2,503 models
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
Here you go a new design if you dont want to buy a garden hose nozzle, quick 3D print with only 47min. Increase the preasure water Cheap Quick Print that takes 47min Note: Please put a hose seal to prevent leaks in the threads section.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Another jibbitz for crocs. Red and White PLA with MMU3. .15mm/layer, 100% infill with ironing, organic supports. Thanks to @Wprints_1300898 for the STLs. P.S. I used transparent red - really makes it pop. :-)
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Description The fractional clock is an educational model that combines fractions with the concept of time. The idea is that each section of the clock represents a fraction of the hour (e.g., 1/2, 1/4, 1/6, etc.), and these different…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
🌎 📐 Educational Model 🔍📊 At MiniWorld3D , education is one of our primary goals. In addition to actual Lessons published for Educators , here is this free and collaborative project for anyone to enjoy. Our regular models are also used by…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
OpenScad files available to customize the Letters or entire words.
Print approx. €7.82–€9.56 excl. taxPreliminary estimate for PETGSource material: PET
Two versions in English and two versions in Czech language. Dvě verze v angličtině i češtině.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Something to think about PS: Thanks to blechbude for the suggestion to make it into a key chain.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Something to think about
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant
Minor Update - 14 Feb 2025: 3DBenchy model restored to the package now that it is in the public domain . Major Update - 21 Jan 2025: The Modular Wind Tunnel for STEM Education and its accessories are now FREE and published under a license…
Overview This is a complete rework of my functional escalator model from 2022. It is a ground-up redesign incorporating a bunch of significant changes, including the following: Chain links now sit directly against the escalator steps.…
This is a modular system with which many kinematic chains, aka robot arms, can be constructed. The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings advantages and disadvantages…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples series on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples]…
Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
Well, I did it again. What began as a simple remix turned into a week-long project. Long story short I was trying to do a relatively simple remix but ran into issues with some oddities in the original model (example: a 10μm triangular cut…
Scroll Down for Assembly Instructions Purpose This set of models is the result of testing to help reduce VFA (Vertical Fine Artifacts) coming from the misalignment of the Y axis belt on the MK4. As originally designed, many of the parts…
🇪🇸 Welcome to Roman Hispania! Legado3D is an archaeologist that does digital preservation of historical legacy, and they are taking us back in time to the Roman Empire with this model! The Aqueduct of Segovi a (Spanish: Acueducto de…
A sexy one line wall art. Easy to print and attachable with a nail. You can also buy this product on my Etsy-Store: emberwork.de
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] This model…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This model…
Learn through play! 🧮 These Number Blocks make math fun and tangible for kids. Perfect for preschool, elementary classrooms, or homeschooling activities. ✨ Features 🔢 Teaches counting, addition, subtraction , and number recognition 🧠…
Its here, Version 2 of the cycloidal reducer! All the hardware is the same from the original version, however every printed part has been redesigned! Here are the current improvements over the original: It is now easier to print and…
Educational Number and Shape Puzzle Introduce your children to the world of numbers and shapes with our Educational Number and Shape Puzzle! This engaging toy helps kids learn numbers by associating them with corresponding shapes. Each…
This highly detailed bust of Medusa the Warrior blends ancient myth with fierce fantasy. Her iconic serpent hair and powerful armor make her a true showstopper for any collector or tabletop display. A unique piece for mythology fans and…
Design Concept The Scarlet model embodies elegance combined with a hint of mystery. Her flowing attire and subtle pose enhance the character's captivating aura, perfect for those seeking a distinguished piece for their collection. Purpose…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
These are specifically sized to fit IKEA's succulent plants, but they should be very easily resized in either a slicer or 3D application. Modeled procedurally using Houdini, they're inspired by plant roots and poison ivy. I have modeled…
Check out version 2 here ! At the moment (6/7/24) it is still in beta, but version 2 is still better in almost every possible way! Reduction specs: 64/1 reduction. NEMA 17 mounting. BOM: 4x M3x25 cap head bolts 2x 10x15x4 bearings 1x…
Like my 12:1 speed reducer for TT type motors this is a 21:1 ration version. Simple to print and compact in size. Great for sequencing.The video is here. https://youtu.be/WvyS8wwAOy0 The video for the 12:1 ration unit is here.…
Honeycomb Storage Wall Inserts; Slightly more refined versions of M4 and Multipos with alternate tab versions. 6 tabs for max holding power, 3 tabs for moderate holding power and 0 tabs for primarily test location finding before locking…
This model repurposes the parts from the rather large Prusa Buddy 3D Camera, into a much smaller package more suitable for a 3D printer. The printed enclosure consists of 3 parts that snaps together, and no screws are needed. As this are…
Description I couldn't find a free reduction gearbox design for a Nema 17 stepper - so I made one myself! My design only requires 2 608 skateboard bearings and a bunch of m3 screws. The drive works with the cycloidal reduction principle…
just a simple reducer from 25mm to 20mm for electrical PVC Conduit, printed in PeTG 60mm/s no supports fast simple. just print it! its quick :)
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
This is a tiny cycloidal drive designed to fit a NEMA17 stepper motor Reduction: 19:1 The cycloidal ring has been designed to be interchangeable, so if you want to fit a higher/lower ratio cycloidal setup, you only have to print the disk…
I was missing a few parts for the hotend model by Agustin. So I made a screw for the heater, a setscrew for the thermistor. And a cut away version of the ptfe liner. I also uploaded a stand that I made for it. Do keep in mind that the…
Bambu Lab - Faster Start - reduce waiting time | G-code trick Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 80mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
This is a cycloidal drive with a 0.3 mm eccentric shaft and 2 wheels to cancel out the vibrations caused by eccentricity in the shaft. The reduction ratio is 1 to 80 .
Reduced diameter of head as well as ratcheting surfaces to allow it to fit a slightly smaller syringe inner diameter.
Ontos trigger with holes to match the blaster aesthetic, added +2mm to remove the trigger play/slop from the original design, slightly rounded the face for comfort. 2/22/2026 - Added +2mm length to remove slop, added a no hole version of…
I loved the original design from RANIBIZUMAB but I got annoyed by the model not being completely placed on the axis, so here isa remix with fusion360 files. I also did a redux that is curved for some more soil space. Category: Outdoor &…
Print all parts. Use provided images for appropriate colors, color changes, and assembly. No special printing instructions, use standard settings. All parts should be oriented so no supports are needed. Suggested colors and any specific…
1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports) No Supports required. Used to couple and reduce 1.5" to 1.25" pipes or tubes. 3 Inches of clamp space on each side of the adapter.
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
I made a flow reducer for the AquaClear 20 hang on back filter. The aim was to make my Bettas new home more comfortable. ---------- V2 ---------- V2: better surface circulation - less circulation in tank Please leave a Like or a Make!
This interactive 3D-printed maze is designed for therapy and skill development, particularly for children and individuals with visual impairments. The goal is to move pegs through the maze to reach the finish. Pegs can be moved by hand…
A small 12 too 1 RPM reducer for use with a TT gear motor. Small inline speed reducer. Youtube video of function and build can be seen here. https://youtu.be/01v10qvjFIA Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Saw the original, liked it and printed it for my son cos this is right up his street. The thinner “front” edge on the big hole started peeling a bit off bed though, so it got a bit messy and needed some sanding and tidying to get rid of…
NASTIER (Network-Attached Storage; Tiny; Inexpensive; Easy; Redundant) A ZimaBlade-based micro NAS with redundant Raid 1 storage and full server capabilities. Full instructions on my website here:…
This naughty little Valentines bear is ready and roaring to go this Valentines day. Why not show the special person in your life that this Valentines isnt just about love.. its about getting it on ;) Hope you enjoy!
These are educational models of crystalline metal nanoparticles of 1 - 8 nm in size (clusters of ~500-9000 atoms) in "flavors" Gold (Au) and Silver (Ag). They can be used to explain how surface energy of different crystallographic facets…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Redukce z 32mm hadice na 5x16 pro druhý okruh nafukovací vířivky, určený k lepší filtraci a ohřevu. Tisk na spodní straně (jeden kruh) s límcem, min. 4 perimetry, náhodný šev. Výfuky lze tisknout bez podpor. Materiál ideálně ASA, použít…
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
This is a simple mixing eductor that one can use for in-tank mixing applications. The spars are a bit weak due to the thin walls but it's functional. Instructions Print at 100% infill with zero shells. Adjust the size to fit your piping.…
GIOCO EDUCATIVO CERCHI Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Leviton supplies a set of rubber grommets to compliment their metal structured wiring media center. Unfortunately, they do not supply a medium size grommet for the medium sized knock-out. This threaded hole reducer fits through the medium…
jde jen o redukce v napojovem drzaku drzak mam u me v modelech také
PLA/PETG 0.2mm layer 15-20% infill Support
This is an airfoil that i designed using Shapr3d cad, is an airfoil complete with a fixed slat and a muvable flap, everithing print in place. This project is meant for theoretical use and to explain the use and the working principles of…
I created this specifically for the current Education Tools contest. One of the example projects there is a model of a biological cell and that inspired me. This is also a model of a cell, but of a different kind. At a scale of 1:25, it…
UPDATE 2025-06-07: I noticed that some filament spools (Overture, etc.) have an open and ribbed ring around the center hole. I added a spacer that has two touch points to accommodate these types of spools. This is a very simple, quick…
I made this to work with https://www.thingiverse.com/thing:3801954 I use it for my Creality Falcon Laser Engraver vent
Unlock hands-on fraction learning with these fully parametric 3D printable fraction blocks! Designed in OnShape , this versatile set allows for endless customization, making it perfect for educators, parents, and anyone looking for an…
Had to print this nipple because it was difficult for me to find those parts for my RO water filter nearby. This printed piece definitely saved my weekend project. Tested at 3 bar (~45 psi) water system and working like a charm. You must…
Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…
The hexagonal plug at the back means it takes up less space on the wall. Yeah a tiny amount :-) but every bit helps for my limited space. *Important Note:* Theres potentially a lot of retraction on the small circles so if you have your…
Check the file here: https://a360.co/4fuqKD3
The art of gears and the brilliance of machinery! 💡 As a gearbox reducer, it reduces speed and increases torque, merging precision design with raw power. 🚀 GearGrind，工業設計的典範，作為一個減速齒輪箱（Gearbox Reducer），它通過精密的齒輪和結構呈現機械的力量與智慧。 Category:…
Full Image Catalog The complete gallery of my works can be found at Portfolio . You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Medusa model reimagines the iconic Gorgon from…
Procedural Chess Sets, Designed in Haskell with Waterfall-CAD . Write-up on my Blog Source Code on Github Units are in cm ; this is a poor choice, and you're almost certainly going to need to scale the generated stl files by a factor of…
The Educational Balance Scale is an educational toy for kids to help them understand numbers and their significance. The number blocks and stars are proportionally weighted: Block 5 equals Block 2 + Block 3, or 5 stars. In addition, the…
A thoughtfully designed collection of hands-on teaching materials to support geometry instruction in primary school (elementary level). Ideal for classroom use or structured learning at home. 🧑🏫✏ This set includes four core geometric…
This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Print instructions Category: Machine Tools Summary This is for stiffening the X-Axis of your X-Carve (2015-to early 2017 models). Per pair, you need: m3 x…
GIOCO EDUCATIVO 1 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
It fits into a tap inside fermentor. Place the inlet facing upwards will let yeast sediment stay wile you transfer cleaner beer.
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
I made the back of the guitar completely solid. This uses less filament than his version with the supports. I got away with 4 walls and 15% infill at .28 layer height to cut the time down. You can use the center piece from the other remix…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
needed a reducer for a cooker hood duct v2 added better version Category: Kitchen & Dining
So funny enough my dad somehow also misplaced the drip/grease tray for their Foreman Grill. Rendering the grill unusable since without the tray grease drips onto the counter. Needed my tray to be 12 ¼'' long and could just barely make…
redukce okapového svodu na flexi hadici
Tamponi in TPU per cancellare il rumore dal portellone posteriore derivato dalle vibrazioni della cappelliera Per mesi sono impazzito a cercare l'origine di una fastidiosa vibrazione che arrivava dal posteriore, casualmente ho viaggiato…
Filter reduction for inflatable hot tub
This uses a filament roll as the main pulley in a snatch block model. Great for classroom demonstration for S.T.E.M. Not load bearing!
Someone I know had a Powertec 4" to 2 1/2" reducer that was too small to fit in their Rockler Dust Right Quick Change handle. Both are "4 inches" but there is a roughly 7mm difference in I.D. and O.D. of the two products. It should be…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
Instructions: The following text provide the basic instructions how to make the haptic design from a diagram or picture. Get the required graphic. In our case we used graphic from Gambian secondary school book. Convert the image in to svg…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
I like my cologne to be more subtle, and a single spray was still a bit much for me. This ring fits under the nozzle and blocks it from fully depressing. The nozzle should pull off easily, and you can slip the ring into the space under…
Redukce na fixu pro iRobot Root umožní použít běžné fixy pro kresbu robotem.
![1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports)](https://media.printables.com/media/prints/467707/images/3833779_84360414-c412-4bb7-8416-d7704ab80c4f/f360.png)
