1,574 models
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
Paddleboard (sup) fin. Designed as a spare fin in case of forgetting original fin at home. Compatible with US-Box attachment system secured by screw or by quick-click rubber pin. Recommended print from PETG with 100% infill / note that…
I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.
I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…
Geändertes Cover, das besser passt und Probleme beim Kalibrieren der X-Achse verhindert da das original Cover manchmal nicht ganz anliegt ########## Übersetzung des original Textes von @Stefan_106413 ########## Die originale Abdeckung für…
Einfacher Marker Halter für ein Whiteboard oder für eine Magnetwand. Passend für alle Marker mit max. 18 mm Durchmesser. Das Ganze ist mit 5x1 mm Magneten befestigt. Magneten:…
A quick remix of @SoloTSi97's excellent FireBoard 2 Minimalist Case, with hood and small internal mangets. I sometimes run long cooks and although the FireBoard 2 is “weather resistant," I wanted to add a hood to keep rain and direct sun…
I had two screws in the wall that didn't quite lineup for the whiteboard I wanted to mount so I made this adapter. I was going to glue it to the whiteboard but I didn't need to. I just tightened the screws to the adaptor and then hung the…
My Kludd hardware started chipping after many years of use, so I mocked up and printed an exact duplicate for the original Ikea Kludd hardware. I recommend printing this with PLA+ or better, and using the 0.20mm Strength option in Prusa…
Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…
I wanted a way to organize my SOTA/POTA activation and to keep things from falling in the snow/mud. I saw a similar design being used on youtube and I made my own version.
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
A nice wallmount holder designed for the “ Magnetoplan Design Whiteboard CC ” whiteboards. Printer Brand: Prusa Printer: I3 MK3S+ Rafts: No Supports: Yes Resolution: 0.4 Nozzle Infill: 25% Layer height: 0,20 mm Used Filament: PET-G Black…
This is a remixed fingerboard with the “ MINI 13 Printable Jointed Figure ”'s feet attached to it so you can put your own MINI 13 on there. Now you can ride around on rails, ramps and more! Orientation is optimised for printing, print…
Raspberry Pi 4 are hard to source. Using Raspberry CM4 modules together with a cheap baseboard can be a performant and compatible alternative. The CM4-Nano baseboards are sub 20 euro, so they fit well. This is a relatively simple mount…
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
A cutting guide for high baseboards
Printed in two parts easily removable to be stored in a game box Size 90 mm, 85 mm high, thickness 3 mm Can hold 100 sleeved cards ( ultra pro) or 200 without sleeves Perfect for games like Clank! or magic the gathering . The cards are…
This skateboard is a great fidget. It uses 6 mm outside diameter bearings for wheels. The 4 bearings are from Amazon, 50 pieces, $11, PN 683-ZZ ball bearings. The 2 axles are 3 mm brass round rods, lathe bar stock from Amazon, Favordrory,…
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
I made these personalised whiteboard marker lids for my students (primary school). I'm sure they will now really look after them well ;-) Just change the name in the “Name” sketch to anything you like.
Simple magnetic holders for the slim style (Expo or other brands with a similar style) dry erase pens. The magnet is inserted into the print with a print pause at the appropriate layer. Required Non-Printable Parts: 1x – 12.7 x 3.2mm disc…
A magnetic holder for whiteboard makers reusing HDD magnets HDDs break if you use a PC for a long time. The only way to use a ruined HDD is to use a magnet, but HDD magnets are shaped strangely and cannot be used normally, which is a…
Whiteboard-Marker-Holder Diese Halterung ist für Whiteboard Marker die ich auf Pollin fand: https://www.pollin.de/p/whiteboard-stifte-890317. Es gehen auch andere Stifte mit einem Durchmesser von 21mm. Für die Befestigung nahm ich…
peg remixed to hold posters etc… Hookbit almost everywhere! lite version weighting only 3 grams available here: https://www.printables.com/model/1395752-v2-lite-of-noticeboard-extension-hook-only-3-grams
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
This modular whiteboard organizer is designed to keep your workspace tidy and efficient. It securely holds a whiteboard cleaner and marker (compatible with Bic Velleda ), ensuring everything you need is always within reach. Key Features:…
Designed to hold the radio on the right side and the battery below it. I held them both together with my wife's hairtie. Then the left side has three versions depending on what size notecard you want to use or to hold your phone. The…
For gluing our baseboards to the wall, I designed some helping holder onto which some weight can be put to hold the said boards in place. As you can see in the pictures we used soda bottles as weights as a bottle is an easy weighted…
Once printed, insert the hook inside the metal slot on the back of the whiteboard (2 hangers used minimum is recommended), and twist to lock it in place. You may use a self-adhesive Command double-sided strips to secure the back to the…
This is a loveboard cover for the Prusa MK4. I have a MMU and realized that everything else has a lot of color, and the printhead needed a little more! I didn't add much to the model, only the text and the coloring - it requires no…
Design Concept This whiteboard marker holder is designed for convenient organization and accessibility. Its compact design ensures that markers are always within easy reach and stored neatly. The width of the hole in the table is 32 mm,…
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Skateboard for DUMMY 13. Now your dummy can shred like the ripper it is, right up until it faceplants. Seriously though, this is a non-functional skateboard best used for posing ground or air tricks using the Lucky 13 display stand. There…
I use PET with 15% infill. Supports on rails only.
added a v2 with thicker keychain loop
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a fully functional Fingerboard I made. Use glue to attach the trucks and wheels. Make sure you upload your makes. If you like this model, you know what to do... hit that like button! Make sure to follow us so you get notified when…
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
Wall mounted holder for Skateboard / Longboard. Total width: 25 cm Two versions for different wheel diameters: 70 mm and 80 mm Update: As requested, I uploaded version without the screw holes. Happy Printing! Print instructions Print…
Similar to other designs but designed to print without supports. The only hardware required is two skateboard bearings. The mount and spool holder are designed to snap in place ( see image for more details). A long and short variation are…
Skateboard Wall Mount Halter If you like it --> press like it :-) Wheel Diameter up to 60mm width for wheels 35mm Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: tree 40 degrees only on bed Resolution: 0.2 Infill: 100 %…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
Easy to print Skateboard you can play with on your tabletop or other places. It flips jumps and drives nice and is very durable. Perfect for all age groups :) Prusa edition: It has the Prusa name engraved :) You will not need any glue due…
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Support needed, infill 15%, no brim, no rafts.
This is a bracket to hang skateboard decks on the wall as a decoration. There are two holes to dowel the bracket to the wall and four to attach the deck. Print on the head as shown in the picture. On the top is a slot for led strips in…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a model of 6008ZZ Bearing, that is used to test fit sizes in Fusion 360. It is non functional, however offers dimensional correctness for use in designs. Category: Robotics
Strong model to firmly secure your skateboard to the wall for easy display The wheels of the skateboard will face outward to better protect the walls. Easy installation, after installing the bottom bracket, it can be tested and adjusted…
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
The original Cover for the LoveBoard on the right side of the printhead does not fir very good and is only fastened with one screw. Sometimes, wenn the Cover shows a cap to the side of the X-Cariagge, the test of the X-Axis fails because…
SUP pump hose adapter to connect your existing hose to a low pressure air pump. While these won't inflate the SUP to the required pressure, it does get you 80% of the way there.
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Finger Skateboard If the tire does not roll well, adjust the Z-seam setting. (Orca Slicer recommended)
A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth). You will need 6 magnets and have to print the model twice. Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max…
Ein einfacher Schlüsselanhänger, 6cm x 2.5cm groß
This is a 12 cm long by 3.5 cm wide mini skateboard, designed for easy 3D printing and fun finger use. The top features a clean hexagon grip pattern for extra grip. The model is print-in-place, meaning there’s no assembly needed — just…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet…
If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw…
Organization tool for whiteboard markers and eraser. It fits 12 Expo dry erase markers. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: .2 Infill: 10% Notes: Supports recommended…
I think the name says it all; this is a kiteboard fin based on the Liquid Force 'GTS 2.0' model (so if you have a board that fits these you can use this 3D printed version no problems). This is not just a test piece, but I now use these…
Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…
Most stencils I found were made for post-its or pocket notebooks and didn't work for my whiteboard. The board I have came with large tipped markers so I needed something bigger than what was out there. It has three checkboxes and lines,…
Holds skateboard on wall Print without top or bottom layer and cool infill for the nice pattern like in the pictures. I find that good double sided tape holds better than small nails but both possible. Mine have been hanging there for 5…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
Here you can find a suitable skateboard for the "ETP-Robot" Action-Figure. The skateboard is also easy to print and very stable even with PLA. The wheels can be rotated and the wheel carrier is fixed with printed screws. I would be very…
I paddled in the Huron River last summer and the water was low in spots - I removed the center fin but found that the stability with only the 2 side fins was poor. This reduces the height by about 60% from a standard 9-½" fin, but still…
OpenSCAD SUP Paddleboard Drink Holder - Somewhat parametric for basic dimensions
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
A 3D printable skateboard wheel. It has a stiff core, but it is able to absorb some bumbs. The 608 bearings can be pushed in simple. The core has an offset and is not supporting the full length of the wheel for more grip. It also has some…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
Summary This is a kneeboard that I designed for portable Ham Radio operations. It is 200mm x 140mm when closed and 200mm x 280mm open. It has slots to hold 1.5 inch elastic straps for securing to your leg as well as holes to accommodate…
Cinnamoroll on the roll, skateboarding.
kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength
A whiteboard marker holder designed to be narrow to mount vertically on the border of a whiteboard. Mount with four #6 wood screws.
Should print on FDM without support, I printed using automatic settings on my SLA and the output was spot on
You need to print out at least: Two rails of your choice Two bumpers Two footpads One tyre You also need Two 608 bearings - pull them out of an old fidget spinner (outer diameter: 22mm, inner diameter: 8mm, thickness: 7mm - or use the…
A magnetic holder for whiteboard markers, available in 2, 4, 6 and 8 marker design. Insert a pause when slicing to insert 10x5mm neodymium magnets.
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a…
Slides onto skateboard wheels to stop you from rolling away while practicing difficult tricks
Here a really cool Skull Hoody Boy sculpture on a skateboard. The colored picture is a picture of the original model file, vertex painted and rendered (with Blender). The picture in single color is to show how it can look if you do no…
The Wall Mount for Skateboards is a practical and stylish solution for securely storing and displaying skateboards. This innovative mount consists of two parts: one part attaches to the skateboard, while the other is mounted on the wall.…
BOM: 3x M3 Ruthex threaded inserts or similar 3x M3x8 Screws 2x 608 Bearing Edit v2: Since so many have commented it, i added another Ruthex and Screw at the Bottom
![[WIP] Skateboard Feet for Mini13 Jointed Figure](https://media.printables.com/media/prints/1159869/images/8752901_3c721bdb-acaf-4f79-88c3-d27d4d284780_66326204-39b6-42c4-b206-0c263737175f/screenshot-2025-01-23-195040.png)
