17,453 models
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
I'm a big fan of the #Gridfinity storage system that Zack Freedman put together, so modified the shelf with a 3x2 gridfinity weighted baseplate!
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Wanted a way to find and store my Micron pens better. This is a nice stackable setup that holds them tight while still allowing easy assess. Fully stackable These are pretty customized to the Micron but happy to share the fusion file for…
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
quick access to scalpel and other tools
This is a 3x4 holder designed for spade bits. It supports imperial (inches) 1-1/2, 1, 7/8, 13/16, 3/4, 5/8, 1/2, 3/8. There is an extra 1 inch slot, for all those folks that have an extra spade bit, but don't know where it came from.
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a 2x4 Gridfinity bin designed to hold 140mm tall Field Notes notebooks. A single bin can hold 12-16 notebooks depending on how tightly you want to pack them. Once filled with Field Notes notebooks, the overall height is roughly…
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
Holds 4 Brother TZ style printer cartridges, used in a P-Touch printer, in a 2x2 Gridfinity space. They are held ‘vertically’ so that they take up minimal gridfinity squares on your baseplate. There are no magnet holes in the base as this…
Gridfinity baseplate to hang to a Kupper (Küpper/Kuepper) pegboard (UE/EU/DE pegboard). Printed in PLA, it needs brim or adhesion disks under the pins (already present in the .3mf file). If you like it or you're having problems with it,…
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
A Gridfinity tool holder for an iFixit Kit.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for one variant
I purchased a new USGeneral (Harbor Freight) Series 3 42" toolbox (top and bottom). The top toolbox has wide drawers on the left, and narrow drawers on the right. This model is for a Gridfinity base that fits perfectly inside the narrow…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Socket holder ½ to ¾ sae The socket holder uses a gridfinity 2x4 bin. Its made for sae sockets ½, 15/32, 7/16, 3/8, 5/16, 9/16, 19/32, 5/8, 21/32, 11/16 and 3/4. Used with 1/2" drive ratchet. Print “standing” with 10% gyroid/grid infill…
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Socket holder 1-1/4 to 25/32 sae The socket holder uses a gridfinity 2x5 bin. It's made for sae sockets 1-¼, 1-3/16, 1-1/8, 1-1/16, 1", 15/16, 7/8, 13/16 and 25/32 (Biltema). Used with 1/2" drive ratchet. Print “standing” with 10%…
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Socket holder 5/32 - 1/2 sae, 1/4" drive ratchet The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 5/32, 3/16, 7/32, 1/4 9/32, 5/16, 1/32, 3/8, 13/32, 7/16 and 1/2. Print “standing” with 10% gyroid/grid infill and no…
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
Gridfinity cutlery storage, probably won't work with yours Step files included
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
To be used with the Screwiverse inserts.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Socket holder 9/16 - 3/4 sae, 3/8" drive ratchet. The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 9/16, 19/32, 5/8, 11/16 and 3/4. Print with 10% gyroid/grid infill and no support. You can hang it on a peg board or…
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Holds 25 spools of thread that are 30mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Reuploaded version 1 to better…
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Remix of Gridfinity Swann Morton scalpel holder . This model holds up to two scalpels and has space for extra blade storage like the original. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the…
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
A gridfinity charger for your Sonicare Toothbrush.
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
This is a storage tray for the E3d V6 Nozzle Fun Pack . It a 2x1 half height tray for the Gridfinity system by Zac Freedman . Though the pack already comes in a nice Altoids style container, this takes up less space and each nozzle size…
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
A Gridfinity bin for the Porter Cable Router Template Guide Set. The set is the 42000, and each of the guides have the cooresponding ID etched into the hole. The gridfinity bin is 4x2. It is for the PORTER CABLE Router Template Guide Set…
Print approx. €11.01–€13.45 excl. taxPreliminary estimate for one variant
A holder in the same fashion as the 4 piece, but for a full seven! Holds: 10", 6", 3", 1.5", universal, 3/8" to ½", 3/8" to ¼"
This 1x1 gridfinity module holds a 35mm flashllight vertically. Prints without supports. Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman https://www.youtube.com/c/ZackFreedman License: CC…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
Today I designed a whole collection of Gridfinity bins tailored specifically for the drawer beneath my monitor. Each bin has a different purpose, turning the drawer into a clean, organized workspace: Pen Grabber Bin — holds 6 pens with…
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for one variant
Get rid of the clutter and print up a couple of these in vase mode. Be sure to print plenty of solid layers so that vase mode works. I think about 6mm will do it.
Organize up to 8 V6 nozzles with this fast-printing gridfinity-compatible nozzle box, then get back to printing! Total print time is around 40-50 min. Inner organizer The organizer insert is especially designed to print in vase mode,…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Stackable Gridfinity battery bin, size 1x2x5, for 9 CR2 batteries, or 10 batteries if you don't care about the ability to be able to stack the bins. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Box für 7 Holzbohrer von 3mm - 6mm im Gridfinity Design
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
update Added model 813R. It is traced and drawn from a photograph. Noticed by @nargalzius_2055552 . Thanks. https://www.printables.com/model/871655-wera-813r-torx-set-storage-bin Description gridfinity tray for Wera 813R screwDriver. This…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
Remix of https://www.printables.com/model/484070-stand-holderorganiser-for-dremel-versaframe-2200-t to include a gridfinity base
Vase Mode: Set >6mm of solid base layers. Vase Mode is hard to find in Gridfinity multi-square configurations, but for good reason. The space in the base makes you print about 5mm of solid base layers to make it work. Unfortunately,…
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
A gridfinity bin for a Fiscars Pro. It is a low as it can get. It fits in my drawer with 1mm left :-)
A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
I love the Gridfinity Carousel and thought it would work PERFECTLY for storing my Citadel Paints. It needed the hole all the way through so it has clearance. Works perfectly, only make sure you aim the Citadel paint off a little, or the…
I designed the tray for my Multifix holders to store them in the workbench. Printed with PLA @ 0,25mm an 0,6mm nozzle.
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
designed to use M3 20-22mm screws and heat inserts.
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
A 3x4x4 gridfinity storage tray for eighteen Hex shanked HSS drill bits. Comprises of a tray and two, clip in, hinged, bit holders. The two bit holders are numbered to indicate drill bit diameters from 2mm to 10mm in 0.5mm steps. The tray…
This GRIDFINITY tray is design to store 5 µSD with an SD adaptation in a box
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
This cradle lets you organize your Vanmoof S3 toolkit, in the gridfinity universe.
Print approx. €17.10–€20.90 excl. taxPreliminary estimate for one variant
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
Print approx. €12.33–€15.08 excl. taxPreliminary estimate for one variant
Gridfinity 5x3 Holder, designed to perfectly accommodate your Wolfcraft circle cutter. Contains magnet holes and can be stacked.
Print approx. €12.63–€15.44 excl. taxPreliminary estimate for one variant
