Counting matching models…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
The original thingiverse post (https://www.thingiverse.com/thing:4723570 ) had an amazing model by the user Kuro ( https://www.thingiverse.com/kuro2/designs ). The main issues are that the model files are not split, making it harder to…
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Use organic supports and support blocker
Overview of Resolved Issues from the Original Design The screw holes on the bottom left of the boxes are too large in the original V1 and V2 designs. M3 screws can be inserted and removed with slight pressure. The left side of the…
V0 Stealth Skirts Mods and Fixes The original mod is in VoronUser repo . At the time of writing these fixes and mods are available in this pull request at Maverick-3D's repo pending to be merged. Only the parts that was changed are…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
I slightly increased the distance between the rollers on the Y-gantry, so the 2020 rail fits better. I also made two of the holes in the lower gantry plate bigger for eccentric nuts, like in the upper plate. Also added a mount for my…
Based on the design of the “ Modular Drawers for IKEA Kallax ” by KILO , I created longer versions to fill up the entire depth of a Kallax pocket. Also, there seems to be a critical part missing in his Printable, which I added here, see…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
While printing ProfessorBoots truck I encountered some small issues which this remix fixes: A small hole would appear in the back of the headlight bowls when slicing in Bambu, I've added a small chamfer to the inside end of the headlight…
Here's a funny and functional piece of wall art for your shop or utility closet! Print Settings: 0.2mm layers, 3 walls, 10% infill, 5 bottom layers, 5 top layers, no supports With 0.2mm layer height - change filament color at 1.6mm height…
Fixes for some Brother MFC combos. Mine is an MFC-L8390CDW, a recent model for which the below problems are encountered by several users. The stopper prevent the guide from shifting during the scanning of many A4 pages, which often cause…
This is an oversized version of the original filament sensor lever. It allows you to trim itback as needed to get it to work perfectly for your printers tolerances. The following video shows how the sensor works and I used this design mod…
SELLING MACHINEEEEEEEEEEE
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
The bottom of the original design did not fit the existing fan duct. I adjusted the size to fit inside of the existing duct. For the fan, I couldn't find a 24V 3-wire PWM type so I'm using a 2-wire and left the yellow wire disconnected.…
Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models. Fixed some parts alignment EDIT: 27.02.2026 - gatespacer bearing embedding made better…
I remixed the original design and only added the clip, fixing issues related to the clip
Fixes I have designed to adress missing features for IKEA enclosure v1 enclosure: spacer - 50x50x2 mm, hole diam: ø3mm - adress issue with doors opening, they were too tight as well as other plexi sides excessive tension, causing stucking…
The 8BitDo Mod Kit for Original SNES/SFC Controller has slightly slimmer shoulder button PCB's compared to original controllers. This can result in missing inputs because the conductive rubber barely touches the PCB in some cases. If your…
Ikea IVAR is great system that's very customizable. I just didn't like that in my system the top of my sliding door cabinet didn't line up with the shelves surrounding it. So, I made these shims and posts to insert on the underside of the…
The haslab packs are starting to ship, and they are awesome... but my pack showed up broken. The connection between the cyclotron cap and the pack was too loose. This would cause the pack to not power up, or immediately lose connection as…
If you downloaded the Firefighting Mech from the recent 1440 Makers Charity Stream.. you will want to download these files and print these pieces in place of the originals. A few people have printed the mech and there were common issues…
This is for the second printing of Santa's Workshop. A few pieces to make the insert fit into the second printing box, also supports sleeved cards. Mrgigg's full insert was for the first printing, and not all the pieces fit so I adjusted…
Update 10-8-23: Added a X carriage that lines up with the 3rd mounting hole in the stepper motor to prevent extruder drop. Prusa MK3 3mm extruder with better documentation, parts to accommodate my 3mm bondtech sensor remix and parts to…
I just provide the "fixed" files I did myself via OpenSCAD.
BETA WORKING FILES in 3MF for PRUSASLICER including hotfix negative volumes For now supports for the Cthulhu are a nightmere, but it works . If you've ever wondered where to keep your Cthulhu, there's only one correct answer ... ... of…
DO NOT PRINT - FIXES IN PROGRESS Slight design change from photos and instructions, new design the front face and slider panel twist together No additional hardware necessary Fits Models Eufy L50 SES and L60 SES Congo 10000, 8090 Ultra…
This retainer fixes the error "fill water tank" being announced while the water tank is installed for the iRobot Brava Jet M6. Category: Replacement Parts
This is a hard mount designed for printing in PETG. Do not use a soft mount with the Moonlight, as it will significantly worsen jello artefacts. Switching to a hard mount will resolve this issue. The holes have been adjusted to allow the…
Fixes of various dummy 13 parts that worked for my builds
Introduction This is an adapter for: Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Here are some of the key measurements, if you have different devices but think this…
Cut with more accuracy and create cleaner fills using Lightburn. Scan alignment and dimensional accuracy guide This video covers both of these items. You can see both the before and after results in my images(6000mm/m 0.18 line shift was…
These small models easily fix annoying issues with the WCP303 Energizer wireless charger. The first model effortlessly slides in to the slot to hold up the main phone stand for when the piece breaks. With the holder/light cover, it works…
ReDuplicator converted to MGN12 rails on X and Z. New 90deg fan duct should allow 255mm max z height (I got 236mm with the 45deg) Most of the original STLs reused had small defects or didn't line up so I fixed those while I was at it.…
Broken Dyson Handle or missing Canister catch
I was finally so fed up with how janky this flushing system is and with the constantly jamming flush plate buttons that I decided to model up some things in FreeCAD to improve the situation somewhat. Current fixes include a connection…
✅ What’s new in V3 This V3 version introduces a true auto-centering roller geometry , inspired by real mechanical guiding principles: 3° inward taper (convergent draft angle) Larger diameter at the center Smaller diameter toward both ends…
Introduction If you use your Hario Polaris scale for pour-over coffee, you might have noticed the weight reading "drifting" or changing slightly even when nothing is being added. This is a common issue caused by the high heat of the…
You need two M3x12 screws but no nuts. The holes on the bottom are for any mounting with M3-Screws. No Raft or Support. You only need to print one of the inner frames, the Remix is a copy of the original design, the Filet adds a large…
Remixed the design to add a few features I thought were missing or weak in the original, Added a sturdy top bar to the top piece Added a cavity to fill with ball bearings or BB's (use a soldering iron at low temp and extra filament to…
Changes that I tried previously and wanted to either fix or remake cause boredom and wanted to. (Just wanted to try them in a new cad suite) Tape Separator Just a thin separator that hook around the front and keep the rolls from rolling…
yes i painted the replacement needle with nail polish 🤷♂ I couldn't find an image of the light bulb adapter fix, but mine was missing a few
One drawer, three fixes — a set of three different pieces, not three sizes of one item. (1) A 2 × 3 baseplate that lays out six 42 mm grid positions with raised pads for bins to sit on, so a set stays put instead of sliding around the…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
This is a hard mount designed for printing in PETG. Do not use a soft mount with the Moonlight, as it will significantly worsen jello artefacts. Switching to a hard mount will resolve this issue. The holes have been adjusted to allow the…
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Introduction If you use your Hario Polaris scale for pour-over coffee, you might have noticed the weight reading "drifting" or changing slightly even when nothing is being added. This is a common issue caused by the high heat of the…
Introduction This is an adapter for: Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Tomlov TM-DM9 Microscope iFixes iL37 Polarized Ring Light Here are some of the key measurements, if you have different devices but think this…
Hey everyone! First off, massive credit to the original creator for the awesome Space Marine armor evolution set. You can find the OG files right here: https://www.thingiverse.com/thing:7294989 As much as I loved the original models, my…
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
![Ikea IVAR Cabinet with Sliding Doors Shims [Fixes Height Mismatch]](https://media.printables.com/media/prints/119234/images/1158942_50f82914-4b28-4433-aba3-60233d2d794a/img_3385.jpg)
