1574 modeli
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paddleboard (sup) fin. Designed as a spare fin in case of forgetting original fin at home. Compatible with US-Box attachment system secured by screw or by quick-click rubber pin. Recommended print from PETG with 100% infill / note that…
Wydruk około 9,63 €–11,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hook that attaches to the handle of the bag to carry your skateboard on your back. The model is designed for an Eastpak floid bag but adapts well to other bags. I suggest printing the part vertically to optimize resistance to layer…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.
Wydruk około 6,15 €–7,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfacher Marker Halter für ein Whiteboard oder für eine Magnetwand. Passend für alle Marker mit max. 18 mm Durchmesser. Das Ganze ist mit 5x1 mm Magneten befestigt. Magneten:…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
Print with at least 5 perimeters and 50% infill (Gyroid) in PETG or PLA+ for a strong print. Attach with M4 screws and appropriate hardware. I designed these with the proposed standard by Offset Skate Supply (Link and technical PDF…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A quick remix of @SoloTSi97's excellent FireBoard 2 Minimalist Case, with hood and small internal mangets. I sometimes run long cooks and although the FireBoard 2 is “weather resistant," I wanted to add a hood to keep rain and direct sun…
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
I had two screws in the wall that didn't quite lineup for the whiteboard I wanted to mount so I made this adapter. I was going to glue it to the whiteboard but I didn't need to. I just tightened the screws to the adaptor and then hung the…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
My Kludd hardware started chipping after many years of use, so I mocked up and printed an exact duplicate for the original Ikea Kludd hardware. I recommend printing this with PLA+ or better, and using the 0.20mm Strength option in Prusa…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
The rounded skid plate is 12,9 cm wide and block-shaped part is 15,2 cm wide in these files. I made these for my 7.3 inch deck. But I think you could mod the STL files to fit other sizes and shapes, too… I have printed these using 100%…
Wydruk około 4,53 €–5,54 € nettoWstępna wycena jednego wariantu
I wanted a way to organize my SOTA/POTA activation and to keep things from falling in the snow/mud. I saw a similar design being used on youtube and I made my own version.
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple clip to hang expo markers. The print can be paused at the halfway point to insert a 0.315" diameter x 0.118" height magnet for a seamless look. Magnets:…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Dobrý den, představuji vám svůj návrh příborníku, který je navržen pro tiskárnu PrusaMini+. Příborník je rozdělen na 3 části, které je třeba slepit. Pro lepší lepení jsou v návrhu udělané čepy. Rozměry finálního příborníku délka 37 cm a…
Wydruk około 6,60 €–8,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
Wee Man Skateboarding on a Build Your Own Tek Deck - This is disturbing !! - sorry this sucks. Edit (8/25/2023) - This still sucks.…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena jednego wariantu
A Parametric barrier and bug trap - works on all kinds of crawling bugs including bedbugs and silverfish CURRENTLY stl are for 2" tape My building has had bug problems on and off and the best way to not become a statistic was to put Down…
Wydruk około 8,64 €–10,56 € nettoWstępna wycena jednego wariantu
A nice hanger for a bag with a wide load distribution in order to be gentle to the bags carrying loop. Includes Fusion 3d file so the parameters for the hook and the loop holder can be modified for your sideboard and bag. Made with one…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Simple magnetic holders for the slim style (Expo or other brands with a similar style) dry erase pens. The magnet is inserted into the print with a print pause at the appropriate layer. Required Non-Printable Parts: 1x – 12.7 x 3.2mm disc…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whiteboard-Marker-Holder Diese Halterung ist für Whiteboard Marker die ich auf Pollin fand: https://www.pollin.de/p/whiteboard-stifte-890317. Es gehen auch andere Stifte mit einem Durchmesser von 21mm. Für die Befestigung nahm ich…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
Remix from https://www.printables.com/model/431518-magnetic-holder-for-steadtler-whiteboard-markers to fit my 8x3mm magnets. Remixed in PrusaSlicer, original design by @Lennnard
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Een eenvoudig petanque scorebord met 3 rijen en 3 pluggen. Zo kan je met 3 apart spelen. De pluggen hangen vast met een touwtje en een druppel secondelijm. Aan de bovenkant en onderkant is de vullen 80% om een bevestiging aan vast te…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This model holds 5 whiteboard markers tightly together, handy to keep them in your backpack or tidy on a desk. Quick to print in just 19 minutes, with a 0.6mm nozzle and my FAST DRAFT profile (attached).
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Designed to hold the radio on the right side and the battery below it. I held them both together with my wife's hairtie. Then the left side has three versions depending on what size notecard you want to use or to hold your phone. The…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall hook for adhesive mounting whiteboards
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extension for the sideboard in the drawer
Wydruk około 4,58 €–5,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Once printed, insert the hook inside the metal slot on the back of the whiteboard (2 hangers used minimum is recommended), and twist to lock it in place. You may use a self-adhesive Command double-sided strips to secure the back to the…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
I use mine on a whiteboard, but but maybe you need it your kitchen? The added plate on top is for text (easely added via your slicer program of choice. Press in four 6x3 mm magnets in the back of the holder. It's a tight fit, but it…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
This is a loveboard cover for the Prusa MK4. I have a MMU and realized that everything else has a lot of color, and the printhead needed a little more! I didn't add much to the model, only the text and the coloring - it requires no…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Wanted to protect my shoelaces from the grip tape of my skateboard. Printed in PETG to be strong and slightly flexible. Slide the shoelace saver along the lace while guiding the lace inside to attach easier.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist eine einfache Halterung, mit der sich das Kabel einer LED-Lichtleiste entlang einer Fußleiste verlegen lässt. Das zweiadrige Kabel ist 1,8 mm hoch und 3,7 mm breit und lässt sich einfach befestigen. Durch die Lasche kann die…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are also looking for a Dry Eraser & Pen Holder, check here: Print Recommendations: Print on a flat bed surface, with text facing the bed to facilitate erasing. Scoring in 501 (the most common game) Basic rules Both players start at…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
The model was part of an architectural model. It is a section of the upper floor of the ‘Rose Seidler House’. If anyone is interested in other parts of the model that I haven’t uploaded yet, please feel free to get in touch. It was…
Wydruk około 1,84 €–2,24 € nettoWstępna wycena jednego wariantu
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Skateboard for DUMMY 13. Now your dummy can shred like the ripper it is, right up until it faceplants. Seriously though, this is a non-functional skateboard best used for posing ground or air tricks using the Lucky 13 display stand. There…
Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…
I use PET with 15% infill. Supports on rails only.
added a v2 with thicker keychain loop
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a fully functional Fingerboard I made. Use glue to attach the trucks and wheels. Make sure you upload your makes. If you like this model, you know what to do... hit that like button! Make sure to follow us so you get notified when…
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
Wall mounted holder for Skateboard / Longboard. Total width: 25 cm Two versions for different wheel diameters: 70 mm and 80 mm Update: As requested, I uploaded version without the screw holes. Happy Printing! Print instructions Print…
Similar to other designs but designed to print without supports. The only hardware required is two skateboard bearings. The mount and spool holder are designed to snap in place ( see image for more details). A long and short variation are…
Skateboard Wall Mount Halter If you like it --> press like it :-) Wheel Diameter up to 60mm width for wheels 35mm Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: tree 40 degrees only on bed Resolution: 0.2 Infill: 100 %…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
Easy to print Skateboard you can play with on your tabletop or other places. It flips jumps and drives nice and is very durable. Perfect for all age groups :) Prusa edition: It has the Prusa name engraved :) You will not need any glue due…
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Support needed, infill 15%, no brim, no rafts.
This is a bracket to hang skateboard decks on the wall as a decoration. There are two holes to dowel the bracket to the wall and four to attach the deck. Print on the head as shown in the picture. On the top is a slot for led strips in…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a model of 6008ZZ Bearing, that is used to test fit sizes in Fusion 360. It is non functional, however offers dimensional correctness for use in designs. Category: Robotics
Strong model to firmly secure your skateboard to the wall for easy display The wheels of the skateboard will face outward to better protect the walls. Easy installation, after installing the bottom bracket, it can be tested and adjusted…
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
The original Cover for the LoveBoard on the right side of the printhead does not fir very good and is only fastened with one screw. Sometimes, wenn the Cover shows a cap to the side of the X-Cariagge, the test of the X-Axis fails because…
SUP pump hose adapter to connect your existing hose to a low pressure air pump. While these won't inflate the SUP to the required pressure, it does get you 80% of the way there.
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Finger Skateboard If the tire does not roll well, adjust the Z-seam setting. (Orca Slicer recommended)
A simple whiteboard marker holder for four markers with recesses for small magnets (10mm diameter, 2mm depth). You will need 6 magnets and have to print the model twice. Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max…
Ein einfacher Schlüsselanhänger, 6cm x 2.5cm groß
This is a 12 cm long by 3.5 cm wide mini skateboard, designed for easy 3D printing and fun finger use. The top features a clean hexagon grip pattern for extra grip. The model is print-in-place, meaning there’s no assembly needed — just…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet…
If you print a Rocker hook then the second hook must be mirrored. Resolution: 0.2 mm Wall loops: 5° hook 5-loops / 30° hook 10-loops Infill: 5° hook 20% / 30° hook ~40% but more is better Material: PLA , PETG Supports: No Brim No Screw…
Organization tool for whiteboard markers and eraser. It fits 12 Expo dry erase markers. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: .2 Infill: 10% Notes: Supports recommended…
I think the name says it all; this is a kiteboard fin based on the Liquid Force 'GTS 2.0' model (so if you have a board that fits these you can use this 3D printed version no problems). This is not just a test piece, but I now use these…
Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…
Most stencils I found were made for post-its or pocket notebooks and didn't work for my whiteboard. The board I have came with large tipped markers so I needed something bigger than what was out there. It has three checkboxes and lines,…
Holds skateboard on wall Print without top or bottom layer and cool infill for the nice pattern like in the pictures. I find that good double sided tape holds better than small nails but both possible. Mine have been hanging there for 5…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
Here you can find a suitable skateboard for the "ETP-Robot" Action-Figure. The skateboard is also easy to print and very stable even with PLA. The wheels can be rotated and the wheel carrier is fixed with printed screws. I would be very…
I paddled in the Huron River last summer and the water was low in spots - I removed the center fin but found that the stability with only the 2 side fins was poor. This reduces the height by about 60% from a standard 9-½" fin, but still…
OpenSCAD SUP Paddleboard Drink Holder - Somewhat parametric for basic dimensions
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
A 3D printable skateboard wheel. It has a stiff core, but it is able to absorb some bumbs. The 608 bearings can be pushed in simple. The core has an offset and is not supporting the full length of the wheel for more grip. It also has some…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
Summary This is a kneeboard that I designed for portable Ham Radio operations. It is 200mm x 140mm when closed and 200mm x 280mm open. It has slots to hold 1.5 inch elastic straps for securing to your leg as well as holes to accommodate…
Cinnamoroll on the roll, skateboarding.
kiteboard handle 2 versions holes 205mm and 170 mm (depending of the brand you got) recommend atleast 1mm thick walls and infill atleast 40% 0.2 layer 0.4 nozzle Print on it its side for the best strength
A whiteboard marker holder designed to be narrow to mount vertically on the border of a whiteboard. Mount with four #6 wood screws.
Should print on FDM without support, I printed using automatic settings on my SLA and the output was spot on
You need to print out at least: Two rails of your choice Two bumpers Two footpads One tyre You also need Two 608 bearings - pull them out of an old fidget spinner (outer diameter: 22mm, inner diameter: 8mm, thickness: 7mm - or use the…
A magnetic holder for whiteboard markers, available in 2, 4, 6 and 8 marker design. Insert a pause when slicing to insert 10x5mm neodymium magnets.
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
Slides onto skateboard wheels to stop you from rolling away while practicing difficult tricks
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a…
