443 models
Hyper-K Micro Machine The Kei Drift Truck. Inspired by Japanese Kei cars. This is my own desing created from scratch. This model has steering wheels for drift action. Consists of 20 parts , Designed for easy printing without supports. I…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
This is a hanging drift clip for 1/10 RC drift tracks. Prints in 4 parts. 1 upright - prints flat on the back with the feet pointing up. No supports needed. 1 crossbeam - prints on the side. Supports required under each interlocking…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
License plates for RC 1/10 drift car, attach with double sided tape. Printed in 0.1 layers. Add color change in prusa slicer on the last layers to get multi colored print.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
This is a drift wheel that I made for my WLToys 144001. I wanted to be able to drift around on carpet or concrete and these wheels make it happen. They should fit any RC car or truck with a 12mm hex coupler and a 3mm shaft. NOTE: I have…
Print approx. €10.77–€13.16 excl. taxPreliminary estimate for one variant
Drift tires for all 1/10 RC cars with a nut width of 12mm. I recommend printing with support structures everywhere. I used PLA for the print, to increase the life I recommend PETG. In order to save material, the infill can be reduced. I…
Print approx. €11.71–€14.31 excl. taxPreliminary estimate for one variant
Uploading...
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
DriftScoop – Paws Edition Part of the Drift Series Scoop. Clip. Go. The DriftScoop – Paws Edition brings pet personality to the rugged utility of the original DriftScoop. With the same travel-ready design and volume-tested functionality,…
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
drift · planter modern minimalist planter design with pattern that sits elevated on wrap-around plate full dimensions in mm ~ x: 130 · y: 130 · z: 100 photos show printed in wood pla .40mm nozzle .20 layer height 10% cubic infill fuzzy…
I wanted a GREAT looking drift track for my home…but didn't want to pay the crazy prices. I decided I was going to create this curb model in different diameters so I could piece together a track however I wanted! Available in 3ft, 5ft,…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
drift · lamp modern minimalist table lamp, designed with a modular assembly approach for both style and functionality Assembly is simple and intuitive: Thread the power cable through the lamp body, allowing the plug to exit from the…
Initially, I designed this wheel for on-road drifting. I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier. The front wheels are slightly narrower to provide enough steering…
I wanted to make a version of the little car dashboard drifter that I could use any hot wheels or similar cars on. It could probably be adjusted and tuned a bit more but I thought I would share it in case anyone else wanted to print one.…
READ THIS - NEW VERSION IN DRIVE TESTING PHASE! Model coming soon! - Model works as of now, you can assemble and drive it around on areas with no rocks etc(something like carpet indoor or hardwood flooring). Driving on asphalt or concrete…
A new version is available! Here it is! This is a 1:10 scale drift wheel with a 12mm hex. Print the wheel and tire separately. The wheel and tire fit together with two notches. add a thin bead of Super Glue in between the wheel and tire…
Hi Rodnie, Yes I do have this model kindly provided by Pyropete03 over at the Diviant Art site. https://www.deviantart.com/pyropete03/art/Fortnite-Drift-Kitsune-Mask-755448980 As always check the sizing suits your needs and if you do…
This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…
A Nissan 180sx edited to fit a V16 open z chassis. It is not a original model, instead a drift modified car. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
People of the Drift Club asked me if i can Print some Rolecage stuff that fits in every Car. I tried my best to fit what they want. its just for the look, hope you like it :) The Sidebar you have to Mirror for the other side. Added some…
Wheel model for RC drifting.
This project has wasted 20+ hours of my life. So please enjoy it and fix any issues you come across. Also feel free to improve and modify this design however. (Side note, this kit gives the exact same angle or a couple degrees more than…
IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…
A detailed 3D replica of the RAYS TE37 SEGA – inspired by iconic real-life car wheels, reimagined as a keychain or compact desk decoration . Perfect for car lovers, JDM fans, tuners, or anyone who appreciates automotive style in miniature…
Drift Car Fidget – Desk Toy A fun little fidget toy that actually drifts . This drift car has a common 608 skateboard/scooter bearing mounted in the nose, letting it slide, spin, and drift around your desk and any obstacles in its way.…
1/10 scale aerowolf inspired lip kit for 240sx. measurements taken from addiction rc d-max 180sx lexan body.
Hi, It's my air funnel for 30mm and 25mm fan.
Here are available side mirrors for RC drift cars. The mirrors are in 1:10 scale. I always had a problem with mounting the mirrors, so I fitted them with a thread and a nut. The mirrors follow a design direction towards Japanese drift…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with grips so these…
For the most up-to-date parts, visit the GitHub project page . A 3D-printed, 4WD RC drift car. 1:28 scale, fits 90mm (M) wheelbase MINI-Z shells. Test drive: https://youtu.be/90DoZpYbfy4 U-joint closeup: https://youtu.be/g_EzM2HMQvg Note:…
Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…
This is an organizer for the boardgame Xia - Legends of a Drift System and the expansions Embers of a Forsaken Star, Missions & Powers, Sellsword MkII. It supports sleeved cards (I use Docsmagic Perfect Fit) and vertical storage. This is…
These Barriers are perfect for a Sturmkind drift track. I printed the parts from PLA and they work perfectly. The Barriers are ideal for limiting the track on a Rollrennstrecke drift course
This is a remix of the Quadrifilar Helix Antenna by @ jhsandell for 1090MHz (ADS-B) The following updates have been made: The 'bug' that jhsandell noted where the code was using diameters rather than radii has been fixed This version…
Skydrifters! Two unique poses are provided. Both are integrated with their bases and are intended to be printed in one piece. I had good success printing the flying version with the base attached to the build plate and using mostly…
1/10 scale shotgun style drift exhaust. sized for addiction rc d-max 180sx.
A drift barrier for RC drift cars designed to navigate sharper corners.
hello . i created a bash bar , rear bumper for drift rc models
Lets KILL all tyres with this little beast!! Fun and easy print. Enjoy! Juri
This creation makes it possible to drifter your favorite hotwheels car at the same time as you take turns. To realize the assembly you will need a chc screw M4x12 mm as well as a roller or scooter bearing. First assemble the car support…
Bring your car to life with this incredible dashboard mount! Designed especially for drift enthusiasts, this accessory allows you to display your cars in a dynamic way, simulating the drift effect. Recomended print settings: Layer Height:…
Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…
design to prevent joy stick from being crushed when traveling or placed into a pack.
1:10 Scale Wheel for RC Drift Cars Printed in ASA material, ideal for strength and weight (one wheel weighs approximately 11.7g). Designed for Tire Mounting Tape. Fits perfectly, tested with Yokomo tires. Offset: 6mm Hex: 12mm
Quick and easy to print. Flip the model upside down to print without supports. I printed it with 10% with zero issues.
Easy to print drift tire for a 1/10 RC car. PETG is perfect for this kind of application. PLA works too, but I wouldnt recommend it. Those tires drift well and are quite durable. Removing the supports (I would recommend tree-support) can…
These punches are used to drive new shift detent pin bushings to the correct depth in the ZF5 transmission case. These are BMW special tools 232360, 234022, 234023, 234021, and 233110 These punches are based on the drawings from the…
1:10 RC Drift Track curb. 950mm diameter. Two options, the one with a hole saves around 14% filament per section.
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
All Arrma Grom tires can be printed with supports only on the build plate. Drift tires printed in PLA will be the most slippery. Print the road tires in TPU for better traction, though they remain quite slippery. Pin tires can be printed…
Just a simple part to help keep your motor cool. Please print in the default orientation with supports. I have included a cut pattern you can print on your 2d printer to help with cutting the hole in your car body. Please make sure that…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
These are Drifting the WPL D12 very well, bone stock! Even better when upgraded Remix of a 1:10 scale RC Drift Rim (Source file/Author unknown; will 100% credit when I find it, Thingiverse) Remix of Gadoga "Tamiya M Chassis Drift Tire…
Drift wheel and tire combined, 65mm diameter, 12mm hex. The shaft hole is 4mm, but its easy to add a negative cylinder, center the wheel and a cylinder of the desired diameter. keep in mind to do ad 0.1mm for tolerances. I created it for…
can be printed together or separately in other colours can be printed without support card contains BMW keychain the BMW E30 is very realistic Print in place kit card , Assembly required
Simple single part RC drift tire. This is the updated version to add spokes. I also added a STEP file for easy editing.
Wheel model for RC drifting.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Rims can be printed in PLA, tires are printed in PETG. Can be glued together
Hello There! This RC Drift Boat (Airboat) is a model designed with a goal of being a flat-bottomed Airboat with the ability to pull off quick 90-degree horizontal skipping on the water. Tested version 1 of the RC Drift Boat is currently…
NOW INCLUDES STL MODELS TO IMPORT INTO YOUR PROJECT Import your 3D printable files into this project and create your own body kits for your Jiabaile 1:43 Scale AWD Drift Car Here is a link to the product to make sure it's correct Sorry in…
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model. You will also need 12mmx3mm magnets, and some 1.5mmx15mm screws to attach it. It is designed for the screw to go through the factory…
A piece of wood for your creativity. Chop it, hack it, mix it.
I tried ESylin's drift wheel ( https://www.thingiverse.com/thing:1334558 ) and they worked great, just wanted some that are a closer diameter to the stock tires so I drew these up. This design is for use with 12mm hexes, which the Slash…
A set of drift wheels for the WLToys K989 rc car. There is a right and left wheel so that the angle of the spokes look the same. But there is no problem with putting them on either side of the car. I have printed these wheels in both PLA…
Click Here for a link to the item this is designed for so you can compare The one and only hippie van is now available for your Jiabaile 1:43 RC car! I started designing this because I wanted a body that can house bigger batteries. In the…
Remix of https://www.thingiverse.com/thing:5128517 to allow printing TPU tyres on PLA rims. Also includes a 54mm diameter tyre to keep the same size as the original wheels. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 2S…
There are many videos that show off some product like this. I really liked it and wanted to 3D print it. @ @ropesgames_2613013 ‘s design wasn’t quite what I wanted because car looked like standing still so I added elevation with a rod.…
https://youtu.be/-B3mI3eYeAA if you like it, please consider to subscribe my youtube channel List of parts: 3D printed parts Drill motor ESC 30Amp Servo MG995 Tower Pro Battery 3S Remote Control and receiver OnOff switch Zip Ties XL…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
I added corrugations, hence the model can be printed hollow with only 11g of filament. Printing Instructions: 2 walls 0.28 layer height 15% lightning infill No supports Use 6 bottom layers for TACK versions! 2025-12-26 Added a SHORT…
Update 2: after some track time using the drift tires, I would change the spokes to be on the inside of the rim or in the sidewall as of now they take significant amount the tread. And maybe add some heat set threaded inserts for the rims…
This is a ragdoll like Orion drift figure
A tire press to help remove mounted RC drift car tires from the rims... Print in PLA or PETG with 0.2mm layers, a wall thickness of 1.35mm (3 walls), and a top/bottom depth of 1mm (5 layers). Sturdy enough to be used with a clamp for…
Traffic Cones for Car Drifters or Anything
This slips over the tires on a Traxxas Slash for drifting.
Drift wheels and tire combined, its a very simple design, not made for looks, but to be functional, balanced and easy to print. Dimensions: Wheel+tire diameter - 70mm - smaller than the standard 80mm, for better throttle control and lower…
🌀 Driftlight Tower Cottage – A Whimsical Lighthouse Retreat Set sail for imagination with the Driftlight Tower Cottage – a magical blend of lighthouse lore and cozy fairytale charm! Few supports are needed. I used organic-style supports,…
Aération capot carrosserie 1:10 rc drift ( 90, 95 et 100 mm) Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Prusament PLA Black Category: 3D Printing
Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars. Motor shaft 3.2mm spur gear shaft 4mmx27mm I created this, because it's impossible to find pulley with 19 tooth. I found 20 tooth pulley only,…
Rather than printing a whole new set of wheels, these sleeves fit snugly over the stock tires and turn your Typhon Grom into a drifting machine. They're 3mm thick and last a very long time. I recommend printing in PLA or PETG. I used 4…
Badge/Keychain with Alfa Romeo quatrefoil logo. You can print two color background with “two color” models.
Basic, small plaques with 3D raised text I used for my Jada FNF diecast collection. If printing at 0.2mm layer height, you can do a filament change at layer 16.
General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995718 or 999 5718), but it is hard to get and if you can get it, it's…
This is a simple, adjustable clipping point designed to provide clear feedback during RC drift practice. It features a sturdy, bolt-down base and a reinforced arm that holds a free-swinging marker, allowing for contact without disrupting…
a tool to help remove mini-z drift tires from the rims Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 18 Category: Toy & Game Accessories
No specific print setting is required, print with PLA material for better drifting and with TPU for better grip. it feet with bmw body version of jaibaile rc 1/43 rc car.
Resolution: 0.16mm infill (%): 20 Support: Yes
My friend lost his ZOHD Drift's front canopy– so I designed him one to be 3D printed, obvi The original one, even when printed with 1 perimeter and minimal infill, was still far too heavy and so strong it was vast overkill. So I…
I designed and tested these replaceable parts for the Jiabaile 1/43 drift car. They increase the steering angle and make the car more controllable and suitable for tight race tracks. It’s a bit more consistent regarding the angle of…
Fan-made models for HLD inspired me to try and turn them into a full action figure using Dummy. I included only modded parts here, for everything else please use originals/included links - dummy13v1, blank chest, trigger finger hand. Most…
If you have a Switch controller with drift, and don't want to use paper or other similar materials to DIY a fix, then this plastic piece will fix it. It will put pressure on the stick housing, giving the contacts a better connection and…
1/10 drift cones for bashing or sliding!
One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No…
8mm and 13mm versions of steelhead drift bobbers, originally for my Dad. His preference/recommendation was bright &/or translucent colors. Holes for the fishing line are 1.25mm on the 8mm diameter ball and 2mm on the 13mm diameter ball.…
This is a slide on 'Skin' that fits the OEM rubber wheels of a Traxxas Stampede. The RC truck I have them on is a 2WD version, I don't know if the 4WD version has the same wheels or not... you tell me. I printed all 4 out of ABS, each one…
Reworked version of the hilarious Dashboard Drifter for easier printing and options for different width model cars.
