Liczymy pasujące modele…
Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nice little functional model. Based on the model A (1930) Size approx. 1:24 Every part has been adjusted for supportless printing. Keep the orientation of the parts as shown on the picture. The whole model is bolted together with (14x)…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To use this, you will have to increase the size of all model parts to 135% !!! (the menhir is already resized) After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as…
Wydruk około 13,53 €–16,53 € nettoWstępna wycena jednego wariantu
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daughter really likes mushrooms. No, she doesn't eat them (I, on the other hand, love the taste); she just thinks mushrooms are cool. Or slay, I can't understand the youth slang. Anyway, I made her a jewelry organizer in shape of a…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Lesen Sie im Internet über die Vorteile einer Zigarettenspitze. Diese hat keinen zusätzlichen Filter, daher ist das Modell auf alle Bedürfnisse skalierbar. Die Druckkosten sind nur wenige Cent. Diese Zigarettenspitze ist speziell für die…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
This fix the problem with Ender 3 Max Z endstop calibration using the same screws. Dimension: 41.2mm x 49.7mm x 10mm Approx print time: 45 minutes Print Settings Printer: Ender 3 Max Rafts: No Supports: No Resolution: 0.20 mm Infill: 20%…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Jednoduchý nádstavec k tyčovému vysavači umožní vysávání v úzkých prostorách. Třeba v autě při čištění prostoru podél sedaček a podobných místech. Nádstavec jsem dělal pro tyčový vysavač značky ETA Moneto AquaPlus. Kompatibilitu s jiným…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keder end piece for Bürstner Club 1992 This is a recreation of a end cap of a rear Kedar rail on Bürstner Club caravan build 1992. The model is made for the right side, if you need one for the left one, mirror it. You could use an UV…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Mezikus-nadstavec vysavače ETA Moneto II
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Předělaný nadstave na český TIC TAC GUN. / A modified extension for the Czech TIC TAC GUN.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I needed a layout T Square for locating the stencil on a prepared screen (screenprinting) and ordered one on Amazon ($20), but then realized it would take over a week to get here. Instead, I got a cheap hardware store yardstick and built…
Wydruk około 2,50 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Water-cooled eight-cylinder series motor, camshaft at the side, actuated by spur gears, 100 hp (or 160 hp with actuated dual lobe Roots blower), capacity of 5,018 ccm, maximum speed of 160 km/h, wheelbase of 3,290 mm, front and rear gauge…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
You can use this to adapt a Valve Index Strap to the Quest 3. 2025-09-11 : I finally uploaded the Quest3 → Valve Index Gasket File with proper edits.
Wydruk około 1,04 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Push-ups / Handstand gripper
Wydruk około 9,15 €–11,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Try PLA or better PTEG because in a car it might get too hot for PLA…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
glue the individual parts with instant glue
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
wysokość z podstawą około 16,3cm szerokość około 14,7cm wymaga kleju do montażu (np. superglue) Włóż łączniki do jednej strony, następnie sklej obie strony ze sobą i przyklej je do podstawy Do drukowania elementów logo polecam użycie…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bugatti Royale Roadster Esders (1932)
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.25 mm Infill: 0 %
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Oldstyle lampshade to be printed in different colors for different atmospheres. When you printed it looks like paper. The printing does not need supports
Wydruk około 3,97 €–4,86 € nettoWstępna wycena jednego wariantu
Tisk na dvě poloviny, podpěry, výplně, PLA, tryska 0,4.
Wydruk około 2,67 €–3,27 € nettoWstępna wycena jednego wariantu
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Projekt podstawki pod świąteczną (lecz nie tylko) świecę z dodatkiem mchu (opcjonalnie). Projekt .GCODE dopasowany jest do pola roboczego drukarki PRUSA MK4 oraz dyszy o średnicy 0.4mm lecz plik .stl jest o większych wymiarach. Polecam,…
Wydruk około 7,42 €–9,07 € nettoWstępna wycena jednego wariantu
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Žáci si vyrobí hrací kostku, se kterou můžou procvičovat český jazyk, případně dle návodu mohou vytvořit kostku na jakékoliv jiné poučky a rozvíjet si fantazii při tvorbě pravidel a návodů na hru.
Wydruk około 3,75 €–4,58 € nettoWstępna wycena jednego wariantu
Stecken Sie sich Ihre Wunsch-Zahnstangengetriebe zusammen. Anwendungs-Beispiele hier: Mein selbstfahrender höhenverstellbarer kompakt zusammenfaltbarer Keyboardständer mit Subwoover Satellitenboxen! Die leichteren Komponenten sind für…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a secure mounting of a solid state relais. ( https://www.az-delivery.de/en/products/2-kanal-solid-state-relais ) Fotos show mounting and details. The following screws were used: Relais: M2.5x5 Fastening: M3x10 (self tapping)…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Prvotina-stavba autodráhy pro vnoučata a potřeba vyrobit chybějící díly
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Držák na 15 postaviček (vhodné pro majitele patnácté bonusové promo postavy Dariuse). Navíc lze vložit postavičky jak se starým podstavcem 18 mm, tak i s novým 20 mm (pro ty, kteří jako já měli v původní hře stojánky 18 mm a v rozšíření…
Wydruk około 3,14 €–3,83 € nettoWstępna wycena jednego wariantu
FIXED MagPowerstation Q820 - iPhoneSE podstavec k bezdrátové nabíječce iPhone SE je krátký a nefunguje bezdrátové nabíjení. Tento doplněk přizvedne telefon o 15mm a zfunkční bezdrátové nabíjení iPhone SE.
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Tento model slouží jako stojan pro WiFi router , který zlepšuje odvod tepla a stabilitu zařízení . Zvýšená konstrukce umožňuje lepší proudění vzduchu , což pomáhá snížit přehřívání a tím zlepšit výkon a životnost routeru. Vlastnosti: ✅…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Das Teil wird an der Badewanne festgeklemmt und verhindert, dass die Badewannen-Duschwand sich beim Dusche über den Wannenrand verschiebt. Zur Befestigung wird es einfach über den schmalen Bereich der Wannenwand gesteckt und so weit…
Wydruk około 6,62 €–8,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Was asked to fix broken part on the Schylling Speedster - Silver Race Car Ride On Scooter Pressed Pressed Steel 2010. It's being donated to children. Due to strength requirements I customized many slicer settings, used a 0.6mm nozzle, and…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Materiale: PETG eller bedre Perimetre: 6 Infill: Gyroid 15% Orientering: Bøjler printes på hovedet. Beslag printes på den inderste side. Bagerste forbinder printes på siden ind mod midte Skilt printes på ydersiden. Tekst printes for sig…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Busqueda battery headstrap for Quest 3 comes with a clip similar to this, but I wanted an additional one to manage cables for an EyeTrackVR setup. This clip is specifically for the rear part of the headstrap, but could be scaled up to…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Mini shelves to sidemount the Harman/Kardon Soundstick speakers onto a standing desk with a metal frame and a glass top. The tabs stick into the space between the glass top and the metal frame. I added thin, sided tape on the top part of…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Just a quick design, for a BambuLab A1 Mini LED Light Bar Mod. Other mods mount the strip in the front or directly on the vertical rail, but I wanted to mount the LEDstrip on the back of the vertical rail with a slight forward angle. The…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Výztuha podstavce k teploměru pro lepší pevnost a stabilitu z PLA
Wydruk około 1,32 €–1,62 € nettoWstępna wycena jednego wariantu
Introduction The motherboard I have does not come with an integrated addressable RGB LED (RGBA) controller, and I wanted one that I could control from the PC directly off of a spare USB header on the motherboard. My natural choice was…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Žáci vytvoří učební pomůcku k procvičení vzorů podstatných jmen.
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
A model I made to hold the windstopper, so it goes along with our door. It is made for a windstopper with a diameter of 85-90mm and a doorwidth of 45cm. I added a bit of felt so it could slide along our hard floor. Feel free to remix the…
Wydruk około 4,22 €–5,15 € nettoWstępna wycena jednego wariantu
Vyučující vytiskne sadu hlavolamů, které následně využívá v hodinách matematiky. Tento projekt nemá za cíl učit žáky modelování ani práci s tiskárnou.
Wydruk około 4,66 €–5,70 € nettoWstępna wycena jednego wariantu
trzyma szpule filamętu
Wydruk około 7,64 €–9,34 € nettoWstępna wycena jednego wariantu
Žáci si zkusí ve výtvarné výchově navrhnout, jak by jedním obrázkem vystihli jednotlivé vzory podst. jmen. Poté si jeden vzor vyberou, navrhnou v programu Tinkercad a následně vytisknou.
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Hey everybody this is V2.0 of the MiniSkidi, this is a fun introduction to robotics if you dont have much experience. Below is a link to a step by step YT build video as well as a link to my website where you can pick up the electrical…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
A 1:12 and 1:48 scale Rookie ODST miniature! This miniature is part of a set of 12 available for purchase on my website or on my Patreon until August 2024. The full version includes swappable heads, pre-supports for resin printing, and 11…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
Micro Mlok Handstop Uses standard mlok hardware Or as LayersForLife, LLC commented M4x12 or an M5x12 will also work if you are making your own mlok hardware. Category: Other
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
a simple stone arch 20k modell for diorama terrain USA Utha monumnt valey replicatet supportfree Have Fun
Joe Cool and Woodstock wall art. 0.2mm, PLA, Sovol SV01
NotaKAG M-LOK V1.1 by Qwerm A M-LOK handstop that happens to have the same size and shape as a Bravo Company KAG. Change Log: V1.1 Added models with a cutout for M-LOK t-nuts. Print mount side down. Settings used: Material: PLA+ Extruder…
This is a high poly replica of the upcoming 2020 Tesla Roadster. It was modeled in Blender over 25 hours. Any feedback would be appreciated! UPDATE 2: The front and rear logo are now available attached to the body or separate. The front…
The Toadstool Vase is a charming, nature-inspired 3D-printed piece, perfect for bringing a touch of fairy tale magic into your home. Designed to look like a real toadstool mushroom, this vase features a textured stem, a classic red cap…
-----Download the ZIP to see all the files.----- ---Modular M-LOK Handstop Kit--- Decided to expand the usability of a well known handstop kit. ---Description The Modular M-LOK Handstop Kit expands the functionality of a similar system.…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
He's 3 inches tall but he ain't small! Watch your ankles around this fierce fighter. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
Univerzální podstavec pod figurku Universal pedestal under the figurine
For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3
There really isn't a lot to this model. I needed a handstop for my mp5, so I drew one up real quick and printed it. I thought other people might find it useful, so I'm publishing it here.
MLOK 5.5" rail guards and handstop for any MLOK series handguard. STL files and Solidworks files for each part attached. Use Supports touching buildplate only.
A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations) Helps keep your hand from…
I just made a Dummy 13 and wanted to customize him
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
A rail stopper to screw to your 2020 extrusion at the end of your linear rail to stop the carriage from falling off. It needs an 8mm M3 screw. Remixed from the Voron trident design, and step/f3d file included for modifications.
Someone wanted over 8 dollars for the files of this handstop, and then was rude to the people who asked him about that ridiculous price, so I decided to make an identical copy of it and release it for free :) 3D printing is a wonderful…
No support required
I just wanted to see if I can design this myself. I'd use ASA for practical use. You'd want high wall counts and relatively high infill so it doesn't just crumbles under load.
A Mod for relocating the Endstop-Y in Voron 2.4. You do not loose an Y print range. You need 3 x M3 heatinserts, 2 longer M3 screws for attaching the A motor. The bumper distance is adjustable.
NotaSlate M-LOK V1.1 by Qwerm A small M-LOK handstop that happens to have the same size and shape as a Slate Stop. Includes 2 different sized grooves. Since the part is relatively small I have included two different mounting options…
Model directly from the game. Can be cut up to make it easier to print
Update 5/27/2019: Here is the endstop/limit switch cover that I used that goes well with this part: https://www.thingiverse.com/thing:3394736 UPDATE: 3/3/2019: Uploaded V3 of this part which should fit Early Ender3's with longer stepper…
For this one go WHITE - BLACK - YELLOW! Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move…
This is a replica model for Mercedes Roadster 1960 (WIP). I'm not sure if it is possible to connect pins & tires to main since the body has fender skirt. Please feedback. update01 : I've added main body parts one by one for remix editors.…
English The original model from Thingiverse needs supports, but they are difficult to remove (at least without destroying the model :-)). I have modified the model so that it rests completely on the print bed, so no supports are needed.…
This design removes the teeth protrusions from the track and instead adds them to the wheel similar to how the excavator tracks function. This helps the system to be more efficient and keeps the track from riding up onto the wheel when…
Simple handstop for that only requires one MLOK slot. Designed to use metric M4 screws such as these ( https://www.amazon.com/dp/B0895GGH7C ), but it can be modified to use larger ones.
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…
The officially released Voron 0.2 X and Y limit switches are implemented using an unlimited switch method. If your motherboard does not support the unlimited switch solution or if you still prefer to use limited switches, you can replace…
Cute and fun mushrooms! You can print a house or just a simple version. There are a bunch of files for different variations. Cap is common for all mushrooms. I printed in default orientation, with supports on the build plate. Stalk has…
This SCAD file can produce any of the headstones shown and an unlimited variety more.
![ODST Armor For Dummy 13 [for beta 13]](https://media.printables.com/media/prints/855360/images/6576967_91b72d4f-8642-4806-bd08-02ca5a11a98a_d1cf8550-dea9-41d7-b046-b523f848bc9f/4.jpg)
