Counting matching models…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…
Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…
Backside mount for the EBB42, works with and without the filament sensor Recommended print settings Use PETG, ASA or ABS for the motor mount, the EBB mount and the cover can be printed in PLA Infill: 35%+ Wall lines: 3 Bill of materials…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
This is a modification I made to one of our Vorons, I wanted to use a CAN based toolhead PCB to reduce wire break issues but wanted to keep the cable drag chains. This is what I ended up with and it works great! You will need: -…
This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…
Allows you to use EBB42 attachment with Voron. I use it with LGX on my Voron2.4. BOM: 7 threaded inserts 3 M3x22 Socket Button Head Cap Screws 7 M3x6 any screws (4 to hold EBB42 and 3 to hold dragchain) Print settings: 0.4 nozzle 4 walls…
"A" pillar with place for BTT EBB42 PCB for 4 line pico MMU. Full Documentation for pico MMU https://github.com/lhndo/LH-Stinger/wiki/Pico-MMU
This replaces the EVA cable guide mount with a frame to attach a board meant for a 42mm stepper such as a BigTreeTech EBB42. If you are running input shaper on klipper you will need to set axes_map: z, x, -y This does mean that there is…
Just a small adapter plate to add a ebb42 can board to a H2 Extruder. Recommended this be made from aluminum or a high temp plastic anything with a Glass transition temp of 100+C especially if your printing in a high ambient temp…
EVA 3 compatible mount of BigTreeTech EBB42 Toolboard and Phaetus Apus extruder. BOM Note: Some screws can be salvaged from the Apus itself EBB42 Item Qty Description M3 x 4mm Heat Inserts 13 6 for extruder mount, 7 for toolboard mount M3…
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
Es handelt sich um einen Adapter wenn ihr einen ebb36 habt aber einen ebb42 montieren wollt.
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
This is a mount for the Bigtreetech EBB42 Can modul
1/25/23 - Added a second version where the top strain relief is removed and zip tie holes are added to the left side. I found it more stable when securing the cable on the side removing the flex that was present in the upper part of the…
Mockup of Bigtreetech's EBB42 Gen2 v1.0 for use with modeling mounts, etc. Generated in Fusion 360 based off the images of the board on the BTTWiki. PCB components were pulled from GrabCAD and may not exactly match the product. Please do…
Design for a CAN Toolhead board to suit a MicroSwiss NG Extruder setup with a MGN12H Linear Rail
Will need: 4x 3mm heat inserts 6x M3 6mm screws 3x M3 8mm screws 2x 20mm standoffs
I have re-modeled all the pieces to accommodate a Stealthburner with the following modifications: Chaoticlab TAP CNC (I am pretty sure everything works just as well even if you do not have a TAP, however it is untested) Bigtreetech EBB42…
I have printed & installed this design personally. But it is considered an experimental toolhead design as I do not have many hours on it. It allows you to use your Sprite extruder with an MGN12H rail on the X gantry. Belt hooks in this…
Mount for the BTT EBB42 CAN Toolboard and Microswiss NG extruder for Ender 3 / CR10. Rather than mounting this directly on the stepper, this allows the board to be mounted horizontally to preserve function of the ADXL chip (at least for…
Edit: You must remove the RGB, I2C, and PROBE pin headers on the EBB42 to fit the tested models. I desoldered the pin headers, but cutting them off with diagonal cutters is probably good enough. I added an untested version of the x0 arm…
Modified original version to use Hex Nuts for mounting over heat inserts, creating additional spacing around corners of the board due to needing to increase thickness of the posts to accommodate M3 hex nuts.
This is a remix of the original design . Lightweight holder for the EBB42 tool board mounted directly on the Bondtech LGX. The installation requires the following: 4 pcs - M3 Standoff Pillar screws (you will find this in the LGX package)…
use M3 heat inserts to mount the ebb
BOM: - 6x m3 heat inserts - 6x m3 10mm BHCS - 3x JST XH2.54 2 pins - 2x longer screws for motor to attach to standoffs (i think m3 x 16 should do it, just a guess) - about 3 zipties (if they even will fit rofl) Instructions: place heat…
A CAN cable stress relief that mounts between the EBB42 board and the NEMA17 stepper substituting stock spacers.
Pico MMU Cover (Remix) This is a remix of Janusz's "A" pillar & EBB42 for 4 line pico MMU . Parts Needed 4x VORON - Heat Set Insert M3x5x4 4x M3x25 socket screw About the Pico MMU The Pico MMU is an open-source multi-material upgrade for…
CANBus cable strain relief for BTT EBB42 board piggybacking an NEMA17 42mm extruder motor. .3mf and .step files of the model included, also the Fusion360 archive file if someone wishes to modify the model.
Remixed version from @billyd of the EBB42 mount with an Orbiter v2 extruder
The models on BTT's Github are way too detailed for most work. Part of this is the fact that their CAD package inscribed lettering on most of the individual parts. There were a lot of 89.9995* angles in the original models that gave me…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
This was a remix of Nick1's alternate A-pillar to fit the Neptune 4 series printers. When using the included mounting block for the top of the gantry, the power and usb connections will point to the back of the machine instead of hanging…
A mount to use an EBB42-style square toolhead board with the Galileo 2 extruder on the Voron Stealthburner. Compatible with original G2E parts and the original CB-G2 cable gland mount. I've included a modified cable gland mount with…
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
simple mount and cover for attaching a btt ebb42 can toolhead board to to your stealthburner fits well print with supports
I have a model of the wire thing on the USB side, but ended up just using my existing CAN setup.
Total new design. Much improved. Designed to fir with this back cover.
I abandoned this model in favor of the adapter mount included in this set of parts . I wanted to use an eddy coil scanner on my K1. I wanted to run mainline Klipper. This meant that I had to replace the motherboard with something else. I…
This is a remix of a BTT EBB42 toolboard Mount originally posted by mmullerphoto to be used for mounting the BTT EBB42 Gen2 toolboard onto a RatRig vCore 3.1 printer using Eva print carriage system. A shortened cable guide from the Eva…
Printing Settings : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Assembly for the KNOMI2 : 1) M3x4.5x3 Heat Inserts - 3pcs 2) M3x6 Cap/Button Screw - 3pcs Assembly for the…
BOM m3 spacer – 4 m3 nut (optional) - 4 m3 x 8 bolt m3 hammer nut 2nd version does not require nuts, and has slimmer hold of an extrusion, can be mounted next to installed panel
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
Using RatOS with the EBB42 toolboard means connecting a chunky USB C cable to the toolboard. These cables aren't designed for applications involving motion, so need a lot of reinforcement and strain relief - the other designs I've seen do…
Remix of Vittop's EBB42 canbus Voron attachment with dragchain mount for drag chains that have 2 holes instead of 3.
Mount to add the BTT EBB42 Toolboard to your Sovol SV08 printer. Requires 4 x 5mmx4mm M3 Voron spec heat inserts. Default version includes a fix to stop the extruder arm idler gear pin slipping out. There's an alternative that omits this.…
If you use the EBB42, or any other board mounted to the back side of the extruder motor, you can use the cable guide system that is in the original design. I created this modification of the LGX Drive mount to include a Cable Guide mount…
VC3.1 200 has a small space under the top, so mount is lowered and the cable mounting is oriented forward to prevent the cable from scraping the housing. Of course, it is also suitable for the larger RatRig V-Core 300 - 500. The mounting…
Adapters to install ebb36 on Ebb42 mounts for Vcore(Ratrig)
Modified EBB Front part with strain relief inspired by another design , so it provides better support for USB-C and power cable. Note: design is based on converted STL, as I didn't notice link to Onshape. 🙈 It's huge and PITA to work…
I abandoned this approach and designed a new set of parts. I took all the Creality electronics out of my K1. I installed a BTT Manta M5P, a CB2, an EBB42 toolhead board, and a Cartographer Eddy scanner. I couldn't find any fan shrouds…
bigtreetech ebb42 mount to pair with my biqu h2v2s extruder mount https://www.printables.com/model/924433-biqu-h2v2s-mount-kobra-max-vyper-kobra-plus
EBB42 Mount designed for V-Minion/EVA 2.4 platform
I went looking for an EBB42 mount to the back of the stealthburner, but most everything that I found would fit a obiter X.X extruder for the stealthburner. As like the rest of my designs/work that I do, it's all done in Microsoft 3D…
This model mounts a Mellow SHT42 or Bigtreetech EBB42 to the stepper motor of a Bigtreetech Nebula Extruder. You will need to print 1x PCB mount and 2x spacers and supply 2 35-40mm M3 flat head screws and two brass standoffs. My standoffs…
Change holder to support Can connector
The EBB42 Board adapter is very nice, but it sticks out too far, running into the cover and also the bottom of the EBB42 has components that protrude. This model fixes both problems by combining the Extruder Main Body with the EBB42…
Now, the mainboard chassis for the OEM Kobra Neo mainboard does not fit an SKR Mini E3 V3, let alone adding the EBB42 to the same area. Side note: I have the EBB42 down in the mainboard chassis for now and not mounted on the printhead,…
This is a mount for ebb42 to terminator without drilling. Holes in the model are tight. tap'em if needed. PETG is fine. Use included spacers. pancake cables are too short for most of the places. EDIT: new model with a place for ziptie.…
I made some cutouts to shed some weight and give it a better look IMO. I also did away with the heatset inserts. I built in standoffs and sized the holes to simply screw m3 screws right in. I printed it in Overture Black PETG and it has…
print as 2 separate bodies, then join with CA glue
see through part of cpap hose seemed a little thin afraid the toolboard would melt it, so made little thin layer between Which the slicer would not see (too thin at .2mm wide) so fake made it .4mm thick and then it still only printed it…
Adaptador para reemplazar el THR 2.0 de la KLP 230 por un Bigtreetech EBB42. Incluye también una modificación para el ventilador 5020 de la máquina. Lo imprimí en nailon ePA-CF debido a la alta temperatura de la cámara y su proximidad a…
Ikea Skadis mounts for LH Pico MMU. Easy L/R brackets courtesy of ncapz on the LH Discord. EBB42 mounting courtesy of Nick1. For the 3-Lane MMU : PicoMMU Skadis Left PicoMMU Skadis Right For the 4-Lane MMU : PicoMMU Skadis Left PicoMMU…
Spacer to align eddy on original screw for stock inductive sensor. Use with skinny eddy. Use with any version of BTT EDDY with EDDY-NG. Spacing from bed is just right :-). You can use with stock THR via USB, unfortunatly my THR fall apart…
If you want to put use canbus on your printer with the H2 Extruder and the MAD Shroud ( LINK ) You will need 4x M3x4mm OD 4.5mm Heated inserts 4x M3x20mm Socket cap screw Mount the bracket on the 4 opening holes on the MAD Shroud Base Now…
This is a great fan shroud that allows the use of a BMG extruder + V6 together with no gap and very little tubing. As the gantry on an Aquila varies slightly from Ender, some modifications were needed to be able to mount it. Below you'll…
EBB42 Mount for Microswiss NG Revo Mount has built in strain relief fot the cable as the first one i printed did not have and the cable broke off after about a week of printing. Use 2 zip ties to secure the cable to the strain relief. The…
I have only been printing with this for a relatively short time. I have USB-C cable and a CF9.02.08 chainflex cable attached which is relatively heavy but it seems the mount is definitely strong enough even when I push my V-Core 500 to…
This is a mount for the EBB42 and similar boards. It attaches to the back of the orbiter 2.0 . you will need 5 3mm threaded inserts and 6 3x35mm Hex Cap screws.
I added EBBsupport to MFBS Ultralight back-plate-top. I did this by combining the MFBS' design with that from Ratrig.
Custom Stealhburner setup adapted for Ender 3 with EBB42 and EDDY probe. This thing works surprisingly well, but definitely needs more polishing. The x motor cover is needed to relocate the switch position - it is not needed when using…
What and Why? This is a remix of @JesseCrash's PCB mount, PCB cover and mount extension to fill out the bottom of the Pico MMU. I have my Pico MMU mounted at the top of my Ender 3 V3 SE, and ran into an issue with the PTFE tubes hitting…
The provided EBB42 fanduct mount did not fit for me, fan and PCB were touching so I elongated it a bit. While at it, added a version with heat set inserts instead of hex nuts. In my opinion prints cleaner and it much easier to assemble,…
N4Plus-VoronSB-H2V2X-Mount-Remix v1 Hardware needed: 1) Cap Screw M3x6 - 4pcs (for MGN12H Linear Rail Block) 2) Heat Threaded Insert M3x5x4 - 4pcs (for Voron Toolhead) 3) Timing Belt GT2 LL-2GT width 6mm Print Setting Perimeter: 3…
Requires 5 M3 * 4 * 5 heatserts
Printer: RatRig v3.1 Extruder: TBG-AIR v2 Toolboard: EBB42 v1.2 The hotend connector was resoldering to connect wires from the top.
box for BTT EBB42 CAN v1.2 board for Tronxy XY X5SA Pro printer I upgraded my X5SA Pro to Klipper and got rid of the cable nonsense from Tronxy by using CAN, in the case the BigTreeTech/BTT/Biqu EBB42 CAN v1.2 board. This is mounted to…
This mount utilizes the 3 mounting points on the Mantis carriage, probably for cable chain. Uses M3x5x4 heat inserts. The mount has 3 holes corresponding to the ones on the gantry. M3x8 SHCS is recommended to mount. A dent was made to…
Modifikation des Druckkopfes um ein BTT EBB 42 Board verbauen zu können. Zusätzlich durch die Magneten einfachere Wartung. Benötigte Teile für den Umbau: induktive Probe 5V M8 z.B. LJ8A3-2-Z/AX (orginal Probe arbeitet mit 24V wird von…
Printing Settings : Layer Height: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Material: PETG/ABS/ASA Assembly for the MantisDuct-Remix v1 : 1) 5015 24v Blower - 2pcs 2) 3010 24v Fan - 1pcs 3)…
This toolhead design is for sensorless homing & quick nozzle swap using AD5X Hotend better than E3D Revo Nozzle. Why i said it's better than E3D Revo Nozzle? When until certain usage, the nozzle started to have some filament leakage &…
mounts to the cable chain mount above the printhead, i designed it for my h2v2s conversion but should work with most hotends and printers
After purchasing the KLP1, I was unpleasantly surprised that its hotend cooler never turns off. Another downside was the inductive sensor. I had an EBB42 in my stash, which I had long wanted to use for my heavily modified Anet A8 plus,…
Remix of the V5 Toolhead adapted for BTT EBB42 Gen 2 . Gen 2 is 5mm taller than Gen 1 and has larger components on the rear face. First time using Fusion 360 — I did my best but the design may not be optimal. Feedback welcome! Changes:…
This was made for using the EBB42 Gen2 board on a K1 series. The cable holder is for using the stock K1 cable with a XT30U (2+2) soldered with heat shrink. Newer style Creality 3010 fan or HoneyBadger 3010 with the recessed mounting…
I really like the E34M1 toolhead but there PCB toolhead mount does not fit the EBB42 gen2 so I made a few chnges by rasing the shroud mount up a bit then also added PUG connection for cable relief. PUG I used…
Qiditech X Plus3 and X Max3 toolhead back cover expanded to accommodate BigTreeTech EBB42 Gen2 V1.0 along with 25mm fan
I wanted to tune my Sovol SV06 Plus. My KUSBA didn't work anymore and I had a whole bunch of extra EBB42s. EBB42s have an ADXL345. I flashed one for USB and designed this mount. I used it to measure the resonance on the y-axis of my…
Modeled up to allow for the usage of Parametric Umbilical Glands for better strain relief and reliability. Tool board was printed with 4 bolt clamp originally, however, after printing and install, the clamp was modified to allow for T0 to…
Mount a BigTreeTech EBB42 Gen 2 V1.0 onto your X Plus 3 (Potentially the X Smart 3 and X Max 3) You will probably need a deeper rear toolhead cover. I've got one with a 25mm fan. FYI The board is not compatible with the stock hot end due…
ABB42 mount to conecto on the side of Direct Drive Sprite Se of Creality.
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
This model mounts a Mellow SHT42 or Bigtreetech EBB42 to the stepper motor of a Bigtreetech Nebula Extruder. You will need to print 1x PCB mount and 2x spacers and supply 2 35-40mm M3 flat head screws and two brass standoffs. My standoffs…
