269 models
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. By the way, there are several types of "Brezen”. This is the “bayerisch-schwäbische Brezel” You can find it in Schwaben, in the west of Bavaria…
For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…
The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…
Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
This is a further remix for noinfill. I printed it with 2walls only. Here you go the timelapse. Don't forget to subscribe my YouTube channel.
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…
A fully parameterised cable management tray / cable holder for mounting under a desk. Includes screw holes or you can attach it using double sided tape. 40 and 75mm wide versions included (both 100mm long) along with the 3mf file if you…
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…
This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…
Model Name : Robot Hero - Animal Crossing Serise Size : 190 mm Level : ★★★☆☆ Color Required : White, Black, Red, Yellow, Dark Gray, Silver, Cyan Designer : @Bread_Ryu 1) This model is based on an FDM 3D printer that must support TPU…
3d print a simple waterpump! This is a peristaltic waterpump with high pressure and low waterflow. I used it in a small automatic greenhouse where it connected to a spray nozzle. Hardware required: Yellow TT-motor (ideally low rpm and…
We revamped our Harry Potter Mirror of Erised, now its a beautiful picture frame that prints with no supports. Just in time for the holidays, hope you enjoy them as much as we have & all those we have already given them out to as gifts…
Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…
as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…
Hi! We are from Ukraine!!! This is a low cost periscope for the Ukrainian army by Ukraine, to help Ukrainian soldiers. If you can and want to help us to print models for this device, please contact me (agree on quantity/time/delivery)!!!…
A simple, low profile cover for a ceiling mounted HVAC register. Fusion 360 file (.f3d) provided so you can adjust parameters if required for your specific register. Model prints in two pieces if you only need one side; two pieces also…
BOM: Note: incomplete, haven't had time to check exact fastener lengths: Bearing Assembly (Non-Print in Place Version): 1x M3 bolt + nut 3x M4 bolts + nuts 3x Needle Roller Bearings (4mm Bore Dia, 8mm OD, 8mm Width) Other: Silicone Tubing…
Based on off_grid_craft's design ( https://www.thingiverse.com/thing:3445927 ). These motors are small and cheap and will stall if the pump is run too fast. Produces a very slow, precise and reliable flow rate. I have mine operated by an…
First of all, props to Lista optimized part trays von Marcel van der Boom which helped to inspire this Remix! The original model is a great solution for implementing a copy of the original trays sold for the Lista cabinets. I was missing…
Meet your new butterfly army. Print this guy out and then print some more (he'd appreciate a few friends), suspend them above your precious vegetables and they will protect them from the scourge of the evil caterpillar horde. Learn about…
Speaker Stand for Monitor Speakers The Problem: if Monitor Speakers sit flat on a tabletop, the sound is not directed towards the ears. My Solution: incline the speakers upwards so that they are pointing straight towards the head of the…
Це приблизна модель модуля передавача Emax Aeris 915 МГц. Це допоможе зрозуміти приблизні розміри і на їх основі змоделювати аксесуари для спільної роботи з цим модулем.
Was man zum Zusammenbauen benötigt: Silikonschlauch (2mm innen und 4mm außen minimal 10cm) 4x Schrauben m3x20 3x Schrauben m2x12 3x Kugellager (11x4x4) Nema 17 Schrittmotor Kabelbinder gedruckten Teile Zusammenbau: Das Teil namens “Main”…
This is the 3DVeristan Face Shield that Midsouth Makers is printing for local medical professionals. If a later version arrives we will update this repository after validating. If you are not working with Midsouth Makers, please don't…
This is an insert for the boardgame The Gallerist and based on the great design by tvkili! I used most of his base measurements and adapted the boxes to fit everything including the KS expansion stuff. The boxes also fit into the wells so…
0,2 mm, no supports, 3 perimeters for more rigidity. Don't forget to mirror STLs for opposite handle before print. Remove built-in supports from body_L and body_R. You need 2 pcs of mirror: 50x50 mm thickness 3 mm. For example:…
Hi! I've edited the original model to fit a bigger E5 version of Presonus speakers. There is also a smaller version if you want to. 0.20 Layer, 20% Infill, No supports, no brim,
Tested with PLA/PETG 0.4mm nozzle - use whatever works for your gridfinity prints. I've included a small range of sizes, anything else, open up the f3d file and edit the parameters nx and ny to change the grid.
Hook shaped boomerang with a certain Boomerang Fever vibe. Flies a nice big circle. The first one I made so far felt a little heavy and required a pretty hard throw, so I added a widened version. There is a considerable difference between…
A din rail mount for a Peristaltic Pump. The pump we used: https://a.co/d/fWMLnrs You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…
This is a parameterised (Fusion 360) small parts organisation box that can be customised to your needs and is based on the Assortment System Box by @chappel https://www.thingiverse.com/thing:4160638 I needed a flexible design that would…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
Retro Realistic Hobbies YouTube Channel https://www.youtube.com/@retrorealistichobbies I have been looking for a R2D2 Periscope lifting system that works for a while now and could never get any of the ones I have found to work correctly.…
This is a 3D scan of a Tawaret sculpture, I used plane cut for a flat base and oriented it upright. It's from the Harvard Museum of the Ancient Near East, more info: Faience Egypt (Thebes, tomb 34). Late Period, c. 664 - 332 BC Purchased…
Parts: printed parts (see .stl) 5x 608 bearing hose silicon hose Ø6/4mm | length: min. 1m recommended fixing elements 3x cylinder screw M4x25 2x cylinder screw M4x15 5x hexagon nut M4 4x M3x10 Printing: Material PLA Infill 25% infill…
NOTE: You will need a printer that can print at least 221mm in the X or Y direction to successfully make this insert. 2025-04-24 Update Another minor tweak, this time to player_box_x4.3mf / .stl , to make the pawn and meeple slots…
This 3D model is a custom-designed stand for the PreSonus Eris 3.5 speaker. It features an elevated structure that raises the speaker off the table, angling it for optimal sound projection and listener ergonomics. The stand also provides…
Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…
Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Laowa 24 Probe lens Periscope, Gcode with support and some reinforcement case. Close the Periscope with a 20mm long and 3mm screw, heat an insert at the opposit side. Edit, V2 with better design and adjusted the mirror surface.
Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 147mm deep, with a 40mm incline in the front and a small lip in the back to prevent the speaker from sliding. Cutouts in the version with holes are 25mm in diameter and…
This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…
This parameterisable system is still a work in progress. Print Settings Matrix Part Infill Perimeters Infill Pattern Front Plate 5 2 Insignificant Back Plate 5 2 Insignificant Mount Left* 15 4 3D Honeycomb Mount Right* 15 4 3D Honeycomb…
This was inspired by https://www.thingiverse.com/thing:1027744 This is designed for the mirror shown in the photo and available here: https://www.amazon.com/gp/product/B000RZQI68/ If you don't use this mirror, you may have to use a…
This updated periscope module for Chopper is required to use the Advanced Head arms.
I have fixed it, they have changed it like 3 times since i designed this, why they do this to me? I use this kind of glass cleaners. I did not like the box sitting on my table. It was ugly. So i designed a holder for it. RED one is PETG.…
https://www.buymeacoffee.com/maxt ---------------------- 4 versions in one package: Heart with no holes at all Heart including a hole to hang it, or scale it down and use as a pendant Heart including a place for the arrow Bonus: first 2…
I printed in PLA+ with 2 walls and 20% cubic infill and it seems plenty strong for these small lightweight speakers. It's also very slightly oversized front to back to allow felt pads in the front.
FREE version of my Peacemaker Shield models NOTE: free version have lower quality
Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego technic. I've been using it with 6mm silicone aquarium tubing to pump small amounts of citric acid into a baking soda…
This model is my first version of parameterised gears in fusion. Built as part of my parameterisation of my herringbone roller bearing. The model includes both a spur gear and rack. Both can be adjusted to suit any module (tooth size),…
The Concept I designed this stand because I wanted a clean way to display photos on my desk without the visual weight of a full frame. The goal was to mimic the look of bent lamination (bentwood), keeping the focus entirely on the image.…
Designed to point speakers at a 15 degree angle. Print 4, 2 per speaker, or 1 per speaker if you live life on the edge. Printed with all walls for a little extra rigidity. Added feet, not necessary, but I was testing out TPU.
A handle for raising and lowering Hunter-Douglas Applause LiteRise blinds. May work for other LiteRise blinds, I guess? I'm only really familiar with this particular set of blinds. This is one of the first models I ever designed, and as…
Full build details here Peristaltic pump with two flow channels, each of which capable of flowing up to 5 liters per minute, although recommended continuous flow rate closer to 2 liters per minute. Initially designed to be used with an…
I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and a hose 8 mm (inner diameter) / 10 mm (outer diameter). I printed the pump from PLA because its elements do not come…
My first attempt at a 'budget' dosing peristaltic pump, mixing some design concepts together from some previous, related designs. You can find more info on the design, and I will be continuing to add related designs, here. One of the main…
This Cherish Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké…
A simple double coat hook that clips over the top of a door. Door thickness, space at the top of the door, and offset of the top hook (to stick out past something hung on the bottom hook) are adjustable in Fusion360 Parameters. Default…
I liked the Meat Tenderiser designed by Vent357 but I felt it needed a bit more oomph :) So I remade the piece and added the ability to insert a different coloured barrel to make it pop! This is technically a remix (even though I built it…
Periscope corner body and mirror cover for 50 mm PCV pipe, mirror 74x52
This is a Gridfinity drill bit holder which can hold 5 drill bits in a 3x1 (2U height so they can stack) space. The .stl file is set up to hold five bits: 4mm wide x 48.5mm long bit 5mm wide x 60mm long bit 6mm wide x 73.6mm long bit 8mm…
I designed these for the PreSonus Eris 3.5 Studio Monitors, but they should work for any speaker. I included the Fusion360 file too, in case someone wants to modify for their own usage. Put some foam between the desk and the stand to…
Mattress Asterisk — because it’s fun to say! This is a purely aesthetic remix of Zack Freedman’s basic Asterisk Tile — now with an ultra-plush pillow top! Learn more about the free 3D printed board game Hextraction here . Print Settings…
A parameterised drill bit stand that can be mounted on a tool board. Features include with mounting holes to screw it to a tool board. with a label to print and stick on the front. that can be changed to hold your set of bits. that can be…
Generic solar LED garden lights are supplied with a plastic ground spike and a cylindrical pole which works, but puts then in conflict with lawn mowers and plant shadows. This is a simple openSCAD script with parameters to make it easy to…
Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Chaos 45 RPM Adapter - https://www.thingiverse.com/thing:2847311 Chaos 45 RPM Adapter Version 2 -…
A din rail mount for two Peristaltic pumps and a stepper motor to drive a mixing padel. The pump we used: https://a.co/d/fWMLnrs The stepper motor is a standard NEMA 17. You will need to print two tabs for this design. They can be found…
Simple Remix for the left handed people out there :)) Sorry for the poor imagery, but there it is. (top one is left for comparison)
Hey there tribe, i wanted to make a hand plane so I did. the blade is the DiResta Razor. -edit: sorry the nut was too big on the OD so i made a different one. nut v2. -edit 2: I made a v2 base with handles, figured I should add it. Here…
Either glue retainer pin into button face or use screw with pan head. The asterisk (/ˈæst(ə)rɪsk/ *), from Late Latin asteriscus, from Ancient Greek ἀστερίσκος, asteriskos, "little star", is a typographical symbol. It is used as “wild…
The Eristoff Ginger came with a beautiful low-poly shotglass in the shape of a wolf head. I really liked the design and decided to model it myself using Blender, so here's my copy as a printable 3d model. Notes: Use a support with…
I made this model years ago, it's a low poly model of the Sword called Ser-Veresta from the Anime “The Asterisk War”. In the picture i colored it, but i guess if you have an AMS you can also do a multi-color print. I drew some supports on…
Cherished Hatchling from Magic the Gathering My Fiancé was complaining about how I never model anything cute. I think Cherished Hatchling counts. If you want to help me keep making free models or want to tell me what I should make next…
Parts needed: 4x 36 mm or longer M6 bolts with hexagonal heads 4 wing nuts for the M6 bolts 1 drive bolt (M6). Should be longer than the others 4x 608-style bearings Silicone tubing ~5mm ID (or smaller ID) and 10mm OD. Assembly: Push the…
A custom-sized holder for a peristaltic pump, designed for mounting on a compatible pegboard (link provided). The holder features a slot for a 15EDGVC-3.5 connector, ensuring secure and organized integration with the pump. Made from…
Presonus Eris 3.5 V2 stand 30%infill reccomended
Modelo de sable berberisco en miniatura, ideal para hacer pendientes/aretes, imanes, pines o simplemente jugar. Escalable al gusto sin perder detalle
To get the colour contrast on the text you can add a pause / filament change on the layer where the text starts (about 1.08mm). Otherwise if you're playing warhammer you probably know how to paint.
Icaronycteris index is a member of the earliest known, now extinct, genus of bat. This is a lithophane of its holotype fossil in the form factor of a credit card (53.75 mm × 85.6 mm × 5.4 mm). You can customize the contrast of the…
Prussian Artillerist 1870-1871
Remix of Afruzu's version. The guide holder is shorter to better fit my enclosure. The edges of the spool roller are steeper as I had an issue with the spool climbing.
Basic periscope easy to assemble. I've been printing it with supports. You need mirrors for functionality I used some that I found in my local Rossmann. Also use glue gun for easier assembly.
El modelo consta de tres partes, un cuerpo con 4 piezas colapsables y dos tapas de diferentes tamaños, luego de imprimir el modelo hay que adicionarle dos espejos, cada uno se pega en cada tapa . las medidas son estirado 30 cm de alto y 7…
This pump is designed to work with a servo or simple DC hobby motor. It requires additional components including: 3mm ID/4mm OD Silicon Tubing (like this https://www.amazon.com/dp/B06W2JW633 ) 3 Ball Bearings (4mm X 13mm X5mm…
This is a traditional filipino knife named Keris or Kris. Due to its design it is unable to cause any real damage to anyone. It can be used for training or cosplay
Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Chaos 45 RPM Adapter - https://www.thingiverse.com/thing:2847311 Chaos 45 RPM Adapter Version 2 -…
Allows you to generate the body parts to build a periscope that appeals to your needs
Artillerist - Lost Ark Figurine stl, 3d print character model from the lost ark video game, made for collectible display. You will get a detailed character figurine suitable for gaming dioramas, desk or shelf decor, tabletop roleplay…
These parts were designed for a 42mm steel pole used as a combined CCTV and Wi-Fi mast bolted to the side of a building. Any pole size can be set using OpenSCAD - just change the variables at the top. The fittings are parameterised…
This is a 3d model of my parents home. I took the Google Earth Image and Converted it into a 3d model. Category: Household
Designed for the studio monitors that are standing on the desk stands. But because they stay behind the monitors, I needed to give a rise. But also required to face the monitors downwards, for sure. With the brackets on the sides and…
Saw the “Pens and Pencils” flash contest and I had 2 types of refills, a Parker® Roller Ball and a Pilot® Juice Up 0.4mm, lying around without bodies so it was kismet. This started me off designing a retractable pen without springs with…
Panneau de Jardin Tomates cerises à installer dans les jardinières, sur les carrés potagers ou en pleine terre.
