2,419 models
Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
The name says it all. WARNING: The top and bottom part are NOT the same!! The model was designed to make all parts printable without supports, so it is not 100% accurate with how it looks in-game. I printed it @ 0.2 layer height. The top…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Nice little functional model. Based on the model A (1930) Size approx. 1:24 Every part has been adjusted for supportless printing. Keep the orientation of the parts as shown on the picture. The whole model is bolted together with (14x)…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
To use this, you will have to increase the size of all model parts to 135% !!! (the menhir is already resized) After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as…
Print approx. €13.53–€16.53 excl. taxPreliminary estimate for one variant
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
My daughter really likes mushrooms. No, she doesn't eat them (I, on the other hand, love the taste); she just thinks mushrooms are cool. Or slay, I can't understand the youth slang. Anyway, I made her a jewelry organizer in shape of a…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Lesen Sie im Internet über die Vorteile einer Zigarettenspitze. Diese hat keinen zusätzlichen Filter, daher ist das Modell auf alle Bedürfnisse skalierbar. Die Druckkosten sind nur wenige Cent. Diese Zigarettenspitze ist speziell für die…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is a sign to tell unwanted visitors of your property, that you have active CCTV cameras running. The sign is in German telling “property video monitored”. This model is optimized for a 0.3mm layer height. This keeps your print time…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This fix the problem with Ender 3 Max Z endstop calibration using the same screws. Dimension: 41.2mm x 49.7mm x 10mm Approx print time: 45 minutes Print Settings Printer: Ender 3 Max Rafts: No Supports: No Resolution: 0.20 mm Infill: 20%…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Jednoduchý nádstavec k tyčovému vysavači umožní vysávání v úzkých prostorách. Třeba v autě při čištění prostoru podél sedaček a podobných místech. Nádstavec jsem dělal pro tyčový vysavač značky ETA Moneto AquaPlus. Kompatibilitu s jiným…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
Keder end piece for Bürstner Club 1992 This is a recreation of a end cap of a rear Kedar rail on Bürstner Club caravan build 1992. The model is made for the right side, if you need one for the left one, mirror it. You could use an UV…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Mezikus-nadstavec vysavače ETA Moneto II
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Předělaný nadstave na český TIC TAC GUN. / A modified extension for the Czech TIC TAC GUN.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I needed a layout T Square for locating the stencil on a prepared screen (screenprinting) and ordered one on Amazon ($20), but then realized it would take over a week to get here. Instead, I got a cheap hardware store yardstick and built…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a modified Y belt holder for a Bear 2.1 frame with a MK3/MK52 Y carriage to be used with an endstop switch. This is useful for upgrading a MK2 Bear to a MK2.5 using the 24VDC MK3 bed and Y carriage or for building a custom or…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Water-cooled eight-cylinder series motor, camshaft at the side, actuated by spur gears, 100 hp (or 160 hp with actuated dual lobe Roots blower), capacity of 5,018 ccm, maximum speed of 160 km/h, wheelbase of 3,290 mm, front and rear gauge…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
Many small lathes (such as my 9x20 lathe) have an internal Morse MT3 taper in the head-stock spindle. When using a center in this MT3 socket, it is very important that the socket is very clean to ensure maximum precision. This simple…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
You can use this to adapt a Valve Index Strap to the Quest 3. 2025-09-11 : I finally uploaded the Quest3 → Valve Index Gasket File with proper edits.
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Push-ups / Handstand gripper
Print approx. €9.15–€11.19 excl. taxPreliminary estimate for PETGSource material: PET
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Try PLA or better PTEG because in a car it might get too hot for PLA…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
glue the individual parts with instant glue
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Da ich 2 Kästen zusammengeschraubt hatte, brauchte ich danach Abdeckungen für die Löcher. Since I had screwed 2 cabinets together, I needed covers for the holes afterwards.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
wysokość z podstawą około 16,3cm szerokość około 14,7cm wymaga kleju do montażu (np. superglue) Włóż łączniki do jednej strony, następnie sklej obie strony ze sobą i przyklej je do podstawy Do drukowania elementów logo polecam użycie…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
Bugatti Royale Roadster Esders (1932)
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.25 mm Infill: 0 %
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Audi a8 d3 krytka ostřikovače
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
pedestal for minerals
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Oldstyle lampshade to be printed in different colors for different atmospheres. When you printed it looks like paper. The printing does not need supports
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant
Tisk na dvě poloviny, podpěry, výplně, PLA, tryska 0,4.
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Projekt podstawki pod świąteczną (lecz nie tylko) świecę z dodatkiem mchu (opcjonalnie). Projekt .GCODE dopasowany jest do pola roboczego drukarki PRUSA MK4 oraz dyszy o średnicy 0.4mm lecz plik .stl jest o większych wymiarach. Polecam,…
Print approx. €7.42–€9.07 excl. taxPreliminary estimate for one variant
Hello, yes I know, they sold it. Enjoy the print while resting.
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
Žáci si vyrobí hrací kostku, se kterou můžou procvičovat český jazyk, případně dle návodu mohou vytvořit kostku na jakékoliv jiné poučky a rozvíjet si fantazii při tvorbě pravidel a návodů na hru.
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for one variant
Stecken Sie sich Ihre Wunsch-Zahnstangengetriebe zusammen. Anwendungs-Beispiele hier: Mein selbstfahrender höhenverstellbarer kompakt zusammenfaltbarer Keyboardständer mit Subwoover Satellitenboxen! Die leichteren Komponenten sind für…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
I needed a secure mounting of a solid state relais. ( https://www.az-delivery.de/en/products/2-kanal-solid-state-relais ) Fotos show mounting and details. The following screws were used: Relais: M2.5x5 Fastening: M3x10 (self tapping)…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Prvotina-stavba autodráhy pro vnoučata a potřeba vyrobit chybějící díly
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Držák na 15 postaviček (vhodné pro majitele patnácté bonusové promo postavy Dariuse). Navíc lze vložit postavičky jak se starým podstavcem 18 mm, tak i s novým 20 mm (pro ty, kteří jako já měli v původní hře stojánky 18 mm a v rozšíření…
Print approx. €3.14–€3.83 excl. taxPreliminary estimate for one variant
FIXED MagPowerstation Q820 - iPhoneSE podstavec k bezdrátové nabíječce iPhone SE je krátký a nefunguje bezdrátové nabíjení. Tento doplněk přizvedne telefon o 15mm a zfunkční bezdrátové nabíjení iPhone SE.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
pedestal for minerals
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Tento model slouží jako stojan pro WiFi router , který zlepšuje odvod tepla a stabilitu zařízení . Zvýšená konstrukce umožňuje lepší proudění vzduchu , což pomáhá snížit přehřívání a tím zlepšit výkon a životnost routeru. Vlastnosti: ✅…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Das Teil wird an der Badewanne festgeklemmt und verhindert, dass die Badewannen-Duschwand sich beim Dusche über den Wannenrand verschiebt. Zur Befestigung wird es einfach über den schmalen Bereich der Wannenwand gesteckt und so weit…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Was asked to fix broken part on the Schylling Speedster - Silver Race Car Ride On Scooter Pressed Pressed Steel 2010. It's being donated to children. Due to strength requirements I customized many slicer settings, used a 0.6mm nozzle, and…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
The wood stove makes a lot of ash particles, which are good for putting on the driveway when it's icy from freezing rain or snow thaw-freeze cycles. We put them in a cat litter jug, but had trouble getting them to flow. This funnel was…
Print approx. €9.92–€12.12 excl. taxPreliminary estimate for one variant
Materiale: PETG eller bedre Perimetre: 6 Infill: Gyroid 15% Orientering: Bøjler printes på hovedet. Beslag printes på den inderste side. Bagerste forbinder printes på siden ind mod midte Skilt printes på ydersiden. Tekst printes for sig…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
The Busqueda battery headstrap for Quest 3 comes with a clip similar to this, but I wanted an additional one to manage cables for an EyeTrackVR setup. This clip is specifically for the rear part of the headstrap, but could be scaled up to…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Mini shelves to sidemount the Harman/Kardon Soundstick speakers onto a standing desk with a metal frame and a glass top. The tabs stick into the space between the glass top and the metal frame. I added thin, sided tape on the top part of…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Just a quick design, for a BambuLab A1 Mini LED Light Bar Mod. Other mods mount the strip in the front or directly on the vertical rail, but I wanted to mount the LEDstrip on the back of the vertical rail with a slight forward angle. The…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Výztuha podstavce k teploměru pro lepší pevnost a stabilitu z PLA
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Introduction The motherboard I have does not come with an integrated addressable RGB LED (RGBA) controller, and I wanted one that I could control from the PC directly off of a spare USB header on the motherboard. My natural choice was…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Žáci vytvoří učební pomůcku k procvičení vzorů podstatných jmen.
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
A model I made to hold the windstopper, so it goes along with our door. It is made for a windstopper with a diameter of 85-90mm and a doorwidth of 45cm. I added a bit of felt so it could slide along our hard floor. Feel free to remix the…
Print approx. €4.22–€5.15 excl. taxPreliminary estimate for one variant
Vyučující vytiskne sadu hlavolamů, které následně využívá v hodinách matematiky. Tento projekt nemá za cíl učit žáky modelování ani práci s tiskárnou.
Print approx. €4.66–€5.70 excl. taxPreliminary estimate for one variant
trzyma szpule filamętu
Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant
Podstavec pod napaječku pro kuřata
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for PETGSource material: PET
Žáci si zkusí ve výtvarné výchově navrhnout, jak by jedním obrázkem vystihli jednotlivé vzory podst. jmen. Poté si jeden vzor vyberou, navrhnou v programu Tinkercad a následně vytisknou.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Hey everybody this is V2.0 of the MiniSkidi, this is a fun introduction to robotics if you dont have much experience. Below is a link to a step by step YT build video as well as a link to my website where you can pick up the electrical…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
A 1:12 and 1:48 scale Rookie ODST miniature! This miniature is part of a set of 12 available for purchase on my website or on my Patreon until August 2024. The full version includes swappable heads, pre-supports for resin printing, and 11…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
Micro Mlok Handstop Uses standard mlok hardware Or as LayersForLife, LLC commented M4x12 or an M5x12 will also work if you are making your own mlok hardware. Category: Other
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
a simple stone arch 20k modell for diorama terrain USA Utha monumnt valey replicatet supportfree Have Fun
Joe Cool and Woodstock wall art. 0.2mm, PLA, Sovol SV01
NotaKAG M-LOK V1.1 by Qwerm A M-LOK handstop that happens to have the same size and shape as a Bravo Company KAG. Change Log: V1.1 Added models with a cutout for M-LOK t-nuts. Print mount side down. Settings used: Material: PLA+ Extruder…
This is a high poly replica of the upcoming 2020 Tesla Roadster. It was modeled in Blender over 25 hours. Any feedback would be appreciated! UPDATE 2: The front and rear logo are now available attached to the body or separate. The front…
The Toadstool Vase is a charming, nature-inspired 3D-printed piece, perfect for bringing a touch of fairy tale magic into your home. Designed to look like a real toadstool mushroom, this vase features a textured stem, a classic red cap…
-----Download the ZIP to see all the files.----- ---Modular M-LOK Handstop Kit--- Decided to expand the usability of a well known handstop kit. ---Description The Modular M-LOK Handstop Kit expands the functionality of a similar system.…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
He's 3 inches tall but he ain't small! Watch your ankles around this fierce fighter. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
Univerzální podstavec pod figurku Universal pedestal under the figurine
For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3
There really isn't a lot to this model. I needed a handstop for my mp5, so I drew one up real quick and printed it. I thought other people might find it useful, so I'm publishing it here.
MLOK 5.5" rail guards and handstop for any MLOK series handguard. STL files and Solidworks files for each part attached. Use Supports touching buildplate only.
A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations) Helps keep your hand from…
I just made a Dummy 13 and wanted to customize him
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
A rail stopper to screw to your 2020 extrusion at the end of your linear rail to stop the carriage from falling off. It needs an 8mm M3 screw. Remixed from the Voron trident design, and step/f3d file included for modifications.
Someone wanted over 8 dollars for the files of this handstop, and then was rude to the people who asked him about that ridiculous price, so I decided to make an identical copy of it and release it for free :) 3D printing is a wonderful…
No support required
I just wanted to see if I can design this myself. I'd use ASA for practical use. You'd want high wall counts and relatively high infill so it doesn't just crumbles under load.
A Mod for relocating the Endstop-Y in Voron 2.4. You do not loose an Y print range. You need 3 x M3 heatinserts, 2 longer M3 screws for attaching the A motor. The bumper distance is adjustable.
NotaSlate M-LOK V1.1 by Qwerm A small M-LOK handstop that happens to have the same size and shape as a Slate Stop. Includes 2 different sized grooves. Since the part is relatively small I have included two different mounting options…
Model directly from the game. Can be cut up to make it easier to print
Update 5/27/2019: Here is the endstop/limit switch cover that I used that goes well with this part: https://www.thingiverse.com/thing:3394736 UPDATE: 3/3/2019: Uploaded V3 of this part which should fit Early Ender3's with longer stepper…
![ODST Armor For Dummy 13 [for beta 13]](https://media.printables.com/media/prints/855360/images/6576967_91b72d4f-8642-4806-bd08-02ca5a11a98a_d1cf8550-dea9-41d7-b046-b523f848bc9f/4.jpg)
