2,217 models
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Print approx. €7.24–€8.85 excl. taxPreliminary estimate for one variant
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Extended Stability Feet to connect 2 Prusa Steel Sheet Holder and / or Prusa MINI Steel Sheet Holder based on Angelo's model
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
This mod for the Orignal Prusa Enclosure adds a second spool holder under the normal one. The original idea was just a mirror of the stock holder, but this places the spool quite low which makes loading difficult. This design is extended…
Print approx. €5.99–€7.32 excl. taxPreliminary estimate for PETGSource material: PET
Remix of smysnk 's toe kick clip, modified to fit the metal CAPITA legs. Following the advice of some YouTuber, I used the metal CAPITA legs instead of the standard plastic SEKTION legs. The metal legs are very sturdy and great, but the…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Extended baseplate for Makita Router with Copy Ring, it give you more stability and you can use with template. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this…
When securing cupboards to the wall, IKEA provide some adjustment but it can help to have more options when the wall line is not parallel. Fortunately I found a model already designed by @MotorboatMe_237913 so just needed to modify the…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I extended Volker_Ps hot glue gun stand by 60mm to add a little drip tray. I guess it should be long enough to fit different hot glue guns (please see the pictures to get an idea).
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
A simple filament roll/spool holder printed with no supports required. Allows up to 90mm rolls to hang off the back. Items used; 3D Printed Filament Holder 2 x M3x10mm screws 4mm PTFE tube Print and slide in the PTFE tube from the back to…
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
We use the cheap Tapo C200 camera to supervise the sleep of our baby. It has good IR capabilities and can be turned around. As I didn't want this to make a permanent installation, I created this arm to mount the Tapo mounting plate on a…
Stokke sells for their Tripp Trapp high chair Extended Gliders for more stability. They are recommended by Stokke when using the Baby and Newborn Sets and are also helpful to prevent the chair from tripping over backwards when the child…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Modification of TaylorsMake's end mill tray (from TV) to hold bare US standard 3/8" shank x 3.25" long double-end mills. The mods are: Higher density single-row layout holding 18 tools without the individual plastic cases Thicker…
Print approx. €4.23–€5.18 excl. taxPreliminary estimate for one variant
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to extend the “additional feet” and chimney for the printer-box spool tank to allow more room between the Spool Tank and MMU. The filament has a smooth run between the Tank and MMU. The original model can be found on the…
Print approx. €16.78–€20.51 excl. taxPreliminary estimate for PETGSource material: PET
I remixed this model from the excellent design by Kai. I have included the hooks from the Thingiverse design by CSD_Salzburg for convenience. I like the design and used it for some time, but I needed something that could fit a bigger…
Print approx. €5.06–€6.19 excl. taxPreliminary estimate for one variant
Log housing for use with geocaching. See attached “Log housing for 35mm film canister how-to.pdf” for details.
extended the length of the original design by ~35mm, and added some more rounding and smoothening
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
My first undershelf drawer is so useful to me I decided to make an expanded modular version for bigger needs. This is it: Depending on available space, you can "stack downward" several drawers. Of course you need to be careful about the…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+. It can be configured in multiple ways: Allow the install of a USB…
Print approx. €5.64–€6.90 excl. taxPreliminary estimate for PETGSource material: PET
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I assembled the RP2040 ( SKU 1030018) with the additional header pins - this remix is to allow fitment of the board with extended headers. My application is more likely to get wet, so I opted to close off the light pipes. Recommended…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
Raccord IKEA Jerker pour réhausse Ceci est le raccord pour fixer la réhausse du bureau IKEA Jerker (j'ai un V1, mais cela doit aussi fonctionner pour sur les montants d'un V2). Quand on dispose de l'option réhausse (qui se monte au-dessus…
I am using this with Home Depot's Vissani 8.8 cubic foot chest freezer, and 2 of Walmart's mainstay lasagna trays. The freezer measures 17.5" across the top and the tray measures about 16", so the supports are designed to take up about…
Print approx. €6.06–€7.40 excl. taxPreliminary estimate for one variant
I was using Jose M Cádiz's Light mount until I added my mmu3 and the light would get in the way of the PTFE tube and mmu itself I have extended the light out past the mmu and ptfe so it is now centered on the bed when it is in its forward…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This handle extension allows for an upright posture while pulling the compressor behind you. The handle was printed with PETG and consists of four parts that are joined together using M4 screws and nuts.
Print approx. €14.30–€17.48 excl. taxPreliminary estimate for PETGSource material: PET
Under Cabinet Speaker Mounts Specifically fits the PreSonus Eris E3.5. Under Cabinet Speaker Mounts - Designed to suspend speakers with straps or hook & loop fasteners for vibration isolation. The model is designed in two interlocking…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. In Cura or PrusaSlicer you need to select Print Thin…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long. You need to print 2 copies of the…
The super adorable Axolotl just got a cosmetic upgrade! This one is truly gorgeous! :) This is a remix of the high res version of the articulated axolotl. Big shout out to AKinferno for his hard work making this! 3mf provided. Holes for…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
This artistic desktop ornament features a floating skull within, thanks to the ingenious use of bridges enabled by 3D printing technology. For optimal results, it is recommended to print the piece with a layer height of 0.2 mm and with…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
Happy Halloween Skull suspended - PLA orange neon transparent two perimeters layer height 0,25 infill 15% no brim no support thin wallas activate monochrome or multicolor file For print FDM
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
UPDATE Featured on the @Prusa Blog: Prusament PLA ColorMix feature https://blog.prusa3d.com/prusament-pla-colormix-print-45-color-shades-using-just-five-filament-spools-and-more_137835/ Added .gcode and .3mf files for ColorMix. Thanks,…
This is a remix of “Laptop Stand” by finke. I really liked the original model, but added 15" computer support and some nice to haves like a stand version with no lip so you can close the computer and an optional connector for…
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
This is an STL printed laying down at low layer heights with different colored filaments with the goal of blending the filament colors to make both a multi-color and exaggerated depth image much like a cameo or bas relief. The file will…
After the success of my Suspended Hand model, some people asked me to create one with a Black widow. It's finally here, ready for Halloween !!! Same as the Suspended hand, you need to print it with wall generator in Arachne for Bambu…
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…
Thank you Paul for the design!
A print-in-place suspended betta. The cover photo was printed using 0.16mm layer height in Silk PLA. Files include a version with all the strings and a version with only the support strings so that nothing is blocking the betta. Also…
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
An extended magazine I created for the Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy by Rectangle. You can print standing on its bottom and no supports are necessary. I've created multiple other accessories for this model, you…
Are you unsure what to give your friends or family as a gift? No problem! Nothing is more beautiful and scenic than this wine stand! If you want to make the print even more unique, add the name or logo through Bambu Studio! Tested with…
After a hard day of playing, your dolls need to relax. Are they tired of the same old couch or faulty recliner? The solution is here! Now your dolls can enjoy paradise in a seat so comfortable, it will feel like they’re floating. For best…
The Design I've remixed the amazing suspended hand by taking the suspended filaments and giving them a twist, literally! It changes the affect from an obscured hand in mist, to a hand reaching out from a vortex. This looks great and shows…
This is a battery cover for the PSP 2000/3000 series that enables batteries to fit from the 1000 Series. Easy Print, just have to use a .16 or .08 setting.
JERRARI3D.com The GEN2 Gridfinity Drawers V2 design combines the best of both the GEN2 Storage System and the Gridfinity system by Zack Freedman . The V2 is a reimagination of the original as a drawer more than a tray, this allows for…
Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…
Open-ended bins for gridfinity system. Pair two to create much larger bins that can be made on smaller printers. Screw hole removed from underside to enable faster support-free printing. Reinforcement added at open edge to stiffen bin…
Couldn't get the orginal (https://www.thingiverse.com/thing:3336214) to fit on any available feet. Remixed it to fit these feet (https://www.prusaprinters.org/prints/120019-tripp-trappr-stokke-back-feet)
The hearts of two lovers are entwined, and this 3D model is a testament to the profound bond they share. It's the perfect gift for Valentine's Day! Important: Use Arachne perimeter generator 🎁 Want to see more amazing models like this…
Hook part extended by 5mm on both mounts. Category: Computer
Edit 02/21/2023: Added ver.4 & STEP files. Added holes for set screw (M3). Lost original ver.2 so named the updated one ver.2.1. Edit 03/17/2020: Added image with ver.3 Base plate/grip extension for 10 round MecGar 1911 magazines. I…
Extended Caulking Nozzle for getting to those hard to reach places!
This is a ghost or pumpkin face suspended in mid air giving it a creepy look, perfect for halloween! Files: Single STL 3MF for multicolor prints Print Settings: 0.2 Layer height Arachne Wall Generator
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
A Remix of Modular Filament Storage System that contains extended models! Extension nubs allowing for multiple rows without screws are a part of the updated wall mount brackets. The wall attachment full sized modules can also be used to…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
This is a remix of xanoy's phone holder. When I printed mine, I realized that my phone charger just barely fit. I just did a couple of quick plane cuts (split models) and copies in fusion 360. This keeps the same pattern as the original…
Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print
Today I bring you this awesome Charizard string art model 🔥 This Charizard break out of the frame, giving the impression that it's almost in motion! I hope you like it as much as I do! For a correct print, you must set 0.20mm layer…
I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer. The Bambu Long Drop…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
These extended front parts allow the can dispenser to work with 500ml Ø66mm cans. First upload was too wide. Removed 1cm. The parts should still (barely) fit on a prusa mini, and the 3mf file has all the modified front parts with infill…
Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…
Remix of Ratchet toothpaste tube squeezer by Luke's 3D. Everything is the same except for: It can now fit up to a 65mm wide tube Removed watermark Increased tolerance on axle so it fits better (may need a tiny bit of sanding)
Update 2021-05-17: Minor fixes to the foot and second segment. Adjusted the sizes of the low B/Bb holes for better tonality (the low B natural was formerly too sharp). Increased the height of the ridge for easier playability. This is an…
Extended lower and upper corners to fit Ender 3v2. Printed with PLA Print: 0,2 mm layer height, 0,4 mm nozzle, 40% infill. Supports only on the lower corners on the 90° overhang.
This is a custom base plate for an extended CZ Shadow 2 magazine. This baseplate can be used with picatinny rail attachments. My case was to attach Mantis, so it can be used together with a holster. Print it vertically with support (back…
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Need to store something long? Want to use gridfinity, but have a small printer? These open-ended segments use the gridfinity grid to connect end-to-end. Size goes up to 4x1 - small enough to print on a 210mm x 210mm printer (or smaller if…
Similar to Milwaukee 49-90-2037. Sized for the Fuel 2.5 gallon Packout Vac, but I imagine this would fit other Milwaukee vacs. Print standing up, no support. Use a ½" (OD) vinyl hose, will be tight to install but will fit.
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…
Suspended bio model of a Tardigrade also knowed as Water bear or Moss piglet . These microscopic organisms are renowned for their incredible resilience and ability to survive in extreme conditions. Print it 0.2 without supports. It fits…
Used with multiboard: https://www.multiboard.io Extended remix of https://www.printables.com/model/704739-dual-wire-cutterplier-holder-for-the-multiboard that has five slots. It slots into two octagonal holes for better stability.
The Azeron Cyborg is a highly customizable gaming keyboard that's largely 3D printed. All of the paddles are around 2mm thick, which is great for most of them. Actuating the knuckle paddles means I have to take my finger completely off of…
This is a variation on Sebastian650's excellent nose flute design. I used meshmixer to make the mouth of the flute narrower, which allows much higher notes to be played. Here's a table showing the range I can achieve with each model. The…
Extended camera arm links Available lengths (measured distance between mounting hole axis): 50 mm 75 mm 100 mm 125 mm 150 mm Print settings: Support needed (just like the original model) if printed standing upright. No support needed if…
This double ended coupler will allow you to make a mini green-house planter out of two standard mouthed mason jars. Designed for Ball and Golden Harvest regular mouth Jars, but works for many others. Place these two pieces together with…
BOM: Printed with ROSA3D High Speed PLA Gray This is an updated "Version 2" of my printable nut inserts, designed specifically for 40x40 T-slot aluminum extrusion profiles (standard 8mm or 10mm slot width depending on the manufacturer).…
Suspended Rose art I have included a single colour file and a two part set (rose and strings), I have also added my BambuLab 3mf. Print without supports at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne.
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
