5,352 models
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Shinto Torii Gate. Zen and Shinto are both religions with a long history and significant influence in Japan. Shinto is a system of nature worship with prehistoric roots in that country, and its traditions are interwoven with Japanese life…
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) If the Veyron was legendary, the Chiron is pure mythology on wheels. This 3D printable sculpture brings the bold silhouette of the Bugatti Chiron to life in a sleek, wall-mounted display –…
Print approx. €17.80–€21.75 excl. taxPreliminary estimate for one variant
Silhouette gatto da incollare sopra l'interruttore della luce, simpatico per abbellire casa per gli amanti dei gatti, in tre differenti posizioni. Ho inserito anche il g.code di tutti e tre con un unica stampa.
Hello, I have a claymore watering mine for gardeners. Fantastic model for watering plants. Just pour water inside and it will gradually hydrate your bouquet or plant! I used PLA/PETG Basic as the material yes need to use supports If you…
There's 2 STL versions attached with different sizes, also a Blend file in case you whant to make an edit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament material: PLA Notes: Blend file is configured in…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 8.6mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for one variant
This is a fun little planter I designed in Fusion360. Plant little vines, or flowers and watch them grow till you have a blooming tunnel of blooming flowers on crawling vines! The boxes are pretty self explanatory, the arch is a little…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Display stand for souvenir pressed pennies (elongated coins). Will hold up to 24 coins in total. From left to right the display is designed to hold alternating horizontal / vertical coins (see photo for an example). Printed with 3 walls…
Print approx. €11.97–€14.63 excl. taxPreliminary estimate for one variant
This Blast Gate is redesigned to be used with standard 2" Sch 40 PVC DWV pipe (Outside Diameter: 2.375" - Inside Diameter 2.047"). Can be found at most hardware stores. You can assemble with 1/4, M6 or printable bolts as I did. NOTE- The…
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
5 access options: fully open, drone exclusion, queen exclusion, closed with ventilation and fully closed.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This model is styled as a module of a real frigate ship, has a very simple design, and is also suitable for 3D printing. This model is intended for decorative or imaginative play purposes only . It is not suitable for contact with food,…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Print these set of earrings so that x = 17cm 0.20mm is ok works on prusa mini
Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…
Instead of a base with stairs, I decided to remove the stairs using TinkerCad to make stand compact. I used a 5% gyroid infill to save filament and print time. The base is still strong and does not tip over from the weight of the echo…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
Bobble the head of your favorite tyrannical leader of the evil Decepticons! I got the Megatron head model from this set of parts on Thingiverse: https://www.thingiverse.com/thing:2373072/files All I did was scale it appropriately, and use…
Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.
When printing I used a brim for the gates, and I used tree supports for the main piece. The Gcodes have the support and the brim and we're designed for a Prusa Mini Plus
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €7.70–€9.41 excl. taxPreliminary estimate for one variant
This is a Jig to help you fix the FlexGate issue on Macbook Pro version 2016 and 2017. The new cable will be 4mm longer and there is a line to help with the cut at the right lenght. It is highly inspired from…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This model expands the existing colour options by allowing you to use any filament you have in storage, enabling you to fully customize your Elgato Stream Deck + to match your style and aesthetic preferences—all without paying 19.99€ +…
Gatto stilizzato da incollare a parete spessore 2mm
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Honey bees that belong to the colony learn to navigate the long entrance with ease. Robber bees, hornets, wasps are not able and wonder around long enough to be attacked by the colony. Print Directions: The Gate entrance should have the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
There is a model of a cat keyring. -0.16mm -holders: no -PLA
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This is a print in place pen cup for all your pen holding needs. No supports needed, works great in PLA or PETG. Category: Office
Print approx. €11.96–€14.61 excl. taxPreliminary estimate for one variant
This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
Značka pro brány velikostně odpovídá Axial značkám dodávaných s modely.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This battery cap will hold itself in place with small tabs “hugging” the Battery posts. The specific design is for the N70T Deep cycle design. This deep cycle battery has secondary smaller 8mm threaded posts for attaching inverters, solar…
Cat lowpoly woggle - Pasa pañuelo de gato para scouts cubscouts o lobatos
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
I created a dedicated spot to put your discarded or destroyed cards. It's made to fit sleeved or unsleeved cards. Layer Height: 0.26mm Infill: 10% grid (I wouldn't go any lower due to internal overhang) Build Time: 5.5 Hours for two prints
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
Print approx. €6.86–€8.39 excl. taxPreliminary estimate for one variant
This gate on my dust collection system is for a 4" metal pipe in and has a 4" flex hose out. If you use my G-code take note of the nozzle size the top part (green) I used a .6 nozzle its because that green filament sucks and clogs a .4…
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
Can be used to connect a blast gate to a DN110 system. You should use an original gasket of the KG pipes. Groove is provided accordingly. The remaining parts still need to be downloaded from the creator here . You need a 8xM6 screws and…
Print approx. €10.20–€12.47 excl. taxPreliminary estimate for one variant
A quick and dirty remix of @bnn_229452 's 6x9 negative carrier for a Beseler 23cii Enlarger
Gatto stilizzato soprammobile o da incollare a parete. Dim: 15cm x 17cm x 2cm
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
I made this by editing and converting a jpg, as I didn't find any at all.
Simplemente se debe de poner en el suelo con el cuenco encima, el tamaño de este gadjet es el de mis cuencos.
UPDATE 13.1.2022: added bigger version, no support needed, better hook stability When: when you have metal board with squared holes when you want to hang on it any of your prints especially when your print has its back side printed as…
Llavero de dos gatos y archivo Gcode con cambio de filamento para cambiar el color de los moños. (recomiendo si descargas el archivo STL habilitar el alisado y relleno 100% para un acabado impecable y resistente)
Print approx. €16.37–€20.00 excl. taxPreliminary estimate for one variant
Gate line for Mario kart version of Gaslands Made to look like question blocks
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
The model was elongated to the same length as the remix by Ernesi to use his remixed side supports. It uses a separately modeled solid bottom which should be printed with grid infill and zero bottom and top layers. This replaces the hex…
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
EDIT: You can find my new mount here which may work out better! Elgato Stream Deck Mini Under Desk Mount for X Rocker Panther Desk. So I wanted a way to mount my Elgato Stream Deck Mini on my desk. I recently bought my first 3D Printer -…
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a case/holder for a DIY LED tinywhoop gate. It's running a WS2812B LED strip controlled by an Arduino board. Due to the design, the case will also hold the gate upright. Nothing else needed. These things are pretty light though.…
Stream Deck Mk2 snaps in and does not wiggle (assuming you're using original faceplate - not tested with printed faceplates).
This model is the stargate logo
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A nice souvenir of Brazillian Navy. I took the ship from ELRAZ and made some changes, like addition of the bulbous bow, the color layer and also created a personalized base.
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
A Classic of Engineering Decorative Art Chassis-No. 57.591 (R. B. Pope) For quite some time, experts all agree that the Bugatti 57 SC Atlantic Coupé belongs in the most beautiful cars that were ever built. Its streamlined body is a…
LLAVERO EN 2D DE GATOS A DOBLE CARA/ 2D DOUBLE-SIDED CAT KEYCHAIN
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Bugatti Typ T35 Grand Prix, 1924
I tried some 3D printed squeezers previously but wanted a slim and small version so that the toothpaste tube can be kept tidily in the usual cup in which we place our toothbrushes and toothpaste so no additional counter space is used up.…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Back story Apparently in 1950 Colgate had a competition to find ways to sell more toothpaste. Someone said they could increase the sales of toothpaste by 40% for $100,000. Colgate agreed, and the the idea was to increase the nozzle size…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I needed something to hold down my roll of 120 medium format film when I scanned them with my DSLR
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I made it myself because I love cars
Built in 1930 Water-cooled, straight 8 cylinder engine, overhead camshaft, 24 valves, 12,763 cc capacity. Maximum power approx. 300 horsepower at 3,000 rpm, 3-speed gearbox, maximum speed approx. 160 km/h. Wheelbase 4,300 mm, track 1,600…
Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant
I needed it so i made it :) Nothing special.. 100% infill PLA
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Bugatti Royale Roadster Esders (1932)
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I bought an irrigation system and it turned out that the ones I bought were weak and leading these tube hooks. So I decided to design a sturdier one based on those and I can match the colours as I want. Anyway, you can see in the photos.…
i wanted to make some decks that were themed for the new doctor who commander decks as well as making making the decks more easily stackable, in my variants there are just plain old stackable versions without any logos/sides on them for…
Print approx. €11.18–€13.66 excl. taxPreliminary estimate for one variant
Soprammobile gatto. Misure: 13,5cm lunghezza, 13cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
After posting my tenting kit for the Keychron Q11 here, someone reached out to me asking about a kit for achieving negative tilt. Although it's not really working for me ergonomically I hope this model helps someone with specific…
When I 3D printed stargate coasters (still working on color and details), I wanted a perfect coaster holder for them. Since I couldnt find any, I made my own.. I remixed two different models into one, and here is the result. I hope youre…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
I thought this album cover is ripe for the the lithopane treatment. Use green LED back light to bring out the dreariness. Normal print settings, and make it as big as you like.
pedestal for minerals
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Simple Stake, prints flat ~15-25% infill, no brim, rafts etc. I print them 10 at a time. Cutouts start at 105% and then 100%, 95% and finally 90%. Push the tubing as far up as possible. I have been using PLA, but I imagine PETG would do…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
GHot tired of losing my stream deck on my mess of a desk so adapted a previous model to suit my needs. Still needs screwing in the same as the previous model, and in addition needs M3x15mm screws top mount the faceplate to keep the device…
Here you have a negative map of Switzerland / outlines of Switzerland. The X & Y diemensions are set to fit right on the Mk3S+ :) but you can adjust the Z-height as you like. The uploaded G-Code is sliced with a Z-height of 5mm . If you…
EN: Two types of garden latch (normal or reinforced). The first type is made entirely of filament, the second type also contains a hole for the additional inserting a reinforcement made from strip steel with a cross section max. 3x20mm.…
Soprammobile gatto. Misure: 11,8cm lunghezza, 17,8cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.
Print approx. €12.01–€14.68 excl. taxPreliminary estimate for one variant
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both. Possible future…
The Brandenburg Gate with the main avenue and the German Parliament. One of the most important parts of the city of Berlin. Place of historical moments and the separation of two worlds. Represented on a scale of 1 km. File in general STL…
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for one variant
Simple spacer to shorten the thread length on the stair gate and add extra stability. Two disk sizes, both overall length of 45mm. I have added step files and the original file can be found at Onshape . it has a free account to alter to…
segundo pack de llaveros en forma de gatos
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant
End cap for run of 13mm irrigation tube / pipe - insert and bend pipe back over to crimp the pipe and stop water flow. Benefit of using this instead of a plug is that it is easily removable without tools (and far simpler than a valve!)…
Die Wände sind mit 1mm dünn, die Bohrlöcher sind für die auf dem Foto dargestellten Spax entwickelt. Nicht zu fest randonnern, bei mir ist die Rückwand ein wenig gesplittert. PLA-NX1 von Extruder wurde hier benutzt. Hab den vorbereitete…
Print approx. €5.84–€7.13 excl. taxPreliminary estimate for one variant
Republic frigate decorative model display
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
A quickly printed holder to hold the ZSA Navigator onto a Moonlander Keyboard. Fits besides the kgeys or onto the thumb cluster. Check Orientation before printing, for left handed use you can simply mirror it. Print with the cable opening…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
I fixed the part with small wood screws.
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Upper Hinge for Safety 1st Stair Gate - SecurTech Flat Step This is built-from-the-ground-up replacement for the hinge, top right, attached to the gate side, for the Safety 1st Stair Gate, the SecurTech Flat Step model. This is the…
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
GiGo's first design (I learned tinkercad for this) Needs build plate supports Takes about an hour Pictured design was printed face up in Prusament PLA Jet Black and Prusa Matt PLA Race Red with a manual color change at 4.20. xoxo gigo
I wanted to purchase some more seed tray inserts made by Stuart, only to find that they have discontinued them. 3D printing to the rescue! The inserts are 205mm long and 72mm wide and you can fit five of them into a standard propagator…
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant
The covers from my old Moovo XW4/XW5 Automatic Gate Arms became brittle so I needed new parts. But because it seems that this models are discontinued, I can not found any new parts for repairs. So I design the cover and replaced the old…
The size of the pocket is adapted to the NEW MHUB-W-Q version of the Tuya gate. It has a circle-shaped ON/OFF button in the lower part. The microUSB connector is also easily accessible.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Dispositif inspiré d'un portail coulissant pour fermer efficacement un portillon en bois. Penser à mettre des taquets des 2 cotés pour empècher la planche d'aller trop loin et de faire sortir la roue dentée de la crémaillère. Les…
Hello I made RC Car wheel rims with Bugatti Divo wheel design . You can find the measurements in the pinned photos . Print it upside-down - the spokes are printed " last ". (The print starts with the rim wall.) Use Snug-fitting supports.…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
childs lock for gate, specialneeds children who learned how to open gate have a bit more trouble opening it with this lock. design is different from photos, have more flat surface for easy printing. unscrew the screw a bit, not all the…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
I saw this propagation station design on Makerworld by creator @dyst.lab but i couldnt customize it to fit my test tubes or properly load up in my slicer, (could be user error), but i just went ahead and designed my own, heres the link to…
quando ci si assenta per qualche giorno da casa e si lascia il cane o il gatto da soli si può collegare il beverino ad un contenitore di acqua posto in remoto al punto di ristoro
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
