity…
Made with my parametric gridfinity box . I've seen these in the wild. But I was not sure about clearences and they seemed to be higher on sides than on top, which makes inserting swatches pain. By elevating the middle, you have no problem…
hello everyone, I am new to 3d printing when I was browsing through the files I discovered gridfinity organizing system and decided to organize my toolbox. I have looked at models uploaded here for inspiration but decided to make my own…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely. Attached is a hand crafted…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
Socket extension holder/plate for quarter inch ratchet extensions. Gridfinity 1x4 size.
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Get your pliers in order with this Gridfinity 2x2 for your pliers. It holds 4 pliers and is simple to print. This is just one of my contributions to the Gridfinity ecosystem. Now with two types. Hex and Circle patterns. As always a great…
Print approx. €7.10–€8.67 excl. taxPreliminary estimate for one variant
*Updated part with better fit to gridfinity baseplate and 51 bits
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Print approx. €10.14–€12.39 excl. taxPreliminary estimate for one variant
This is a 1x2 Gridfinity bin that holds the Wiha 40010 Magnetizer Demagnetizer. It is standing to keep on the desk and ready to use. It only takes up 2 grid units. If you are not using the Wiha 40010, this model will fit another…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
This 1x1 Gridfinity module holds a Swiss Army knife vertically to minimize its footprint. The square inside is 22mm which is wide enough for regular and narrow knives. Prints easily without supports. Based on the Gridfinity System from…
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Socket holder 1-1/4 to 25/32 sae The socket holder uses a gridfinity 2x5 bin. It's made for sae sockets 1-¼, 1-3/16, 1-1/8, 1-1/16, 1", 15/16, 7/8, 13/16 and 25/32 (Biltema). Used with 1/2" drive ratchet. Print “standing” with 10%…
Print approx. €8.36–€10.22 excl. taxPreliminary estimate for one variant
Gridfinity 2x2 holder for 76mm square sticky notes. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 0.24 Infill: 15 Filament: eSun Pla + White
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Will continue to add to this collection as I work on it
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. It is based on this model: https://www.printables.com/model/503777-caliper-stand @spikeon requested this 1x3 version so the head end…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
Designed to fit the drawers for this Husky Work Table . I believe the 72in version of this work table has the same sized drawers so it should also fit. You'll need to print: 1x Corner Top Left (1) 1x Corner Top Right (2) 1x Corner Bottom…
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
You've already invested in a Gridfinity organization system and need to store thread or bobbins. This is the solution for you! I have included models for staking 1 - 3 spools on top of each other as well as a model that will fit 4 smaller…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
9 holes with spaces between which can be used for thick handled items and paintbrushes. I needed a paintbrush holder and the original version of this was too tall for me. So I tweaked it.
I remixed this part to allow the snipper to attach on both sides, added 2 USB holder slots and a superglue holder slot. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 0.16 Infill: 10…
Print approx. €10.17–€12.43 excl. taxPreliminary estimate for one variant
Perfect desk drawer storage for the Pentel Graphgear 1000 mechanical pencils. Non-Stackable pencil tray, 2 gridfinity units high plus 6mm of pencil above lip. Custom cut out shape to cradle the Graphgear 1000 with a 3 degree tilt for easy…
