3,167 models
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
There are plenty of drain snake STLs out there, but this one has bite. The design allows larger teeth while keeping the snake small enough to slip into drains. Prints in less than 30 minutes and works well at 0.20mm layer height. Fun…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Use tree supports on build plate only + 3 walls, 5 bottom layers. The Washing Machine Drain Tray is a low-profile container designed to catch water when draining or cleaning your washing machine filter. With a height of only 25 mm , the…
Print approx. €9.26–€11.32 excl. taxPreliminary estimate for one variant
A simple and effective drain cleaning tool for sinks, washbasins, showers, and similar drains. The flexible, barbed shape easily catches hair and other debris from places that are otherwise hard to reach, helping to clear partial clogs…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
The original design by Ron was great, but there were a few minor issues/additions I incorporated into this remix: 1) re-oriented part for proper print orientation 2) netfabbed the many mesh errors away 3) removed the bottom 0.1mm which…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Simple yet effective show drain cover to catch hairs from getting stuck down the drain. You can easily clean it after showering preventing nasty unclogging rituals. Based on previous experience it will hold up for over 5 years even when…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…
Print approx. €11.73–€14.33 excl. taxPreliminary estimate for one variant
Great pot for succulents or live plants with drainage down to bottom tray. Prints with no support. Scale to any size.
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
This model is a mesh that can be cut to any shape and is easy to print and can be used for practically anything. I intend this to be used for terrariums as a drainage layer. Print Requirements Layer height has to be 0.2mm No supports No…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
UPDATE 01.03.2022: Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt. Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität. Alternatively, for…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Remake of sink drain sieve
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Swirl pattern holder for two manual or electric toothbrushes and toothpaste - up to 28mm (1.1") toothbrush shaft diameter. Update December 22, 2024: Added Toothpaste Tube Insert to allow neat storage of your toothpaste with the cap up !…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
My reccomended print settings: PLA or PETG 4 perimeters 7 top solid layers basic support needed (look at the picture) Suggestion: glue a self-adhesive rubber pads on the bottom
Print approx. €16.49–€20.16 excl. taxPreliminary estimate for PETGSource material: PET
Washing machine drain hose adapter to DIN 32, DIN 40, DIN 50, DIN 75 or DIN 110 standard sewage pipe. This rigid adapter allows you to connect a standard washing machine drain hose to a DIN32/40/50/75/110-compliant drain pipe, which are…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Print approx. €17.71–€21.65 excl. taxPreliminary estimate for PETGSource material: PET
I created these Plant Pot Spacer Rings to tackle a common problem: stagnant moisture building up at the roots of plants in flower pots. After noticing some of my favourite houseplants struggling with soggy soil, I designed these rings to…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Adapter for emptying the water drain fast without spilling water unter the mashine. Out it on the drain, then open the drain carefully. Ideally, place a bowl at the end ot the tube and remove the lid. To empty it without removing the lid…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Introducing the 3D-printable Berry and Fruit Washer with Drainer , a two-part kitchen essential designed to simplify your fruit washing routine . The innovative design includes a base where water collects and an upper compartment with…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
My rain barrel I paid for (dumb move by the way… got a massive cistern for $30 that was used for soap that works a billion times better) had a ½" NPT connection on the top and bottom. Not sure why they'd do that, since so few of anything…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
A CPAP mount that fits in tight space between a bed and other furniture/wall. Designed model provides a mounting plate on which an AirSense 10 CPAP unit can securely rest while retaining access to the removable side water reservoir. The…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
Self-Draining Sponge Holder | Wave Drip Tray - Remix raised by 6mm - Size: Large (115x85mm)
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant
I was sick of having cutlery soaking in water so I made this riser. It's meant to work with ORDNING Stainless Steel Cutlery Stand and the EKIPERA plate. It prevents drying cutlery to come into contact with excess drain water. Edit feb…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
It's a replacement part for a lot of sink models here in germany. Where sometimes the oem plastic part of the drain puller breaks. Use the original screw and square bracket. Source of the image I used in the pictures for clarification…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Say goodbye (for good) to soggy, slow-drying sponges. This upgraded drip tray builds on the original wave design by combining a sloped drainage plane with raised airflow studs , maximizing both water runoff and air circulation. What’s New…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
This modular organizer is designed to hold items like dish brushes, sponges, and other household essentials. Each 8×8 cm compartment can be configured with different container sizes (1/3, 1/6, 1/12 of the base) and heights (5, 10, or 15…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for PETGSource material: PET
ENGLISH Bathroom organizer/shelf for shower gel, razor, soap, washcloth, hairbrush and much more. The sloping base plate allows the water to drain to the front. Water no longer accumulates under objects that are on an elevation. It stays…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for PETGSource material: PET
A theme in my models is the absurd amount of support material. If anyone knows a good angle for supports please leave a comment.
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
We have been annoyed for quite some time by the absurd amount of noise emanating from our shower drain. The noise is enough to wake a person, even with the bathroom door closed. The noise is magnified by the tile floors and walls of the…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Die Teile mit einem x im Dateinamen müssen so oft gedruckt werden, wie die Ziffer hinter dem x angibt.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Holder for 27mm hose. Made for my AEG L9WEF80690 washer-dryer, which has a drain hose with a (at least for me) unusual diameter of ~27mm. Printed from PETG flat on bed with supports.
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for PETGSource material: PET
Looks nice and is easy to print in your favorit color... Print upright using small layer hight, brim and tree supports as shown on one of my pics. Hope you enjoy.
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Combined 2 designs in one. Used this one also https://www.printables.com/model/879721-bog-planter-with-moat
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
See this post : My next approach to handling the soap bar problem: a floating soap dish with a perforated bottom so drying and draining from below can happen. My journey so far: 1. standard soap dish. It's a slurry mess. 2. fancy soap…
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
Works in PETG but better in PA or TPU 95A
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder so that a rinsed washing-up foam-back-scourer is suspended without base contact and can dry/drain and maintain better hygienic conditions between uses. Will fit any sink edge to the waste/draining pot which is a standard…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Versatile drain cleaning tool available in three lengths—15cm, 20cm, and 25cm—designed to effectively unclog and remove hair and stubborn debris from (drain) pipes. Works with most filament types, provided they aren’t overly flexible or…
This was inspired by the original Laundry Detergent Cup Drain and modeled from scratch in Fusion 360. As is, it fits the new Tide bottle, but the model is fully parametric and therefore can be adjusted to fit other detergent brands. It…
Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…
Nothing special, another barbed drain cleaner i designed one day i needed one and didn't want to use one from the internet Should be able to be scaled in slicer in case you need it longer, thicker/thinner or wider I recommend printing it…
Soap bar holder that drains on its own
This bucket is designed to catch dirty water when cleaning the pump filter of LG washing machines. It was specifically developed for the LG F14WD96TH2, but will likely fit other LG models with a similar pump filter position and height.…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
Update: I have now uploaded slightly improved versions of the planter and tray models. The tray should now have a snug fit with the planter, keeping it from sliding around and getting off-center. The pictured print was done in matte gray…
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Aspire Planter: The Aspire Planter is the perfect size for small to medium sized houseplants, succulents, or cacti. The planter features built-in drainage holes and a drip tray that is perfectly contoured to the bottom of the planter,…
Thanks to MrTheKod for the re-remix! The original re-remix file had some internal geometry issues and needed to be repaired before it could be printable. I made some changes to make it print more easily, faster, and with less material and…
A soap/sponge tray which allow for airflow and fast drying.
Fits 70mm drains, allows for good flow even when partially blocked. Should be printed with heat resistant filaments if its going to be exposed to boiling water, I found that PETG and ASA will warp, while PC is able to resist warping with…
I just made a very slight modification to an already fantastic design by davwilso. The new cup that Tide supplies has a larger diameter so it no longer fit in the original design. I I just added a wider lip at the top to contain the new…
This drain snake was created to have extra long barbs to help grab all that stubborn hair that can get caught in the drain. PLEASE NOTE: you need to have a drain opening that is greater than 4x12mm in order for this snake to fit in your…
With everyone staying at home your drains might be getting clogged more quickly. You can't call anyone to take care of it and you can't go out to buy a drain cleaning tool or chemicals, so why not print your own!? This 8.5" drain snake…
Update: v3 Release All three parts of the planter have been updated for this release. The main change is to the drainage pot. Now, the interior overhang is much less steep, enabling printing without supports ! The bottom interior surface…
"There are so many spiral cups and planters on this website, why would you design another one?" Well… first of all, hello. I am glad you asked. Like, I am sure, so many other designers, I frequently see models online and think “I like…
This design stores the laundry detergent cup for Tide and Gain brand liquid laundry detergent containers and drains excess leftover soap back into the container. Single print design (Print in Place) Fits North American Tide and Gain 4.43L…
A collection of kitchen and bathroom drain strainers, stoppers, and drain pads. Useful for kitchen sinks, bathroom sinks, utility sinks, bathtubs, and probably more! Before printing, please review the list of models and their respective…
Practical sponge box with a drainage groove to keep your sponge dry and hygienic. Compact design saves space at the sink and fits any kitchen.
A small sponge drain rack, sutable for two sponges and two mini brushes. Supports are required when printing
I designed and 3D printed this minimalist soap dish to solve a common problem — soggy soap! It features a built-in drain channel that allows water to run off easily, keeping your soap dry and lasting longer. The open design promotes…
Maceta cuadrada para plantas pequeñas, con drenaje de agua incluido. Especificaciones: Las macetas tienen 50mm de altura. El grosor de las paredes de la macetas son 2mm. los agujeros de drenaje de agua son de 4mm de diámetro con el…
Summary Drain spout sized to 65 mm that fits a Samsung washing machine (my model number: WW70K44205W/EG). The Reason to Publish I searched across all major platforms and found various models that could work for my washing machine, but all…
Default size is checked and tested. It's safe if you want to print size bigger, but smaller please check the wall thickness before printing. Instruction video:
Remix of glsf91 model https://www.printables.com/model/138644-solar-panel-water-draining-clip-for-flat-roof This model fits 35-40 mm panels, 8 to 12 mm lip. Measure if this fits. Should fit DEMGC 485, 490, 495 W monocrystalline panels.…
Resin vat drainer for anycubic photon mono Summary Resin vat drainer Print Settings Printer: Voron 2.4 Rafts: No Supports: No Filament brand: PolyMaker Filament color: Black Filament material: PETG Notes: Resin vat drainer
Chikorita pot, in two versions: with or without drainage hole. Modified to be a flower pot from a model downloaded from the internet. Macetero de Chikorita, en dos versiones: con o sin agujero de drenaje. Modificado para ser macetero a…
My old drain hose holder that came with my washer was too narrow to actually hang on my sink. I designed this one to fit a countertop/sink combo that's up to 90mm wide. This can accommodate a 30mm hose, so it's wide enough to fit a common…
Give your bathroom sink a clean and modern look with this practical soap dish for standard soap bars. The raised radial ribs keep the soap above collected water and allow air to circulate underneath, helping the soap dry more quickly…
Solar module drain clip for 30mm panels. Wonderfull in flat roofs (<30º) It drains the panel completely avoiding accumulation of dust. Insert it in the lowest panel side. Solar module drain clip for 30mm panels Tested with AE Solar panels…
This is an MMU painted version of patrickart's bulbasaur model with a hole carved out in the back so that it can be used as a plant potter. I carved a tube through its butt as a drainage hole so that it's a proper pot. Very anatomically…
A versatile sink drain strainer designed for sinks with an Ø82, Ø86, or now Ø90mm diameter, featuring an integrated plug. The press-fit design accommodates a drain plug stem that fits most modern drains (Ø8mm) and includes a gasket for a…
Creator:muskokaresearch https://www.thingiverse.com/thing:5352444
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
ENG: This pot can be used both as a self watering pot and as a classic pot with draining holes but with a modern design cover pot, since the bottom of the internal pot doesn't touch the one of the cover and allows the water to drain,…
Should fit into a drain of around 50mm in diameter. The print is split into 2 parts in order to print cleanly without supports. I experimented with snap fit design, it takes some fiddling to put the two pieces together but it works better…
Fed up with getting the mop out every time you clean the washing machine filter? I designed and 3D-printed a small, cust. It is made in PLA in two interlocking parts. Samsung Eco Bubble WF70F5E0W4W
My sister asked me to make her a soap holder like the one by Kitsch but with two slots instead of three like their product, and seeing as it was a pretty simple form, I threw this model together and printed it for her. Turned out quite…
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
UPDATED 11th March 2020: Added straight-through Y pattern, optional flow arrows. Having a european-built caravan in Australia, I found it very difficult to get the 28mm diameter sink and drain pipe plumbing these are fitted with. I tried…
Designed to print on its back without supports. 2026-09-21 : Added model with inside width 216,6, (first model have 146,6)
A flexible Sink Caddy for your indoor or outdoor sink. Dimensions (with lower cup): L:180mm; W:92mm; H:135mm Features Store your soap; sponges and brushes in a flexible configuration. Divider allows for 1/2 split or 1/3-2/3 split. More if…
Wall mounted planter - with insert drainer. Easy to take it out and water the plant. Note: it is easier to print the insert with tree supports. i might update it so u dont have to do that.
Sink drain strainer that fits a typical bathroom sink
Complete redesign and simplification of a thingiverse model to catch hair and other particulates from getting caught in your drain. Size to your specifications, smaller radius end goes into the drain and should form a snug fit. The larger…
Some people have asked me for a drain version. I have added two versions. With and without drain holes. I suggest you use rubber feet like these for the one with drain holes. So, it has some elevation to drain out the bottom. AUSTOR 318…
A straightforward remix of @TripleGWorkshop 's Droplet Hanging Bird House. I liked it the best of its kind: It's a nice shape that prints easily, has a good-sized front opening and built-in break-away support for the landing perch. What I…
Keep your kitchen sink neat and organized with this sponge and cloth holder . Designed to improve drying and hygiene, it keeps cleaning items elevated, allowing better airflow and faster drying. Ideal for use next to the sink, this holder…
This adapter allows you to connect a standard US garden hose (GHT, FHT) to an Intex above ground pool drain. Onshape source model: Intex Drain Connector Print Settings Notes: There is quite a bit of overhang in this model's threads (up to…
This is the Eight Sleep drain tool model, cut in 2 parts and slightly modified to be more 3d printer friendly.
