Counting matching models…
The Grippy Broom Holder is an upgraded version of the original Broom Holder, designed to provide even more holding force. It features four TPU ribbed grip inserts that are glued to the inside of the holder, creating extra friction to keep…
Needed some guitar picks, printed them with some grip.
!!Important!! - measure the length of your M-Lok slots if they are 32 use the normal if they are 32.3~ use the wide varients The model was remodeled since it the tabs in the back were not centered but it keeps the original size of the…
made to fit those Keycaps shown in cover: Choc keycaps
Potentiometer knobs with a nice grippy texture. There are four internal sizes to fit most potentiometers : standard 6mm diameter standard 6mm diameter with a deeper hole to cover the fixing nut larger 6.35mm diameter (often used on…
GRIPPYSHEET STUDIO IS NOW AVAILABLE AT https://studio.grippysheet.com GrippySheet grip tape solution with innovative ConeControl technology /s Recommended print settings: 3 wall loops 3 top/bottom layers (2 for bottom will also work for…
This remix to the Twist Lock Coffin adds extra surface area to the topper and gear for a better grip when glued. Download the rest of the model here. https://www.youtube.com/watch?v=I43jpT7pjNc Options Plain Skull & Scratch Skull Scratch…
***06/27/23*** V2 - fixed a couple things in the model and made the top more rounded to look more like the original inspiration Really enjoyed the MK3S knob that Vission made so I remade it to the best of my ability for my MK4 Pretty low…
Small simple mod for the Clicky-Clacky Fridge Door made by whoppingpochard. Me and STONEDMAKKER went back and forth about making the already awesome handle even better. We both wanted a space for the fingers to grab on to the handle to…
Modified @Matt3D's excellent design with a longer, knurled exterior for better grip. Print suggestions: Note that this remix, like the original, prints very large . Maybe larger than you want. I've found that printing at 50% is plenty…
This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…
Same as the remixed model just there have either 1 or 2 cable clip spots and a smooth or grippy top. If you do make one go ahead and leave a make post ! (If you aren't too lazy xd)
Just a simple grippy to attach to an sma connecter. can be printed out of tpu or petg
grippy chopsticks. one right handed chopstick file and one left handed chopstick file ;). i printed them laying down cause i though that would be the strongest but you can do whatever you like Print Settings Printer: anycubic Rafts: No…
My bike had some old pedals that had huge gaps and were very noisy. I disassembled them, got the shaft out, and redesigned from scratch the whole body of the pedals. I used one extra 608 bearing at the outer part for more support and…
Just some Handles with rounded corners and a grippy profile in M3/M4/M5
Made by a series of subtractions to the geometry of VOW XR Mushies V2 Grip and the GrippySheet. These can be used as a stencil for a grip pattern of your choice. Simply open a sheet of your grip pattern in CAD, extrude one of these…
Inspired by the cap of my 3D Connexion Space mouse, i decided to design a knob with the intention to mount it to a PWM dimmer. It should fit any potentiometer with a 6mm toothed shaft and be a pressfit. The knob is approx. 45mm in…
The Flexure Fractal Vise Jaws by @BubsBuilds is pretty neat and functional. I wanted some soft grippy booties to protect delicate parts from scratches. It prints without fuss as is with SainSmart TPU . If you want a tighter or looser fit,…
These stick ends provide a lot more grip and comfort than standard ones, they are slightly higher, thicker, and have lots of small spikes which provide great grip, but don't hurt the finger. Works perfectly with hybrid grip, but will also…
I included a version with a poop emoji embossed on the top, and one with a blank surface. The knob is friction fit onto the dial. I included the Fusion360 file if you'd like to remix! I printed mine at with the 0.15 mm detail PrusaSlicer…
I have added lipped edges to provide a much better in place fixing to the base plate for better height and tile stability. I have tested this with PETG using JDO's basic tile…
This must be printed with supports. I used the default Cura supports, but I think I would have had an easier time had I gone with Tree supports. When I removed the supports, I did break a couple of the mushroom tabs off by accident, but…
Has a grippy grip on top of the Lego tile. I used it as mud tracks for a mini car.
Included is the base model from a user on Thingiverse, the remix with the GrippySheet pattern, and a DXF for recreational use. Original model can be found here
Grippy Can Holder is a stylish and ergonomic beverage sleeve designed to fit standard 330ml cans. The curved side cutouts not only create a modern look but also provide improved grip and comfort when holding the drink. 🔹 Designed for easy…
I had some requests to make the exterior of the container more grippy since the knurling was mainly esthetic, and after some tinkering this is the result i came up with. (Exact same design but with a different exterior.) Feel free to give…
Recommended print settings (For dock pads) included a plain one 3 wall loops 3 top/bottom layers (2 for bottom will also work for more squish) 15% honeycomb infill Other recommendations: Use a 0.4mm nozzle to ensure the spikes are printed…
A pinky from the v2 prosthetic arm. Bumps have been added. Filament used: http://www.ebay.com/itm/-/111686591901 Print Settings Rafts: Yes Resolution: 0.2 Notes: Bumps added in MeshMixer. Printed in Flexible PLA. Category: Other
I was using a free standing filament stand of my design on top of my Prusa MK3S+ Delack enclosure. It has been working great; however, I recently got an X1C and have become spoiled with being able to leave spools in the AMS without worry…
I've been playing around in CAD trying to come up with a knurling pattern that 3dprints well and offers decent grip. I liked the aesthetics of this pattern so I decided to make a few storage cups/bins to test it out in person. I really…
Like the original but with a grippier ‘foot’ as I found that the original had a tendency for the bottom to pop off. Depending on shrinkage you might have to print at 101%. Additional parts required: 1 x 625ZZ Bearing 5mm x 16mm x 5mm 1 x…
My 3yo Son has a battery car he cruses around our property on, however the wheels that come with it have no grip in mud, rock or any incline. I designed some mud terrain wheels with a spiderman hub cap to hide the bridging when you print.…
Reuse your old silicone bed mounts into four very grippy feets. I was tired of my Ender 3 V2 moving on it's own with the stock bad feets. I also needed to raise the whole machine to convert it to the Voron theme. So I took some time in…
So you’re cleaning your build plate in the sink with geyser-hot water and dish detergent, desperately trying to avoid scalding your hands while performing the delicate ballet of not touching the plate with your fingers . Sound familiar?…
I always lose my grip playing with smooth picks, so I made a bumpy one that fits my hand better. Hopefully someone else gets some use out of it as well
I remixed Bart Dring's RJ12 case for the Fluid Dial Pendant which uses and connects to Fluidnc controllers using this RJ12 kit . I added grippy textures to improve handling and aesthetics. I have included the .step files for you to…
Grippy potentiometer knob Standard 6mm diameter Hole is 18mm deep with a wide groove to cover fixing nut Based of @BastienX8 Grippy potentiometer knobs
This is a soft and grippy wheel cover for the Mini Vault with Lever Tumbler from @RoccosStuff for a more comfortable feeling when turning. It can also be used for the remixes from @Naheulbeurk and @GiveMeMyKidsBack There is a small and a…
Printed with Creality Hi and Rosa3D Basic PLA at 0.1mm layer height
I recently bought a Nook Glowlight Plus to replace a dead Nook Simpletouch Glow and quickly found that I hated the new design. Instead of a nice grippy back the new model has got a slippery metal back which is hard to hang on to, and even…
Variation of my knob that can be illuminated from below Should fit together snug but might require glue
Added 'fingers' in octagonal rings around both sides of the bench cookie insert. Fingers are 1MM wide, 1MM spaced, and 2MM deep. The printed cookie insert is fully compatible with moose0003's BenchCookie_Body or could be used on their own.
For use with GrippySheet Studio https://studio.grippysheet.com
Grandma was having trouble to open the slippery Bottlecaps, so i made these sleeves that simply push onto the original Bottlecaps. No Glue needed. I printed in Extrudr Medium TPU but other TPU's should be fine too.
Helps to wind up the mechanism and self-centers the filament spool.
I recently printed some TUSH rollers for use when I didn't want to load up one of my dryboxes with filament. They're elegant, but the stability leaves something to be desired. I saw a stabilizer foot on Printables (credit at bottom) and…
Inspired by https://www.printables.com/model/629811-a-more-grippy-clicky-clacky-handle, applied the same idea to the ColonyClacker handle
If you find modern sewing machine's wheels too slippery, this model is for you. Well, this particular one is for Singer 14T968DC serger/coverstitch but its wheel is slippery too. Designed to print with slightly flexible filament I have,…
Dual-material, large drink coaster. I designed this to solve a couple problems. 1) I've got a wire dog crate next to my recliner, and needed a coaster large enough to cover multiple metal wires. 2) I wanted a coaster with some grip to it…
An doorstop with two different grip-patterns, to ensure an strong grip, even on smooth or wet surfaces.
https://makerworld.com/en/models/2312189-mod3-vfg-pack-v1-2#profileId-2524290 This is a shortcut for you on MOD3 VFG V1.2 by Qwerm, if you want the picatinny version. Just open the project and print and it will include the fuzzy skin…
Very nice case modeled by Zibibbo, but now with grippied surface edited online in CNC kitchen's https://bumpmesh.com/
Rep your Nothing gear by branding the brandless with this textured case. Great in multi-material, or sleek and subtle in single material. Embossed text provides grip for holding the phone in the left hand, and is nice for texture…
Are you fed up with miniatures sliding off terrain, but have some flexible (TPU) filament lying around? Do your miniatures already have magnetized bases? Here's the solution! Print movement trays with one (or two) layers of soft filament…
added grip indentations to the lid, extruded the SVG of the tools into STL using tinkercad.
EDIT: Either printables image compression or the browser I'm viewing this in really has trouble with showing this pattern without it looking very ugly and noisy. View the 3d model directly to get a better sense of what the output will…
This is a replacement for the Xbox One/Series controller thumbsticks. If yours has worn, this will give it new life. Compared to other models out there, this one will a) be grippier and b) is customizable, as the .scad file ships with it…
This is an adaption inspired by: & I'm not labeling as a remix because I didn't use their models, but rather used theirs as inspiration for my own bottom up design. Not sure if this is a correct label, but there is the logic. The…
I used the open source tool made by CNCKitchen called BumpMesh to create a grippy texture on both the 45 degree left handle, as well as the film back door. This means you no longer need to use the fuzzy skin mask or print anything with…
This tensioner is designed for a stronger grip on the guy line than a smooth slider gives. The line runs through a ridged channel in the raised block, so tension on the standing line pulls the cord into the teeth and holds it. You can…
This is a knob cover for the Ableton Push 3 jog dial that improves on several other knob covers I have seen. The cutout star on the top allows you to spin the dial with a single finger on top with perfect grip, while still allowing the…
A thing to clip and grip fabric to a cord or bungee. If you get the diamerter right it is fairly grippy but once you have positioned it you can secure it by sewing through the side holes. The diameter d is fairly critical, I had to have 3…
Remix cover per raggi (1–20 mm), comprensivo di viti e dadi M5 dedicati, interamente ridisegnati e modellati in Blender. Il Design è stato aggiornato con linee più fluide e stondate.Sono include due versioni di cover, entrambe realizzate…
I always lose my grip playing with smooth picks, so I made a bumpy one that fits my hand better. Hopefully someone else gets some use out of it as well
added grip indentations to the lid, extruded the SVG of the tools into STL using tinkercad.
Added 'fingers' in octagonal rings around both sides of the bench cookie insert. Fingers are 1MM wide, 1MM spaced, and 2MM deep. The printed cookie insert is fully compatible with moose0003's BenchCookie_Body or could be used on their own.
A thing to clip and grip fabric to a cord or bungee. If you get the diamerter right it is fairly grippy but once you have positioned it you can secure it by sewing through the side holes. The diameter d is fairly critical, I had to have 3…
Allen Key holder for multiboard setup. Easily pops on and off of the multiboard rack and securely holds keys. Available in metric or imperial. The design uses a TPU insert to hold allen keys securely. Print the chosen frame, either metric…
This is a knob cover for the Ableton Push 3 jog dial that improves on several other knob covers I have seen. The cutout star on the top allows you to spin the dial with a single finger on top with perfect grip, while still allowing the…
I wanted a thinner version of this pick but did not want to adjust the height it cura because it would also make the grip texture thinner. so I adjusted the thickness in CAD.
Around 4.5cm in diameter, but can be printed pretty much at almost any size (printed a ¼ mini model and it works just as fine. It's not that useful really, but it was a good exercise to find alternative locking mechanisms to screws :/…
Wanted a barbed biscuit for joining nosing to a window jamb. This works a treat, cut biscuits, glue up, knock it all together.
Compliant Door Stopper with spikes to grip better onto carpeted floors.
Hercules encoder knob. A grippy one. Colorful inserts for customisation. Snap fit, no multicolor printer needed. 0.12 layer height is advised.
I love how minimal it is. I printed in petg 255/70, 0.2mm layers, 2 walls, 3 top/bottom layers, 20% cubic infill, tree supports, seam position back, opposite cutter teeth. I'm considering stretching it for 2 inch tapes but it might…
For use with GrippySheet Studio https://studio.grippysheet.com
Allen Key holder for multiboard setup. Easily pops on and off of the multiboard rack and securely holds keys. Available in metric or imperial. The design uses a TPU insert to hold allen keys securely. Print the chosen frame, either metric…
Guitar pick that should be grippier. I have one with holes for grip, and another with ridges for grip. The holes print fine, but the ridges probably need a small raft or need to be printed at a diffrent angle.
I wanted a thinner version of this pick but did not want to adjust the height it cura because it would also make the grip texture thinner. so I adjusted the thickness in CAD.
