Search results: forg

Tits out, panties forgotten.

HueForge Hummingbird

Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…

Butterfly HueForge

HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Blue Starter Pack :…

Fire Dragon HueForge

HueForge Fire Dragon created for the Polymaker Fire Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Fire Color Set: Panchroma Matte…

Halloween - Hueforge

Original art created by us, then we used Hueforge to create this 200x200 piece Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab…

Milwaukee M18 Heavy-Duty battery holder (High Demand & Forge) // Milwaukee M18 Akku-Halter (High-Output & Forge)

Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…

Hulk - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm)…

MK4S Filament Guide | Side Feeding | Forgetful | Dry Box

Filament guide for the MK4 frame, designed for side feeding. Includes a forgetful feature for inserting filament when already loaded. NOTE: Separate 3mf & STLs for left and right sides are provided; use the correct one. The forgetful…

Gol D Roger - One Piece - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Hueforge - Cthulhu

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA Overture White Transmission Distance: 4.4 Swap Instructions:…

Avengers - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Prusament Jet Black PLA ESUN PLA LITE Gris PLA PolyTerra Wood Brown PLA Esun Bone White PLA Prusament Pineapple Yellow PLA Control3d Blanco…

Gandalf - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Sunlu Grey PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to…

Hueforge Choso 2D Art

Hello! Here is my first attempt at using HueForge for creating 2d art pieces. I used a panel from the manga to make this piece. Use the following settings for best printing: Print at 0.08mm layer height, first layer 0.16mm, 100% infill.…

Kobe Bryant - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Ziro Dark Grey PLA Sunlu Meta Grey PLA+ Esun Bone White Swap Instructions: Start with Black At layer #11…

Mickey Mouse Boat - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Bone White At…

Native American Woman Hueforge filament painting

This is a 5 color print. Created using Hueforge and midjourney. Instructions are for bambu slicer and prusa slicer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm (used a base layer of 0.24 to provide some…

Lebron James - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA ESUN PLA+ Beige PLA Basico Control3D White Swap Instructions: Start…

Aladdin - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #6 (0.56mm)…

Myosotis keychain (forget-me-not)

Keychain with flowers theme. Manual color change: white, green, blue, yellow.

Wall art - Dragon hueforge

My remix is simplifier, repaired STL, make 3mf for prusa nk3s a working STL in prusaslicer

Daredevil - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with…

HueForge Pinhead

My first attempt at HF. I can see the potential of making some amazing images in the future.

Bob Marley Hueforge Filamentpainting

Swap Instructions: LAYER #5 PLA+ SUNLU BLACK 0.48mm LAYER #8 PLA SILK OVERTURE RED CHRISTHMAS 0.72mm LAYER #13 PLA SILK AMAZON BASICS COPPER 1.12mm LAYER#16 PLA SILK OVERTURE NEON GREEN 1.36mm UNTIL THE END PLA+ SUNLU WHITE Printing…

Statue Of Liberty - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Sunlu Grey PLA+ Overture Light Grey PLA Control3d White Swap Instructions: Start with Black At layer #7 (0.64mm) swap…

Tazmanian Devil - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Overture Chocolate PLA Prusament Lipstick Red PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions: Start with…

Wembanyama Logo - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Basico Control3D White Swap Instructions: Start with Black At layer #16 (1.36mm) swap to White for the rest.

Joker - Jack Nicholson - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…

Moon Knight - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…

Coaster pack Hueforge/multicolor

I got plenty of lose few grams filament rolls. Not so much plastic to make something useful so i decided to make few coasters from plenty of hue forge designs available on printables. Every coaster is in his own folder but if you want to…

Sunset Mech Hueforge Filament painting

5 Color Hueforge model of a mech in a field at sunset. DO NOT RESCALE Ive included a small 100x100mm and a large 200x200mm model slicing is the same for both Colors used: (all matterhackers build series /polymaker (I do not know the…

Stardew Valley Board Game Insert (Multi Color): Forgeable Cards

Main Print Page Color sequence: Primary Color Pink (Sprint) Green (Summer) Brown (Autumn) Blue (Winter)

PlugBox - RemixForge Series | Quick-Clip Version

Where Your Earplugs Ride Shotgun. Whether you're clocking in at the jobsite, clocking out at the range, or tuning out the world on the go—the PlugBox is your earplug’s first line of defense. Tactical-Ready, Shop-Tested The PlugBox is a…

Black Phanter - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d Blue PLA+ Sunlu Grey PLA+ Overture Ligth Grey PLA PolyTerra Wood Brown PLA Control3d White Swap Instructions:…

HueForge - Geisha (AI Art)

Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Black base PolyTerra layers: Purple, Sakura Pink, Cotton White…

Captain America - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm)…

Sagrada Familia - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d White Swap Instructions: Start with Black At layer #15 (1.28mm) swap to White for the rest.

Anger - Inside Out - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x193.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Kingpin - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with Black At layer #9…

Wolverine - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x154.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Gothic Raven - Hueforge

Gothic Raven - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments…

Sunset Cowboy Hueforge Filament painting

4 Color Hueforge model of a cowboy at sunset. DO NOT RESCALE Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Red Transmission…

Final Fantasy - Cloud Strife - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Kamado Tanjiro (Hueforge)

Hey, Je partage ma première création sur Hueforge ! Impression à 100% de remplissage avec une hauteur de couche de 0,16mm et une couche de base de 0,2mm . Le modèle a une taille de 200x112,5mm. Vous pouvez imprimer à des hauteurs de…

Joe Rogan Experience Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Das Filament Black matt Transmission Distance: 0.6 Das Filament Orange Transmission Distance: 5 Prusa Lithophane PLA+ White Transmission…

Majin Buu and Babidi - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d White Swap Instructions: Start with Black At layer #17 (1.44mm) swap to White for the rest.

Vegeta and Trunks Hueforge Manga Panel

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x197.92mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.3mm and the Actual Depth is 1.2mm…

Leonardo - Ninja Turtle - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

The Penguin - Batman Returns - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA ESUN PLA+ Beige PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At…

Forgiving Nozzle Wrench

Update: The wrench now tapers, making it easier to use with a sock. Internal geometry adjusted for better results. Over time we often get crud on our nozzles, which makes it very difficult to use most nozzle wrenches as they won't slip…

Margot Robbie Hueforge

An image of Margot Robbie

Master Roshi - Dragon Ball - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x207.61mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Frankenstein's monster Hueforge

I wanted to create Hueforges of the Universal Monsters (Dracula, Frankenstein, Bride of Frankenstein, Invisible Man, Wolf Man, Creature from the Black Lagoon) and this is the first work. I also wanted to make some Hueforges that are…

Wembanyama Funko - Hueforge

Project: WembyFunko.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…

Abraham Lincoln Portrait by Alexander Gardner 1863 (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White…

Edward Scissorhands - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

FARON FORGE model MARK 1

Important things Everyone likes Iron Man, but instead of taking it seriously, everyone keeps doing the same thing over and over again. It's time to organize and standardize it! Here is the prototype of my armor! Download, print, refine…

Hada y el espiritu del bosque hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Green…

Sword being forged on anvil

Print with brim and supports everywhere

Piccolo - Dragon Ball - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Breaking Bad - Walter White - HueForge - Puzzle

I created this nice puzzle, with the image of Walter White, I think he is a much loved character, for his fantastic TV series. I wanted to try the technique for creating nice puzzles, which I had read on the Prusa blog a long time ago. I…

HueForge - Geisha, Modern Disney Style (AI Art)

Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Purple, Azure Blue, Ms. Pink Blend, Vanilla White HueForge Project…

Halter für Hueforge

Ein kleiner minimalistischer Halter für Hueforge-Bilder. Dieser hier funktioniert problemlos mit Bildern der Größe 150x150 mm. Lasst es mich wissen, wenn er auch bei größeren Bildern funktioniert. Gedruckt in PLA 0,2 Keine Stützen In…

Forgiveness or Permission sign

100x160mm sign, reading "Forgiveness is easier to get than Permission" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs .…

Glowforge Pro Air Assist Nozzle

This design currently works, but I will be improving it soon. I recommend the following setting for the 3D print: Use at least 20% infill. Use PETG instead of PLA. Stronger materials than PETG will work as well. I recommend painting on…

1:10 Nami from One Piece Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 58.38x169mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.08mm and the Actual…

Fire Forged - Phillips one blade

Forged in Fire - Reused flame and LED base concept used in my other designs. Can be printed as large or small variant with a unique shield for each application. The LED base is designed to work with 3mm flashing LEDs. The flash is built…

HueForge - Fatum Betula Cover Art

My first HueForge project where I was reminded not to trust people-from-the-Internet's data values explicitly; I needed to do two prints to correct terrible coloring from someone else's TD calculations. This print uses 5 unique filaments.…

Angel Tattoo HueForge

Beautiful Angel HueForge!! Sized at 5" x 7" but can be scaled to an 8" x 10". Print Settings..... First layer height .16 additional layers .08 First Color - Black Second Color - Dark Grey @ Layer 11 Third Color - Light Grey @ Layer 16…

FLASHFORGE ADVENTURER 5M ENCLOSURE

This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…

Flashforge Adventurer 5M Drag Chain (AD5M)

I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…

FlashForge AD5X Poop Purge Chute and Bucket

A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…

Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…

Flashforge Adventurer 5M Toolkit

23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…

FlashForge Adventurer 5M/5M PRO/5X Noise Reductor

Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.

New Enclosure of Flashforge AD5X

The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…

New v3.0 of top riser set for Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Lion Head-Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Orange At layer #11 (1mm) swap to Beige At layer #18 (1.56mm) swap to White for the rest.

Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1

CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…

Base for Flashforge AD5X.

I am attaching the STEP file for possible modifications. It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support

Flashforge AD5X Filament Spool Numbers

Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed. Just clips in to existing spindle hex hole at the end. Print Settings: Nozzle Temperature: 220°C…

Flashforge Adventurer AD5X Cover

This design can be printed using one of the AD5X feature - Multi-Color Printing.

Detailed TD calibration step test for HueForge

UPDATED 2023-07-25: Added a guide on how to use this test, plus other additional info. If you're interested just in using the test, don't read it whole; just read the “What is the Blending Distance (BD)?” section and do the steps of…

Flashforge Printbed Scraper.

Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

flashforge adventurer 5m pro tools holder with glue slot

now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.

Flashforge AD5X Tool Insert

A Flashforge AD5X tool insert to fit into the Flashforge Adventurer 5M Toolkit .

Enclosure For Flashforge AD5X

This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas

Poop guide FlashForge AD5X

Designed for users who want printer waste to drop to the left side of the printer instead of behind it. Installs into the standard mounting using the existing bolts on the rear cover.

FlashForge AD5X enclosure

This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…

Flashforge Adventurer 5M pro side spool holder + toolbox

I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Flashforge Adventurer 5m Pro Extruder Pipe Guide

An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…

Flashforge AD5X Poop Bin

Wanted a larger bin to hold filament waste. Painted a few spaced support strips on the underside of the raised bottom part (.mf); otherwise very simple print

buckle for extruder cable and the filament tube for FlashForge AD5X

This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…

FlashForge Adventurer 5M Screen Bezel With Optional Stylus Holder

Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…

Hueforge Christmas Ornaments

There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…

Flashforge AD5M Anti-Vibration Feet

Anti Vibration feet for Flashforge Adventurer 5m. The rear feet sit at a 45 degree angle to be able to fit. These make the printer feel and sound a lot more solid and help reduce vibrations tremendously. I'm not sure if it is necessary…

Flashforge Adventurer 5M (AD5M) Nozzles Box and Accessories Box - two styles to choose from, including sets that attach to back of printer v1.2

VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…