604 models
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
As suggested by several makers of Filarte3D's model, the closing force of the arm can be increased by moving the arm outside of the model - essentially bending the arm outward. This is exactly what I did - resulting in this model. After…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This is a replacement nut used to clamp the shade in place on my lamp's light socket. The factory's original part broke due to heat fatigue. I printed this model on my Prusa MK3S+ using polymaker's "Galaxy Black" 1.75mm PolyLite™ PLA…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Remixed the strongest pegboard clip I've seen to make it a bit more sturdy and added removal openings
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This small container holds 6 or 7 sweetener packets, and can be carried in a pocket, purse, or what-have-you. The lid is designed so that it stays attached to the holder, so it will not get misplaced. The lid is “hinged” in the middle to…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Jack retention/support system nut for Dacia/Renault Dokker also known as Renault Kangoo in some markets. It's an original model very close to the original part. the center screw hole Isn't fully threaded, you can directly thread it on the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Sup adapter for Etenwolf Air 3 Pump. (Amazon) https://a.co/d/jj8SY0z Used for Paddleboard inflation (Amazon) https://a.co/d/jj8SY0z Infil 100% Filament: PLA/PETG/ABS/Nylon STL & GCODE (Coreone)
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
I designed a push-in retention clip (single and double version) to ensure that the hangers do not “jump” out of the cleats/adapters and fall. The single version should work with a single wall cleat, the double version works with…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
No more wimpy pegboard retention clips. This one has some stout. It hold fast and you may even need a flat blade screw driver to remove it. Happy Printing! You can help To help cover the expenses of printing prototypes for the models I…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Now the tensioning screws and springs don't fall out when you open the MMU and flip the top over. Print Instructions Start with PrusaSlicer's default PETG 0.2mm SPEED preset. Add Support Enforcers for the tabs sticking out.
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
UPDATE: I had troubles with the spring strength as well as engagement tooth angle and fidelity printing in the orientation I needed, so I have created a V2 that has a “tooth” bar that prints horizontally on the build plate (indicated by…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
Introduction Ever since getting the Ikea Friheten corner couch I was bothered by the fact that my robot vacuum was unable to reach under the couch. Also standing up from a "low" couch is getting harder with age. So I decided to design…
Print approx. €28.09–€34.33 excl. taxPreliminary estimate for one variant
Ideal para cambios de retenes de horquillas con barra de 42mm, no daña la superfície de goma del retén. Se recomienda usar un martillo de nylon para golpear la herramienta y encajar los retenes en su posición.
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
The Black Diamond Spot 2009 Headlamp has a design flaw where plastic detents can easily break off. This then renders the headlamp a floppy and ineffective tool. To restore detent functionality where you can once again adjust the headlamp…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Busch & Müller Brixxi und Reflektor Halter für Ortlieb Satteltaschen Arschraketen Satteltaschen mit Daisy Chain oder Taschen mit ähnlichen Montagepunkten. Ortlieb Satteltasche…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
This insert is designed to fit Pretense in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
100x160mm sign, reading "Fight for the right to pretend to work" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Mit passenden Neodym-Magneten ergänzt, hat man einen praktischen Magnetpin. Der Magnet wird einfach mit Sekundenkleber eingeklebt – das Entfetten nicht vergessen! Das Modell ist so gestaltet, dass der Magnet minimal übersteht, um eine…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Armrest cup holder for Stanley cup. Originally made for Ikea Friheten sofa, but it fit for every sofa with armrest thickness around 110mm. Holder is made up of 2 pieces. Its connected via thread what is allowing easy replacement and using…
Print approx. €10.63–€12.99 excl. taxPreliminary estimate for PETGSource material: PET
Pomůcka pro vyblokování vlhké pleteniny, aby držela dobře požadovaný tvar. Tisknuto tryskou 0,4 na výšku vrstvy 0,2. Ve výšce 2,20 pozastavení tisku a vložení špendlíků. Použity ocelové T špendlíky 32x0,75 mm. U tisku je podložka, která…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Untested work in progress
This safety eyes need to be printed with low layer height (0.1mm) to achieve a nice result. The eyes are made from two different parts for ease of printing (the rod and the head) that need to be glued together, and also it make it easy to…
A parametric case for standard 1/4″ hex bits , designed for practicality and flexibility. The main case is print-in-place and uses 4 mm DIA × 1.5 mm or 3 mm thick magnets to keep it securely closed. The spring tabs in each row hold the…
This is a remix if the inner portion of my original model. This one is intended to be printed with rigid filament (PLA, PETG, ABS, etc.). It has the corresponding number of holes on the bottom to insert 6x3mm magnets for bit retention.…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…
Hook part extended by 5mm on both mounts. Category: Computer
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
Uses 4 M3x15mm bolts 4 M3 nuts 4 M3 washers (optional) The backplate has a second version which doesn't require supports and will bridge the overhang instead Consider rotating the retention mount for better strength. That will instead…
Remix is the head (8mm) and rod piece together as one piece. No glue required.
This is the SKELETEN, a strong, modular, easy-to-assemble 10-inch rack. It is called the Skeleten because it features bone-shaped side supports and it is, well, a ten-inch rack. I wanted a strong, simple, modular 10-inch rack for my…
Printed with no supports, .2 layer height, 4 top and bottom layers, 3 side layers, 40% infill.
I needed a clamp that exerts force even when there's little material between the jaws, or that has more force than other clamps. So I designed a clamp with separate jaws that gains preload through the thick jaws. Additionally, it looks…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Key Features of the Door Seal Add Heat Retention: Our door seal brings the heat, literally. It's all about insulation, creating a stable printing zone that spells primo print quality. Reduce Drafts: Reduce unwanted temperature shifts, the…
Quick printed version of the kydex AR mag inserts you'll find in nicer pouches. If printed in PLA they will creep over time, but I've found the retention to still be pretty reliable over time. Obviously higher temp resistance materials…
Print instructions: 0.2mm layer height 4 walls for strength 100% sparse infill Turn off single layer for Top Surfaces
Many printers, especially those with a Bowden extruder, use PC4-M10 fittings to retain the PTFE tube at the extruder. Reportedly on Bowden printers it helps with retraction if the fittings at both ends have a firm grip on the PTFE tube so…
Gridfinity holder for socket/female side of USB A devices. I use mine to hold USB A to USB C adapters. If desired, there is also a looser fit model. The base model is a friction fit that acts a pseudo handle. Printed with PLA+ (regular…
Tippmann ball dente seams to be working fine after 50 shots i used saint smart tpu , so print with a medium hardness tpu
This .scad will generate a ball bearing retention ring of any size you want with any number of balls! I created it to work with Airsoft pellets (BBs) but it will work with any ball or sphere shaped object. The idea is to use this in a…
This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
Are you ready to experience the next level of gaming convenience? Introducing the phenomenal Wall Mount Bracket Remix for the Nintendo Switch! Brace yourself for a description that will make your heart race, your palms sweat, and your…
This is designed to raise our couch to accomodate our Dreame vacuum robot. Scale (only) the height in your slicer to adapt the heigth of the raiser. Includes a raise for the roller aswell. The raisers can also be stacked, should your…
Ein kleiner betender Engel zur Dekoration, gescannt mit dem Einstar Vega. Größe: 59mm x 86mm x 97mm
Detent plastic hinges More part numbers and CAD formats on www.traceparts.com/goto?Product=90-18062018-053028
A simple Flag pole holder. Anchor/bolt spacing based off standard brick joints and using 3/16" bolts. Sized for a 1" flag pole. Infill: 20-30% Infill Modifiers: 99-100% as shown in photo Support: Yes, Tree Walls: 4-6 Top/Bottom Surfaces:…
Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.
Retaining clip for DieselGeek's amazing first gear getter bushing. Under heavy use, the bushing may fall out due to its friction fit. This 3D printed plastic clip slides over the bushing and holds everything securely in place. You can…
This is a modified shroud and pump for the Orion Blaster Lynx, Minx, and Lonx 2.1 beta to add a ball detent. This locks the priming grip in the foward position so it doesn't move around easily. Uses a 6x7mm ball detent, the same kind that…
Ein kleiner betender Engel zur Dekoration, gescannt mit dem Einstar Vega. Größe: 69mm x 54mm x 139mm
Print fits on Prusa Mini bed.
This is a remix from the Bicycle Bottle Cage / Holder by PretEnGineering. I made a round shape on the backside for fitting a tube of a bicycle frame and added some tunnels vor mounting it with cable ties as an alternative to screws. Print…
The Impulse Ungineering Ontos O-ring Breech is a modified breech part that uses a DASH-016 O-ring to assist with barrel retention. The O-ring adds extra friction where excess vibration from play may push the barrel out of the blaster.…
Very simple 38 / 357 speed loader that actually keeps the bullets aligned, actually has a detent, and actually fits without getting jammed at an angle. - Uses a single M4 screw between 10 & 30mm long. - 20-30g of filament depending on…
This is a box for up to 3 sd cards, that is made to be durable, with spring loaded retention brackets to make sure the SD cards don't fall out. There are two versions, either a print in place one, or one using a 12mm M3 bolt and nut. The…
This simple spool stopper is designed specifically for the Ender 3 V3 SE and solves that annoying wobble during prints. Function: stabilizes the spool to prevent front-to-back movement. Installation: fits directly onto the stock holder,…
I made the detent more pronounced, and reduced the pressure on the nubbin so that it doesn't rub on the part until it comes in contact with the detent. Snaps snuggly into the throttle slide, with no need for additional supports on the…
While using the original model, the parts always fell apart when my cables would move slightly, so I designed this little press-fitted cap to fix this problem. The whole inner assembly could still leave the outer ring at that point, so a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've tried a few of the bit holsters out there but none seem to have worked for…
My daughter wished for a table tennis table for her Playmobil set. It was important to her that the legs can be removed, but I recommend using a drop of glue. Not a very elaborate design, but it serves its purpose.
Replaces the spring and blade retention pin with a self retaining spring and a larger base pin, also adds one more locking lobe so the spring doesn't get squished. Print Settings: Layer Height: 0.2mm Infill: 30% Material: PETG Supports on…
this is a remix of thing:4915344 , the wheel does work OK as in the original design , but the detent part doesn't fit on the Voxelab Aquila's Y-carriage plate on it's power-side (back left), though there's another remix that already fix…
Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…
Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.
An upgraded go-pro compatible holder for the UV5R radios. There is an added slot for better belt clip retention to help prevent movement under off-roading conditions. It also significantly helps reduce noise from the radio rattling around…
The retention clips are quick and easy to use, except a bit fiddly to open. Added finger tabs to make it easier to manipulate. Remixed both the normal retention clips, and the larger one that is for the drive side on the receiver spindle
This is a retention sheath for a full sized Kabar (1211 in my case). The sheath has two lugs that bend downward when inserting the knife into the sheath and spring up behind the cross guard, retaining the knife in the sheath. To remove…
There is also a model with deeper grooves available, although it may require some breaking in / sanding in order to function smoothly. PRINT SETTINGS Printer: Flashforge Adventurer 5M Layer Height: 0.2mm Wall Loops: 3 Filament: PLA…
I needed a place to put my cup near the sofa and didn't feel like getting a table. You can simply attach this cup holder to the arm of the Friheten sofa. Max cup diameter is 87 mm but you can edit the .ipt or .step file. There are both…
Redesigned from scratch for the OLED variant's dimensions and features such as speaker ports and vents. Added retention clips to hold the device in the mount for added safety. Retained the original aesthetic although slightly modified,…
Stav na pletení náramků z gumiček-4 trny UPDATE: Přidána verze s rukojetí Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Hier findet Ihr einfache Modelle von verschiedenen Sternen und Planeten. Ich habe diese erstellt um sie mit Glow in the Dark Material zu drucken und den Kindern einen leuchtenden “Weltall - Himmel” im Zimmer zu machen. Gedruckt wird in…
Tired of cutting yourself on your chisel when you dig for something in your toolbag? Or sick of finding out that the chisel you just sharpened has been dinged by another tool in the drawer? Fear no more, these guards are easy to print,…
This is a remix, adjusted and optimized for TetherPRO cable and Nikon Z6 Mark II
This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…
The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place. Printed successfully in both PLA and PETG without issues. For…
Update 4/29/2025- STL formats added. I realized I left out the Antenna and Keypad from the first upload so that was updated as well. A firefighter Helmet, Axe, Walkie-Talkie and Extinguisher for pretend play/dress-up. Supports needed on…
Detent and other parts used in the box drum video below: Provided in STEP and Fusion 360 archives. For reference.
My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…
NOTE: This model is not optimized for 3D printing. This is intended only as a reference, thus only .step files are provided. .f3d file available upon request.
This is to go with the Various Cheese prints intended for PRETEND PLAY ONLY, not for actual kitchen use or to serve food on. Enjoy this with our many pretend play foods and kitchen toys to help kids learn about the world around them.…
Print 100% infill. I've used PETG because it need to be flexible. Mount between the adapter and the spool winder as you can see in the image
I found the original version very good and useful, however I usually squash the first layer so the part came out rather sharp on the edges, this remixed version have a chamfer for softer grip. Also, I didn't want to glue the socket…
These are anti-droop arms for the Modular Mounting System. For full documentation, knobs, and other parts, please refer to the original model . The joints in the original design are held purely through friction, which means they droop…
I found it impossible to set up good Airbus style CLB + FLX/MCT + TOGA detents with the stock STECS detent pieces so I designed this custom piece that adds three identical and equally spaced detents. Print with 0.2mm layer height and 100%…
These were specifically design to replace the drawer slide detents on a Kennedy toolbox. The original pieces become brittle over time and will fail. They will likely be a little tight at first and get better with use. Print Settings:…
Concept 2 rower phone or device rest/mount remix of model from Leoquart
Got tired of the Velcro pads failing constantly, forcing me to adjust the floor mats every damn time I got in the car. This is my solution. Printing: Small part, so go 100% infill @ .2 or smaller Button face down Organic supports on…
Instructions: NOTE* IF PRUSA DOWNLOAD ISN'T WORKING, GO HERE: https://www.thingiverse.com/thing:4246175 https://grabcad.com/library/prusa-covid-19-coronavirus-face-shield-with-integrated-folding-detent-strap-1 UPDATE 13/04/2020: NEWEST…
This mod mimics the A320 detents. I included the .step files in case you want to rearrange the detents or improve it. If the parts aren't fitting in the base part, sand it down, lower the flow rate or scale the base part by 0.5% in its…
Stirnzahnräder, Hohlräder, Planetensatz: - Zahnformen können beeinflusst werden: Kappen, Einzug, Kontur (nur Hohlrad), Schrägverzahnung - Planeten erhalten Markierungen für die Einbaupositionen - Zähnezahlen werden eingeprägt (bei 0,25 mm…
