Counting matching models…
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Print approx. €6.61–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Print approx. €9.32–€11.39 excl. taxPreliminary estimate for one variant
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
Print approx. €9.31–€11.37 excl. taxPreliminary estimate for one variant
All the parts are sized to print on a 200mm-class printer like an Ender 3. All parts should print without support except the top level of the tower, as it requires an insane amount of tree supports. I've included my gcode file for that…
Print approx. €14.14–€17.28 excl. taxPreliminary estimate for one variant
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for PETGSource material: PET
Made this little Steal Your Face drink coaster. It's kinda goovy. UploadedV2 file adding different level heights to the background area to facilitate filament color change option. The uploaded g-code file has color changes posted.
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
The goal was to enable an easy change of focus while using the exisiting mount system created by Sneaks
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This device combines two CMC Clutch handles to make it easier and uniform when working in dual tension setups for Technical Rescue Teams. We nicknamed it the keyhole. Designed using TinkerCAD
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
This is a remix of the electronics box lid designed by 'the freewheeler'. I love the Apple Mac Pro “Cheesegrater” lattice and thought the electronics box cover would be a perfect place for this. Printed this lid in PLA, Silk and PETG with…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
printed in PETG, 0.15mm layer height and 60% infill. The nut is " M10x1.5_Knurled_Nut_SLIM" by Jorg scaled to 102%
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
General idea Placing a 40x40x4 concrete slab under your 3D-printer significantly reduces noise/vibration transferred to the enclosure. Placing the slab on top of the LACK table causes reduced height needed for the printer PRUSA MK3S+ with…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by https://www.thingiverse.com/thing:2985668, but it was too big for what I needed, so here's a smaller version (prints in less than 2 hours). Very useful for seedling trays, especially those living in apartment balconies :) To…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure can provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This external housing (new version) has space for a small standard humity / thermometer modul. You can fix it with only one 3 mm screw on a existing hole in the i3mk3s metal frame without disturbing (I hope) other moving parts. The…
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for PETGSource material: PET
Grate or vent for dust collection hoods you might use behind a lathe or miter saw. Mine is sized to fit a PSI Woodworking “Big Gulp” dust hood that mostly I use on the lathe or behind my belt sander, but this might work for other hoods…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Photo Measurement Stand – Sample Platform with Scale Frame Dieser Foto-Messständer dient zum Fotografieren und Dokumentieren Objekte und Proben. Er kombiniert eine Probenplattform mit einem L-förmigen Maßstabsrahmen. Die horizontale und…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for one variant
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Custom Chessboard with Extra Features This chessboard is a bit special with its optional built-in defunct Prusa Steel Sheet (MK3.x/MK4.x), allowing you to use magnetic pieces that stay put and don’t slide around during the game. Plus, you…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
Updates 2023/04: Improved tolerances on the housing and made the fit a little more forgiving, as some users reported difficulties getting the housing in place (v2.1). This version also includes improved cable clips. Drawer version v2 fits…
Here you got is the first Deltaprints desk organizer designed with an integrated smartphone holder, compatible with all common phone sizes. It features multiple compartments for pens, office supplies, keys, or any little clutter that…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Added additional versions; now includes battery holders for AA, AAA, C and 18650 cells (all printed and tested but the 18650 up to now) There is a perfect design out there like this for 18650 - couldn't find this for AA batteries.…
Stealth Skirts für VORON 2.4 R2 - 250 / 300 / 350 UPDATE 05.05.2024: Die CAD Dateien stehen nun ebenfalls als Download zur Verfügung. Der Displaymount für das PiTFT50 V2 / V2.1 wurde ergänzt Da mir die Stealth Skirts von Maverick an…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
UPDATE 05.05.2024: Die CAD Dateien wurden auf den aktuellen Stand gebracht. Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab. Der Displaymount…
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…
This is a tool to assist in the migration of a Cisco or Meraki switch with a new Cisco or Meraki Switch. You would move the existing cables from the old switch to the tool allowing you to keep the cables in the same port locations. Then…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
Watch here: https://youtu.be/ksjo8uYzGgk Rugrats was one of my favorite childhood shows. So when it got suggested during one of my streams that we make Reptar, I knew we had to do it. I'm really happy with how it came out. :) Printer:…
This is a replacement for the air stripper and baffle assembly on the Umarex Gauntlet pellet rifle. Prints in one piece, muzzle-end-down with no supports needed. I saw a noticeable decrease in firing noise after replacing the factory…
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Tunnel for wooden trains (BRIO, Ikea LILLABO, Eichhorn etc) with an overpass crossing the mountain. This is really just a merge of the 2 source STLs, so all creative credit goes to those creators: https://www.thingiverse.com/thing:4971864…
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
Pls leave a like for the model - its a simple contribution for the work - THX Print with durable material (PETG, ASA etc.) if you want to use the GoPro connector, consider using 20%-25% infill for printing. 2 Versions available one will…
If you read this, please leave a ❤! Even if you don't have the enclosure, consider printing my other version instead :) It makes the plates much easier to access Slide your extra steel sheets into the rack. Sits nice and cozy under the…
This is my first model and it worked out quite nicely. The candle will have 76mm diameter. You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough. I printed it…
Flashforge AD5X LED Lighting Mod – Cable Track Integration While optimizing LED placement on the Flashforge AD5X, I identified the side-mounted cable management channels as an ideal mounting solution. These tracks offer direct routing…
** Updated April, 2022 All of the code/files are contained within GitHub - GutterDrainGrate I would recommend either pulling via git: ```shell git clone https://github.com/jshessen/GutterDrainGrate.git ``` or downloading the repo as a zip…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
Raspberry Pi 4 Model B case with fan integrated. Needed M2,5 screws etc.. see photo for sizes. A Noctua NF-A4x10 5V fan You can connect the fan to the 5Volt circuit on the Raspberry Pi or .. as I did to the 3.3V circuit on the Raspberry…
The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Remix from : 67961-deburr-tool-holder-entgrater-halter thanks to Sango
Bring light into your prints! ✨ The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside . Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created…
Articulated grateful dead dancing bear. There are two versions. One has a keychain loop on the head, the other does not. This model does not require supports nor a brim. As for scaling: I suggest looking at your slicer output to determine…
This is the upgraded 3D-printed enclsoure featuring a triangular prism-like shape rear support with margin for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL, is a versatile e-ink development solution. It…
There are three versions, 60mm, 75mm and 90mm widths. The struts came from the Integrated Auto-Rewinder Spool Holder for Repbox. I've removed the logo and added magnets to the feet to keep them stationary. A big thank you goes to…
Following the print settings specified in the Sherpa Mini github , print the main body, idler arm, and front cover. Also print the stock rear housing from the Sherpa Mini github . Remove the modeled-in support from the switch recess in…
💧🍴 About ⚠ The cover photo features version 1. 📸 The rack's design is based on a contoured base tray with a sloped interior. A fixed drainage spout is mounted at the lowest point of the tray, extending beyond the base's edge. When placed…
Pocket Screwdriver is a compact, portable screwdriver with built-in storage for three bits. It uses a standard drill bit extender (required) and is designed for everyday carry. Two versions are included: a single-color solid model and a…
update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…
Combined the hook into one design to allow for less scaling, and more places to attach studs
These boxes are a perfect complement to NTX9's Organic Chess 2021 chess pieces. The trays that he designed are changed into boxes with lids that can be assembled into a full 8x8 chess board, so you can have everything that you need to…
This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
Title: 3D Printed "Thank You" Keychain with Heart: A Perfect Token of Appreciation This is a charming and meaningful keychain design featuring the message "Thank You" elegantly integrated with a heart. It's a perfect small gesture to…
My version of integrated circuit lcd cover for prusa mk3s+ Print instructions 0.2 - 20% infill prusament petg orange and galaxy black
Case with snap on lid for OpenDTU with 0.96 OLED Display. https://github.com/tbnobody/OpenDTU This case is based on Case for OpenDTU Breakout Board by bjoerns1983 Hardware i used for this: ESP32 NodeMCU with CP2102 NRF24L01+ with…
UPDATE 24.11.2023 Thanks to the feedback from “chochi3D” i was able to optimize the overall stability of this spoolholder. The following changes helped improving the stability: using 2 bearings for the one-sided mounting option (can also…
Three different styles of mushroom shelves that removes the need to have a water tray under your planter since the grate will catch the water. You can have odd-shaped planters like this little dude with dangling legs, but the drainage is…
Printed with PETG 0.2mm layer height, 30% infill. In the folder knob by size : all knob from each size is on the plate and the print stop to insert the nut is preseted. In the folder Individual knob : Every file is sort by size for the…
from the dark place where the sewers meet the swamplands. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
This is a 3-piece cable reel that has a print-in-place handle. It was designed for some LED Christmas lights but will work with other cables as well. If you're cable doesn't fit the holes at the inner part of the reel to hold it in place,…
3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…
This is an easy to print multi-color Grateful Dead logo. The provided gcode and 3mf files are sliced appropriately to achieve the expected colors. Color order is Blue >> Red >> White >> Black.
This is a remix of the Original Bondtech BMG Upgrade extruder to integrate the new MK3S filament sensor. Work only for Bear X axis. I did also some modifications to be friendly printable with FDM printer. I added a version of the extruder…
I wanted to have a more narrow version to install 5 spools beside each other in the available space. Since the printer had enough printing space to produce two stands at once I decided to handle pairs with a double stand, causing the…
This is my take on the idea of a bag clip with a screw lid. The main benefit is that you don't need to take it off to get something out of the bag. Why do you want my version? You don't need a third hand to put this on since the middle…
Printed on the prusa mini+ with 0% infill.
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
Aufbewahrung Box für ein Entgratungs Tool. (MEISTERGRIFF) 2xM3x30mm 2xM3x40mm Magnet 10x3mm / 10x2mm
Square Pot with Integrated Tray - all you need to do is plant your flower inside. 8 different sizes. Smallest 40x40 to 180x180. Rectangular versions (80x100, 100x140, etc.. ) available here:…
I started with the double stand by Robert Schiele, and after cutting down and testing I decided to build a stronger stand. Not as elegant as the original as it requires supports and is a slicer special, but is entirely functional. I…
A quick remix of the stock MMU2 Selector Plate and the tapered thread PTFE coupler from https://www.thingiverse.com/thing:1993384 I mashed these parts together as I was getting a bit tired of the stock festo coupling cutting into my PTFE…
Print it exactly the same as you would the original. Crosshair flat on the bed and no supports. PLA is fine.
Strong mount system for a Shark Cordless Stick Vacuum (IZ202UK), although should fit other Shark cordless vacuums too with similar handles. There are 3 integrated cable clips to manage the charging cable and position it at the top where…
Don't want to print? Buy from me directly! >>> Craftedcarving.com Tune your snowboard/skis at home with these clamps! 2" or 3" Clearance for all tables/workbenches Mostly 3D printed: PETG/ABS, TPU Non-Printed Items: ¼-20 Threaded Rod…
G2XL (Galileo 2-Z) Stealth Skirts für VORON 2.4 R2 - 300 & 350 UPDATE 07.04.2025: Fehler in den Front Skirts links und rechts, sowohl HEX als auch Cheesegrater Design behoben. Der build-in-support war hohl und hat sich nicht korrekt…
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
Oster Serviettenring, Nakpin ring easter bunny
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Hier ist ein Halter für den Parkside Handentgrater zur Montage an der Werkzeugwand. Here is a holder for the Parkside hand deburrer for mounting on the tool wall.
Printed without support, which made the last-minute print quite tense. If I were to print it again, I would definitely create a support under the large arch in the middle to ensure smoother printing. However, despite the suspense, the end…
This versatile 3D-printable wall vase is designed for both wall mounting and standalone use. Whether you choose to hang it on your wall or place it on a flat surface, this vase adds a touch of elegance to any room. Features:…
Corne Highpro Case With Integrated Plate Files included for both 5 and 6 column versions Required Hardware 18 x M2 heatset inserts (holes are 3.6mm diameter so most M2 inserts should work) I used…
Redesigned X-carriage for the Voron Legacy to use BLTouch probe instead of inductive probe. Also changed to use CW2 style extruder mounting. Both Stealthburner and Afterburner use the same mounting so either works. Adjusted cutouts in the…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
This a remix of VincentGroenhuis's Integrated Auto Rewinder, sized to fit jterranella's RepRewind stand so five of them can fit inside the RepBox 2. The scad is the work of VincentGroenhuis, I merely changed the dimensions to fit the…
Summary: Grateful Dead Dancing Bear Magnet (1 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary. Print settings: PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill,…
I liked very much the model by @3Dservis for a pirate doll my wife is doing. The hinges did not convince me so that is why I modelled integrated ones.
Bondtech INDX system, files origin from https://github.com/BondtechAB/INDX I have painted this toolhead step file and separated each component to STL, so you don't have to I also share you a Blender file for rendering
![Reptar [Rugrats]](https://media.printables.com/media/prints/13476/images/120547_1702486a-3648-4abc-b4ce-ad0526b59aa4/img_1124_13476.jpg)
